From e6cef3c547e8f73cbf2d3c7ba639cb7d9934c475 Mon Sep 17 00:00:00 2001 From: Daniel Friesel Date: Mon, 18 Jul 2022 11:25:27 +0200 Subject: Add Hercules RM46L8 Launchpad support (Cortex R4F) --- include/arch/rm46l8lp/halcogen/Device_RM46.h | 111 + include/arch/rm46l8lp/halcogen/Device_TMS570LS12.h | 111 + include/arch/rm46l8lp/halcogen/Device_header.h | 67 + include/arch/rm46l8lp/halcogen/Device_types.h | 116 + include/arch/rm46l8lp/halcogen/MemMap.h | 70 + include/arch/rm46l8lp/halcogen/adc.h | 311 +++ include/arch/rm46l8lp/halcogen/can.h | 729 ++++++ include/arch/rm46l8lp/halcogen/crc.h | 326 +++ include/arch/rm46l8lp/halcogen/dcc.h | 306 +++ include/arch/rm46l8lp/halcogen/ecap.h | 260 ++ include/arch/rm46l8lp/halcogen/emac.h | 404 ++++ include/arch/rm46l8lp/halcogen/eqep.h | 716 ++++++ include/arch/rm46l8lp/halcogen/errata_SSWF021_45.h | 49 + .../rm46l8lp/halcogen/errata_SSWF021_45_defs.h | 205 ++ include/arch/rm46l8lp/halcogen/esm.h | 956 ++++++++ include/arch/rm46l8lp/halcogen/etpwm.h | 744 ++++++ include/arch/rm46l8lp/halcogen/fee_interface.h | 193 ++ include/arch/rm46l8lp/halcogen/gio.h | 174 ++ include/arch/rm46l8lp/halcogen/hal_stdtypes.h | 196 ++ include/arch/rm46l8lp/halcogen/het.h | 671 ++++++ include/arch/rm46l8lp/halcogen/htu.h | 71 + include/arch/rm46l8lp/halcogen/hw_emac.h | 1489 ++++++++++++ include/arch/rm46l8lp/halcogen/hw_emac_ctrl.h | 91 + include/arch/rm46l8lp/halcogen/hw_mdio.h | 264 +++ include/arch/rm46l8lp/halcogen/hw_reg_access.h | 81 + include/arch/rm46l8lp/halcogen/hw_usb.h | 276 +++ include/arch/rm46l8lp/halcogen/i2c.h | 228 ++ include/arch/rm46l8lp/halcogen/lin.h | 333 +++ include/arch/rm46l8lp/halcogen/mdio.h | 92 + include/arch/rm46l8lp/halcogen/mibspi.h | 287 +++ include/arch/rm46l8lp/halcogen/phy_dp83640.h | 132 ++ include/arch/rm46l8lp/halcogen/pinmux.h | 575 +++++ include/arch/rm46l8lp/halcogen/pom.h | 242 ++ include/arch/rm46l8lp/halcogen/reg_adc.h | 261 ++ include/arch/rm46l8lp/halcogen/reg_can.h | 208 ++ include/arch/rm46l8lp/halcogen/reg_crc.h | 127 + include/arch/rm46l8lp/halcogen/reg_dcc.h | 103 + include/arch/rm46l8lp/halcogen/reg_dma.h | 185 ++ include/arch/rm46l8lp/halcogen/reg_ecap.h | 159 ++ include/arch/rm46l8lp/halcogen/reg_efc.h | 96 + include/arch/rm46l8lp/halcogen/reg_eqep.h | 151 ++ include/arch/rm46l8lp/halcogen/reg_esm.h | 106 + include/arch/rm46l8lp/halcogen/reg_etpwm.h | 225 ++ include/arch/rm46l8lp/halcogen/reg_flash.h | 134 ++ include/arch/rm46l8lp/halcogen/reg_gio.h | 134 ++ include/arch/rm46l8lp/halcogen/reg_het.h | 203 ++ include/arch/rm46l8lp/halcogen/reg_htu.h | 141 ++ include/arch/rm46l8lp/halcogen/reg_i2c.h | 147 ++ include/arch/rm46l8lp/halcogen/reg_lin.h | 129 + include/arch/rm46l8lp/halcogen/reg_mibspi.h | 257 ++ include/arch/rm46l8lp/halcogen/reg_pbist.h | 98 + include/arch/rm46l8lp/halcogen/reg_pcr.h | 113 + include/arch/rm46l8lp/halcogen/reg_pinmux.h | 180 ++ include/arch/rm46l8lp/halcogen/reg_pmm.h | 111 + include/arch/rm46l8lp/halcogen/reg_pom.h | 127 + include/arch/rm46l8lp/halcogen/reg_rti.h | 129 + include/arch/rm46l8lp/halcogen/reg_sci.h | 139 ++ include/arch/rm46l8lp/halcogen/reg_spi.h | 187 ++ include/arch/rm46l8lp/halcogen/reg_stc.h | 93 + include/arch/rm46l8lp/halcogen/reg_system.h | 191 ++ include/arch/rm46l8lp/halcogen/reg_tcram.h | 94 + include/arch/rm46l8lp/halcogen/reg_vim.h | 110 + include/arch/rm46l8lp/halcogen/rti.h | 326 +++ include/arch/rm46l8lp/halcogen/sci.h | 203 ++ include/arch/rm46l8lp/halcogen/spi.h | 222 ++ include/arch/rm46l8lp/halcogen/std_nhet.h | 2499 ++++++++++++++++++++ include/arch/rm46l8lp/halcogen/sys_common.h | 130 + include/arch/rm46l8lp/halcogen/sys_core.h | 358 +++ include/arch/rm46l8lp/halcogen/sys_dma.h | 367 +++ include/arch/rm46l8lp/halcogen/sys_mpu.h | 517 ++++ include/arch/rm46l8lp/halcogen/sys_pcr.h | 297 +++ include/arch/rm46l8lp/halcogen/sys_pmm.h | 182 ++ include/arch/rm46l8lp/halcogen/sys_pmu.h | 241 ++ include/arch/rm46l8lp/halcogen/sys_selftest.h | 471 ++++ include/arch/rm46l8lp/halcogen/sys_vim.h | 457 ++++ include/arch/rm46l8lp/halcogen/system.h | 510 ++++ include/arch/rm46l8lp/halcogen/ti_fee.h | 504 ++++ include/arch/rm46l8lp/halcogen/ti_fee_cfg.h | 55 + include/arch/rm46l8lp/halcogen/ti_fee_types.h | 203 ++ include/arch/rm46l8lp/halcogen/usb-ids.h | 71 + include/arch/rm46l8lp/halcogen/usb.h | 694 ++++++ .../arch/rm46l8lp/halcogen/usb_serial_structs.h | 74 + include/arch/rm46l8lp/halcogen/usbcdc.h | 742 ++++++ include/arch/rm46l8lp/halcogen/usbdcdc.h | 383 +++ include/arch/rm46l8lp/halcogen/usbdevice.h | 153 ++ include/arch/rm46l8lp/halcogen/usbdevicepriv.h | 90 + include/arch/rm46l8lp/halcogen/usblib.h | 1899 +++++++++++++++ 87 files changed, 26862 insertions(+) create mode 100644 include/arch/rm46l8lp/halcogen/Device_RM46.h create mode 100644 include/arch/rm46l8lp/halcogen/Device_TMS570LS12.h create mode 100644 include/arch/rm46l8lp/halcogen/Device_header.h create mode 100644 include/arch/rm46l8lp/halcogen/Device_types.h create mode 100644 include/arch/rm46l8lp/halcogen/MemMap.h create mode 100644 include/arch/rm46l8lp/halcogen/adc.h create mode 100644 include/arch/rm46l8lp/halcogen/can.h create mode 100644 include/arch/rm46l8lp/halcogen/crc.h create mode 100644 include/arch/rm46l8lp/halcogen/dcc.h create mode 100644 include/arch/rm46l8lp/halcogen/ecap.h create mode 100644 include/arch/rm46l8lp/halcogen/emac.h create mode 100644 include/arch/rm46l8lp/halcogen/eqep.h create mode 100644 include/arch/rm46l8lp/halcogen/errata_SSWF021_45.h create mode 100644 include/arch/rm46l8lp/halcogen/errata_SSWF021_45_defs.h create mode 100644 include/arch/rm46l8lp/halcogen/esm.h create mode 100644 include/arch/rm46l8lp/halcogen/etpwm.h create mode 100644 include/arch/rm46l8lp/halcogen/fee_interface.h create mode 100644 include/arch/rm46l8lp/halcogen/gio.h create mode 100644 include/arch/rm46l8lp/halcogen/hal_stdtypes.h create mode 100644 include/arch/rm46l8lp/halcogen/het.h create mode 100644 include/arch/rm46l8lp/halcogen/htu.h create mode 100644 include/arch/rm46l8lp/halcogen/hw_emac.h create mode 100644 include/arch/rm46l8lp/halcogen/hw_emac_ctrl.h create mode 100644 include/arch/rm46l8lp/halcogen/hw_mdio.h create mode 100644 include/arch/rm46l8lp/halcogen/hw_reg_access.h create mode 100644 include/arch/rm46l8lp/halcogen/hw_usb.h create mode 100644 include/arch/rm46l8lp/halcogen/i2c.h create mode 100644 include/arch/rm46l8lp/halcogen/lin.h create mode 100644 include/arch/rm46l8lp/halcogen/mdio.h create mode 100644 include/arch/rm46l8lp/halcogen/mibspi.h create mode 100644 include/arch/rm46l8lp/halcogen/phy_dp83640.h create mode 100644 include/arch/rm46l8lp/halcogen/pinmux.h create mode 100644 include/arch/rm46l8lp/halcogen/pom.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_adc.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_can.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_crc.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_dcc.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_dma.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_ecap.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_efc.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_eqep.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_esm.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_etpwm.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_flash.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_gio.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_het.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_htu.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_i2c.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_lin.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_mibspi.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_pbist.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_pcr.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_pinmux.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_pmm.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_pom.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_rti.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_sci.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_spi.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_stc.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_system.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_tcram.h create mode 100644 include/arch/rm46l8lp/halcogen/reg_vim.h create mode 100644 include/arch/rm46l8lp/halcogen/rti.h create mode 100644 include/arch/rm46l8lp/halcogen/sci.h create mode 100644 include/arch/rm46l8lp/halcogen/spi.h create mode 100644 include/arch/rm46l8lp/halcogen/std_nhet.h create mode 100644 include/arch/rm46l8lp/halcogen/sys_common.h create mode 100644 include/arch/rm46l8lp/halcogen/sys_core.h create mode 100644 include/arch/rm46l8lp/halcogen/sys_dma.h create mode 100644 include/arch/rm46l8lp/halcogen/sys_mpu.h create mode 100644 include/arch/rm46l8lp/halcogen/sys_pcr.h create mode 100644 include/arch/rm46l8lp/halcogen/sys_pmm.h create mode 100644 include/arch/rm46l8lp/halcogen/sys_pmu.h create mode 100644 include/arch/rm46l8lp/halcogen/sys_selftest.h create mode 100644 include/arch/rm46l8lp/halcogen/sys_vim.h create mode 100644 include/arch/rm46l8lp/halcogen/system.h create mode 100644 include/arch/rm46l8lp/halcogen/ti_fee.h create mode 100644 include/arch/rm46l8lp/halcogen/ti_fee_cfg.h create mode 100644 include/arch/rm46l8lp/halcogen/ti_fee_types.h create mode 100644 include/arch/rm46l8lp/halcogen/usb-ids.h create mode 100644 include/arch/rm46l8lp/halcogen/usb.h create mode 100644 include/arch/rm46l8lp/halcogen/usb_serial_structs.h create mode 100644 include/arch/rm46l8lp/halcogen/usbcdc.h create mode 100644 include/arch/rm46l8lp/halcogen/usbdcdc.h create mode 100644 include/arch/rm46l8lp/halcogen/usbdevice.h create mode 100644 include/arch/rm46l8lp/halcogen/usbdevicepriv.h create mode 100644 include/arch/rm46l8lp/halcogen/usblib.h (limited to 'include/arch/rm46l8lp/halcogen') diff --git a/include/arch/rm46l8lp/halcogen/Device_RM46.h b/include/arch/rm46l8lp/halcogen/Device_RM46.h new file mode 100644 index 0000000..991fcdf --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/Device_RM46.h @@ -0,0 +1,111 @@ +/********************************************************************************************************************** + * FILE DESCRIPTION + * ------------------------------------------------------------------------------------------------------------------- + * File: Device_RM46.c + * Project: Tms570_TIFEEDriver + * Module: TIFEEDriver + * Generator: None + * + * Description: This file defines the number of sectors. + *--------------------------------------------------------------------------------------------------------------------- + * Author: Vishwanath Reddy + *--------------------------------------------------------------------------------------------------------------------- + * Revision History + *--------------------------------------------------------------------------------------------------------------------- + * Version Date Author Change ID Description + *--------------------------------------------------------------------------------------------------------------------- + * 01.15.00 06Jun2014 Vishwanath Reddy History Added. + *********************************************************************************************************************/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + + /********************************************************************************************************************* + * INCLUDES + *********************************************************************************************************************/ + +#ifndef DEVICE_RM46_H +#define DEVICE_RM46_H + + +/** @def DEVICE_CONFIGURATION_VERSION +* @brief Device Configuration Version +* +* @note Indicates the current version of the device files +*/ +#define DEVICE_CONFIGURATION_VERSION 0U /* Indicates the current version of the device files */ + +/** @def DEVICE_NUMBER_OF_FLASH_BANKS +* @brief Number of Flash Banks +* +* @note Defines the number of Flash Banks on the device +*/ +#define DEVICE_NUMBER_OF_FLASH_BANKS 1U /* Defines the number of Flash Banks on the device */ + + +/** @def DEVICE_BANK_MAX_NUMBER_OF_SECTORS +* @brief Maximum number of Sectors +* +* @note Defines the maxium number of sectors in all banks +*/ +#define DEVICE_BANK_MAX_NUMBER_OF_SECTORS 4U /* Defines the maxium number of sectors in all banks */ + +/** @def DEVICE_BANK1_NUMBER_OF_SECTORS +* @brief Number of Sectors +* +* @note Defines the number of sectors in bank1 +*/ +#define DEVICE_BANK1_NUMBER_OF_SECTORS 4U /* Defines the number of sectors in bank1 */ + + +/** @def DEVICE_NUMBER_OF_READ_CYCLE_THRESHOLDS +* @brief Number of Sectors +* +* @note Defines the number of Read Cycle Thresholds +*/ +#define DEVICE_NUMBER_OF_READ_CYCLE_THRESHOLDS 4U /* Defines the number of Read Cycle Thresholds */ + + +/* Include Files */ +#ifndef _PLATFORM_TYPES_H_ +#define _PLATFORM_TYPES_H_ +#endif +#include "F021.h" +#include "hal_stdtypes.h" +#include "Device_types.h" + +#endif /* DEVICE_RM46_H */ + +/* End of File */ diff --git a/include/arch/rm46l8lp/halcogen/Device_TMS570LS12.h b/include/arch/rm46l8lp/halcogen/Device_TMS570LS12.h new file mode 100644 index 0000000..0fdd093 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/Device_TMS570LS12.h @@ -0,0 +1,111 @@ +/********************************************************************************************************************** + * FILE DESCRIPTION + * ------------------------------------------------------------------------------------------------------------------- + * File: Device_TMS570LS12.h + * Project: Tms570_TIFEEDriver + * Module: TIFEEDriver + * Generator: None + * + * Description: This file defines the number of sectors. + *--------------------------------------------------------------------------------------------------------------------- + * Author: Vishwanath Reddy + *--------------------------------------------------------------------------------------------------------------------- + * Revision History + *--------------------------------------------------------------------------------------------------------------------- + * Version Date Author Change ID Description + *--------------------------------------------------------------------------------------------------------------------- + * 01.15.00 06Jun2014 Vishwanath Reddy History Added. + *********************************************************************************************************************/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + + /********************************************************************************************************************* + * INCLUDES + *********************************************************************************************************************/ + +#ifndef DEVICE_TMS570LS12x_H +#define DEVICE_TMS570LS12x_H + + +/** @def DEVICE_CONFIGURATION_VERSION +* @brief Device Configuration Version +* +* @note Indicates the current version of the device files +*/ +#define DEVICE_CONFIGURATION_VERSION 0U /* Indicates the current version of the device files */ + +/** @def DEVICE_NUMBER_OF_FLASH_BANKS +* @brief Number of Flash Banks +* +* @note Defines the number of Flash Banks on the device +*/ +#define DEVICE_NUMBER_OF_FLASH_BANKS 1U /* Defines the number of Flash Banks on the device */ + + +/** @def DEVICE_BANK_MAX_NUMBER_OF_SECTORS +* @brief Maximum number of Sectors +* +* @note Defines the maxium number of sectors in all banks +*/ +#define DEVICE_BANK_MAX_NUMBER_OF_SECTORS 4U /* Defines the maxium number of sectors in all banks */ + +/** @def DEVICE_BANK1_NUMBER_OF_SECTORS +* @brief Number of Sectors +* +* @note Defines the number of sectors in bank1 +*/ +#define DEVICE_BANK1_NUMBER_OF_SECTORS 4U /* Defines the number of sectors in bank1 */ + + +/** @def