package Travel::Status::DE::IRIS::Result;

use strict;
use warnings;
use 5.014;
use utf8;

no if $] >= 5.018, warnings => 'experimental::smartmatch';

use parent 'Class::Accessor';
use Carp qw(cluck);
use DateTime;
use DateTime::Format::Strptime;
use List::Compare;
use List::MoreUtils qw(none uniq firstval);
use Scalar::Util qw(weaken);

our $VERSION = '1.23';

my %translation = (
	2  => 'Polizeiliche Ermittlung',
	3  => 'Feuerwehreinsatz neben der Strecke',
	4  => 'Kurzfristiger Personalausfall',
	5  => 'Ärztliche Versorgung eines Fahrgastes',
	6  => 'Betätigen der Notbremse',
	7  => 'Personen im Gleis',
	8  => 'Notarzteinsatz am Gleis',
	9  => 'Streikauswirkungen',
	10 => 'Ausgebrochene Tiere im Gleis',
	11 => 'Unwetter',
	12 => 'Warten auf Fahrgäste aus einem Schiff',
	13 => 'Pass- und Zollkontrolle',
	15 => 'Beeinträchtigung durch Vandalismus',
	16 => 'Entschärfung einer Fliegerbombe',
	17 => 'Beschädigung einer Brücke',
	18 => 'Umgestürzter Baum im Gleis',
	19 => 'Unfall an einem Bahnübergang',
	20 => 'Tiere im Gleis',
	21 => 'Warten auf weitere Reisende',
	22 => 'Witterungsbedingte Störung',
	23 => 'Feuerwehreinsatz auf Bahngelände',
	24 => 'Verspätung aus dem Ausland',
	25 => 'Warten auf verspätete Zugteile',
	28 => 'Gegenstände im Gleis',
	31 => 'Bauarbeiten',
	32 => 'Verzögerung beim Ein-/Ausstieg',
	33 => 'Oberleitungsstörung',
	34 => 'Signalstörung',
	35 => 'Streckensperrung',
	36 => 'Technische Störung am Zug',
	37 => 'Technische Störung am Wagen',
	38 => 'Technische Störung an der Strecke',
	39 => 'Anhängen von zusätzlichen Wagen',
	40 => 'Stellwerksstörung/-ausfall',
	41 => 'Störung an einem Bahnübergang',
	42 => 'Außerplanmäßige Geschwindigkeitsbeschränkung',
	43 => 'Verspätung eines vorausfahrenden Zuges',
	44 => 'Warten auf einen entgegenkommenden Zug',
	45 => 'Überholung durch anderen Zug',
	46 => 'Warten auf freie Einfahrt',
	47 => 'Verspätete Bereitstellung',
	48 => 'Verspätung aus vorheriger Fahrt',
	55 => 'Technische Störung an einem anderen Zug',           # ?
	56 => 'Warten auf Fahrgäste aus einem Bus',
	57 => 'Zusätzlicher Halt',
	58 => 'Umleitung',                                          # ?
	59 => 'Schnee und Eis',
	60 => 'Reduzierte Geschwindigkeit wegen Sturm',
	61 => 'Türstörung',
	62 => 'Behobene technische Störung am Zug',
	63 => 'Technische Untersuchung am Zug',
	64 => 'Weichenstörung',
	65 => 'Erdrutsch',
	70 => 'Kein WLAN',
	71 => 'WLAN in einzelnen Wagen nicht verfügbar',
	73 => 'Mehrzweckabteil vorne',
	74 => 'Mehrzweckabteil hinten',
	75 => '1. Klasse vorne',
	76 => '1. Klasse hinten',
	77 => 'Ohne 1. Klasse',
	79 => 'Ohne Mehrzweckabteil',
	80 => 'Abweichende Wagenreihung',
	82 => 'Mehrere Wagen fehlen',
	83 => 'Fehlender Zugteil',
	84 => 'Zug verkehrt richtig gereiht',                       # r 80 82 83 85
	85 => 'Ein Wagen fehlt',
	86 => 'Keine Reservierungsanzeige',
	87 => 'Einzelne Wagen ohne Reservierungsanzeige',
	88 => 'Keine Qualitätsmängel',  # r 80 82 83 85 86 87 90 91 92 93 96 97 98
	89 => 'Reservierungen sind wieder vorhanden',                     # -> 86 87
	90 => 'Kein Bordrestaurant/Bordbistro',
	91 => 'Eingeschränkte Fahrradmitnahme',
	92 => 'Klimaanlage in einzelnen Wagen ausgefallen',
	93 => 'Fehlende oder gestörte behindertengerechte Einrichtung',
	94 => 'Ersatzbewirtschaftung',
	95 => 'Ohne behindertengerechtes WC',
	96 => 'Der Zug ist stark überbesetzt',                           # r 97
	97 => 'Der Zug ist überbesetzt',                                 # r 96
	98 => 'Sonstige Qualitätsmängel',
	99 => 'Verzögerungen im Betriebsablauf',

	# Occasionally, there's a message with ID 900. In all cases observed so far,
	# it was used for "Anschlussbus wartet". However, as we don't know which bus
	# it refers to, we don't show it to users.
);

