From 6fb1699433c87ce1abe22bfc90855cc6fb96c378 Mon Sep 17 00:00:00 2001 From: Birte Kristina Friesel Date: Sun, 14 Jan 2024 08:23:39 +0100 Subject: README: nits; consistency with other NodeMCU drivers --- README.md | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/README.md b/README.md index f5c22c8..fc9b78f 100644 --- a/README.md +++ b/README.md @@ -1,8 +1,8 @@ -# ESP8266 Lua/NodeMCU module for MAX44009 illuminance sensor +# ESP8266 Lua/NodeMCU module for MAX44009 illuminance sensors This repository contains an ESP8266 NodeMCU Lua module (`max44009.lua`) as well as MQTT / HomeAssistant / InfluxDB integration example (`init.lua`) for -**MAX44009** illuminance sensors. +**MAX44009** illuminance sensors connected via I²C. ## Dependencies @@ -41,15 +41,16 @@ Copy **max44009.lua** to your NodeMCU board and set it up as follows. ```lua max44009 = require("max44009") -i2c.setup(0, sda_pin, scl_pin, i2c.SLOW) +i2c.setup(0, 1, 2, i2c.SLOW) -- can be called with up to 1 Hz function some_timer_callback() local lx = max44009.read() - if lx == nil then + if lx ~= nil then + -- lx : Illuminance as floating point value [lx] + else print("MAX44009 error") else - -- lx contains the illuminance. Note that it is a floating point value. end end ``` @@ -60,7 +61,7 @@ end To use it, you need to create a **config.lua** file with WiFI and MQTT settings: ```lua -station_cfg = {ssid = "foo", pwd = "bar"} +station_cfg = {ssid = "...", pwd = "..."} mqtt_host = "..." ``` @@ -72,5 +73,5 @@ influx_url = "..." influx_attr = "..." ``` -Readings will be stored as `max44009[influx_attr] illuminance_lx=...`. +Readings will be stored as `max44009[influx_attr] illuminance_lx=%f`. So, unless `influx_attr = ''`, it must start with a comma, e.g. `influx_attr = ',device=' .. device_id`. -- cgit v1.2.3