DEVICE_NUMBER_OF_READ_CYCLE_THRESHOLDS +* @brief Number of Sectors +* +* @note Defines the number of Read Cycle Thresholds +*/ +#define DEVICE_NUMBER_OF_READ_CYCLE_THRESHOLDS 4U /* Defines the number of Read Cycle Thresholds */ + + +/* Include Files */ +#ifndef _PLATFORM_TYPES_H_ +#define _PLATFORM_TYPES_H_ +#endif +#include "F021.h" +#include "hal_stdtypes.h" +#include "Device_types.h" + +#endif /* DEVICE_TMS570LS12x_H */ + +/* End of File */ diff --git a/include/arch/rm46l8lp/halcogen/Device_header.h b/include/arch/rm46l8lp/halcogen/Device_header.h new file mode 100644 index 0000000..d7c50f1 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/Device_header.h @@ -0,0 +1,67 @@ +/********************************************************************************************************************** + * FILE DESCRIPTION + * ------------------------------------------------------------------------------------------------------------------- + * File: Device_header.h + * Project: Tms570_TIFEEDriver + * Module: TIFEEDriver + * Generator: None + * + * Description: This file includes the header file. + *--------------------------------------------------------------------------------------------------------------------- + * Author: Vishwanath Reddy + *--------------------------------------------------------------------------------------------------------------------- + * Revision History + *--------------------------------------------------------------------------------------------------------------------- + * Version Date Author Change ID Description + *--------------------------------------------------------------------------------------------------------------------- + * 01.15.00 06Jun2014 Vishwanath Reddy History Added. + *********************************************************************************************************************/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + + /********************************************************************************************************************* + * INCLUDES + *********************************************************************************************************************/ + +#ifndef TI_FEE_DEVICEHEADER_H +#define TI_FEE_DEVICEHEADER_H + +/* Uncomment the appropriate include file depending on the device you are using */ +#include "Device_RM46.h" + +/* End of file */ +#endif + diff --git a/include/arch/rm46l8lp/halcogen/Device_types.h b/include/arch/rm46l8lp/halcogen/Device_types.h new file mode 100644 index 0000000..4f945e2 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/Device_types.h @@ -0,0 +1,116 @@ +/********************************************************************************************************************** + * FILE DESCRIPTION + * ------------------------------------------------------------------------------------------------------------------- + * File: Device_types.h + * Project: Tms570_TIFEEDriver + * Module: TIFEEDriver + * Generator: None + * + * Description: This file defines the structures. + *--------------------------------------------------------------------------------------------------------------------- + * Author: Vishwanath Reddy + *--------------------------------------------------------------------------------------------------------------------- + * Revision History + *--------------------------------------------------------------------------------------------------------------------- + * Version Date Author Change ID Description + *--------------------------------------------------------------------------------------------------------------------- + * 01.15.00 06Jun2014 Vishwanath Reddy History Added. + *********************************************************************************************************************/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + + /********************************************************************************************************************* + * INCLUDES + *********************************************************************************************************************/ + + +#ifndef DEVICE_TYPES_H +#define DEVICE_TYPES_H + +#include "hal_stdtypes.h" + +/* Enum to describe the type of error handling on the device */ +typedef enum +{ + Device_ErrorHandlingNone, /* Device has no error handling */ + Device_ErrorHandlingParity, /* Device has parity error handling */ + Device_ErrorHandlingEcc /* Device has ECC error handling */ +} Device_FlashErrorCorrectionProcessType; + +/* Enum to describe the ARM core on the device*/ +typedef enum +{ + Device_CoreNone, /* To indicate that the device has a single core */ + Device_Arm7, /* To indicate that the device has a ARM7 core */ + Device_CortexR4, /* To indicate that the device has a CortexR4 core */ + Device_CortexM3 /* To indicate that the device has a CortexM3 core */ +}Device_ArmCoreType; + +/* Structure defines an individual sector within a bank */ +typedef struct +{ + Fapi_FlashSectorType Device_Sector; /* Sector number */ + uint32 Device_SectorStartAddress; /* Starting address of the sector */ + uint32 Device_SectorLength; /* Length of the sector */ + uint32 Device_MaxWriteCycles; /* Number of cycles the sector is rated for */ + uint32 Device_EccAddress; + uint32 Device_EccLength; +} Device_SectorType; + +/* Structure defines an individual bank */ +typedef struct +{ + Fapi_FmcRegistersType * Device_ControlRegister; + Fapi_FlashBankType Device_Core; /* Core number for this bank */ + Device_SectorType Device_SectorInfo[DEVICE_BANK_MAX_NUMBER_OF_SECTORS]; /* Array of the Sectors within a bank */ +} Device_BankType; + +/* Structure defines the Flash structure of the device */ +typedef struct +{ + uint8 Device_DeviceName[12]; /* Device name */ + uint32 Device_EngineeringId; /* Device Engineering ID */ + Device_FlashErrorCorrectionProcessType Device_FlashErrorHandlingProcessInfo; /* Indicates which type of bit Error handling is on the device */ + Device_ArmCoreType Device_MasterCore; /* Indicates the Master core type on the device */ + boolean Device_SupportsInterrupts; /* Indicates if the device supports Flash interrupts for processing Flash */ + uint32 Device_NominalWriteTime; /* Nominal time for one write command operation in uS */ + uint32 Device_MaximumWriteTime; /* Maximum time for one write command operation in uS */ + Device_BankType Device_BankInfo[DEVICE_NUMBER_OF_FLASH_BANKS]; /* Array of Banks on the device */ +} Device_FlashType; + +#endif /* DEVICE_TYPES_H */ + +/* End of File */ diff --git a/include/arch/rm46l8lp/halcogen/MemMap.h b/include/arch/rm46l8lp/halcogen/MemMap.h new file mode 100644 index 0000000..5abae66 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/MemMap.h @@ -0,0 +1,70 @@ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + +#ifndef __MEM_MAP_H__ +#define __MEM_MAP_H__ +/*FEE*/ +#ifdef FEE_START_SEC_VAR_INIT_UNSPECIFIED +#pragma SET_DATA_SECTION("FEE_DATA_SECTION") +#undef FEE_START_SEC_VAR_INIT_UNSPECIFIED +#endif + +#ifdef FEE_STOP_SEC_VAR_INIT_UNSPECIFIED +#pragma SET_DATA_SECTION() +#undef FEE_STOP_SEC_VAR_INIT_UNSPECIFIED +#endif + +#ifdef FEE_START_SEC_CONST_UNSPECIFIED +#pragma SET_DATA_SECTION("FEE_CONST_SECTION") +#undef FEE_START_SEC_CONST_UNSPECIFIED +#endif + +#ifdef FEE_STOP_SEC_CONST_UNSPECIFIED +#pragma SET_DATA_SECTION() +#undef FEE_STOP_SEC_CONST_UNSPECIFIED +#endif + +#ifdef FEE_START_SEC_CODE +#pragma SET_CODE_SECTION("FEE_TEXT_SECTION") +#undef FEE_START_SEC_CODE +#endif + +#ifdef FEE_STOP_SEC_CODE +#pragma SET_CODE_SECTION() +#undef FEE_STOP_SEC_CODE +#endif + + +#endif /* __MEM_MAP_H__ */ diff --git a/include/arch/rm46l8lp/halcogen/adc.h b/include/arch/rm46l8lp/halcogen/adc.h new file mode 100644 index 0000000..53979d4 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/adc.h @@ -0,0 +1,311 @@ +/** @file adc.h +* @brief ADC Driver Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the ADC driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __ADC_H__ +#define __ADC_H__ + +#include "reg_adc.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* ADC General Definitions */ + +/** @def adcGROUP0 +* @brief Alias name for ADC event group +* +* @note This value should be used for API argument @a group +*/ +#define adcGROUP0 0U + +/** @def adcGROUP1 +* @brief Alias name for ADC group 1 +* +* @note This value should be used for API argument @a group +*/ +#define adcGROUP1 1U + +/** @def adcGROUP2 +* @brief Alias name for ADC group 2 +* +* @note This value should be used for API argument @a group +*/ +#define adcGROUP2 2U + +/** @def ADC_12_BIT_MODE +* @brief Alias name for ADC 12-bit mode of operation +*/ +#define ADC_12_BIT_MODE 0x80000000U + +/** @enum adcResolution +* @brief Alias names for data resolution +* This enumeration is used to provide alias names for the data resolution: +* - 12 bit resolution +* - 10 bit resolution +* - 8 bit resolution +*/ +enum adcResolution +{ + ADC_12_BIT = 0x00000000U, /**< Alias for 12 bit data resolution */ + ADC_10_BIT = 0x00000100U, /**< Alias for 10 bit data resolution */ + ADC_8_BIT = 0x00000200U /**< Alias for 8 bit data resolution */ +}; + +/** @enum adcFiFoStatus +* @brief Alias names for FiFo status +* This enumeration is used to provide alias names for the current FiFo states: +* - FiFo is not full +* - FiFo is full +* - FiFo overflow occurred +*/ + +enum adcFiFoStatus +{ + ADC_FIFO_IS_NOT_FULL = 0U, /**< Alias for FiFo is not full */ + ADC_FIFO_IS_FULL = 1U, /**< Alias for FiFo is full */ + ADC_FIFO_OVERFLOW = 3U /**< Alias for FiFo overflow occurred */ +}; + +/** @enum adcConversionStatus +* @brief Alias names for conversion status +* This enumeration is used to provide alias names for the current conversion states: +* - Conversion is not finished +* - Conversion is finished +*/ + +enum adcConversionStatus +{ + ADC_CONVERSION_IS_NOT_FINISHED = 0U, /**< Alias for current conversion is not finished */ + ADC_CONVERSION_IS_FINISHED = 8U /**< Alias for current conversion is finished */ +}; + +/** @enum adc1HwTriggerSource +* @brief Alias names for hardware trigger source +* This enumeration is used to provide alias names for the hardware trigger sources: +*/ + +enum adc1HwTriggerSource +{ + ADC1_EVENT = 0U, /**< Alias for event pin */ + ADC1_HET1_8 = 1U, /**< Alias for HET1 pin 8 */ + ADC1_HET1_10 = 2U, /**< Alias for HET1 pin 10 */ + ADC1_RTI_COMP0 = 3U, /**< Alias for RTI compare 0 match */ + ADC1_HET1_12 = 4U, /**< Alias for HET1 pin 12 */ + ADC1_HET1_14 = 5U, /**< Alias for HET1 pin 14 */ + ADC1_GIOB0 = 6U, /**< Alias for GIO port b pin 0 */ + ADC1_GIOB1 = 7U, /**< Alias for GIO port b pin 1 */ + + ADC1_HET2_5 = 1U, /**< Alias for HET2 pin 5 */ + ADC1_HET1_27 = 2U, /**< Alias for HET1 pin 27 */ + ADC1_HET1_17 = 4U, /**< Alias for HET1 pin 17 */ + ADC1_HET1_19 = 5U, /**< Alias for HET1 pin 19 */ + ADC1_HET1_11 = 6U, /**< Alias for HET1 pin 11 */ + ADC1_HET2_13 = 7U, /**< Alias for HET2 pin 13 */ + + ADC1_EPWM_B = 1U, /**< Alias for B Signal EPWM */ + ADC1_EPWM_A1 = 3U, /**< Alias for A1 Signal EPWM */ + ADC1_HET2_1 = 5U, /**< Alias for HET2 pin 1 */ + ADC1_EPWM_A2 = 6U, /**< Alias for A2 Signal EPWM */ + ADC1_EPWM_AB = 7U /**< Alias for AB Signal EPWM */ + +}; + +/** @enum adc2HwTriggerSource +* @brief Alias names for hardware trigger source +* This enumeration is used to provide alias names for the hardware trigger sources: +*/ + +enum adc2HwTriggerSource +{ + ADC2_EVENT = 0U, /**< Alias for event pin */ + ADC2_HET1_8 = 1U, /**< Alias for HET1 pin 8 */ + ADC2_HET1_10 = 2U, /**< Alias for HET1 pin 10 */ + ADC2_RTI_COMP0 = 3U, /**< Alias for RTI compare 0 match */ + ADC2_HET1_12 = 4U, /**< Alias for HET1 pin 12 */ + ADC2_HET1_14 = 5U, /**< Alias for HET1 pin 14 */ + ADC2_GIOB0 = 6U, /**< Alias for GIO port b pin 0 */ + ADC2_GIOB1 = 7U, /**< Alias for GIO port b pin 1 */ + ADC2_HET2_5 = 1U, /**< Alias for HET2 pin 5 */ + ADC2_HET1_27 = 2U, /**< Alias for HET1 pin 27 */ + ADC2_HET1_17 = 4U, /**< Alias for HET1 pin 17 */ + ADC2_HET1_19 = 5U, /**< Alias for HET1 pin 19 */ + ADC2_HET1_11 = 6U, /**< Alias for HET1 pin 11 */ + ADC2_HET2_13 = 7U, /**< Alias for HET2 pin 13 */ + + ADC2_EPWM_B = 1U, /**< Alias for B Signal EPWM */ + ADC2_EPWM_A1 = 3U, /**< Alias for A1 Signal EPWM */ + ADC2_HET2_1 = 5U, /**< Alias for HET2 pin 1 */ + ADC2_EPWM_A2 = 6U, /**< Alias for A2 Signal EPWM */ + ADC2_EPWM_AB = 7U /**< Alias for AB Signal EPWM */ + +}; + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/** @struct adcData +* @brief ADC Conversion data structure +* +* This type is used to pass adc conversion data. +*/ +/** @typedef adcData_t +* @brief ADC Data Type Definition +*/ +typedef struct adcData +{ + uint32 id; /**< Channel/Pin Id */ + uint16 value; /**< Conversion data value */ +} adcData_t; + + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +typedef struct adc_config_reg +{ + uint32 CONFIG_OPMODECR; + uint32 CONFIG_CLOCKCR; + uint32 CONFIG_GxMODECR[3U]; + uint32 CONFIG_G0SRC; + uint32 CONFIG_G1SRC; + uint32 CONFIG_G2SRC; + uint32 CONFIG_BNDCR; + uint32 CONFIG_BNDEND; + uint32 CONFIG_G0SAMP; + uint32 CONFIG_G1SAMP; + uint32 CONFIG_G2SAMP; + uint32 CONFIG_G0SAMPDISEN; + uint32 CONFIG_G1SAMPDISEN; + uint32 CONFIG_G2SAMPDISEN; + uint32 CONFIG_PARCR; +}adc_config_reg_t; + +#define ADC1_OPMODECR_CONFIGVALUE 0x81140001U +#define ADC1_CLOCKCR_CONFIGVALUE (7U) + +#define ADC1_G0MODECR_CONFIGVALUE ((uint32)ADC_12_BIT | (uint32)0x00000000U | (uint32)0x00000000U) +#define ADC1_G1MODECR_CONFIGVALUE ((uint32)ADC_12_BIT | (uint32)0x00000000U | (uint32)0x00000000U | (uint32)0x00000000U) +#define ADC1_G2MODECR_CONFIGVALUE ((uint32)ADC_12_BIT | (uint32)0x00000000U | (uint32)0x00000000U | (uint32)0x00000000U) + +#define ADC1_G0SRC_CONFIGVALUE ((uint32)0x00000000U | (uint32)ADC1_EVENT) +#define ADC1_G1SRC_CONFIGVALUE ((uint32)0x00000000U | (uint32)ADC1_EVENT) +#define ADC1_G2SRC_CONFIGVALUE ((uint32)0x00000000U | (uint32)ADC1_EVENT) + +#define ADC1_BNDCR_CONFIGVALUE ((uint32)((uint32)8U << 16U)|(8U + 8U)) +#define ADC1_BNDEND_CONFIGVALUE (2U) + +#define ADC1_G0SAMP_CONFIGVALUE (1U) +#define ADC1_G1SAMP_CONFIGVALUE (0U) +#define ADC1_G2SAMP_CONFIGVALUE (1U) + +#define ADC1_G0SAMPDISEN_CONFIGVALUE ((uint32)((uint32)0U << 8U) | 0x00000000U) +#define ADC1_G1SAMPDISEN_CONFIGVALUE ((uint32)((uint32)0U << 8U) | 0x00000000U) +#define ADC1_G2SAMPDISEN_CONFIGVALUE ((uint32)((uint32)0U << 8U) | 0x00000000U) + +#define ADC1_PARCR_CONFIGVALUE (0x00000005U) + + +/** + * @defgroup ADC ADC + * @brief Analog To Digital Converter Module. + * + * The microcontroller includes two 12-bit ADC modules with selectable 10-bit or 12-bit resolution + * + * Related Files + * - reg_adc.h + * - adc.h + * - adc.c + * @addtogroup ADC + * @{ + */ + +/* ADC Interface Functions */ + +void adcInit(void); +void adcStartConversion(adcBASE_t *adc, uint32 group); +void adcStopConversion(adcBASE_t *adc, uint32 group); +void adcResetFiFo(adcBASE_t *adc, uint32 group); +uint32 adcGetData(adcBASE_t *adc, uint32 group, adcData_t *data); +uint32 adcIsFifoFull(adcBASE_t *adc, uint32 group); +uint32 adcIsConversionComplete(adcBASE_t *adc, uint32 group); +void adcEnableNotification(adcBASE_t *adc, uint32 group); +void adcDisableNotification(adcBASE_t *adc, uint32 group); +void adcCalibration(adcBASE_t *adc); +uint32 adcMidPointCalibration(adcBASE_t *adc); +void adcSetEVTPin(adcBASE_t *adc, uint32 value); +uint32 adcGetEVTPin(adcBASE_t *adc); + +void adc1GetConfigValue(adc_config_reg_t *config_reg, config_value_type_t type); +void adc2GetConfigValue(adc_config_reg_t *config_reg, config_value_type_t type); + +/** @fn void adcNotification(adcBASE_t *adc, uint32 group) +* @brief Group notification +* @param[in] adc Pointer to ADC node: +* - adcREG1: ADC1 module pointer +* - adcREG2: ADC2 module pointer +* @param[in] group number of ADC node: +* - adcGROUP0: ADC event group +* - adcGROUP1: ADC group 1 +* - adcGROUP2: ADC group 2 +* +* @note This function has to be provide by the user. +*/ +void adcNotification(adcBASE_t *adc, uint32 group); + +/* USER CODE BEGIN (3) */ +/* USER CODE END */ + +/**@}*/ +#ifdef __cplusplus +} +#endif +#endif diff --git a/include/arch/rm46l8lp/halcogen/can.h b/include/arch/rm46l8lp/halcogen/can.h new file mode 100644 index 0000000..54f3ca4 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/can.h @@ -0,0 +1,729 @@ +/** @file can.h +* @brief CAN Driver Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the CAN driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __CAN_H__ +#define __CAN_H__ + +#include "reg_can.