Travel::Status::DE::IRIS::Result->mk_ro_accessors(
	qw(arrival arrival_delay arrival_is_additional arrival_is_cancelled
	  date datetime delay
	  departure departure_delay departure_is_additional departure_is_cancelled
	  is_transfer is_unscheduled is_wing
	  line_no old_train_id old_train_no platform raw_id
	  realtime_xml route_start route_end
	  sched_arrival sched_departure sched_platform sched_route_start
	  sched_route_end start stop_no time train_id train_no transfer type
	  unknown_t unknown_o wing_id)
);

sub is_additional {
	my ($self) = @_;

	if ( $self->{arrival_is_additional} and $self->{departure_is_additional} ) {
		return 1;
	}
	if ( $self->{arrival_is_additional}
		and not defined $self->{departure_is_additional} )
	{
		return 1;
	}
	if ( not defined $self->{arrival_is_additional}
		and $self->{departure_is_additional} )
	{
		return 1;
	}
	return 0;
}

sub is_cancelled {
	my ($self) = @_;

	if ( $self->{arrival_is_cancelled} and $self->{departure_is_cancelled} ) {
		return 1;
	}
	if ( $self->{arrival_is_cancelled}
		and not defined $self->{departure_is_cancelled} )
	{
		return 1;
	}
	if ( not defined $self->{arrival_is_cancelled}
		and $self->{departure_is_cancelled} )
	{
		return 1;
	}
	return 0;
}

sub new {
	my ( $obj, %opt ) = @_;

	my $ref = \%opt;

	my ( $train_id, $start_ts, $stop_no ) = split( /.\K-/, $opt{raw_id} );

	bless( $ref, $obj );

	$ref->{strptime_obj} //= DateTime::Format::Strptime->new(
		pattern   => '%y%m%d%H%M',
		time_zone => 'Europe/Berlin',
	);

	$ref->{wing_id} = "${train_id}-${start_ts}";
	$ref->{is_wing} = 0;
	$train_id =~ s{^-}{};

	$ref->{start} = $ref->parse_ts($start_ts);

	$ref->{train_id} = $train_id;
	$ref->{stop_no}  = $stop_no;

	if ( $opt{transfer} ) {
		my ($transfer) = split( /.\K-/, $opt{transfer} );
		$transfer =~ s{^-}{};
		$ref->{transfer} = $transfer;
	}

	my $ar = $ref->{arrival} = $ref->{sched_arrival}
	  = $ref->parse_ts( $opt{arrival_ts} );
	my $dp = $ref->{departure} = $ref->{sched_departure}
	  = $ref->parse_ts( $opt{departure_ts} );

	if ( not( defined $ar or defined $dp ) ) {
		cluck(
			sprintf(
				"Neither arrival '%s' nor departure '%s' are valid "
				  . "timestamps - can't handle this train",
				$opt{arrival_ts}, $opt{departure_ts}
			)
		);
	}

	my $dt = $ref->{datetime} = $dp // $ar;

	$ref->{date}  = $dt->strftime('%d.%m.%Y');
	$ref->{time}  = $dt->strftime('%H:%M');
	$ref->{epoch} = $dt->epoch;

	$ref->{route_pre} = $ref->{sched_route_pre}
	  = [ split( qr{[|]}, $ref->{route_pre} // q{} ) ];
	$ref->{route_post} = $ref->{sched_route_post}
	  = [ split( qr{[|]}, $ref->{route_post} // q{} ) ];

	$ref->{route_pre_incomplete}  = $ref->{route_end}  ? 1 : 0;
	$ref->{route_post_incomplete} = $ref->{route_post} ? 1 : 0;

	$ref->{sched_platform} = $ref->{platform};
	$ref->{route_end}
	  = $ref->{sched_route_end}
	  = $ref->{route_end}
	  || $ref->{route_post}[-1]
	  || $ref->{station};
	$ref->{route_start}
	  = $ref->{sched_route_start}
	  = $ref->{route_start}
	  || $ref->{route_pre}[0]
	  || $ref->{station};

	return $ref;
}

sub parse_ts {
	my ( $self, $string ) = @_;

	if ( defined $string ) {
		return $self->{strptime_obj}->parse_datetime($string);
	}
	return;
}

sub set_ar {
	my ( $self, %attrib ) = @_;

	if ( $attrib{status} and $attrib{status} eq 'c' ) {
		$self->{arrival_is_cancelled} = 1;
	}
	elsif ( $attrib{status} and $attrib{status} eq 'a' ) {
		$self->{arrival_is_additional} = 1;
	}
	else {
		$self->{arrival_is_additional} = 0;
		$self->{arrival_is_cancelled}  = 0;
	}

	# unscheduled arrivals may not appear in the plan, but we do need to
	# know their planned arrival time
	if ( $attrib{plan_arrival_ts} ) {
		$self->{sched_arrival}
		  = $self->parse_ts( $attrib{plan_arrival_ts} );
	}

	if ( $attrib{arrival_ts} ) {
		$self->{arrival} = $self->parse_ts( $attrib{arrival_ts} );
		if ( not $self->{arrival_is_cancelled} ) {
			$self->{delay} = $self->{arrival_delay}
			  = $self->arrival->subtract_datetime( $self->sched_arrival )
			  ->in_units('minutes');
		}
	}
	else {
		$self->{arrival} = $self->{sched_arrival};
		$self->{arrival_delay} //= 0;
		$self->{delay}         //= 0;
	}

	if ( $attrib{platform} ) {
		$self->{platform} = $attrib{platform};
	}
	else {
		$self->{platform} = $self->{sched_platform};
	}

	if ( $attrib{route_pre} ) {
		$self->{route_pre} = [ split( qr{[|]}, $attrib{route_pre} // q{} ) ];
		$self->{route_start} = $self->{route_pre}[0];
	}
	else {
		$self->{route_pre}   = $self->{sched_route_pre};
		$self->{route_start} = $self->{sched_route_start};
	}

