From a7b1f09861f7e13caaa09802f5858eeca4b8e6cd Mon Sep 17 00:00:00 2001
From: Birte Kristina Friesel <derf@finalrewind.org>
Date: Sun, 7 Jan 2024 11:43:45 +0100
Subject: add README

---
 README.md | 65 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 README.md

diff --git a/README.md b/README.md
new file mode 100644
index 0000000..7621b7c
--- /dev/null
+++ b/README.md
@@ -0,0 +1,65 @@
+# CO₂ Monitor
+
+This repository contains NodeMCU Lua source code for an [MH-Z19 based CO₂ monitor](https://finalrewind.org/projects/co2-monitor-mhz19-ssd1306/).
+It shows the current CO₂ concentration and MH-Z19 temperature on a 128×32 SSD1306 OLED and makes them available to Home Assistant via MQTT.
+It can also publish readings to InfluxDB.
+
+## Features
+
+* Display for CO₂ and temperature
+* Home Assistant integration via MQTT
+* Optional logging to InfluxDB
+* Powered via USB
+
+## Components
+
+* Processor: ESP8266
+* CO₂ sensor: MH-Z19
+* Display: 128×32 OLED via SSD1306 (128×64 also supported with some changes)
+
+## Configuration
+
+WiFi, Home Assistant, and InfluxDB configuration is read from `src/config.lua`.
+You will need the following entries.
+
+### WiFi
+
+Assuming ESSID "foo" and PSK "bar".
+WPA2 Enterprise is not supported.
+Leave out the `psk` for open WiFi.
+
+```lua
+station_cfg = {ssid = "foo", pwd = "bar"}
+```
+
+### MQTT
+
+The only configurable entity is the hostname of the MQTT broker. The ESP8266
+will register itself as `homeassistant/sensor/esp8266_XXXXXX` with the last six
+digits representing its WiFi MAC address.
+
+```lua
+mqtt_host = "mqtt.example.org"
+```
+
+### InfluxDB
+
+These settings are optional. Specify a URL and attributes in order to enable
+InfluxDB publishing. For instance, if measurements should be stored as
+`mh_z19,location=lounge` in the `sensors` database on
+`https://influxdb.example.org`, the configuration is as follows.
+
+```lua
+influx_url = 'https://influxdb.example.org/write?db=sensors'
+influx_attr = ',location=lounge'
+```
+
+You can also use the `esp8266_XXXXXX` device id here, like so:
+
+```lua
+influx_url = 'https://influxdb.example.org/write?db=sensors'
+influx_attr = ',location=' .. device_id
+```
+
+Optionally, you can set `influx_header` to an HTTP header that is passed as
+part of the POST request to InfluxDB.
-- 
cgit v1.2.3