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* CAN General Definitions */ + +/** @def canLEVEL_ACTIVE +* @brief Alias name for CAN error operation level active (Error counter 0-31) +*/ +#define canLEVEL_ACTIVE 0x00U + +/** @def canLEVEL_PASSIVE +* @brief Alias name for CAN error operation level passive (Error counter 32-63) +*/ +#define canLEVEL_PASSIVE 0x20U + +/** @def canLEVEL_WARNING +* @brief Alias name for CAN error operation level warning (Error counter 64-127) +*/ +#define canLEVEL_WARNING 0x40U + +/** @def canLEVEL_BUS_OFF +* @brief Alias name for CAN error operation level bus off (Error counter 128-255) +*/ +#define canLEVEL_BUS_OFF 0x80U + +/** @def canLEVEL_PARITY_ERR +* @brief Alias name for CAN Parity error (Error counter 256-511) +*/ +#define canLEVEL_PARITY_ERR 0x100U + +/** @def canLEVEL_TxOK +* @brief Alias name for CAN Sucessful Transmission +*/ +#define canLEVEL_TxOK 0x08U + +/** @def canLEVEL_RxOK +* @brief Alias name for CAN Sucessful Reception +*/ +#define canLEVEL_RxOK 0x10U + +/** @def canLEVEL_WakeUpPnd +* @brief Alias name for CAN Initiated a WakeUp to system +*/ +#define canLEVEL_WakeUpPnd 0x200U + +/** @def canLEVEL_PDA +* @brief Alias name for CAN entered low power mode successfully. +*/ +#define canLEVEL_PDA 0x400U + +/** @def canERROR_NO +* @brief Alias name for no CAN error occurred +*/ +#define canERROR_OK 0U + +/** @def canERROR_STUFF +* @brief Alias name for CAN stuff error an RX message +*/ +#define canERROR_STUFF 1U + +/** @def canERROR_FORMAT +* @brief Alias name for CAN form/format error an RX message +*/ +#define canERROR_FORMAT 2U + +/** @def canERROR_ACKNOWLEDGE +* @brief Alias name for CAN TX message wasn't acknowledged +*/ +#define canERROR_ACKNOWLEDGE 3U + +/** @def canERROR_BIT1 +* @brief Alias name for CAN TX message sending recessive level but monitoring dominant +*/ +#define canERROR_BIT1 4U + +/** @def canERROR_BIT0 +* @brief Alias name for CAN TX message sending dominant level but monitoring recessive +*/ +#define canERROR_BIT0 5U + +/** @def canERROR_CRC +* @brief Alias name for CAN RX message received wrong CRC +*/ +#define canERROR_CRC 6U + +/** @def canERROR_NO +* @brief Alias name for CAN no message has send or received since last call of CANGetLastError +*/ +#define canERROR_NO 7U + +/** @def canMESSAGE_BOX1 +* @brief Alias name for CAN message box 1 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX1 1U + +/** @def canMESSAGE_BOX2 +* @brief Alias name for CAN message box 2 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX2 2U + +/** @def canMESSAGE_BOX3 +* @brief Alias name for CAN message box 3 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX3 3U + +/** @def canMESSAGE_BOX4 +* @brief Alias name for CAN message box 4 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX4 4U + +/** @def canMESSAGE_BOX5 +* @brief Alias name for CAN message box 5 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX5 5U + +/** @def canMESSAGE_BOX6 +* @brief Alias name for CAN message box 6 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX6 6U + +/** @def canMESSAGE_BOX7 +* @brief Alias name for CAN message box 7 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX7 7U + +/** @def canMESSAGE_BOX8 +* @brief Alias name for CAN message box 8 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX8 8U + +/** @def canMESSAGE_BOX9 +* @brief Alias name for CAN message box 9 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX9 9U + +/** @def canMESSAGE_BOX10 +* @brief Alias name for CAN message box 10 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX10 10U + +/** @def canMESSAGE_BOX11 +* @brief Alias name for CAN message box 11 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX11 11U + +/** @def canMESSAGE_BOX12 +* @brief Alias name for CAN message box 12 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX12 12U + +/** @def canMESSAGE_BOX13 +* @brief Alias name for CAN message box 13 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX13 13U + +/** @def canMESSAGE_BOX14 +* @brief Alias name for CAN message box 14 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX14 14U + +/** @def canMESSAGE_BOX15 +* @brief Alias name for CAN message box 15 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX15 15U + +/** @def canMESSAGE_BOX16 +* @brief Alias name for CAN message box 16 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX16 16U + +/** @def canMESSAGE_BOX17 +* @brief Alias name for CAN message box 17 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX17 17U + +/** @def canMESSAGE_BOX18 +* @brief Alias name for CAN message box 18 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX18 18U + +/** @def canMESSAGE_BOX19 +* @brief Alias name for CAN message box 19 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX19 19U + +/** @def canMESSAGE_BOX20 +* @brief Alias name for CAN message box 20 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX20 20U + +/** @def canMESSAGE_BOX21 +* @brief Alias name for CAN message box 21 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX21 21U + +/** @def canMESSAGE_BOX22 +* @brief Alias name for CAN message box 22 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX22 22U + +/** @def canMESSAGE_BOX23 +* @brief Alias name for CAN message box 23 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX23 23U + +/** @def canMESSAGE_BOX24 +* @brief Alias name for CAN message box 24 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX24 24U + +/** @def canMESSAGE_BOX25 +* @brief Alias name for CAN message box 25 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX25 25U + +/** @def canMESSAGE_BOX26 +* @brief Alias name for CAN message box 26 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX26 26U + +/** @def canMESSAGE_BOX27 +* @brief Alias name for CAN message box 27 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX27 27U + +/** @def canMESSAGE_BOX28 +* @brief Alias name for CAN message box 28 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX28 28U + +/** @def canMESSAGE_BOX29 +* @brief Alias name for CAN message box 29 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX29 29U + +/** @def canMESSAGE_BOX30 +* @brief Alias name for CAN message box 30 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX30 30U + +/** @def canMESSAGE_BOX31 +* @brief Alias name for CAN message box 31 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX31 31U + +/** @def canMESSAGE_BOX32 +* @brief Alias name for CAN message box 32 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX32 32U + +/** @def canMESSAGE_BOX33 +* @brief Alias name for CAN message box 33 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX33 33U + +/** @def canMESSAGE_BOX34 +* @brief Alias name for CAN message box 34 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX34 34U + +/** @def canMESSAGE_BOX35 +* @brief Alias name for CAN message box 35 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX35 35U + +/** @def canMESSAGE_BOX36 +* @brief Alias name for CAN message box 36 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX36 36U + +/** @def canMESSAGE_BOX37 +* @brief Alias name for CAN message box 37 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX37 37U + +/** @def canMESSAGE_BOX38 +* @brief Alias name for CAN message box 38 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX38 38U + +/** @def canMESSAGE_BOX39 +* @brief Alias name for CAN message box 39 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX39 39U + +/** @def canMESSAGE_BOX40 +* @brief Alias name for CAN message box 40 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX40 40U + +/** @def canMESSAGE_BOX41 +* @brief Alias name for CAN message box 41 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX41 41U + +/** @def canMESSAGE_BOX42 +* @brief Alias name for CAN message box 42 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX42 42U + +/** @def canMESSAGE_BOX43 +* @brief Alias name for CAN message box 43 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX43 43U + +/** @def canMESSAGE_BOX44 +* @brief Alias name for CAN message box 44 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX44 44U + +/** @def canMESSAGE_BOX45 +* @brief Alias name for CAN message box 45 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX45 45U + +/** @def canMESSAGE_BOX46 +* @brief Alias name for CAN message box 46 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX46 46U + +/** @def canMESSAGE_BOX47 +* @brief Alias name for CAN message box 47 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX47 47U + +/** @def canMESSAGE_BOX48 +* @brief Alias name for CAN message box 48 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX48 48U + +/** @def canMESSAGE_BOX49 +* @brief Alias name for CAN message box 49 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX49 49U + +/** @def canMESSAGE_BOX50 +* @brief Alias name for CAN message box 50 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX50 50U + +/** @def canMESSAGE_BOX51 +* @brief Alias name for CAN message box 51 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX51 51U + +/** @def canMESSAGE_BOX52 +* @brief Alias name for CAN message box 52 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX52 52U + +/** @def canMESSAGE_BOX53 +* @brief Alias name for CAN message box 53 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX53 53U + +/** @def canMESSAGE_BOX54 +* @brief Alias name for CAN message box 54 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX54 54U + +/** @def canMESSAGE_BOX55 +* @brief Alias name for CAN message box 55 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX55 55U + +/** @def canMESSAGE_BOX56 +* @brief Alias name for CAN message box 56 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX56 56U + +/** @def canMESSAGE_BOX57 +* @brief Alias name for CAN message box 57 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX57 57U + +/** @def canMESSAGE_BOX58 +* @brief Alias name for CAN message box 58 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX58 58U + +/** @def canMESSAGE_BOX59 +* @brief Alias name for CAN message box 59 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX59 59U + +/** @def canMESSAGE_BOX60 +* @brief Alias name for CAN message box 60 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX60 60U + +/** @def canMESSAGE_BOX61 +* @brief Alias name for CAN message box 61 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX61 61U + +/** @def canMESSAGE_BOX62 +* @brief Alias name for CAN message box 62 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX62 62U + +/** @def canMESSAGE_BOX63 +* @brief Alias name for CAN message box 63 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX63 63U + +/** @def canMESSAGE_BOX64 +* @brief Alias name for CAN message box 64 +* +* @note This value should be used for API argument @a messageBox +*/ +#define canMESSAGE_BOX64 64U + + +/** @enum canloopBackType +* @brief canLoopback type definition +*/ +/** @typedef canloopBackType_t +* @brief canLoopback type Type Definition +* +* This type is used to select the can module Loopback type Digital or Analog loopback. +*/ +typedef enum canloopBackType +{ + Internal_Lbk = 0x00000010U, + External_Lbk = 0x00000100U, + Internal_Silent_Lbk = 0x00000018U +}canloopBackType_t; + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/* Configuration registers */ +typedef struct can_config_reg +{ + uint32 CONFIG_CTL; + uint32 CONFIG_ES; + uint32 CONFIG_BTR; + uint32 CONFIG_TEST; + uint32 CONFIG_ABOTR; + uint32 CONFIG_INTMUX0; + uint32 CONFIG_INTMUX1; + uint32 CONFIG_INTMUX2; + uint32 CONFIG_INTMUX3; + uint32 CONFIG_TIOC; + uint32 CONFIG_RIOC; +} can_config_reg_t; + + + +/** + * @defgroup CAN CAN + * @brief Controller Area Network Module. + * + * The Controller Area Network is a high-integrity, serial, multi-master communication protocol for distributed + * real-time applications. This CAN module is implemented according to ISO 11898-1 and is suitable for + * industrial, automotive and general embedded communications + * + * Related Files + * - reg_can.h + * - can.h + * - can.c + * @addtogroup CAN + * @{ + */ + +/* CAN Interface Functions */ + +void canInit(void); +uint32 canTransmit(canBASE_t *node, uint32 messageBox, const uint8 * data); +uint32 canGetData(canBASE_t *node, uint32 messageBox, uint8 * const data); +uint32 canSendRemoteFrame(canBASE_t *node, uint32 messageBox); +uint32 canFillMessageObjectData(canBASE_t *node, uint32 messageBox, const uint8 * data); +uint32 canIsTxMessagePending(canBASE_t *node, uint32 messageBox); +uint32 canIsRxMessageArrived(canBASE_t *node, uint32 messageBox); +uint32 canIsMessageBoxValid(canBASE_t *node, uint32 messageBox); +uint32 canGetLastError(canBASE_t *node); +uint32 canGetErrorLevel(canBASE_t *node); +void canEnableErrorNotification(canBASE_t *node); +void canDisableErrorNotification(canBASE_t *node); +void canEnableStatusChangeNotification(canBASE_t *node); +void canDisableStatusChangeNotification(canBASE_t *node); +void canEnableloopback(canBASE_t *node, canloopBackType_t Loopbacktype); +void canDisableloopback(canBASE_t *node); +void canIoSetDirection(canBASE_t *node,uint32 TxDir,uint32 RxDir); +void canIoSetPort(canBASE_t *node, uint32 TxValue, uint32 RxValue); +uint32 canIoTxGetBit(canBASE_t *node); +uint32 canIoRxGetBit(canBASE_t *node); +uint32 canGetID(canBASE_t *node, uint32 messageBox); +void canUpdateID(canBASE_t *node, uint32 messageBox, uint32 msgBoxArbitVal); + +/** @fn void canErrorNotification(canBASE_t *node, uint32 notification) +* @brief Error notification +* @param[in] node Pointer to CAN node: +* - canREG1: CAN1 node pointer +* - canREG2: CAN2 node pointer +* - canREG3: CAN3 node pointer +* @param[in] notification Error notification code: +* - canLEVEL_PASSIVE (0x20) : When RX- or TX error counter are between 32 and 63 +* - canLEVEL_WARNING (0x40) : When RX- or TX error counter are between 64 and 127 +* - canLEVEL_BUS_OFF (0x80) : When RX- or TX error counter are between 128 and 255 +* - canLEVEL_PARITY_ERR (0x100): When RX- or TX error counter are above 256 +* +* @note This function has to be provide by the user. +*/ +void canErrorNotification(canBASE_t *node, uint32 notification); + +/** @fn void canStatusChangeNotification(canBASE_t *node, uint32 notification) +* @brief Status Change notification +* @param[in] node Pointer to CAN node: +* - canREG1: CAN1 node pointer +* - canREG2: CAN2 node pointer +* - canREG3: CAN3 node pointer +* @param[in] notification Status change notification code: +* - canLEVEL_TxOK (0x08) : When successful transmission +* - canLEVEL_RxOK (0x10) : When successful reception +* - canLEVEL_WakeUpPnd (0x200): When successful WakeUp to system initiated +* - canLEVEL_PDA (0x400): When successful low power mode entrance +* +* @note This function has to be provide by the user. +*/ +void canStatusChangeNotification(canBASE_t *node, uint32 notification); + +/** @fn void canMessageNotification(canBASE_t *node, uint32 messageBox) +* @brief Message notification +* @param[in] node Pointer to CAN node: +* - canREG1: CAN1 node pointer +* - canREG2: CAN2 node pointer +* - canREG3: CAN3 node pointer +* @param[in] messageBox Message box number of CAN node: +* - canMESSAGE_BOX1: CAN message box 1 +* - canMESSAGE_BOXn: CAN message box n [n: 1-64] +* - canMESSAGE_BOX64: CAN