	# also only for unscheduled arrivals
	if ( $attrib{sched_route_pre} ) {
		$self->{sched_route_pre}
		  = [ split( qr{[|]}, $attrib{sched_route_pre} // q{} ) ];
		$self->{sched_route_start} = $self->{sched_route_pre}[0];
	}

	return $self;
}

sub set_dp {
	my ( $self, %attrib ) = @_;

	if ( $attrib{status} and $attrib{status} eq 'c' ) {
		$self->{departure_is_cancelled} = 1;
	}
	elsif ( $attrib{status} and $attrib{status} eq 'a' ) {
		$self->{departure_is_additional} = 1;
	}
	else {
		$self->{departure_is_additional} = 0;
		$self->{departure_is_cancelled}  = 0;
	}

	# unscheduled arrivals may not appear in the plan, but we do need to
	# know their planned arrival time
	if ( $attrib{plan_departure_ts} ) {
		$self->{sched_departure}
		  = $self->parse_ts( $attrib{plan_departure_ts} );
	}

	if ( $attrib{departure_ts} ) {
		$self->{departure} = $self->parse_ts( $attrib{departure_ts} );
		if ( not $self->{departure_is_cancelled} ) {
			$self->{delay} = $self->{departure_delay}
			  = $self->departure->subtract_datetime( $self->sched_departure )
			  ->in_units('minutes');
		}
	}
	else {
		$self->{departure} = $self->{sched_departure};
		$self->{delay}           //= 0;
		$self->{departure_delay} //= 0;
	}

	if ( $attrib{platform} ) {
		$self->{platform} = $attrib{platform};
	}
	else {
		$self->{platform} = $self->{sched_platform};
	}

	if ( $attrib{route_post} ) {
		$self->{route_post} = [ split( qr{[|]}, $attrib{route_post} // q{} ) ];
		$self->{route_end} = $self->{route_post}[-1];
	}
	else {
		$self->{route_post} = $self->{sched_route_post};
		$self->{route_end}  = $self->{sched_route_end};
	}

	# also only for unscheduled departures
	if ( $attrib{sched_route_post} ) {
		$self->{sched_route_post}
		  = [ split( qr{[|]}, $attrib{sched_route_post} // q{} ) ];
		$self->{sched_route_end} = $self->{sched_route_post}[-1];
	}

	return $self;
}

sub set_messages {
	my ( $self, %messages ) = @_;

	$self->{messages} = \%messages;

	return $self;
}

sub set_realtime {
	my ( $self, $xmlobj ) = @_;

	$self->{realtime_xml} = $xmlobj;

	return $self;
}

sub add_raw_ref {
	my ( $self, %attrib ) = @_;

	push( @{ $self->{refs} }, \%attrib );

	return $self;
}

sub set_unscheduled {
	my ( $self, $unscheduled ) = @_;

	$self->{is_unscheduled} = $unscheduled;
}

sub add_arrival_wingref {
	my ( $self, $ref ) = @_;

	$ref->{is_wing} = 1;
	weaken($ref);
	push( @{ $self->{arrival_wings} }, $ref );
	return $self;
}

sub add_departure_wingref {
	my ( $self, $ref ) = @_;

	$ref->{is_wing} = 1;
	weaken($ref);
	push( @{ $self->{departure_wings} }, $ref );
	return $self;
}

sub add_reference {
	my ( $self, $ref ) = @_;

	$ref->add_inverse_reference($self);
	weaken($ref);
	push( @{ $self->{replacement_for} }, $ref );
	return $self;
}

# never called externally
sub add_inverse_reference {
	my ( $self, $ref ) = @_;

	weaken($ref);
	push( @{ $self->{replaced_by} }, $ref );
	return $self;
}

# List::Compare does not keep the order of its arguments (even with unsorted).
# So we need to re-sort all stops to maintain their original order.
sub sorted_sublist {
	my ( $self, $list, $sublist ) = @_;
	my %pos;

	if ( not $sublist or not @{$sublist} ) {
		return;
	}

	for my $i ( 0 .. $#{$list} ) {
		$pos{ $list->[$i] } = $i;
	}

	my @sorted = sort { $pos{$a} <=> $pos{$b} } @{$sublist};

	return @sorted;
}

sub additional_stops {
	my ($self) = @_;

	$self->{comparator} //= List::Compare->new(
		{
			lists    => [ $self->{sched_route_post}, $self->{route_post} ],
			unsorted => 1,
		}
	);

	return $self->sorted_sublist( $self->{route_post},
		[ $self->{comparator}->get_complement ] );
}

sub canceled_stops {
	my ($self) = @_;

	$self->{comparator} //= List::Compare->new(
		{
			lists    => [ $self->{sched_route_post}, $self->{route_post} ],
			unsorted => 1,
		}
	);

	return $self->sorted_sublist( $self->{sched_route_post},
		[ $self->{comparator}->get_unique ] );
}

sub classes {
	my ($self) = @_;

	my @classes = split( //, $self->{classes} );

	return @classes;
}

sub merge_with_departure {
	my ( $self, $result ) = @_;

	# result must be departure-only

	$self->{is_transfer} = 1;

	$self->{old_train_id} = $self->{train_id};
	$self->{old_train_no} = $self->{train_no};

	# departure is preferred over arrival, so overwrite default values
	$self->{date}     = $result->{date};
	$self->{time}     = $result->{time};
	$self->{epoch}    = $result->{epoch};
	$self->{datetime} = $result->{datetime};
	$self->{train_id} = $result->{train_id};
	$self->{train_no} = $result->{train_no};

	$self->{departure}        = $result->{departure};
	$self->{departure_wings}  = $result->{departure_wings};
	$self->{route_end}        = $result->{route_end};
	$self->{route_post}       = $result->{route_post};
	$self->{sched_departure}  = $result->{sched_departure};
	$self->{sched_route_post} = $result->{sched_route_post};

	# update realtime info only if applicable
	$self->{is_cancelled} ||= $result->{is_cancelled};

	return $self;
}

sub origin {
	my ($self) = @_;

	return $self->route_start;
}

sub destination {
	my ($self) = @_;

	return $self->route_end;
}

sub delay_messages {
	my ($self) = @_;

	my @keys   = reverse sort keys %{ $self->{messages} };
	my @msgs   = grep { $_->[1] eq 'd' } map { $self->{messages}{$_} } @keys;
	my @msgids = uniq( map { $_->[2] } @msgs );
	my @ret;

	for my $id (@msgids) {
		my $msg = firstval { $_->[2] == $id } @msgs;
		push( @ret,
			[ $self->parse_ts( $msg->[0] ), $self->translate_msg($id) ] );
	}

	return @ret;
}

sub arrival_wings {
	my ($self) = @_;

	if ( $self->{arrival_wings} ) {
		return @{ $self->{arrival_wings} };
	}
	return;
}

sub departure_wings {
	my ($self) = @_;

	if ( $self->{departure_wings} ) {
		return @{ $self->{departure_wings} };
	}
	return;
}

sub replaced_by {
	my ($self) = @_;

	if ( $self->{replaced_by} ) {
		return @{ $self->{replaced_by} };
	}
	return;
}

sub replacement_for {
	my ($self) = @_;

	if ( $self->{replacement_for} ) {
		return @{ $self->{replacement_for} };
	}
	return;
}

sub dump_message_codes {
	my ($self) = @_;

	return %translation;
}

sub qos_messages {
	my ($self) = @_;

	my @keys = sort keys %{ $self->{messages} };
	my @msgs
	  = grep { $_->[1] ~~ [qw[f q]] } map { $self->{messages}{$_} } @keys;
	my @ret;

	for my $msg (@msgs) {
		if ( my @superseded = $self->superseded_messages( $msg->[2] ) ) {
			@ret = grep { not( $_->[2] ~~ \@superseded ) } @ret;
		}
		@ret = grep { $_->[2] != $msg->[2] } @ret;

		# 88 is "no qos shortcomings" and only required to cancel previous qos
		# messages. Same for 84 ("correct wagon order") and 89 ("reservations
		# display is working again").
		if ( $msg->[2] != 84 and $msg->[2] != 88 and $msg->[2] != 89 ) {
			push( @ret, $msg );
		}
	}

	@ret
	  = map { [ $self->parse_ts( $_->[0] ), $self->translate_msg( $_->[2] ) ] }
	  reverse @ret;

	return @ret;
}

sub raw_messages {
	my ($self) = @_;

	my @messages = reverse sort keys %{ $self->{messages} };
	my @ret      = map {
		[
			$self->parse_ts( $self->{messages}->{$_}->[0] ),
			$self->{messages}->{$_}->[2]
		]
	} @messages;

	return @ret;
}

sub messages {
	my ($self) = @_;

	my @messages = reverse sort keys %{ $self->{messages} };
	my @ret      = map {
		[
			$self->parse_ts( $self->{messages}->{$_}->[0] ),
			$self->translate_msg( $self->{messages}->{$_}->[2] )
		]
	} @messages;

	return @ret;
}

sub info {
	my ($self) = @_;

	my @messages = sort keys %{ $self->{messages} };
	my @ids = uniq( map { $self->{messages}{$_}->[2] } @messages );

	my @info = map { $self->translate_msg($_) } @ids;

	return @info;
}

sub line {
	my ($self) = @_;

	return
	  sprintf( '%s %s', $self->{type}, $self->{line_no} // $self->{train_no} );
}

sub route_pre {
	my ($self) = @_;

	return @{ $self->{route_pre} };
}

sub route_post {
	my ($self) = @_;

	return @{ $self->{route_post} };
}

sub route {
	my ($self) = @_;

	return ( $self->route_pre, $self->{station}, $self->route_post );
}

sub train {
	my ($self) = @_;

	return $self->line;
}

sub route_interesting {
	my ( $self, $max_parts ) = @_;

	my @via = $self->route_post;
	my ( @via_main, @via_show, $last_stop );
	$max_parts //= 3;