message box 64 +* +* @note This function has to be provide by the user. +*/ +void canMessageNotification(canBASE_t *node, uint32 messageBox); + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +/**@}*/ +#ifdef __cplusplus +} +#endif + +#endif diff --git a/include/arch/rm46l8lp/halcogen/crc.h b/include/arch/rm46l8lp/halcogen/crc.h new file mode 100644 index 0000000..aa115ea --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/crc.h @@ -0,0 +1,326 @@ +/** @file CRC.h +* @brief CRC Driver Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the CRC driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __CRC_H__ +#define __CRC_H__ + +#include "reg_crc.h" + +#ifdef __cplusplus +extern "C" { +#endif +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* CRC General Definitions */ + +/** @def CRCLEVEL_ACTIVE +* @brief Alias name for CRC error operation level active +*/ +#define CRCLEVEL_ACTIVE 0x00U + + +/** @def CRC_AUTO +* @brief Alias name for CRC auto mode +*/ +#define CRC_AUTO 0x00000001U + + +/** @def CRC_SEMI_CPU +* @brief Alias name for semi cpu mode setting +*/ +#define CRC_SEMI_CPU 0x00000002U + + +/** @def CRC_FULL_CPU +* @brief Alias name for CRC cpu full mode +*/ +#define CRC_FULL_CPU 0x00000003U + + +/** @def CRC_CH4_TO +* @brief Alias name for channel4 time out interrupt flag +*/ +#define CRC_CH4_TO 0x10000000U + +/** @def CRC_CH4_UR +* @brief Alias name for channel4 underrun interrupt flag +*/ +#define CRC_CH4_UR 0x08000000U + +/** @def CRC_CH4_OR +* @brief Alias name for channel4 overrun interrupt flag +*/ +#define CRC_CH4_OR 0x04000000U + +/** @def CRC_CH4_FAIL +* @brief Alias name for channel4 crc fail interrupt flag +*/ +#define CRC_CH4_FAIL 0x02000000U + +/** @def CRC_CH4_CC +* @brief Alias name for channel4 compression complete interrupt flag +*/ +#define CRC_CH4_CC 0x01000000U + +/** @def CRC_CH3_TO +* @brief Alias name for channel3 time out interrupt flag +*/ +#define CRC_CH3_TO 0x00100000U + +/** @def CRC_CH3_UR +* @brief Alias name for channel3 underrun interrupt flag +*/ +#define CRC_CH3_UR 0x00080000U + +/** @def CRC_CH3_OR +* @brief Alias name for channel3 overrun interrupt flag +*/ +#define CRC_CH3_OR 0x00040000U + +/** @def CRC_CH3_FAIL +* @brief Alias name for channel3 crc fail interrupt flag +*/ +#define CRC_CH3_FAIL 0x00020000U + +/** @def CRC_CH3_CC +* @brief Alias name for channel3 compression complete interrupt flag +*/ +#define CRC_CH3_CC 0x00010000U + +/** @def CRC_CH2_TO +* @brief Alias name for channel2 time out interrupt flag +*/ +#define CRC_CH2_TO 0x00001000U + +/** @def CRC_CH2_UR +* @brief Alias name for channel2 underrun interrupt flag +*/ +#define CRC_CH2_UR 0x00000800U + +/** @def CRC_CH2_OR +* @brief Alias name for channel2 overrun interrupt flag +*/ +#define CRC_CH2_OR 0x00000400U + +/** @def CRC_CH2_FAIL +* @brief Alias name for channel2 crc fail interrupt flag +*/ +#define CRC_CH2_FAIL 0x00000200U + +/** @def CRC_CH2_CC +* @brief Alias name for channel2 compression complete interrupt flag +*/ +#define CRC_CH2_CC 0x00000100U + +/** @def CRC_CH1_TO +* @brief Alias name for channel1 time out interrupt flag +*/ +#define CRC_CH1_TO 0x00000010U + +/** @def CRC_CH1_UR +* @brief Alias name for channel1 underrun interrupt flag +*/ +#define CRC_CH1_UR 0x00000008U + + +/** @def CRC_CH1_OR +* @brief Alias name for channel1 overrun interrupt flag +*/ +#define CRC_CH1_OR 0x00000004U + +/** @def CRC_CH1_FAIL +* @brief Alias name for channel1 crc fail interrupt flag +*/ +#define CRC_CH1_FAIL 0x00000002U + +/** @def CRC_CH1_CC +* @brief Alias name for channel1 compression complete interrupt flag +*/ +#define CRC_CH1_CC 0x00000001U + +/** @def CRC_CH1 +* @brief Alias name for channel1 +*/ +#define CRC_CH1 0x00000000U + +/** @def CRC_CH1 +* @brief Alias name for channel2 +*/ +#define CRC_CH2 0x00000001U + +/** @def CRC_CH3 +* @brief Alias name for channel3 +*/ +#define CRC_CH3 0x00000002U + +/** @def CRC_CH4 +* @brief Alias name for channel4 +*/ +#define CRC_CH4 0x00000003U + +/** @struct crcModConfig +* @brief CRC mode specific parameters +* +* This type is used to pass crc mode specific parameters +*/ +/** @typedef crcModConfig_t +* @brief CRC Data Type Definition +*/ +typedef struct crcModConfig +{ + uint32 mode; /**< Mode of operation */ + uint32 crc_channel; /**< CRC channel-0,1 */ + uint64 * src_data_pat; /**< Pattern data */ + uint32 data_length; /**< Pattern data length.Number of 64 bit size word*/ +} crcModConfig_t; + +/** @struct crcConfig +* @brief CRC configuration for different modes +* +* This type is used to pass crc configuration +*/ +/** @typedef crcConfig_t +* @brief CRC Data Type Definition +*/ +typedef struct crcConfig +{ + uint32 crc_channel; /**< CRC channel-0,1 */ + uint32 mode; /**< Mode of operation */ + uint32 pcount; /**< Pattern count*/ + uint32 scount; /**< Sector count */ + uint32 wdg_preload; /**< Watchdog period */ + uint32 block_preload; /**< Block period*/ + +} crcConfig_t; + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +typedef struct crc_config_reg +{ + uint32 CONFIG_CTRL0; + uint32 CONFIG_CTRL1; + uint32 CONFIG_CTRL2; + uint32 CONFIG_INTS; + uint32 CONFIG_PCOUNT_REG1; + uint32 CONFIG_SCOUNT_REG1; + uint32 CONFIG_WDTOPLD1; + uint32 CONFIG_BCTOPLD1; + uint32 CONFIG_PCOUNT_REG2; + uint32 CONFIG_SCOUNT_REG2; + uint32 CONFIG_WDTOPLD2; + uint32 CONFIG_BCTOPLD2; +}crc_config_reg_t; + +#define CRC_CTRL0_CONFIGVALUE 0x00000000U +#define CRC_CTRL1_CONFIGVALUE 0x00000000U +#define CRC_CTRL2_CONFIGVALUE ((uint32)((uint32)0U << 4U) | (uint32)(CRC_FULL_CPU) | (uint32)((uint32)CRC_FULL_CPU << 8U)) +#define CRC_INTS_CONFIGVALUE (0x00000000U | 0x00000000U | 0x00000000U | 0x00000000U | 0x00000000U | 0x00000000U | 0x00000000U | 0x00000000U | 0x00000000U | 0x00000000U) +#define CRC_PCOUNT_REG1_CONFIGVALUE (0x00000000U) +#define CRC_SCOUNT_REG1_CONFIGVALUE (0x00000000U) +#define CRC_WDTOPLD1_CONFIGVALUE (0x00000000U) +#define CRC_BCTOPLD1_CONFIGVALUE (0x00000000U) +#define CRC_PCOUNT_REG2_CONFIGVALUE (0x00000000U) +#define CRC_SCOUNT_REG2_CONFIGVALUE (0x00000000U) +#define CRC_WDTOPLD2_CONFIGVALUE (0x00000000U) +#define CRC_BCTOPLD2_CONFIGVALUE (0x00000000U) + +/** + * @defgroup CRC CRC + * @brief Cyclic Redundancy Check Controller Module. + * + * The CRC controller is a module that is used to perform CRC (Cyclic Redundancy Check) to verify the + * integrity of memory system. A signature representing the contents of the memory is obtained when the + * contents of the memory are read into CRC controller. The responsibility of CRC controller is to calculate + * the signature for a set of data and then compare the calculated signature value against a pre-determined + * good signature value. CRC controller supports two channels to perform CRC calculation on multiple + * memories in parallel and can be used on any memory system. + * + * Related Files + * - reg_crc.h + * - crc.h + * - crc.c + * @addtogroup CRC + * @{ + */ + +/* CRC Interface Functions */ +void crcInit(void); +void crcSendPowerDown(crcBASE_t *crc); +void crcSignGen(crcBASE_t *crc,crcModConfig_t *param); +void crcSetConfig(crcBASE_t *crc,crcConfig_t *param); +uint64 crcGetPSASig(crcBASE_t *crc,uint32 channel); +uint64 crcGetSectorSig(crcBASE_t *crc,uint32 channel); +uint32 crcGetFailedSector(crcBASE_t *crc,uint32 channel); +uint32 crcGetIntrPend(crcBASE_t *crc,uint32 channel); +void crcChannelReset(crcBASE_t *crc,uint32 channel); +void crcEnableNotification(crcBASE_t *crc, uint32 flags); +void crcDisableNotification(crcBASE_t *crc, uint32 flags); +void crcGetConfigValue(crc_config_reg_t *config_reg, config_value_type_t type); + +/** @fn void crcNotification(crcBASE_t *crc, uint32 flags) +* @brief Interrupt callback +* @param[in] crc - crc module base address +* @param[in] flags - copy of error interrupt flags +* +* This is a callback that is provided by the application and is called upon +* an interrupt. The parameter passed to the callback is a copy of the +* interrupt flag register. +*/ +void crcNotification(crcBASE_t *crc, uint32 flags); + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +/**@}*/ +#ifdef __cplusplus +} +#endif /*extern "C" */ + +#endif diff --git a/include/arch/rm46l8lp/halcogen/dcc.h b/include/arch/rm46l8lp/halcogen/dcc.h new file mode 100644 index 0000000..e04d771 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/dcc.h @@ -0,0 +1,306 @@ +/** @file dcc.h +* @brief DCC Driver Definition File +* @date 11-Dec-2018 +* @version 04.07.01 +* +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __DCC_H__ +#define __DCC_H__ + +#include "reg_dcc.h" +#ifdef __cplusplus +extern "C" { +#endif +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* DCC General Definitions */ + +/** @def dcc1CNT0_CLKSRC_HFLPO +* @brief Alias name for DCC1 Counter 0 Clock Source HFLPO +* +* This is an alias name for the Clock Source HFLPO for DCC1 Counter 0. +* +* @note This value should be used for API argument @a cnt0_Clock_Source +*/ +#define dcc1CNT0_CLKSRC_HFLPO 0x00000005U + +/** @def dcc1CNT0_CLKSRC_TCK +* @brief Alias name for DCC1 Counter 0 Clock Source TCK +* +* This is an alias name for the Clock Source TCK for DCC1 Counter 0. +* +* @note This value should be used for API argument @a cnt0_Clock_Source +*/ +#define dcc1CNT0_CLKSRC_TCK 0x0000000AU + +/** @def dcc1CNT0_CLKSRC_OSCIN +* @brief Alias name for DCC1 Counter 0 Clock Source OSCIN +* +* This is an alias name for the Clock Source OSCIN for DCC1 Counter 0. +* +* @note This value should be used for API argument @a cnt0_Clock_Source +*/ +#define dcc1CNT0_CLKSRC_OSCIN 0x0000000FU + +/** @def dcc1CNT1_CLKSRC_PLL1 +* @brief Alias name for DCC1 Counter 1 Clock Source PLL1 +* +* This is an alias name for the Clock Source PLL for DCC1 Counter 1. +* +* @note This value should be used for API argument @a cnt1_Clock_Source +*/ +#define dcc1CNT1_CLKSRC_PLL1 0x0000A000U + +/** @def dcc1CNT1_CLKSRC_PLL2 +* @brief Alias name for DCC1 Counter 1 Clock Source PLL2 +* +* This is an alias name for the Clock Source OSCIN for DCC1 Counter 1. +* +* @note This value should be used for API argument @a cnt1_Clock_Source +*/ +#define dcc1CNT1_CLKSRC_PLL2 0x0000A001U + +/** @def dcc1CNT1_CLKSRC_LFLPO +* @brief Alias name for DCC1 Counter 1 Clock Source LFLPO +* +* This is an alias name for the Clock Source LFLPO for DCC1 Counter 1. +* +* @note This value should be used for API argument @a cnt1_Clock_Source +*/ +#define dcc1CNT1_CLKSRC_LFLPO 0x0000A002U + +/** @def dcc1CNT1_CLKSRC_HFLPO +* @brief Alias name for DCC1 Counter 1 Clock Source HFLPO +* +* This is an alias name for the Clock Source HFLPO for DCC1 Counter 1. +* +* @note This value should be used for API argument @a cnt1_Clock_Source +*/ +#define dcc1CNT1_CLKSRC_HFLPO 0x0000A003U + +/** @def dcc1CNT1_CLKSRC_EXTCLKIN1 +* @brief Alias name for DCC1 Counter 1 Clock Source EXTCLKIN1 +* +* This is an alias name for the Clock Source EXTCLKIN1 for DCC1 Counter 1. +* +* @note This value should be used for API argument @a cnt1_Clock_Source +*/ +#define dcc1CNT1_CLKSRC_EXTCLKIN1 0x0000A005U + +/** @def dcc1CNT1_CLKSRC_EXTCLKIN2 +* @brief Alias name for DCC1 Counter 1 Clock Source EXTCLKIN2 +* +* This is an alias name for the Clock Source EXTCLKIN2 for DCC1 Counter 1. +* +* @note This value should be used for API argument @a cnt1_Clock_Source +*/ +#define dcc1CNT1_CLKSRC_EXTCLKIN2 0x0000A006U + +/** @def dcc1CNT1_CLKSRC_VCLK +* @brief Alias name for DCC1 Counter 1 Clock Source VCLK +* +* This is an alias name for the Clock Source VCLK for DCC1 Counter 1. +* +* @note This value should be used for API argument @a cnt1_Clock_Source +*/ +#define dcc1CNT1_CLKSRC_VCLK 0x0000A008U + +/** @def dcc1CNT1_CLKSRC_N2HET1_31 +* @brief Alias name for DCC1 Counter 1 Clock Source N2HET1_31 +* +* This is an alias name for the Clock Source N2HET1_31 for DCC1 Counter 1. +* +* @note This value should be used for API argument @a cnt1_Clock_Source +*/ +#define dcc1CNT1_CLKSRC_N2HET1_31 0x0000500FU + +/** @def dcc2CNT0_CLKSRC_TCK +* @brief Alias name for DCC2 Counter 0 Clock Source TCK +* +* This is an alias name for the Clock Source TCK for DCC2 Counter 0. +* +* @note This value should be used for API argument @a cnt0_Clock_Source +*/ +#define dcc2CNT0_CLKSRC_TCK 0x0000000AU + +/** @def dcc1CNT0_CLKSRC_OSCIN +* @brief Alias name for DCC1 Counter 0 Clock Source OSCIN +* +* This is an alias name for the Clock Source OSCIN for DCC2 Counter 0. +* +* @note This value should be used for API argument @a cnt0_Clock_Source +*/ +#define dcc2CNT0_CLKSRC_OSCIN 0x0000000FU + +/** @def dcc2CNT1_CLKSRC_VCLK +* @brief Alias name for DCC2 Counter 1 Clock Source VCLK +* +* This is an alias name for the Clock Source VCLK for DCC2 Counter 1. +* +* @note This value should be used for API argument @a cnt1_Clock_Source +*/ +#define dcc2CNT1_CLKSRC_VCLK 0x0000A008U + +/** @def dcc2CNT1_CLKSRC_N2HET1_0 +* @brief Alias name for DCC2 Counter 1 Clock Source N2HET2_0 +* +* This is an alias name for the Clock Source N2HET2_0 for DCC2 Counter 1. +* +* @note This value should be used for API argument @a cnt1_Clock_Source +*/ +#define dcc2CNT1_CLKSRC_N2HET1_0 0x0000500FU + +/** @def dccNOTIFICATION_DONE +* @brief Alias name for DCC Done notification +* +* This is an alias name for the DCC Done notification. +* +* @note This value should be used for API argument @a notification +*/ +#define dccNOTIFICATION_DONE 0x0000A000U + +/** @def dccNOTIFICATION_ERROR +* @brief Alias name for DCC Error notification +* +* This is an alias name for the DCC Error notification. +* +* @note This value should be used for API argument @a notification +*/ +#define dccNOTIFICATION_ERROR 0x000000A0U + + +/** @enum dcc1clocksource +* @brief Alias names for dcc clock sources +* +* This enumeration is used to provide alias names for the clock sources: +*/ +enum dcc1clocksource +{ + DCC1_CNT0_HF_LPO = 0x5U, /**< Alias for DCC1 CNT 0 CLOCK SOURCE 0*/ + DCC1_CNT0_TCK = 0xAU, /**< Alias for DCC1 CNT 0 CLOCK SOURCE 1*/ + DCC1_CNT0_OSCIN = 0xFU, /**< Alias for DCC1 CNT 0 CLOCK SOURCE 2*/ + + DCC1_CNT1_PLL1 = 0x0U, /**< Alias for DCC1 CNT 1 CLOCK SOURCE 0*/ + DCC1_CNT1_PLL2 = 0x1U, /**< Alias for DCC1 CNT 1 CLOCK SOURCE 1*/ + DCC1_CNT1_LF_LPO = 0x2U, /**< Alias for DCC1 CNT 1 CLOCK SOURCE 2*/ + DCC1_CNT1_HF_LPO = 0x3U, /**< Alias for DCC1 CNT 1 CLOCK SOURCE 3*/ + DCC1_CNT1_EXTCLKIN1 = 0x5U, /**< Alias for DCC1 CNT 1 CLOCK SOURCE 4*/ + DCC1_CNT1_EXTCLKIN2 = 0x6U, /**< Alias for DCC1 CNT 1 CLOCK SOURCE 6*/ + DCC1_CNT1_VCLK = 0x8U, /**< Alias for DCC1 CNT 1 CLOCK SOURCE 8*/ + DCC1_CNT1_N2HET1_31 = 0xAU /**< Alias for DCC1 CNT 1 CLOCK SOURCE 9*/ +}; + +/** @enum dcc2clocksource +* @brief Alias names for dcc clock sources +* +* This enumeration is used to provide alias names for the clock sources: +*/ +enum dcc2clocksource +{ + DCC2_CNT0_OSCIN = 0xFU, /**< Alias for DCC1 CNT 0 CLOCK SOURCE 0*/ + DCC2_CNT0_TCK = 0xAU, /**< Alias for DCC1 CNT 0 CLOCK SOURCE 2*/ + + DCC2_CNT1_VCLK = 0x8U, /**< Alias for DCC1 CNT 1 CLOCK SOURCE 8*/ + DCC2_CNT1_N2HET2_0 = 0xAU /**< Alias for DCC1 CNT 1 CLOCK SOURCE 9*/ +}; + +/* Configuration registers */ +typedef struct dcc_config_reg +{ + uint32 CONFIG_GCTRL; + uint32 CONFIG_CNT0SEED; + uint32 CONFIG_VALID0SEED; + uint32 CONFIG_CNT1SEED; + uint32 CONFIG_CNT1CLKSRC; + uint32 CONFIG_CNT0CLKSRC; +} dcc_config_reg_t; + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/** + * @defgroup DCC DCC + * @brief Dual-Clock Comparator Module + * + * The primary purpose of a DCC module is to measure the frequency of a clock signal using a second + * known clock signal as a reference. This capability can be used to ensure the correct frequency range for + * several different device clock sources, thereby enhancing the system safety metrics. + * + * Related Files + * - reg_dcc.h + * - dcc.h + * - dcc.c + * @addtogroup DCC + * @{ + */ + +/* DCC Interface Functions */ +void dccInit(void); +void dccSetCounter0Seed(dccBASE_t *dcc, uint32 cnt0seed); +void dccSetTolerance(dccBASE_t *dcc, uint32 valid0seed); +void dccSetCounter1Seed(dccBASE_t *dcc, uint32 cnt1seed); +void dccSetSeed(dccBASE_t *dcc, uint32 cnt0seed, uint32 valid0seed, uint32 cnt1seed); +void dccSelectClockSource(dccBASE_t *dcc, uint32 cnt0_Clock_Source, uint32 cnt1_Clock_Source); +void dccEnable(dccBASE_t *dcc); +void dccDisable(dccBASE_t *dcc); +uint32 dccGetErrStatus(dccBASE_t *dcc); + +void dccEnableNotification(dccBASE_t *dcc, uint32 notification); +void dccDisableNotification(dccBASE_t *dcc, uint32 notification); +void dcc1GetConfigValue(dcc_config_reg_t *config_reg, config_value_type_t type); +void dcc2GetConfigValue(dcc_config_reg_t *config_reg, config_value_type_t type); +/** @fn void dccNotification(dccBASE_t *dcc,uint32 flags) +* @brief Interrupt callback +* @param[in] dcc - dcc module base address +* @param[in] flags - status flags +* +* This is a callback function provided by the application. It is call when +* a dcc is complete or detected error. +*/ +void dccNotification(dccBASE_t *dcc,uint32 flags); + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ +/**@}*/ +#ifdef __cplusplus +} +#endif + +#endif diff --git a/include/arch/rm46l8lp/halcogen/ecap.h b/include/arch/rm46l8lp/halcogen/ecap.h new file mode 100644 index 0000000..dd76b8c --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/ecap.h @@ -0,0 +1,260 @@ +/** @file ecap.h +* @brief ECAP Driver Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the ECAP driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __ECAP_H__ +#define __ECAP_H__ + +#include "reg_ecap.h" + + + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ +/** @brief Enumeration to define the capture (CAP) interrupts +*/ +typedef enum +{ + ecapInt_CTR_CMP = 0x0080U, /*< Denotes CTR = CMP interrupt */ + ecapInt_CTR_PRD = 0x0040U, /*< Denotes CTR = PRD interrupt */ + ecapInt_CTR_OVF = 0x0020U, /*< Denotes CTROVF interrupt */ + ecapInt_CEVT4 = 0x0010U, /*< Denotes CEVT4 interrupt */ + ecapInt_CEVT3 = 0x0008U, /*< Denotes CEVT3 interrupt */ + ecapInt_CEVT2 = 0x0004U, /*< Denotes CEVT2 interrupt */ + ecapInt_CEVT1 = 0x0002U, /*< Denotes CEVT1 interrupt */ + ecapInt_Global = 0x0001U, /*< Denotes Capture global interrupt */ + ecapInt_All = 0x00FFU /*< Denotes All interrupts */ +} ecapInterrupt_t; + +/** @brief Enumeration to define the capture (CAP) prescaler values +*/ +typedef enum +{ + ecapPrescale_By_1 = ((uint16)0U << 9U), /*< Divide by 1 */ + ecapPrescale_By_2 = ((uint16)1U << 9U), /*< Divide by 2 */ + ecapPrescale_By_4 = ((uint16)2U << 9U), /*< Divide by 4 */ + ecapPrescale_By_6 = ((uint16)3U << 9U), /*< Divide by 6 */ + ecapPrescale_By_8 = ((uint16)4U << 9U), /*< Divide by 8 */ + ecapPrescale_By_10 = ((uint16)5U << 9U), /*< Divide by 10 */ + ecapPrescale_By_12 = ((uint16)6U << 9U), /*< Divide by 12 */ + ecapPrescale_By_14 = ((uint16)7U << 9U), /*< Divide by 14 */ + ecapPrescale_By_16 = ((uint16)8U << 9U), /*< Divide by 16 */ + ecapPrescale_By_18 = ((uint16)9U << 9U), /*< Divide by 18 */ + ecapPrescale_By_20 = ((uint16)10U << 9U), /*< Divide by 20 */ + ecapPrescale_By_22 = ((uint16)11U << 9U), /*< Divide by 22 */ + ecapPrescale_By_24 = ((uint16)12U << 9U), /*< Divide by 24 */ + ecapPrescale_By_26 = ((uint16)13U << 9U), /*< Divide by 26 */ + ecapPrescale_By_28 = ((uint16)14U << 9U), /*< Divide by 28 */ + ecapPrescale_By_30 = ((uint16)15U << 9U), /*< Divide by 30 */ + ecapPrescale_By_32 = ((uint16)16U << 9U), /*< Divide by 32 */ + ecapPrescale_By_34 = ((uint16)17U << 9U), /*< Divide by 34 */ + ecapPrescale_By_36 = ((uint16)18U << 9U), /*< Divide by 36 */ + ecapPrescale_By_38 = ((uint16)19U << 9U), /*< Divide by 38 */ + ecapPrescale_By_40 = ((uint16)20U << 9U), /*< Divide by 40 */ + ecapPrescale_By_42 = ((uint16)21U << 9U), /*< Divide by 42 */ + ecapPrescale_By_44 = ((uint16)22U << 9U), /*< Divide by 44 */ + ecapPrescale_By_46 = ((uint16)23U << 9U), /*< Divide by 46 */ + ecapPrescale_By_48 = ((uint16)24U << 9U), /*< Divide by 48 */ + ecapPrescale_By_50 = ((uint16)25U << 9U), /*< Divide by 50 */ + ecapPrescale_By_52 = ((uint16)26U << 9U), /*< Divide by 52 */ + ecapPrescale_By_54 = ((uint16)27U << 9U), /*< Divide by 54 */ + ecapPrescale_By_56 = ((uint16)28U << 9U), /*< Divide by 56 */ + ecapPrescale_By_58 = ((uint16)29U << 9U), /*< Divide by 58 */ + ecapPrescale_By_60 = ((uint16)30U << 9U), /*< Divide by 60 */ + ecapPrescale_By_62 = ((uint16)31U << 9U) /*< Divide by 62 */ +} ecapPrescale_t; + +/** @brief Enumeration to define the Sync Out options +*/ +typedef enum +{ + SyncOut_SyncIn = ((uint16)0U << 6U), /*< Sync In used for Sync Out */ + SyncOut_CTRPRD = ((uint16)1U << 6U), /*< CTR = PRD used for Sync Out */ + SyncOut_None = ((uint16)2U << 6U) /*< Disables Sync Out */ +} ecapSyncOut_t; + +/** @brief Enumeration to define the Polarity +*/ +typedef enum +{ + RISING_EDGE = 0U, + FALLING_EDGE = 1U +}ecapEdgePolarity_t; + +typedef enum +{ + ACTIVE_HIGH = 0U, + ACTIVE_LOW = 1U +}ecapAPWMPolarity_t; + +/** @brief Enumeration to define the Mode of operation +*/ +typedef enum +{ + CONTINUOUS = 0U, + ONE_SHOT = 1U +}ecapMode_t; + +/** @brief Enumeration to define the capture events +*/ +typedef enum +{ + CAPTURE_EVENT1 = 0U, + CAPTURE_EVENT2 = 1U, + CAPTURE_EVENT3 = 2U, + CAPTURE_EVENT4 = 3U +}ecapEvent_t ; + +typedef enum +{ + RESET_ENABLE = 1U, + RESET_DISABLE = 0U +}ecapReset_t ; + +typedef struct ecap_config_reg + { + uint32 CONFIG_CTRPHS; + uint16 CONFIG_ECCTL1; + uint16 CONFIG_ECCTL2; + uint16 CONFIG_ECEINT; +}ecap_config_reg_t; + +#define ECAP1_CTRPHS_CONFIGVALUE 0x00000000U +#define ECAP1_ECCTL1_CONFIGVALUE ((uint16)((uint16)RISING_EDGE << 0U) | (uint16)((uint16)RESET_DISABLE << 1U) | (uint16)((uint16)RISING_EDGE << 2U) | (uint16)((uint16)RESET_DISABLE << 3U) | (uint16)((uint16)RISING_EDGE << 4U)| (uint16)((uint16)RESET_DISABLE << 5U) | (uint16)((uint16)RISING_EDGE << 6U) | (uint16)((uint16)RESET_DISABLE << 7U) | (uint16)((uint16)0U << 8U) | (uint16)((uint16)0U << 9U)) +#define ECAP1_ECCTL2_CONFIGVALUE ((uint16)((uint16)ONE_SHOT << 0U) | (uint16)((uint16)CAPTURE_EVENT1 << 1U) | (uint16)((uint16)0U << 9U) | (uint16)0x00000010U) +#define ECAP1_ECEINT_CONFIGVALUE (0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U) + +#define ECAP2_CTRPHS_CONFIGVALUE 0x00000000U +#define ECAP2_ECCTL1_CONFIGVALUE ((uint16)((uint16)RISING_EDGE << 0U) | (uint16)((uint16)RESET_DISABLE << 1U) | (uint16)((uint16)RISING_EDGE << 2U) | (uint16)((uint16)RESET_DISABLE << 3U) | (uint16)((uint16)RISING_EDGE << 4U)| (uint16)((uint16)RESET_DISABLE << 5U) | (uint16)((uint16)RISING_EDGE << 6U) | (uint16)((uint16)RESET_DISABLE << 7U) | (uint16)((uint16)0U << 8U) | (uint16)((uint16)0U << 9U)) +#define ECAP2_ECCTL2_CONFIGVALUE ((uint16)((uint16)ONE_SHOT << 0U) | (uint16)((uint16)CAPTURE_EVENT1 << 1U) | (uint16)((uint16)0U << 9U) | (uint16)0x00000010U) +#define ECAP2_ECEINT_CONFIGVALUE (0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U) + +#define ECAP3_CTRPHS_CONFIGVALUE 0x00000000U +#define ECAP3_ECCTL1_CONFIGVALUE ((uint16)((uint16)RISING_EDGE << 0U) | (uint16)((uint16)RESET_DISABLE << 1U) | (uint16)((uint16)RISING_EDGE << 2U) | (uint16)((uint16)RESET_DISABLE << 3U) | (uint16)((uint16)RISING_EDGE << 4U)| (uint16)((uint16)RESET_DISABLE << 5U) | (uint16)((uint16)RISING_EDGE << 6U) | (uint16)((uint16)RESET_DISABLE << 7U) | (uint16)((uint16)0U << 8U) | (uint16)((uint16)0U << 9U)) +#define ECAP3_ECCTL2_CONFIGVALUE ((uint16)((uint16)ONE_SHOT << 0U) | (uint16)((uint16)CAPTURE_EVENT1 << 1U) | (uint16)((uint16)0U << 9U) | (uint16)0x00000010U) +#define ECAP3_ECEINT_CONFIGVALUE (0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U) + +#define ECAP4_CTRPHS_CONFIGVALUE 0x00000000U +#define ECAP4_ECCTL1_CONFIGVALUE ((uint16)((uint16)RISING_EDGE << 0U) | (uint16)((uint16)RESET_DISABLE << 1U) | (uint16)((uint16)RISING_EDGE << 2U) | (uint16)((uint16)RESET_DISABLE << 3U) | (uint16)((uint16)RISING_EDGE << 4U)| (uint16)((uint16)RESET_DISABLE << 5U) | (uint16)((uint16)RISING_EDGE << 6U) | (uint16)((uint16)RESET_DISABLE << 7U) | (uint16)((uint16)0U << 8U) | (uint16)((uint16)0U << 9U)) +#define ECAP4_ECCTL2_CONFIGVALUE ((uint16)((uint16)ONE_SHOT << 0U) | (uint16)((uint16)CAPTURE_EVENT1 << 1U) | (uint16)((uint16)0U << 9U) | (uint16)0x00000010U) +#define ECAP4_ECEINT_CONFIGVALUE (0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U) + +#define ECAP5_CTRPHS_CONFIGVALUE 0x00000000U +#define ECAP5_ECCTL1_CONFIGVALUE ((uint16)((uint16)RISING_EDGE << 0U) | (uint16)((uint16)RESET_DISABLE << 1U) | (uint16)((uint16)RISING_EDGE << 2U) | (uint16)((uint16)RESET_DISABLE << 3U) | (uint16)((uint16)RISING_EDGE << 4U)| (uint16)((uint16)RESET_DISABLE << 5U) | (uint16)((uint16)RISING_EDGE << 6U) | (uint16)((uint16)RESET_DISABLE << 7U) | (uint16)((uint16)0U << 8U) | (uint16)((uint16)0U << 9U)) +#define ECAP5_ECCTL2_CONFIGVALUE ((uint16)((uint16)ONE_SHOT << 0U) | (uint16)((uint16)CAPTURE_EVENT1 << 1U) | (uint16)((uint16)0U << 9U) | (uint16)0x00000010U) +#define ECAP5_ECEINT_CONFIGVALUE (0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U) + +#define ECAP6_CTRPHS_CONFIGVALUE 0x00000000U +#define ECAP6_ECCTL1_CONFIGVALUE ((uint16)((uint16)RISING_EDGE << 0U) | (uint16)((uint16)RESET_DISABLE << 1U) | (uint16)((uint16)RISING_EDGE << 2U) | (uint16)((uint16)RESET_DISABLE << 3U) | (uint16)((uint16)RISING_EDGE << 4U)| (uint16)((uint16)RESET_DISABLE << 5U) | (uint16)((uint16)RISING_EDGE << 6U) | (uint16)((uint16)RESET_DISABLE << 7U) | (uint16)((uint16)0U << 8U) | (uint16)((uint16)0U << 9U)) +#define ECAP6_ECCTL2_CONFIGVALUE ((uint16)((uint16)ONE_SHOT << 0U) | (uint16)((uint16)CAPTURE_EVENT1 << 1U) | (uint16)((uint16)0U << 9U) | (uint16)0x00000010U) +#define ECAP6_ECEINT_CONFIGVALUE (0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U | 0x0000U) + +/** + * @defgroup eCAP eCAP + * @brief Enhanced Capture Module. + * + * The enhanced Capture (eCAP) module is essential in systems where accurate timing of external events is + * important. This microcontroller implements 6 instances of the eCAP module. + * + * Related Files + * - reg_ecap.h + * - ecap.h + * - ecap.c + * @addtogroup eCAP + * @{ + */ +void ecapInit(void); +void ecapSetCounter(ecapBASE_t *ecap, uint32 value); +void ecapEnableCounterLoadOnSync(ecapBASE_t *ecap, uint32 phase); +void ecapDisableCounterLoadOnSync(ecapBASE_t *ecap); +void ecapSetEventPrescaler(ecapBASE_t *ecap, ecapPrescale_t prescale); +void ecapSetCaptureEvent1(ecapBASE_t *ecap, ecapEdgePolarity_t edgePolarity, ecapReset_t resetenable); +void ecapSetCaptureEvent2(ecapBASE_t *ecap, ecapEdgePolarity_t edgePolarity, ecapReset_t resetenable); +void ecapSetCaptureEvent3(ecapBASE_t *ecap, ecapEdgePolarity_t edgePolarity, ecapReset_t resetenable); +void ecapSetCaptureEvent4(ecapBASE_t *ecap, ecapEdgePolarity_t edgePolarity, ecapReset_t resetenable); +void ecapSetCaptureMode(ecapBASE_t *ecap, ecapMode_t capMode, ecapEvent_t event); +void ecapEnableCapture(ecapBASE_t *ecap); +void ecapDisableCapture(ecapBASE_t *ecap); +void ecapStartCounter(ecapBASE_t *ecap); +void ecapStopCounter(ecapBASE_t *ecap); +void ecapSetSyncOut(ecapBASE_t *ecap, ecapSyncOut_t syncOutSrc); +void ecapEnableAPWMmode(ecapBASE_t *ecap, ecapAPWMPolarity_t pwmPolarity, uint32 period, uint32 duty); +void ecapDisableAPWMMode(ecapBASE_t *ecap); +void ecapEnableInterrupt(ecapBASE_t *ecap, ecapInterrupt_t interrupts); +void ecapDisableInterrupt(ecapBASE_t *ecap, ecapInterrupt_t interrupts); +uint16 ecapGetEventStatus(ecapBASE_t *ecap, ecapInterrupt_t events); +void ecapClearFlag(ecapBASE_t *ecap, ecapInterrupt_t events); +uint32 ecapGetCAP1(ecapBASE_t *ecap); +uint32 ecapGetCAP2(ecapBASE_t *ecap); +uint32 ecapGetCAP3(ecapBASE_t *ecap); +uint32 ecapGetCAP4(ecapBASE_t *ecap); +void ecap1GetConfigValue(ecap_config_reg_t *config_reg, config_value_type_t type); +void ecap2GetConfigValue(ecap_config_reg_t *config_reg, config_value_type_t type); +void ecap3GetConfigValue(ecap_config_reg_t *config_reg, config_value_type_t type); +void ecap4GetConfigValue(ecap_config_reg_t *config_reg, config_value_type_t type); +void ecap5GetConfigValue(ecap_config_reg_t *config_reg, config_value_type_t type); +void ecap6GetConfigValue(ecap_config_reg_t *config_reg, config_value_type_t type); + +/** @brief Interrupt callback +* @param[in] ecap Handle to CAP object +* @param[in] flags Copy of interrupt flags +*/ +void ecapNotification(ecapBASE_t *ecap,uint16 flags); + +/**@}*/ + +#ifdef __cplusplus +} +#endif /*extern "C" */ + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ +#endif /*end of _CAP_H_ definition */ diff --git a/include/arch/rm46l8lp/halcogen/emac.h b/include/arch/rm46l8lp/halcogen/emac.h new file mode 100644 index 0000000..c568cd7 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/emac.h @@ -0,0 +1,404 @@ +/** + * \file emac.h + * + * \brief EMAC APIs and macros. + * + * This file contains the driver API prototypes and macro definitions. + */ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __EMAC_H__ +#define __EMAC_H__ + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +#include "sys_common.h" +#include "hw_reg_access.h" +#include "hw_emac.h" +#include "hw_emac_ctrl.h" +#include "mdio.h" +#include "phy_dp83640.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/*****************************************************************************/ +/* +** Macros which can be used as speed parameter to the API EMACRMIISpeedSet +*/ +#define EMAC_RMIISPEED_10MBPS (0x00000000U) +#define EMAC_RMIISPEED_100MBPS (0x00008000U) + +/* Macros for enabling taken as inputs from HALCoGen GUI. */ +#define EMAC_TX_ENABLE (1U) +#define EMAC_RX_ENABLE (1U) +#define EMAC_MII_ENABLE (1U) +#define EMAC_FULL_DUPLEX_ENABLE (1U) +#define EMAC_LOOPBACK_ENABLE (0U) +#define EMAC_BROADCAST_ENABLE (1U) +#define EMAC_UNICAST_ENABLE (1U) +#define EMAC_CHANNELNUMBER (0U) +#define EMAC_PHYADDRESS (0U) + +/* + * Macros to indicate EMAC Channel Numbers + */ +#define EMAC_CHANNEL_0 (0x00000000U) +#define EMAC_CHANNEL_1 (0x00000001U) +#define EMAC_CHANNEL_2 (0x00000002U) +#define EMAC_CHANNEL_3 (0x00000003U) +#define EMAC_CHANNEL_4 (0x00000004U) +#define EMAC_CHANNEL_5 (0x00000005U) +#define EMAC_CHANNEL_6 (0x00000006U) +#define EMAC_CHANNEL_7 (0x00000007U) +/* Macros which can be used as duplexMode parameter to the API +** EMACDuplexSet +*/ +#define EMAC_DUPLEX_FULL (0x00000001U) +#define EMAC_DUPLEX_HALF (0x00000000U) + +/* +** Macros which can be used as matchFilt parameters to the API +** EMACMACAddrSet +*/ +/* Address not used to match/filter incoming packets */ +#define EMAC_MACADDR_NO_MATCH_NO_FILTER (0x00000000U) + +/* Address will be used to filter incoming packets */ +#define EMAC_MACADDR_FILTER (0x00100000U) + +/* Address will be used to match incoming packets */ +#define EMAC_MACADDR_MATCH (0x00180000U) + +/* +** Macros which can be passed as eoiFlag to EMACRxIntAckToClear API +*/ +#define EMAC_INT_CORE0_RX (0x1U) +#define EMAC_INT_CORE1_RX (0x5U) +#define EMAC_INT_CORE2_RX (0x9U) + +/* +** Macros which can be passed as eoiFlag to EMACTxIntAckToClear API +*/ +#define EMAC_INT_CORE0_TX (0x2U) +#define EMAC_INT_CORE1_TX (0x6U) +#define EMAC_INT_CORE2_TX (0xAU) +/* Base Addresses */ +#define EMAC_CTRL_RAM_0_BASE 0xFC520000U +#define EMAC_0_BASE 0xFCF78000U +#define EMAC_CTRL_0_BASE 0xFCF78800U +#define MDIO_0_BASE 0xFCF78900U + +/*MAC address length*/ +#define EMAC_HWADDR_LEN 6U +#define MAX_EMAC_INSTANCE 1U +#define SIZE_EMAC_CTRL_RAM 0x2000U +#define MAX_TRANSFER_UNIT 1514U +#define MAX_RX_PBUF_ALLOC (10U) +#define MIN_PKT_LEN 60U +#define MIN_PACKET_SIZE (46U) + + + + +#define EMAC_BUF_DESC_OWNER 0x20000000U +#define EMAC_BUF_DESC_SOP 0x80000000U +#define EMAC_BUF_DESC_EOP 0x40000000U +#define EMAC_BUF_DESC_EOQ 0x10000000U + +#define EMAC_NETSTATREGS(n) ((uint32)0x200U + (uint32)((n)*4U)) + +/* Error Signalling Macros */ +#define EMAC_ERR_CONNECT 0x2U /* Not connected. */ +#define EMAC_ERR_OK 0x1U /* No error, everything OK. */ + + +/* Macros for Configuration Value Registers */ +#define EMAC_TXCONTROL_CONFIGVALUE 0x00000001U +#define EMAC_RXCONTROL_CONFIGVALUE 0x00000001U +#define EMAC_TXINTMASKSET_CONFIGVALUE 0x00000001U +#define EMAC_TXINTMASKCLEAR_CONFIGVALUE 0x00000001U +#define EMAC_RXINTMASKSET_CONFIGVALUE 0x00000001U +#define EMAC_RXINTMASKCLEAR_CONFIGVALUE 0x00000001U +#define EMAC_MACSRCADDRHI_CONFIGVALUE ((uint32)((uint32)0xFFU << 24U) | (uint32)((uint32)0xFFU << 16U) | (uint32)((uint32)0xFFU << 8U) | (uint32)((uint32)0xFFU)) +#define EMAC_MACSRCADDRLO_CONFIGVALUE ((uint32)((uint32)0xFFU << 8U) | (uint32)((uint32)0xFFU)) +#define EMAC_MDIOCONTROL_CONFIGVALUE 0x4114001FU +#define EMAC_C0RXEN_CONFIGVALUE 0x00000001U +#define EMAC_C0TXEN_CONFIGVALUE 0x00000001U + +/* Structure to store pending status from the Tx Interrupt Status Registers. */ +typedef struct emac_tx_int_status{ + volatile uint32 intstatmasked; /* Pending interrupt status read from the Transmit Interrupt Status (Masked) Register (TXINTSTATMASKED) */ + volatile uint32 intstatraw; /* Pending interrupt status read from the Transmit Interrupt Status (Unmasked) Register (TXINTSTATRAW) */ +}emac_tx_int_status_t; + +/* Structure to store pending status from the Rx Interrupt Status Registers. */ +typedef struct emac_rx_int_status{ + + volatile uint32 intstatmasked_pend; /* Reads RXnPEND value from the Receive Interrupt Status (Unmasked) Register (RXINTSTATRAW) */ + volatile uint32 intstatmasked_threshpend; /* Reads RXnTRHESHPEND value from the Receive Interrupt Status (Unmasked) Register (RXINTSTATRAW) */ + + volatile uint32 intstatraw_pend; /* Reads RXnPEND value from the Receive Interrupt Status (Unmasked) Register (RXINTSTATRAW) */ + volatile uint32 intstatraw_threshpend; /* Reads RXnTRHESHPEND value from the Receive Interrupt Status (Unmasked) Register (RXINTSTATRAW) */ + +}emac_rx_int_status_t; + +/* EMAC TX Buffer descriptor data structure - Refer TRM for details about the buffer descriptor structure.