	# Centraal: dutch main station (Hbf in .nl)
	# HB:  swiss main station (Hbf in .ch)
	# hl.n.: czech main station (Hbf in .cz)
	for my $stop (@via) {
		if ( $stop =~ m{ HB $ | hl\.n\. $ | Hbf | Centraal | Flughafen }x ) {
			push( @via_main, $stop );
		}
	}
	$last_stop
	  = $self->{route_post_incomplete} ? $self->{route_end} : pop(@via);

	if ( @via_main and $via_main[-1] eq $last_stop ) {
		pop(@via_main);
	}
	if ( @via and $via[-1] eq $last_stop ) {
		pop(@via);
	}

	if ( @via_main and @via and $via[0] eq $via_main[0] ) {
		shift(@via_main);
	}

	if ( @via < $max_parts ) {
		@via_show = @via;
	}
	else {
		if ( @via_main >= $max_parts ) {
			@via_show = ( $via[0] );
		}
		else {
			@via_show = splice( @via, 0, $max_parts - @via_main );
		}

		while ( @via_show < $max_parts and @via_main ) {
			my $stop = shift(@via_main);
			if ( $stop ~~ \@via_show or $stop eq $last_stop ) {
				next;
			}
			push( @via_show, $stop );
		}
	}

	for (@via_show) {
		s{ \s? Hbf .* }{}x;
	}

	return @via_show;

}

sub sched_route_pre {
	my ($self) = @_;

	return @{ $self->{sched_route_pre} };
}

sub sched_route_post {
	my ($self) = @_;

	return @{ $self->{sched_route_post} };
}

sub sched_route {
	my ($self) = @_;

	return ( $self->sched_route_pre, $self->{station},
		$self->sched_route_post );
}

sub superseded_messages {
	my ( $self, $msg ) = @_;

	my %superseded = (
		84 => [ 80, 82, 83, 85 ],
		88 => [ 80, 82, 83, 85, 86, 87, 90, 91, 92, 93, 96, 97, 98 ],
		89 => [ 86, 87 ],
		96 => [97],
		97 => [96],
	);

	return @{ $superseded{$msg} // [] };
}

sub translate_msg {
	my ( $self, $msg ) = @_;

	return $translation{$msg} // "?($msg)";
}

sub TO_JSON {
	my ($self) = @_;

	my %copy = %{$self};
	delete $copy{arrival_wings};
	delete $copy{departure_wings};
	delete $copy{replaced_by};
	delete $copy{replacement_for};

	return {%copy};
}

1;

__END__

=head1 NAME

Travel::Status::DE::IRIS::Result - Information about a single
arrival/departure received by Travel::Status::DE::IRIS

=head1 SYNOPSIS

	for my $result ($status->results) {
		printf(
			"At %s: %s to %s from platform %s\n",
			$result->time,
			$result->line,
			$result->destination,
			$result->platform,
		);
	}

=head1 VERSION

version 1.23

=head1 DESCRIPTION

Travel::Status::DE::IRIs::Result describes a single arrival/departure
as obtained by Travel::Status::DE::IRIS.  It contains information about
the platform, time, route and more.

=head1 METHODS

=head2 ACCESSORS

=over

=item $result->additional_stops

Returns served stops which are not part of the schedule. I.e., this is the
set of actual stops (B<route_post>) minus the set of scheduled stops
(B<sched_route_post>).

=item $result->arrival

DateTime(3pm) object for the arrival date and time. undef if the
train starts here. Contains realtime data if available.

=item $result->arrival_delay

Estimated arrival delay in minutes (integer number). undef if no realtime
data is available, the train starts at the specified station, or there is
no scheduled arrival time (e.g. due to diversions). May be negative.

=item $result->arrival_is_additional

True if the arrival at this stop is an additional (unscheduled) event, i.e.,
if the train started its journey earlier than planned.

=item $result->arrival_is_cancelled

True if the arrival at this stop has been cancelled.

=item $result->arrival_wings

Returns a list of references to Travel::Status::DE::IRIS::Result(3pm) objects
which are coupled to this train on arrival. Returns nothing (false / empty list)
otherwise.

=item $result->canceled_stops

Returns stops which are scheduled, but will not be served by this train.
I.e., this is the set of scheduled stops (B<sched_route_post>) minus the set of
actual stops (B<route_post>).

=item $result->classes

List of characters indicating the class(es) of this train, may be empty. This
is slighty related to B<type>, but more generic. At this time, the following
classes are known:

    D    Non-DB train. Usually local transport
    D,F  Non-DB train, long distance transport
    F    "Fernverkehr", long-distance transport
    N    "Nahverkehr", local and regional transport
    S    S-Bahn, rather slow local/regional transport

=item $result->date

Scheduled departure date if available, arrival date otherwise (e.g. if the
train ends here). String in dd.mm.YYYY format. Does not contain realtime data.

=item $result->datetime

DateTime(3pm) object for departure if available, arrival otherwise. Does not
contain realtime data.

=item $result->delay

Estimated delay in minutes (integer number). Defaults to the departure delay,
except for trains which terminate at the specifed station. Similar to
C<< $result->departure_delay // $result->arrival_delay >>. undef if
no realtime data is available. May be negative.

=item $result->delay_messages

Get all delay messages entered for this train. Returns a list of [datetime,
string] listrefs sorted by newest first. The datetime part is a DateTime(3pm)
object corresponding to the point in time when the message was entered, the
string is the message. If a delay reason was entered more than once, only its
most recent record will be returned.

=item $result->departure

DateTime(3pm) object for the departure date and time. undef if the train ends
here. Contains realtime data if available.

=item $result->departure_delay

Estimated departure delay in minutes (integer number). undef if no realtime
data is available, the train terminates at the specified station, or there is
no scheduled departure time (e.g. due to diversions). May be negative.

=item $result->departure_is_additional

True if the train's departure at this stop is unscheduled (additional), i.e.,
the route has been extended past its scheduled terminal stop.

=item $result->departure_is_cancelled

True if the train's departure at this stop has been cancelled, i.e., the train
terminates here and does not continue its scheduled journey.

=item $result->departure_wings

Returns a list of references to Travel::Status::DE::IRIS::Result(3pm) objects
which are coupled to this train on departure. Returns nothing (false / empty
list) otherwise.

=item $result->destination

Alias for route_end.

=item $result->info

List of information strings. Contains both reasons for delays (which may or
may not be up-to-date) and generic information such as missing carriages or
broken toilets.

=item $result->is_additional

True if the train's arrival and departure at the stop are unscheduled
additional stops, false otherwise.

=item $result->is_cancelled

True if the train was cancelled, false otherwise. Note that this does not
contain information about replacement trains or route diversions.

=item $result->is_transfer

True if the train changes its ID at the current station, false otherwise.

An ID change means: There are two results in the system (e.g. RE 10228
ME<uuml>nster -> Duisburg, RE 30028 Duisburg -> DE<uuml>sseldorf), but they are
the same train (RE line 2 from ME<uuml>nster to DE<uuml>sseldorf in this case)
and should be treated as such. In this case, Travel::Status::DE::IRIS merges
the results and indicates it by setting B<is_transfer> to a true value.

In case of a transfer, B<train_id> and B<train_no> are set to the "new"
value, the old ones are available in B<old_train_id> and B<old_train_no>.

=item $result->is_unscheduled

True if the train does not appear in the requested plans. This can happen
because of two reasons: Either the scheduled time and the actual time are so
far apart that it should've arrived/departed long ago, or it really is an
unscheduled train. In that case, it can be a replacement or an additional
train. There is no logic to distinguish these cases yet.

=item $result->is_wing

Returns true if this result is a wing, false otherwise.
A wing is a train which has its own ID and destination, but is currently
coupled to another train and shares all or some of its route.

=item $result->line

Train type with line (such as C<< S 1 >>) if available, type with number
(suc as C<< RE 10126 >>) otherwise.

=item $result->line_no

Number of the line, undef if unknown. Seems to be set only for S-Bahn and
regional trains. Note that some regional and most long-distance trains do
not have this field set, even if they have a common line number.

Example: For the line C<< S 1 >>, line_no will return C<< 1 >>.

=item $result->messages

Get all qos and delay messages ever entered for this train. Returns a list of
[datetime, string] listrefs sorted by newest first. The datetime part is a
DateTime(3pm) object corresponding to the point in time when the message was
entered, the string is the message. Note that neither duplicates nor superseded
messages are filtered from this list.

=item $result->old_train_id

Numeric ID of the pre-transfer train. Seems to be unique for a year and
trackable across stations. Only defined if a transfer took place,
see also B<is_transfer>.

=item $result->old_train_no

Number of the pre-tarnsfer train, unique per day. E.g. C<< 2225 >> for
C<< IC 2225 >>. See also B<is_transfer>. Only defined if a transfer took
place, see also B<is_transfer>.

=item $result->origin

Alias for route_start.

=item $result->qos_messages

Get all current qos messages for this train. Returns a list of [datetime,
string] listrefs sorted by newest first. The datetime part is a DateTime(3pm)
object corresponding to the point in time when the message was entered, the
string is the message. Contains neither superseded messages nor duplicates (in
case of a duplicate, only the most recent message is present)

=item $result->platform

Arrival/departure platform as string, undef if unknown. Note that this is
not neccessarily a number, platform sections may be included (e.g.
C<< 3a/b >>).

=item $result->raw_id

Raw ID of the departure, e.g. C<< -4642102742373784975-1401031322-6 >>.
The first part appears to be this train's UUID (can be tracked across
multiple stations), the second the YYmmddHHMM departure timestamp at its
start station, and the third the count of this station in the train's schedule
(in this case, it's the sixth from thestart station).

About half of all departure IDs do not contain the leading minus (C<< - >>)
seen in this example. The reason for this is unknown.

This is a developer option. It may be removed without prior warning.

=item $result->realtime_xml

XML::LibXML::Node(3pm) object containing all realtime data. undef if none is
available.

This is a developer option. It may be removed without prior warning.

=item $result->replaced_by

Returns a list of references to Travel::Status::DE::IRIS::Result(3pm) objects
which replace the (usually cancelled) arrival/departure of this train.
Returns nothing (false / empty list) otherwise.

=item $result->replacement_for

Returns a list of references to Travel::Status::DE::IRIS::Result(3pm) objects
which this (usually unplanned) train is meant to replace.
Returns nothing (false / empty list) otherwise.

=item $result->route

List of all stations served by this train, according to its schedule. Does
not contain realtime data.