*/ +typedef struct emac_tx_bd { + volatile struct emac_tx_bd *next; + volatile uint32 bufptr; /* Pointer to the actual Buffer storing the data to be transmitted. */ + volatile uint32 bufoff_len; /*Buffer Offset and Buffer Length (16 bits each) */ + volatile uint32 flags_pktlen; /*Status flags and Packet Length. (16 bits each)*/ +}emac_tx_bd_t; + +/* EMAC RX Buffer descriptor data structure - Refer TRM for details about the buffer descriptor structure. */ +typedef struct emac_rx_bd { + volatile struct emac_rx_bd *next; /*Used as a pointer for next element in the linked list of descriptors.*/ + volatile uint32 bufptr; /*Pointer to the actual Buffer which will store the received data.*/ + volatile uint32 bufoff_len; /*Buffer Offset and Buffer Length (16 bits each)*/ + volatile uint32 flags_pktlen; /*Status flags and Packet Length. (16 bits each)*/ +}emac_rx_bd_t; + +/** + * Helper struct to hold the data used to operate on a particular + * receive channel + */ +typedef struct rxch_struct { + volatile emac_rx_bd_t *free_head; /*Used to point to the free buffer descriptor which can receive new data.*/ + volatile emac_rx_bd_t *active_head; /*Used to point to the active descriptor in the chain which is receiving.*/ + volatile emac_rx_bd_t *active_tail; /*Used to point to the last descriptor in the chain.*/ +}rxch_t; + +/** + * Helper struct to hold the data used to operate on a particular + * transmit channel + */ +typedef struct txch_struct { + volatile emac_tx_bd_t *free_head; /*Used to point to the free buffer descriptor which can transmit new data.*/ + volatile emac_tx_bd_t *active_tail; /*Used to point to the last descriptor in the chain.*/ + volatile emac_tx_bd_t *next_bd_to_process; /*Used to point to the next descriptor in the chain to be processed.*/ +}txch_t; +/** + * Helper struct to hold private data used to operate the ethernet interface. + */ +typedef struct hdkif_struct { + /* MAC Address of the Module. */ + uint8_t mac_addr[6]; + + /* emac base address */ + uint32 emac_base; + + /* emac controller base address */ + volatile uint32 emac_ctrl_base; + volatile uint32 emac_ctrl_ram; + + /* mdio base address */ + volatile uint32 mdio_base; + + /* phy parameters for this instance - for future use */ + uint32 phy_addr; + boolean (*phy_autoneg)(uint32 param1, uint32 param2, uint16 param3); + boolean (*phy_partnerability)(uint32 param4, uint32 param5, uint16* param6); + + /* The tx/rx channels for the interface */ + txch_t txchptr; + rxch_t rxchptr; +}hdkif_t; + +/*Ethernet Frame Structure */ +typedef struct ethernet_frame +{ + uint8 dest_addr[6]; /* Destination MAC Address */ + uint8 src_addr[6]; /*Source MAC Address. */ + uint16 frame_length; /* Data Frame Length */ + uint8 data[1500]; /* Data */ +}ethernet_frame_t; + +/* Struct used to take packet data input from the user for transmit APIs. */ +typedef struct pbuf_struct { + /** next pbuf in singly linked pbuf chain */ + struct pbuf_struct *next; + + /** + * Pointer to the actual ethernet packet/packet fragment to be transmitted. + * The packet needs to be in the following format: + * |Destination MAC Address (6 bytes)| Source MAC Address (6 bytes)| Length/Type (2 bytes)| Data (46- 1500 bytes) + * The data can be split up over multiple pbufs which are linked as a linked list. + **/ + uint8 *payload; + + /** + * total length of this buffer and all next buffers in chain + * belonging to the same packet. + * + * For non-queue packet chains this is the invariant: + * p->tot_len == p->len + (p->next? p->next->tot_len: 0) + */ + uint16 tot_len; + + /** length of this buffer */ + uint16 len; + +}pbuf_t; + +/* Structure to hold the values of the EMAC Configuration Registers. */ +typedef struct emac_config_reg_struct { +/* EMAC Module Register Values */ +uint32 TXCONTROL; /* Transmit Control Register. */ +uint32 RXCONTROL; /* Receive Control Register */ +uint32 TXINTMASKSET; /* Transmit Interrupt Mask Set Register */ +uint32 TXINTMASKCLEAR; /* Transmit Interrupt Clear Register */ +uint32 RXINTMASKSET; /* Receive Interrupt Mask Set Register */ +uint32 RXINTMASKCLEAR; /*Receive Interrupt Mask Clear Register*/ +uint32 MACSRCADDRHI; /*MAC Source Address High Bytes Register*/ +uint32 MACSRCADDRLO; /*MAC Source Address Low Bytes Register*/ + +/*MDIO Module Registers */ +uint32 MDIOCONTROL; /*MDIO Control Register. */ + +/* EMAC Control Module Registers */ +uint32 C0RXEN; /*EMAC Control Module Receive Interrupt Enable Register*/ +uint32 C0TXEN; /*EMAC Control Module Transmit Interrupt Enable Register*/ +}emac_config_reg_t; +/*****************************************************************************/ +/** + * @defgroup EMACMDIO EMAC/MDIO + * @brief Ethernet Media Access Controller/Management Data Input/Output. + * + * The EMAC controls the flow of packet data from the system to the PHY. The MDIO module controls PHY + * configuration and status monitoring. + * + * Both the EMAC and the MDIO modules interface to the system core through a custom interface that + * allows efficient data transmission and reception. This custom interface is referred to as the EMAC control + * module and is considered integral to the EMAC/MDIO peripheral + * + * Related Files + * - emac.h + * - emac.c + * - hw_emac.h + * - hw_emac_ctrl.h + * - hw_mdio.h + * - hw_reg_access.h + * - mdio.h + * - mdio.c + * @addtogroup EMACMDIO + * @{ + */ +/* +** Prototypes for the APIs +*/ +extern uint32 EMACLinkSetup(hdkif_t *hdkif); +extern void EMACInstConfig(hdkif_t *hdkif); +extern void EMACTxIntPulseEnable(uint32 emacBase, uint32 emacCtrlBase, + uint32 ctrlCore, uint32 channel); +extern void EMACTxIntPulseDisable(uint32 emacBase, uint32 emacCtrlBase, + uint32 ctrlCore, uint32 channel); +extern void EMACRxIntPulseEnable(uint32 emacBase, uint32 emacCtrlBase, + uint32 ctrlCore, uint32 channel); +extern void EMACRxIntPulseDisable(uint32 emacBase, uint32 emacCtrlBase, + uint32 ctrlCore, uint32 channel); +extern void EMACRMIISpeedSet(uint32 emacBase, uint32 speed); +extern void EMACDuplexSet(uint32 emacBase, uint32 duplexMode); +extern void EMACTxEnable(uint32 emacBase); +extern void EMACTxDisable(uint32 emacBase); +extern void EMACRxEnable(uint32 emacBase); +extern void EMACRxDisable(uint32 emacBase); +extern void EMACTxHdrDescPtrWrite(uint32 emacBase, uint32 descHdr, + uint32 channel); +extern void EMACRxHdrDescPtrWrite(uint32 emacBase, uint32 descHdr, + uint32 channel); +extern void EMACInit(uint32 emacCtrlBase, uint32 emacBase); +extern void EMACMACSrcAddrSet(uint32 emacBase, uint8 macAddr[6]); +extern void EMACMACAddrSet(uint32 emacBase, uint32 channel, + uint8 macAddr[6], uint32 matchFilt); +extern void EMACMIIEnable(uint32 emacBase); +extern void EMACMIIDisable(uint32 emacBase); +extern void EMACRxUnicastSet(uint32 emacBase, uint32 channel); +extern void EMACRxUnicastClear(uint32 emacBase, uint32 channel); +extern void EMACCoreIntAck(uint32 emacBase, uint32 eoiFlag); +extern void EMACTxCPWrite(uint32 emacBase, uint32 channel, + uint32 comPtr); +extern void EMACRxCPWrite(uint32 emacBase, uint32 channel, + uint32 comPtr); +extern void EMACRxBroadCastEnable(uint32 emacBase, uint32 channel); +extern void EMACRxBroadCastDisable(uint32 emacBase, uint32 channel); +extern void EMACRxMultiCastEnable(uint32 emacBase, uint32 channel); +extern void EMACRxMultiCastDisable(uint32 emacBase, uint32 channel); +extern void EMACNumFreeBufSet(uint32 emacBase, uint32 channel, + uint32 nBuf); +extern uint32 EMACIntVectorGet(uint32 emacBase); +uint32 EMACHWInit(uint8_t macaddr[6U]); +void EMACTxTeardown(uint32 emacBase, uint32 channel); +void EMACRxTeardown(uint32 emacBase, uint32 channel); +void EMACFrameSelect(uint32 emacBase, uint64 hashTable); +void EMACTxPrioritySelect(uint32 emacBase, uint32 txPType); +void EMACSoftReset(uint32 emacCtrlBase, uint32 emacBase); +void EMACEnableIdleState(uint32 emacBase); +void EMACDisableIdleState(uint32 emacBase); +void EMACEnableLoopback(uint32 emacBase); +void EMACDisableLoopback(uint32 emacBase); +void EMACTxFlowControlEnable(uint32 emacBase); +void EMACTxFlowControlDisable(uint32 emacBase); +void EMACRxFlowControlEnable(uint32 emacBase); +void EMACRxFlowControlDisable(uint32 emacBase); +void EMACRxSetFlowThreshold(uint32 emacBase, uint32 channel, uint32 threshold); +uint32 EMACReadNetStatRegisters(uint32 emacBase, uint32 statRegNo); +void EMACDMAInit(hdkif_t *hdkif); +boolean EMACTransmit(hdkif_t *hdkif, pbuf_t *pbuf); +void EMACTxIntHandler(hdkif_t *hdkif); +void EMACReceive(hdkif_t *hdkif); +/* Notification Function to which received packets are passed after processing */ +void emacTxNotification(hdkif_t *hdkif); +void emacRxNotification(hdkif_t *hdkif); +void EMACTxIntStat(uint32 emacBase, uint32 channel, emac_tx_int_status_t *txintstat); +void EMACRxIntStat(uint32 emacBase, uint32 channel, emac_rx_int_status_t *rxintstat); +void EMACGetConfigValue(emac_config_reg_t *config_reg, config_value_type_t type); + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +#ifdef __cplusplus +} +#endif + +/**@}*/ +#endif /* __EMAC_H__ */ diff --git a/include/arch/rm46l8lp/halcogen/eqep.h b/include/arch/rm46l8lp/halcogen/eqep.h new file mode 100644 index 0000000..63d1637 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/eqep.h @@ -0,0 +1,716 @@ +/** @file eqep.h +* @brief EQEP Driver Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __eQEP_H__ +#define __eQEP_H__ + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +#include "reg_eqep.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/*QDECCTL Register */ +#define eQEP_QDECCTL_QSRC ((uint16)((uint16)3U << 14U)) /* "Reason - TI_Fee_Fix is a symbolic constant."*/ +#define TI_FEE_FLASH_ERROR_CORRECTION_HANDLING TI_Fee_Fix +#else +/*SAFETYMCUSW 79 S MR:19.4 "Reason - TI_Fee_None is a symbolic constant."*/ +#define TI_FEE_FLASH_ERROR_CORRECTION_HANDLING TI_Fee_None +#endif + +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_MAXIMUM_BLOCKING_TIME is a symbolic constant"*/ +#define TI_FEE_MAXIMUM_BLOCKING_TIME FEE_MAXIMUM_BLOCKING_TIME +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_OPERATING_FREQUENCY is a symbolic constant."*/ +#define TI_FEE_OPERATING_FREQUENCY FEE_OPERATING_FREQUENCY +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_FLASH_ERROR_CORRECTION_ENABLE is a symbolic constant."*/ +#define TI_FEE_FLASH_ERROR_CORRECTION_ENABLE FEE_FLASH_ERROR_CORRECTION_ENABLE +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_FLASH_CHECKSUM_ENABLE is a symbolic constant."*/ +#define TI_FEE_FLASH_CHECKSUM_ENABLE FEE_FLASH_CHECKSUM_ENABLE +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_FLASH_WRITECOUNTER_SAVE is a symbolic constant."*/ +#define TI_FEE_FLASH_WRITECOUNTER_SAVE FEE_FLASH_WRITECOUNTER_SAVE +/*SAFETYMCUSW 79 S MR:19.4 "Reason - NVM_DATASET_SELECTION_BITS is a symbolic constant."*/ +#define TI_FEE_DATASELECT_BITS NVM_DATASET_SELECTION_BITS +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_NUMBER_OF_EEPS is a symbolic constant."*/ +#define TI_FEE_NUMBER_OF_EEPS FEE_NUMBER_OF_EEPS +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_INDEX is a symbolic constant."*/ +#define TI_FEE_INDEX FEE_INDEX +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_PAGE_OVERHEAD is a symbolic constant."*/ +#define TI_FEE_PAGE_OVERHEAD FEE_PAGE_OVERHEAD +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_BLOCK_OVERHEAD is a symbolic constant."*/ +#define TI_FEE_BLOCK_OVERHEAD FEE_BLOCK_OVERHEAD +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_VIRTUAL_PAGE_SIZE is a symbolic constant."*/ +#define TI_FEE_VIRTUAL_PAGE_SIZE FEE_VIRTUAL_PAGE_SIZE +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_VIRTUAL_SECTOR_OVERHEAD is a symbolic constant."*/ +#define TI_FEE_VIRTUAL_SECTOR_OVERHEAD FEE_VIRTUAL_SECTOR_OVERHEAD +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_NUMBER_OF_UNCONFIGUREDBLOCKSTOCOPY is a symbolic constant."*/ +#define TI_FEE_NUMBER_OF_UNCONFIGUREDBLOCKSTOCOPY FEE_NUMBER_OF_UNCONFIGUREDBLOCKSTOCOPY +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_NUMBER_OF_EIGHTBYTEWRITES is a symbolic constant."*/ +#define TI_FEE_NUMBER_OF_EIGHTBYTEWRITES FEE_NUMBER_OF_EIGHTBYTEWRITES +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_NVM_JOB_END_NOTIFICATION is a symbolic constant."*/ +#define TI_FEE_NVM_JOB_END_NOTIFICATION FEE_NVM_JOB_END_NOTIFICATION +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_NVM_JOB_ERROR_NOTIFICATION is a symbolic constant."*/ +#define TI_FEE_NVM_JOB_ERROR_NOTIFICATION FEE_NVM_JOB_ERROR_NOTIFICATION +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_POLLING_MODE is a symbolic constant."*/ +#define TI_FEE_POLLING_MODE FEE_POLLING_MODE +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_CHECK_BANK7_ACCESS is a symbolic constant."*/ +#ifndef FEE_CHECK_BANK7_ACCESS +#define TI_FEE_CHECK_BANK7_ACCESS STD_ON +#else +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_CHECK_BANK7_ACCESS is a symbolic constant."*/ +#define TI_FEE_CHECK_BANK7_ACCESS STD_ON +#endif +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_TOTAL_BLOCKS_DATASETS is a symbolic constant."*/ +#define TI_FEE_TOTAL_BLOCKS_DATASETS FEE_TOTAL_BLOCKS_DATASETS +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_VIRTUALSECTOR_SIZE is a symbolic constant."*/ +#define TI_FEE_VIRTUALSECTOR_SIZE FEE_VIRTUALSECTOR_SIZE +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_PHYSICALSECTOR_SIZE is a symbolic constant."*/ +#define TI_FEE_PHYSICALSECTOR_SIZE FEE_PHYSICALSECTOR_SIZE +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_GENERATE_DEVICEANDVIRTUALSECTORSTRUC is a symbolic constant."*/ +#define TI_FEE_GENERATE_DEVICEANDVIRTUALSECTORSTRUC FEE_GENERATE_DEVICEANDVIRTUALSECTORSTRUC +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_USEPARTIALERASEDSECTOR is a symbolic constant."*/ +#define TI_FEE_USEPARTIALERASEDSECTOR FEE_USEPARTIALERASEDSECTOR + +/*----------------------------------------------------------------------------*/ +/* Virtual Sector Configuration */ + +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_NUMBER_OF_VIRTUAL_SECTORS is a symbolic constant."