=item $result->route_end

Name of the last station served by this train.

=item $result->route_interesting

List of up to three "interesting" stations served by this train, subset of
route_post. Usually contains the next stop and one or two major stations after
that. Does not contain realtime data.

=item $result->route_pre

List of station names the train passed (or will have passed) before this stop.

=item $result->route_post

List of station names the train will pass after this stop.

=item $result->route_start

Name of the first station served by this train.

=item $result->sched_arrival

DateTime(3pm) object for the scheduled arrival date and time. undef if the
train starts here.

=item $result->sched_departure

DateTime(3pm) object for the scehduled departure date and time. undef if the
train ends here.

=item $result->sched_platform

Scheduled Arrival/departure platform as string, undef if unknown. Note that
this is not neccessarily a number, platform sections may be included (e.g.  C<<
3a/b >>).

=item $result->sched_route

List of all stations served by this train, according to its schedule. Does
not contain realtime data.

=item $result->sched_route_end

Name of the last station served by this train according to its schedule.

=item $result->sched_route_pre

List of station names the train is scheduled to pass before this stop.

=item $result->sched_route_post

List of station names the train is scheduled to pass after this stop.

=item $result->sched_route_start

Name of the first station served by this train according to its schedule.

=item $result->start

DateTime(3pm) object for the scheduled start of the train on its route
(i.e. the departure time at its first station).

=item $result->stop_no

Number of this stop on the train's route. 1 if it's the start station, 2
for the stop after that, and so on.

=item $result->time

Scheduled departure time if available, arrival time otherwise (e.g. if the
train ends here). String in HH:MM format. Does not contain realtime data.

=item $result->train

Alias for line.

=item $result->train_id

Numeric ID of this train, trackable across stations and days. For instance, the
S 31128 (S1) to Solingen, starting in Dortmund on 19:23, has the ID
2404170432985554630 on each station it passes and (usually) on every day of the
year.  Note that it may change during the yearly itinerary update in december.

=item $result->train_no

Number of this train, unique per day. E.g. C<< 2225 >> for C<< IC 2225 >>.

=item $result->type

Type of this train, e.g. C<< S >> for S-Bahn, C<< RE >> for Regional-Express,
C<< ICE >> for InterCity-Express.

=back

=head2 INTERNAL

=over

=item $result = Travel::Status::DE::IRIS::Result->new(I<%data>)

Returns a new Travel::Status::DE::IRIS::Result object.
You usually do not need to call this.

=back

=head1 MESSAGES

A dump of all messages entered for the result is available. Each message
consists of a timestamp (when it was entered), a type (d for delay reasons,
q for other train-related information) and a value (numeric ID).

At the time of this writing, the following messages are known:

=over

=item d  2 : "Polizeiliche Ermittlung"

=item d  3 : "Feuerwehreinsatz neben der Strecke"

=item d  5 : "E<Auml>rztliche Versorgung eines Fahrgastes"

=item d  6 : "BetE<auml>tigen der Notbremse"

Source: Correlation between IRIS and DB RIS (bahn.de).

=item d  7 : "Personen im Gleis"

=item d  8 : "Notarzteinsatz am Gleis"

=item d  9 : "Streikauswirkungen"

=item d 10 : "Ausgebrochene Tiere im Gleis"

=item d 11 : "Unwetter"

=item d 13 : "Pass- und Zollkontrolle"

Source: Correlation between IRIS and DB RIS (bahn.de).

=item d 15 : "BeeintrE<auml>chtigung durch Vandalismus"

=item d 16 : "EntschE<auml>rfung einer Fliegerbombe"

=item d 17 : "BeschE<auml>digung einer BrE<uuml>cke"

=item d 18 : "UmgestE<uuml>rzter Baum im Gleis"

=item d 19 : "Unfall an einem BahnE<uuml>bergang"

=item d 20 : "Tiere im Gleis"

=item d 21 : "Warten auf weitere Reisende"

=item d 22 : "Witterungsbedingte StE<ouml>rung"

=item d 23 : "Feuerwehreinsatz auf BahngelE<auml>nde"

=item d 24 : "VerspE<auml>tung aus dem Ausland"

=item d 25 : "Warten auf verspE<auml>tete Zugteile"

=item d 28 : "GegenstE<auml>nde im Gleis"

=item d 31 : "Bauarbeiten"

=item d 32 : "VerzE<ouml>gerung beim Ein-/Ausstieg"

=item d 33 : "OberleitungsstE<ouml>rung"

=item d 34 : "SignalstE<ouml>rung"

=item d 35 : "Streckensperrung"

=item d 36 : "Technische StE<ouml>rung am Zug"

=item d 37 : "Technische StE<ouml>rung am Wagen"

=item d 38 : "Technische StE<ouml>rung an der Strecke"

=item d 39 : "AnhE<auml>ngen von zusE<auml>tzlichen Wagen"

=item d 40 : "StellwerksstE<ouml>rung/-ausfall"

=item d 41 : "StE<ouml>rung an einem BahnE<uuml>bergang"

=item d 42 : "AuE<szlig>erplanmE<auml>E<szlig>ige GeschwindigkeitsbeschrE<auml>nkung"

=item d 43 : "VerspE<auml>tung eines vorausfahrenden Zuges"

=item d 44 : "Warten auf einen entgegenkommenden Zug"

=item d 45 : "E<Uuml>berholung durch anderen Zug"

=item d 46 : "Warten auf freie Einfahrt"

=item d 47 : "VerspE<auml>tete Bereitstellung"

=item d 48 : "VerspE<auml>tung aus vorheriger Fahrt"

=item d 55 : "Technische StE<ouml>rung an einem anderen Zug"

Source: Correlation between IRIS and DB RIS (bahn.de).