*/ +/*SAFETYMCUSW 61 X MR:1.4,5.1 "Reason - Similar Identifier name is required here."*/ +#define TI_FEE_NUMBER_OF_VIRTUAL_SECTORS FEE_NUMBER_OF_VIRTUAL_SECTORS +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_NUMBER_OF_VIRTUAL_SECTORS_EEP1 is a symbolic constant."*/ +/*SAFETYMCUSW 384 S MR:1.4,5.1 "Reason - Similar Identifier name is required here."*/ +/*SAFETYMCUSW 61 X MR:1.4,5.1 "Reason - Similar Identifier name is required here."*/ +#define TI_FEE_NUMBER_OF_VIRTUAL_SECTORS_EEP1 FEE_NUMBER_OF_VIRTUAL_SECTORS_EEP1 + + +/*----------------------------------------------------------------------------*/ +/* Block Configuration */ +/*SAFETYMCUSW 79 S MR:19.4 "Reason - FEE_NUMBER_OF_BLOCKS is a symbolic constant."*/ +#define TI_FEE_NUMBER_OF_BLOCKS FEE_NUMBER_OF_BLOCKS +/*SAFETYMCUSW 79 S MR:19.4 "Reason - TI_FEE_VARIABLE_DATASETS is a symbolic constant."*/ +#define TI_FEE_VARIABLE_DATASETS STD_ON + + +#endif /* TI_FEE_DRIVER */ + +#endif /* FEE_INTERFACE_H */ +/********************************************************************************************************************** + * END OF FILE: fee_interface.h + *********************************************************************************************************************/ diff --git a/include/arch/rm46l8lp/halcogen/gio.h b/include/arch/rm46l8lp/halcogen/gio.h new file mode 100644 index 0000000..4b33e2b --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/gio.h @@ -0,0 +1,174 @@ +/** @file gio.h +* @brief GIO Driver Definition File +* @date 11-Dec-2018 +* @version 04.07.01 +* +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __GIO_H__ +#define __GIO_H__ + +#include "reg_gio.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +typedef struct gio_config_reg +{ + uint32 CONFIG_INTDET; + uint32 CONFIG_POL; + uint32 CONFIG_INTENASET; + uint32 CONFIG_LVLSET; + + uint32 CONFIG_PORTADIR; + uint32 CONFIG_PORTAPDR; + uint32 CONFIG_PORTAPSL; + uint32 CONFIG_PORTAPULDIS; + + uint32 CONFIG_PORTBDIR; + uint32 CONFIG_PORTBPDR; + uint32 CONFIG_PORTBPSL; + uint32 CONFIG_PORTBPULDIS; +}gio_config_reg_t; + +#define GIO_INTDET_CONFIGVALUE 0U +#define GIO_POL_CONFIGVALUE ((uint32)((uint32)0U << 0U) \ + | (uint32)((uint32)0U << 1U) \ + | (uint32)((uint32)0U << 2U) \ + | (uint32)((uint32)0U << 3U) \ + | (uint32)((uint32)0U << 4U) \ + | (uint32)((uint32)0U << 5U) \ + | (uint32)((uint32)0U << 6U) \ + | (uint32)((uint32)0U << 7U) \ + | (uint32)((uint32)0U << 8U) \ + | (uint32)((uint32)0U << 9U) \ + | (uint32)((uint32)0U << 10U)\ + | (uint32)((uint32)0U << 11U)\ + | (uint32)((uint32)0U << 12U)\ + | (uint32)((uint32)0U << 13U)\ + | (uint32)((uint32)0U << 14U)\ + | (uint32)((uint32)0U << 15U)) + + +#define GIO_INTENASET_CONFIGVALUE ((uint32)((uint32)0U << 0U) \ + | (uint32)((uint32)0U << 1U) \ + | (uint32)((uint32)0U << 2U) \ + | (uint32)((uint32)0U << 3U) \ + | (uint32)((uint32)0U << 4U) \ + | (uint32)((uint32)0U << 5U) \ + | (uint32)((uint32)0U << 6U) \ + | (uint32)((uint32)0U << 7U) \ + | (uint32)((uint32)0U << 8U) \ + | (uint32)((uint32)0U << 9U) \ + | (uint32)((uint32)0U << 10U)\ + | (uint32)((uint32)0U << 11U)\ + | (uint32)((uint32)0U << 12U)\ + | (uint32)((uint32)0U << 13U)\ + | (uint32)((uint32)0U << 14U)\ + | (uint32)((uint32)0U << 15U)) + +#define GIO_LVLSET_CONFIGVALUE ((uint32)((uint32)0U << 0U) \ + | (uint32)((uint32)0U << 1U) \ + | (uint32)((uint32)0U << 2U) \ + | (uint32)((uint32)0U << 3U) \ + | (uint32)((uint32)0U << 4U) \ + | (uint32)((uint32)0U << 5U) \ + | (uint32)((uint32)0U << 6U) \ + | (uint32)((uint32)0U << 7U) \ + | (uint32)((uint32)0U << 8U) \ + | (uint32)((uint32)0U << 9U) \ + | (uint32)((uint32)0U << 10U)\ + | (uint32)((uint32)0U << 11U)\ + | (uint32)((uint32)0U << 12U)\ + | (uint32)((uint32)0U << 13U)\ + | (uint32)((uint32)0U << 14U)\ + | (uint32)((uint32)0U << 15U)) + +#define GIO_PORTADIR_CONFIGVALUE ((uint32)((uint32)1U << 0U) | (uint32)((uint32)1U << 1U) | (uint32)((uint32)1U << 2U) | (uint32)((uint32)0U << 3U) | (uint32)((uint32)0U << 4U) | (uint32)((uint32)0U << 5U) | (uint32)((uint32)0U << 6U) | (uint32)((uint32)0U << 7U)) +#define GIO_PORTAPDR_CONFIGVALUE ((uint32)((uint32)0U << 0U) | (uint32)((uint32)0U << 1U) | (uint32)((uint32)0U << 2U) | (uint32)((uint32)0U << 3U) | (uint32)((uint32)0U << 4U) | (uint32)((uint32)0U << 5U) | (uint32)((uint32)0U << 6U) | (uint32)((uint32)0U << 7U)) +#define GIO_PORTAPSL_CONFIGVALUE ((uint32)((uint32)0U << 0U) | (uint32)((uint32)0U << 1U) | (uint32)((uint32)0U << 2U) | (uint32)((uint32)0U << 3U) | (uint32)((uint32)0U << 4U) | (uint32)((uint32)0U << 5U) | (uint32)((uint32)0U << 6U) | (uint32)((uint32)0U << 7U)) +#define GIO_PORTAPULDIS_CONFIGVALUE ((uint32)((uint32)0U << 0U) | (uint32)((uint32)0U << 1U) | (uint32)((uint32)0U << 2U) |(uint32)((uint32)0U << 3U) | (uint32)((uint32)0U << 4U) | (uint32)((uint32)0U << 5U) | (uint32)((uint32)0U << 6U) | (uint32)((uint32)0U << 7U)) + +#define GIO_PORTBDIR_CONFIGVALUE ((uint32)((uint32)0U << 0U) | (uint32)((uint32)1U << 1U) | (uint32)((uint32)1U << 2U) | (uint32)((uint32)0U << 3U) | (uint32)((uint32)0U << 4U) | (uint32)((uint32)0U << 5U) | (uint32)((uint32)0U << 6U) | (uint32)((uint32)0U << 7U)) +#define GIO_PORTBPDR_CONFIGVALUE ((uint32)((uint32)0U << 0U) | (uint32)((uint32)0U << 1U) | (uint32)((uint32)0U << 2U) | (uint32)((uint32)0U << 3U) | (uint32)((uint32)0U << 4U) | (uint32)((uint32)0U << 5U) | (uint32)((uint32)0U << 6U) | (uint32)((uint32)0U << 7U)) +#define GIO_PORTBPSL_CONFIGVALUE ((uint32)((uint32)0U << 0U) | (uint32)((uint32)0U << 1U) | (uint32)((uint32)0U << 2U) | (uint32)((uint32)0U << 3U) | (uint32)((uint32)0U << 4U) | (uint32)((uint32)0U << 5U) | (uint32)((uint32)0U << 6U) | (uint32)((uint32)0U << 7U)) +#define GIO_PORTBPULDIS_CONFIGVALUE ((uint32)((uint32)0U << 0U) | (uint32)((uint32)0U << 1U) | (uint32)((uint32)0U << 2U) |(uint32)((uint32)0U << 3U) | (uint32)((uint32)0U << 4U) | (uint32)((uint32)0U << 5U) | (uint32)((uint32)0U << 6U) | (uint32)((uint32)0U << 7U)) + + +/** + * @defgroup GIO GIO + * @brief General-Purpose Input/Output Module. + * + * The GIO module provides the family of devices with input/output (I/O) capability. + * The I/O pins are bidirectional and bit-programmable. + * The GIO module also supports external interrupt capability. + * + * Related Files + * - reg_gio.h + * - gio.h + * - gio.c + * @addtogroup GIO + * @{ + */ + +/* GIO Interface Functions */ +void gioInit(void); +void gioSetDirection(gioPORT_t *port, uint32 dir); +void gioSetBit(gioPORT_t *port, uint32 bit, uint32 value); +void gioSetPort(gioPORT_t *port, uint32 value); +uint32 gioGetBit(gioPORT_t *port, uint32 bit); +uint32 gioGetPort(gioPORT_t *port); +void gioToggleBit(gioPORT_t *port, uint32 bit); +void gioEnableNotification(gioPORT_t *port, uint32 bit); +void gioDisableNotification(gioPORT_t *port, uint32 bit); +void gioNotification(gioPORT_t *port, uint32 bit); +void gioGetConfigValue(gio_config_reg_t *config_reg, config_value_type_t type); + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/**@}*/ +#ifdef __cplusplus +} +#endif /*extern "C" */ + +#endif diff --git a/include/arch/rm46l8lp/halcogen/hal_stdtypes.h b/include/arch/rm46l8lp/halcogen/hal_stdtypes.h new file mode 100644 index 0000000..f3189ff --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/hal_stdtypes.h @@ -0,0 +1,196 @@ +/** @file hal_stdtypes.h +* @brief HALCoGen standard types header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Type and Global definitions which are relevant for all drivers. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __HAL_STDTYPES_H__ +#define __HAL_STDTYPES_H__ + +#include +#include + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ +/************************************************************/ +/* Type Definitions */ +/************************************************************/ +#ifndef _UINT64_DECLARED +typedef uint64_t uint64; +#define _UINT64_DECLARED +#endif + +#ifndef _UINT32_DECLARED +typedef uint32_t uint32; +#define _UINT32_DECLARED +#endif + +#ifndef _UINT16_DECLARED +typedef uint16_t uint16; +#define _UINT16_DECLARED +#endif + +#ifndef _UINT8_DECLARED +typedef uint8_t uint8; +#define _UINT8_DECLARED +#endif + +#ifndef _BOOLEAN_DECLARED +#ifdef __cplusplus +typedef bool boolean; +#else +typedef _Bool boolean; +#endif +#define _BOOLEAN_DECLARED +#endif + +#ifndef _SINT64_DECLARED +typedef int64_t sint64; +#define _SINT64_DECLARED +#endif + +#ifndef _SINT32_DECLARED +typedef int32_t sint32; +#define _SINT32_DECLARED +#endif + +#ifndef _SINT16_DECLARED +typedef int16_t sint16; +#define _SINT16_DECLARED +#endif + +#ifndef _SINT8_DECLARED +typedef int8_t sint8; +#define _SINT8_DECLARED +#endif + +#ifndef _FLOAT32_DECLARED +typedef float float32; +#define _FLOAT32_DECLARED +#endif + +#ifndef _FLOAT64_DECLARED +typedef double float64; +#define _FLOAT64_DECLARED +#endif + + +typedef uint8 Std_ReturnType; + +typedef struct +{ + uint16 vendorID; + uint16 moduleID; + uint8 instanceID; + uint8 sw_major_version; + uint8 sw_minor_version; + uint8 sw_patch_version; +} Std_VersionInfoType; + +/*****************************************************************************/ +/* SYMBOL DEFINITIONS */ +/*****************************************************************************/ +#ifndef STATUSTYPEDEFINED + #define STATUSTYPEDEFINED + #define E_OK 0x00U + + typedef unsigned char StatusType; +#endif + +#ifndef E_NOT_OK +#define E_NOT_OK 0x01U +#endif + +#ifndef STD_ON +#define STD_ON 0x01U +#endif + +#ifndef STD_OFF +#define STD_OFF 0x00U +#endif + + +/************************************************************/ +/* Global Definitions */ +/************************************************************/ +/** @def NULL +* @brief NULL definition +*/ + +#ifndef NULL + /*SAFETYMCUSW 218 S MR:20.2 "Custom Type Definition." */ + #define NULL ((void *) 0U) +#endif + +/*****************************************************************************/ +/* Define: NULL_PTR */ +/* Description: Void pointer to 0 */ +/*****************************************************************************/ +#ifndef NULL_PTR + #define NULL_PTR ((void *)0x0) +#endif + +/** @def TRUE +* @brief definition for TRUE +*/ +#ifndef TRUE + #define TRUE true +#endif + +/** @def FALSE +* @brief BOOLEAN definition for FALSE +*/ +#ifndef FALSE + #define FALSE false +#endif + +/*****************************************************************************/ +/* Define: NULL_PTR */ +/* Description: Void pointer to 0 */ +/*****************************************************************************/ +#ifndef NULL_PTR +#define NULL_PTR ((void *)0x0U) +#endif + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +#endif /* __HAL_STDTYPES_H__ */ diff --git a/include/arch/rm46l8lp/halcogen/het.h b/include/arch/rm46l8lp/halcogen/het.h new file mode 100644 index 0000000..68b1e0c --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/het.h @@ -0,0 +1,671 @@ +/** @file het.h +* @brief HET Driver Definition File +* @date 11-Dec-2018 +* @version 04.07.01 +* +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + + +#ifndef __HET_H__ +#define __HET_H__ + +#include "reg_het.h" +#include + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/** @def pwm0 +* @brief Pwm signal 0 +* +* Alias for pwm signal 0 +*/ +#define pwm0 0U + +/** @def pwm1 +* @brief Pwm signal 1 +* +* Alias for pwm signal 1 +*/ +#define pwm1 1U + +/** @def pwm2 +* @brief Pwm signal 2 +* +* Alias for pwm signal 2 +*/ +#define pwm2 2U + +/** @def pwm3 +* @brief Pwm signal 3 +* +* Alias for pwm signal 3 +*/ +#define pwm3 3U + +/** @def pwm4 +* @brief Pwm signal 4 +* +* Alias for pwm signal 4 +*/ +#define pwm4 4U + +/** @def pwm5 +* @brief Pwm signal 5 +* +* Alias for pwm signal 5 +*/ +#define pwm5 5U + +/** @def pwm6 +* @brief Pwm signal 6 +* +* Alias for pwm signal 6 +*/ +#define pwm6 6U + +/** @def pwm7 +* @brief Pwm signal 7 +* +* Alias for pwm signal 7 +*/ +#define pwm7 7U + + +/** @def edge0 +* @brief Edge signal 0 +* +* Alias for edge signal 0 +*/ +#define edge0 0U + +/** @def edge1 +* @brief Edge signal 1 +* +* Alias for edge signal 1 +*/ +#define edge1 1U + +/** @def edge2 +* @brief Edge signal 2 +* +* Alias for edge signal 2 +*/ +#define edge2 2U + +/** @def edge3 +* @brief Edge signal 3 +* +* Alias for edge signal 3 +*/ +#define edge3 3U + +/** @def edge4 +* @brief Edge signal 4 +* +* Alias for edge signal 4 +*/ +#define edge4 4U + +/** @def edge5 +* @brief Edge signal 5 +* +* Alias for edge signal 5 +*/ +#define edge5 5U + +/** @def edge6 +* @brief Edge signal 6 +* +* Alias for edge signal 6 +*/ +#define edge6 6U + +/** @def edge7 +* @brief Edge signal 7 +* +* Alias for edge signal 7 +*/ +#define edge7 7U + + +/** @def cap0 +* @brief Capture signal 0 +* +* Alias for capture signal 0 +*/ +#define cap0 0U + +/** @def cap1 +* @brief Capture signal 1 +* +* Alias for capture signal 1 +*/ +#define cap1 1U + +/** @def cap2 +* @brief Capture signal 2 +* +* Alias for capture signal 2 +*/ +#define cap2 2U + +/** @def cap3 +* @brief Capture signal 3 +* +* Alias for capture signal 3 +*/ +#define cap3 3U + +/** @def cap4 +* @brief Capture signal 4 +* +* Alias for capture signal 4 +*/ +#define cap4 4U + +/** @def cap5 +* @brief Capture signal 5 +* +* Alias for capture signal 5 +*/ +#define cap5 5U + +/** @def cap6 +* @brief Capture signal 6 +* +* Alias for capture signal 6 +*/ +#define cap6 6U + +/** @def cap7 +* @brief Capture signal 7 +* +* Alias for capture signal 7 +*/ +#define cap7 7U + +/** @def pwmEND_OF_DUTY +* @brief Pwm end of duty +* +* Alias for pwm end of duty notification +*/ +#define pwmEND_OF_DUTY 2U + +/** @def pwmEND_OF_PERIOD +* @brief Pwm end of period +* +* Alias for pwm end of period notification +*/ +#define pwmEND_OF_PERIOD 4U + +/** @def pwmEND_OF_BOTH +* @brief Pwm end of duty and period +* +* Alias for pwm end of duty and period notification +*/ +#define pwmEND_OF_BOTH 6U + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/** @struct hetBase +* @brief HET Register Definition +* +* This structure is used to access the HET module registers. +*/ +/** @typedef hetBASE_t +* @brief HET Register Frame Type Definition +* +* This type is used to access the HET Registers. +*/ + +enum hetPinSelect +{ + PIN_HET_0 = 0U, + PIN_HET_1 = 1U, + PIN_HET_2 = 2U, + PIN_HET_3 = 3U, + PIN_HET_4 = 4U, + PIN_HET_5 = 5U, + PIN_HET_6 = 6U, + PIN_HET_7 = 7U, + PIN_HET_8 = 8U, + PIN_HET_9 = 9U, + PIN_HET_10 = 10U, + PIN_HET_11 = 11U, + PIN_HET_12 = 12U, + PIN_HET_13 = 13U, + PIN_HET_14 = 14U, + PIN_HET_15 = 15U, + PIN_HET_16 = 16U, + PIN_HET_17 = 17U, + PIN_HET_18 = 18U, + PIN_HET_19 = 19U, + PIN_HET_20 = 20U, + PIN_HET_21 = 21U, + PIN_HET_22 = 22U, + PIN_HET_23 = 23U, + PIN_HET_24 = 24U, + PIN_HET_25 = 25U, + PIN_HET_26 = 26U, + PIN_HET_27 = 27U, + PIN_HET_28 = 28U, + PIN_HET_29 = 29U, + PIN_HET_30 = 30U, + PIN_HET_31 = 31U +}; + + +/** @struct hetSignal +* @brief HET Signal Definition +* +* This structure is used to define a pwm signal. +*/ +/** @typedef hetSIGNAL_t +* @brief HET Signal Type Definition +* +* This type is used to access HET Signal Information. +*/ +typedef struct hetSignal +{ + uint32 duty; /**< Duty cycle in % of the period */ + float64 period; /**< Period in us */ +} hetSIGNAL_t; + + +/* Configuration registers */ +typedef struct het_config_reg +{ + uint32 CONFIG_GCR; + uint32 CONFIG_PFR; + uint32 CONFIG_INTENAS; + uint32 CONFIG_INTENAC; + uint32 CONFIG_PRY; + uint32 CONFIG_AND; + uint32 CONFIG_HRSH; + uint32 CONFIG_XOR; + uint32 CONFIG_DIR; + uint32 CONFIG_PDR; + uint32 CONFIG_PULDIS; + uint32 CONFIG_PSL; + uint32 CONFIG_PCR; +} het_config_reg_t; + +/* Configuration registers initial value for HET1*/ +#define HET1_DIR_CONFIGVALUE ((uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U) + +#define HET1_PDR_CONFIGVALUE ((uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00008000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U) + +#define