=item d 56 : "Warten auf FahrgE<auml>ste aus einem Bus"

Source: Correlation between IRIS and DB RIS (bahn.de).

=item d 57 : "ZusE<auml>tzlicher Halt"

Source: Correlation between IRIS and DB RIS (bahn.de).

=item d 58 : "Umleitung"

Source: Correlation between IRIS and DB RIS (bahn.de). Several entries, related
to "Notarzteinsatz am Gleis".

=item d 59 : "Schnee und Eis"

Source: Correlation between IRIS and DB RIS (bahn.de).

=item d 60 : "Reduzierte Geschwindigkeit wegen Sturm"

Source: Correlation between IRIS and DB RIS (bahn.de).

=item d 61 : "TE<uuml>rstE<ouml>rung"

Source: Correlation between IRIS and DB RIS (bahn.de).

=item d 62 : "Behobene technische StE<ouml>rung am Zug"

Source: Correlation between IRIS and DB RIS (bahn.de).

=item d 63 : "Technische Untersuchung am Zug"

=item d 64 : "WeichenstE<ouml>rung"

Source: correlation between IRIS and DB RIS (bahn.de).

=item d 65 : "Erdrutsch"

Source: correlation between IRIS and DB RIS (bahn.de).

=item q 70 : "Kein WLAN"

Source: correlation between IRIS and DB RIS (bahn.de).

=item q 71 : "WLAN in einzelnen Wagen nicht verfE<uuml>gbar"

=item q 73 : "Mehrzweckabteil vorne"

Source: correlation between IRIS and DB RIS (bahn.de).

=item q 74 : "Mehrzweckabteil hinten"

Source: correlation between IRIS and DB RIS (bahn.de).

=item q 75 : "1. Klasse vorne"

Source: correlation between IRIS and DB RIS (bahn.de).

=item q 76 : "1. Klasse hinten"

Source: correlation between IRIS and DB RIS (bahn.de).

=item q 77 : "Ohne 1. Klasse"

Source: correlation between IRIS and DB RIS (bahn.de).

=item q 79 : "Ohne Mehrzweckabteil"

Source: correlation between IRIS and DB RIS (bahn.de).

=item q 80 : "Abweichende Wagenreihung"

Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.

=item q 82 : "Mehrere Wagen fehlen"

Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.

=item q 83 : "Fehlender Zugteil"

Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.

=item q 84 : "Zug verkehrt richtig gereiht"

Obsoletes messages 80, 82, 83, 85.
Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.

=item q 85 : "Ein Wagen fehlt"

Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.

=item q 86 : "Keine Reservierungsanzeige"

Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.

=item q 87 : "Einzelne Wagen ohne Reservierungsanzeige"

Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.

=item q 88 : "Keine QualitE<auml>tsmE<auml>ngel"

Obsoletes messages 80, 82, 83, 85, 86, 87, 90, 91, 92, 93, 96, 97, 98.
Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.

=item q 89 : "Reservierungen sind wieder vorhanden"

Obsoletes messages 86, 87.
Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.

=item q 90 : "Kein Bordrestaurant/Bordbistro"

Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.

=item q 91 : "EingeschrE<auml>nkte Fahrradmitnahme"

Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.

Might also mean "Keine Fahrradmitnahme" (source: frubi).

=item q 92 : "Klimaanlage in einzelnen Wagen ausgefallen"

Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.

Might also mean "Rollstuhlgerechtes WC in einem Wagen ausgefallen"
(source: frubi).

=item q 93 : "Fehlende oder gestE<ouml>rte behindertengerechte Einrichtung"

Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.
Might also mean "Kein rollstuhlgerechtes WC" (source: frubi).

=item q 94 : "Ersatzbewirtschaftung"

Estimated from a comparison with bahn.de/ris messages. Needs to be verified.

=item q 95 : "Ohne behindertengerechtes WC"

Estimated from a comparison with bahn.de/iris messages.

=item q 96 : "Der Zug ist stark E<uuml>berbesetzt"

Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.

=item q 97 : "Der Zug ist E<uuml>berbesetzt"

Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.

=item q 98 : "Sonstige QualitE<auml>tsmE<auml>ngel"

Verified by L<https://iris.noncd.db.de/irisWebclient/Configuration>.
Might also mean "Kein rollstuhlgerechter Wagen" (source: frubi).

=item d 99 : "VerzE<ouml>gerungen im Betriebsablauf"

=back

=head1 DIAGNOSTICS

None.

=head1 DEPENDENCIES

=over

=item Class::Accessor(3pm)

=back

=head1 BUGS AND LIMITATIONS

Unknown.

=head1 SEE ALSO

Travel::Status::DE::IRIS(3pm).

=head1 AUTHOR

Copyright (C) 2013-2018 by Daniel Friesel E<lt>derf@finalrewind.orgE<gt>

=head1 LICENSE

This module is licensed under the same terms as Perl itself.