HET1_PULDIS_CONFIGVALUE ((uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U) + +#define HET1_PSL_CONFIGVALUE ((uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00008000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U) + +#define HET1_HRSH_CONFIGVALUE ((uint32)0x00008000U \ + | (uint32)0x00004000U \ + | (uint32)0x00002000U \ + | (uint32)0x00001000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000008U \ + | (uint32)0x00000004U \ + | (uint32)0x00000002U \ + | (uint32)0x00000001U) + +#define HET1_AND_CONFIGVALUE ((uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U) + +#define HET1_XOR_CONFIGVALUE ((uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U) + +#define HET1_PFR_CONFIGVALUE (((uint32)6U << 8U) | (uint32)0U) + + +#define HET1_PRY_CONFIGVALUE ((uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U) + +#define HET1_INTENAC_CONFIGVALUE ((uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U) + +#define HET1_INTENAS_CONFIGVALUE ((uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U \ + | (uint32)0x00000000U) + +#define HET1_PCR_CONFIGVALUE ((uint32)0x00000005U) +#define HET1_GCR_CONFIGVALUE 0x00030001U + + + + +/** + * @defgroup HET HET + * @brief HighEnd Timer Module. + * + * The HET is a software-controlled timer with a dedicated specialized timer micromachine and a set of 30 instructions. + * The HET micromachine is connected to a port of up to 32 input/output (I/O) pins. + * + * Related Files + * - reg_het.h + * - het.h + * - het.c + * - reg_htu.h + * - htu.h + * - std_nhet.h + * @addtogroup HET + * @{ + */ + +/* HET Interface Functions */ +void hetInit(void); + +/* PWM Interface Functions */ +void pwmStart(hetRAMBASE_t * hetRAM,uint32 pwm); +void pwmStop(hetRAMBASE_t * hetRAM,uint32 pwm); +void pwmSetDuty(hetRAMBASE_t * hetRAM,uint32 pwm, uint32 pwmDuty); +void pwmSetSignal(hetRAMBASE_t * hetRAM,uint32 pwm, hetSIGNAL_t signal); +void pwmGetSignal(hetRAMBASE_t * hetRAM,uint32 pwm, hetSIGNAL_t *signal); +void pwmEnableNotification(hetBASE_t * hetREG,uint32 pwm, uint32 notification); +void pwmDisableNotification(hetBASE_t * hetREG,uint32 pwm, uint32 notification); +void pwmNotification(hetBASE_t * hetREG,uint32 pwm, uint32 notification); + +/* Edge Interface Functions */ +void edgeResetCounter(hetRAMBASE_t * hetRAM,uint32 edge); +uint32 edgeGetCounter(hetRAMBASE_t * hetRAM,uint32 edge); +void edgeEnableNotification(hetBASE_t * hetREG,uint32 edge); +void edgeDisableNotification(hetBASE_t * hetREG,uint32 edge); +void edgeNotification(hetBASE_t * hetREG,uint32 edge); + +/* Captured Signal Interface Functions */ +void capGetSignal(hetRAMBASE_t * hetRAM, uint32 cap, hetSIGNAL_t *signal); + +/* Timestamp Interface Functions */ +void hetResetTimestamp(hetRAMBASE_t * hetRAM); +uint32 hetGetTimestamp(hetRAMBASE_t * hetRAM); +void het1GetConfigValue(het_config_reg_t *config_reg, config_value_type_t type); + +/** @fn void hetNotification(hetBASE_t *het, uint32 offset) +* @brief het interrupt callback +* @param[in] het - Het module base address +* - hetREG1: HET1 module base address pointer +* - hetREG2: HET2 module base address pointer +* @param[in] offset - het interrupt offset / Source number +* +* @note This function has to be provide by the user. +* +* This is a interrupt callback that is provided by the application and is call upon +* an het interrupt. The parameter passed to the callback is a copy of the interrupt +* offset register which is used to decode the interrupt source. +*/ +void hetNotification(hetBASE_t *het, uint32 offset); + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +/**@}*/ +#ifdef __cplusplus +} +#endif /*extern "C" */ + +#endif diff --git a/include/arch/rm46l8lp/halcogen/htu.h b/include/arch/rm46l8lp/halcogen/htu.h new file mode 100644 index 0000000..e17deea --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/htu.h @@ -0,0 +1,71 @@ +/** @file htu.h +* @brief HTU Driver Definition File +* @date 11-Dec-2018 +* @version 04.07.01 +* +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + + +#ifndef __HTU_H__ +#define __HTU_H__ + +#include "reg_htu.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* HTU General Definitions */ + +#define HTU1PARLOC (*(volatile uint32 *)0xFF4E0200U) +#define HTU2PARLOC (*(volatile uint32 *)0xFF4C0200U) + +#define HTU1RAMLOC (*(volatile uint32 *)0xFF4E0000U) +#define HTU2RAMLOC (*(volatile uint32 *)0xFF4C0000U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +#ifdef __cplusplus +} +#endif /*extern "C" */ + +#endif diff --git a/include/arch/rm46l8lp/halcogen/hw_emac.h b/include/arch/rm46l8lp/halcogen/hw_emac.h new file mode 100644 index 0000000..438c479 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/hw_emac.h @@ -0,0 +1,1489 @@ +/* + * hw_emac1.h + */ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef _HW_EMAC_H_ +#define _HW_EMAC_H_ + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +#define EMAC_BASE (0xFCF78000U) +#define EMAC_CTRL_BASE (0xFCF78800U) +#define EMAC_CTRL_RAM_BASE (0xFC520000U) + +#define EMAC_TXREVID (0x0U) +#define EMAC_TXCONTROL (0x4U) +#define EMAC_TXTEARDOWN (0x8U) +#define EMAC_RXREVID (0x10U) +#define EMAC_RXCONTROL (0x14U) +#define EMAC_RXTEARDOWN (0x18U) +#define EMAC_TXINTSTATRAW (0x80U) +#define EMAC_TXINTSTATMASKED (0x84U) +#define EMAC_TXINTMASKSET (0x88U) +#define EMAC_TXINTMASKCLEAR (0x8CU) +#define EMAC_MACINVECTOR (0x90U) +#define EMAC_MACEOIVECTOR (0x94U) +#define EMAC_RXINTSTATRAW (0xA0U) +#define EMAC_RXINTSTATMASKED (0xA4U) +#define EMAC_RXINTMASKSET (0xA8U) +#define EMAC_RXINTMASKCLEAR (0xACU) +#define EMAC_MACINTSTATRAW (0xB0U) +#define EMAC_MACINTSTATMASKED (0xB4U) +#define EMAC_MACINTMASKSET (0xB8U) +#define EMAC_MACINTMASKCLEAR (0xBCU) +#define EMAC_RXMBPENABLE (0x100U) +#define EMAC_RXUNICASTSET (0x104U) +#define EMAC_RXUNICASTCLEAR (0x108U) +#define EMAC_RXMAXLEN (0x10CU) +#define EMAC_RXBUFFEROFFSET (0x110U) +#define EMAC_RXFILTERLOWTHRESH (0x114U) +#define EMAC_RXFLOWTHRESH(n) ((uint32)0x120U + (uint32)((n) * 4U)) +#define EMAC_RXFREEBUFFER(n) ((uint32)0x140U + (uint32)((n) * 4U)) +#define EMAC_MACCONTROL (0x160U) +#define EMAC_MACSTATUS (0x164U) +#define EMAC_EMCONTROL (0x168U) +#define EMAC_FIFOCONTROL (0x16CU) +#define EMAC_MACCONFIG (0x170U) +#define EMAC_SOFTRESET (0x174U) +#define EMAC_MACSRCADDRLO (0x1D0U) +#define EMAC_MACSRCADDRHI (0x1D4U) +#define EMAC_MACHASH1 (0x1D8U) +#define EMAC_MACHASH2 (0x1DCU) +#define EMAC_BOFFTEST (0x1E0U) +#define EMAC_TPACETEST (0x1E4U) +#define EMAC_RXPAUSE (0x1E8U) +#define EMAC_TXPAUSE (0x1ECU) +#define EMAC_RXGOODFRAMES (0x200U) +#define EMAC_RXBCASTFRAMES (0x204U) +#define EMAC_RXMCASTFRAMES (0x208U) +#define EMAC_RXPAUSEFRAMES (0x20CU) +#define EMAC_RXCRCERRORS (0x210U) +#define EMAC_RXALIGNCODEERRORS (0x214U) +#define EMAC_RXOVERSIZED (0x218U) +#define EMAC_RXJABBER (0x21CU) +#define EMAC_RXUNDERSIZED (0x220U) +#define EMAC_RXFRAGMENTS (0x224U) +#define EMAC_RXFILTERED (0x228U) +#define EMAC_RXQOSFILTERED (0x22CU) +#define EMAC_RXOCTETS (0x230U) +#define EMAC_TXGOODFRAMES (0x234U) +#define EMAC_TXBCASTFRAMES (0x238U) +#define EMAC_TXMCASTFRAMES (0x23CU) +#define EMAC_TXPAUSEFRAMES (0x240U) +#define EMAC_TXDEFERRED (0x244U) +#define EMAC_TXCOLLISION (0x248U) +#define EMAC_TXSINGLECOLL (0x24CU) +#define EMAC_TXMULTICOLL (0x250U) +#define EMAC_TXEXCESSIVECOLL (0x254U) +#define EMAC_TXLATECOLL (0x258U) +#define EMAC_TXUNDERRUN (0x25CU) +#define EMAC_TXCARRIERSENSE (0x260U) +#define EMAC_TXOCTETS (0x264U) +#define EMAC_FRAME64 (0x268U) +#define EMAC_FRAME65T127 (0x26CU) +#define EMAC_FRAME128T255 (0x270U) +#define EMAC_FRAME256T511 (0x274U) +#define EMAC_FRAME512T1023 (0x278U) +#define EMAC_FRAME1024TUP (0x27CU) +#define EMAC_NETOCTETS (0x208U) +#define EMAC_RXSOFOVERRUNS (0x284U) +#define EMAC_RXMOFOVERRUNS (0x288U) +#define EMAC_RXDMAOVERRUNS (0x28CU) +#define EMAC_MACADDRLO (0x500U) +#define EMAC_MACADDRHI (0x504U) +#define EMAC_MACINDEX (0x508U) +#define EMAC_TXHDP(n) ((uint32)0x600U + (uint32)((n) * 4U)) +#define EMAC_RXHDP(n) ((uint32)0x620U + (uint32)((n) * 4U)) +#define EMAC_TXCP(n) ((uint32)0x640U + (uint32)((n) * 4U)) +#define EMAC_RXCP(n) ((uint32)0x660U + (uint32)((n) * 4U)) + +/**************************************************************************\ +* Field Definition Macros +\**************************************************************************/ + +/* TXREVID */ + +#define EMAC_TXREVID_TXREV (0xFFFFFFFFU) +#define EMAC_TXREVID_TXREV_SHIFT (0x00000000U) + + +/* TXCONTROL */ + + +#define EMAC_TXCONTROL_TXEN (0x00000001U) +#define EMAC_TXCONTROL_TXEN_SHIFT (0x00000000U) +#define EMAC_TXCONTROL_TXDIS (0x00000000U) + + +/* TXTEARDOWN */ + +#define EMAC_TXTEARDOWN_TXTDNCH (0x00000007U) +#define EMAC_TXTEARDOWN_TXTDNCH_SHIFT (0x00000000U) +#define EMAC_TXTEARDOWN_TXTDNCH_CHA0 (0x00000000U) +#define EMAC_TXTEARDOWN_TXTDNCH_CHA1 (0x00000001U) +#define EMAC_TXTEARDOWN_TXTDNCH_CHA2 (0x00000002U) +#define EMAC_TXTEARDOWN_TXTDNCH_CHA3 (0x00000003U) +#define EMAC_TXTEARDOWN_TXTDNCH_CHA4 (0x00000004U) +#define EMAC_TXTEARDOWN_TXTDNCH_CHA5 (0x00000005U) +#define EMAC_TXTEARDOWN_TXTDNCH_CHA6 (0x00000006U) +#define EMAC_TXTEARDOWN_TXTDNCH_CHA7 (0x00000007U) + + +/* RXREVID */ + +#define EMAC_RXREVID_RXREV (0xFFFFFFFFU) +#define EMAC_RXREVID_RXREV_SHIFT (0x00000000U) + + +/* RXCONTROL */ + + +#define EMAC_RXCONTROL_RXEN (0x00000001U) +#define EMAC_RXCONTROL_RXEN_SHIFT (0x00000000U) +#define EMAC_RXCONTROL_RXDIS (0x00000000U) + +/* RXTEARDOWN */ + + + +#define EMAC_RXTEARDOWN_RXTDNCH (0x00000007U) +#define EMAC_RXTEARDOWN_RXTDNCH_SHIFT (0x00000000U) +#define EMAC_RXTEARDOWN_RXTDNCH_CHA0 (0x00000000U) +#define EMAC_RXTEARDOWN_RXTDNCH_CHA1 (0x00000001U) +#define EMAC_RXTEARDOWN_RXTDNCH_CHA2 (0x00000002U) +#define EMAC_RXTEARDOWN_RXTDNCH_CHA3 (0x00000003U) +#define EMAC_RXTEARDOWN_RXTDNCH_CHA4 (0x00000004U) +#define EMAC_RXTEARDOWN_RXTDNCH_CHA5 (0x00000005U) +#define EMAC_RXTEARDOWN_RXTDNCH_CHA6 (0x00000006U) +#define EMAC_RXTEARDOWN_RXTDNCH_CHA7 (0x00000007U) + + +/* TXINTSTATRAW */ + + +#define EMAC_TXINTSTATRAW_TX7PEND (0x00000080U) +#define EMAC_TXINTSTATRAW_TX7PEND_SHIFT (0x00000007U) + +#define EMAC_TXINTSTATRAW_TX6PEND (0x00000040U) +#define EMAC_TXINTSTATRAW_TX6PEND_SHIFT (0x00000006U) + +#define EMAC_TXINTSTATRAW_TX5PEND (0x00000020U) +#define EMAC_TXINTSTATRAW_TX5PEND_SHIFT (0x00000005U) + +#define EMAC_TXINTSTATRAW_TX4PEND (0x00000010U) +#define EMAC_TXINTSTATRAW_TX4PEND_SHIFT (0x00000004U) + +#define EMAC_TXINTSTATRAW_TX3PEND (0x00000008U) +#define EMAC_TXINTSTATRAW_TX3PEND_SHIFT (0x00000003U) + +#define EMAC_TXINTSTATRAW_TX2PEND (0x00000004U) +#define EMAC_TXINTSTATRAW_TX2PEND_SHIFT (0x00000002U) + +#define EMAC_TXINTSTATRAW_TX1PEND (0x00000002U) +#define EMAC_TXINTSTATRAW_TX1PEND_SHIFT (0x00000001U) + +#define EMAC_TXINTSTATRAW_TX0PEND (0x00000001U) +#define EMAC_TXINTSTATRAW_TX0PEND_SHIFT (0x00000000U) + + +/* TXINTSTATMASKED */ + + +#define EMAC_TXINTSTATMASKED_TX7PEND (0x00000080U) +#define EMAC_TXINTSTATMASKED_TX7PEND_SHIFT (0x00000007U) + +#define EMAC_TXINTSTATMASKED_TX6PEND (0x00000040U) +#define EMAC_TXINTSTATMASKED_TX6PEND_SHIFT (0x00000006U) + +#define EMAC_TXINTSTATMASKED_TX5PEND (0x00000020U) +#define EMAC_TXINTSTATMASKED_TX5PEND_SHIFT (0x00000005U) + +#define EMAC_TXINTSTATMASKED_TX4PEND (0x00000010U) +#define EMAC_TXINTSTATMASKED_TX4PEND_SHIFT (0x00000004U) + +#define EMAC_TXINTSTATMASKED_TX3PEND (0x00000008U) +#define EMAC_TXINTSTATMASKED_TX3PEND_SHIFT (0x00000003U) + +#define EMAC_TXINTSTATMASKED_TX2PEND (0x00000004U) +#define EMAC_TXINTSTATMASKED_TX2PEND_SHIFT (0x00000002U) + +#define EMAC_TXINTSTATMASKED_TX1PEND (0x00000002U) +#define EMAC_TXINTSTATMASKED_TX1PEND_SHIFT (0x00000001U) + +#define EMAC_TXINTSTATMASKED_TX0PEND (0x00000001U) +#define EMAC_TXINTSTATMASKED_TX0PEND_SHIFT (0x00000000U) + + +/* TXINTMASKSET */ + + +#define EMAC_TXINTMASKSET_TX7MASK (0x00000080U) +#define EMAC_TXINTMASKSET_TX7MASK_SHIFT (0x00000007U) + +#define EMAC_TXINTMASKSET_TX6MASK (0x00000040U) +#define EMAC_TXINTMASKSET_TX6MASK_SHIFT (0x00000006U) + +#define EMAC_TXINTMASKSET_TX5MASK (0x00000020U) +#define EMAC_TXINTMASKSET_TX5MASK_SHIFT (0x00000005U) + +#define EMAC_TXINTMASKSET_TX4MASK (0x00000010U) +#define EMAC_TXINTMASKSET_TX4MASK_SHIFT (0x00000004U) + +#define EMAC_TXINTMASKSET_TX3MASK (0x00000008U) +#define EMAC_TXINTMASKSET_TX3MASK_SHIFT (0x00000003U) + +#define EMAC_TXINTMASKSET_TX2MASK (0x00000004U) +#define EMAC_TXINTMASKSET_TX2MASK_SHIFT (0x00000002U) + +#define EMAC_TXINTMASKSET_TX1MASK (0x00000002U) +#define EMAC_TXINTMASKSET_TX1MASK_SHIFT (0x00000001U) + +#define EMAC_TXINTMASKSET_TX0MASK (0x00000001U) +#define EMAC_TXINTMASKSET_TX0MASK_SHIFT (0x00000000U) + + +/* TXINTMASKCLEAR */ + + +#define EMAC_TXINTMASKCLEAR_TX7MASK (0x00000080U) +#define EMAC_TXINTMASKCLEAR_TX7MASK_SHIFT (0x00000007U) + +#define EMAC_TXINTMASKCLEAR_TX6MASK (0x00000040U) +#define EMAC_TXINTMASKCLEAR_TX6MASK_SHIFT (0x00000006U) + +#define EMAC_TXINTMASKCLEAR_TX5MASK (0x00000020U) +#define EMAC_TXINTMASKCLEAR_TX5MASK_SHIFT (0x00000005U) + +#define EMAC_TXINTMASKCLEAR_TX4MASK (0x00000010U) +#define EMAC_TXINTMASKCLEAR_TX4MASK_SHIFT (0x00000004U) + +#define EMAC_TXINTMASKCLEAR_TX3MASK (0x00000008U) +#define EMAC_TXINTMASKCLEAR_TX3MASK_SHIFT (0x00000003U) + +#define EMAC_TXINTMASKCLEAR_TX2MASK (0x00000004U) +#define EMAC_TXINTMASKCLEAR_TX2MASK_SHIFT (0x00000002U) + +#define EMAC_TXINTMASKCLEAR_TX1MASK (0x00000002U) +#define EMAC_TXINTMASKCLEAR_TX1MASK_SHIFT (0x00000001U) + +#define EMAC_TXINTMASKCLEAR_TX0MASK (0x00000001U) +#define EMAC_TXINTMASKCLEAR_TX0MASK_SHIFT (0x00000000U) + + +/* MACINVECTOR */ + + +#define EMAC_MACINVECTOR_STATPEND (0x08000000U) +#define EMAC_MACINVECTOR_STATPEND_SHIFT (0x0000001BU) + +#define EMAC_MACINVECTOR_HOSTPEND (0x04000000U) +#define EMAC_MACINVECTOR_HOSTPEND_SHIFT (0x0000001AU) + +#define EMAC_MACINVECTOR_LINKINT0 (0x02000000U) +#define EMAC_MACINVECTOR_LINKINT0_SHIFT (0x00000019U) + +#define EMAC_MACINVECTOR_USERINT0 (0x01000000U) +#define EMAC_MACINVECTOR_USERINT0_SHIFT (0x00000018U) + +#define EMAC_MACINVECTOR_TXPEND (0x00FF0000U) +#define EMAC_MACINVECTOR_TXPEND_SHIFT (0x00000010U) + +#define EMAC_MACINVECTOR_RXTHRESHPEND (0x0000FF00U) +#define EMAC_MACINVECTOR_RXTHRESHPEND_SHIFT (0x00000008U) + +#define EMAC_MACINVECTOR_RXPEND (0x000000FFU) +#define EMAC_MACINVECTOR_RXPEND_SHIFT (0x00000000U) + + +/* MACEOIVECTOR */ + + +#define EMAC_MACEOIVECTOR_INTVECT (0x0000001FU) +#define EMAC_MACEOIVECTOR_INTVECT_SHIFT (0x00000000U) +/*----INTVECT Tokens----*/ +#define EMAC_MACEOIVECTOR_INTVECT_C0RXTHRESH (0x00000000U) +#define EMAC_MACEOIVECTOR_INTVECT_C0RX (0x00000001U) +#define EMAC_MACEOIVECTOR_INTVECT_C0TX (0x00000002U) +#define EMAC_MACEOIVECTOR_INTVECT_C0MISC (0x00000003U) +#define EMAC_MACEOIVECTOR_INTVECT_C1RXTHRESH (0x00000004U) +#define EMAC_MACEOIVECTOR_INTVECT_C1RX (0x00000005U) +#define EMAC_MACEOIVECTOR_INTVECT_C1TX (0x00000006U) +#define EMAC_MACEOIVECTOR_INTVECT_C1MISC (0x00000007U) + + +/* RXINTSTATRAW */ + + +#define EMAC_RXINTSTATRAW_RX7THRESHPEND (0x00008000U) +#define EMAC_RXINTSTATRAW_RX7THRESHPEND_SHIFT (0x0000000FU) + +#define EMAC_RXINTSTATRAW_RX6THRESHPEND (0x00004000U) +#define EMAC_RXINTSTATRAW_RX6THRESHPEND_SHIFT (0x0000000EU) + +#define EMAC_RXINTSTATRAW_RX5THRESHPEND (0x00002000U) +#define EMAC_RXINTSTATRAW_RX5THRESHPEND_SHIFT (0x0000000DU) + +#define EMAC_RXINTSTATRAW_RX4THRESHPEND (0x00001000U) +#define EMAC_RXINTSTATRAW_RX4THRESHPEND_SHIFT (0x0000000CU) + +#define EMAC_RXINTSTATRAW_RX3THRESHPEND (0x00000800U) +#define EMAC_RXINTSTATRAW_RX3THRESHPEND_SHIFT (0x0000000BU) + +#define EMAC_RXINTSTATRAW_RX2THRESHPEND (0x00000400U) +#define EMAC_RXINTSTATRAW_RX2THRESHPEND_SHIFT (0x0000000AU) + +#define EMAC_RXINTSTATRAW_RX1THRESHPEND (0x00000200U) +#define EMAC_RXINTSTATRAW_RX1THRESHPEND_SHIFT (0x00000009U) + +#define EMAC_RXINTSTATRAW_RX0THRESHPEND (0x00000100U) +#define EMAC_RXINTSTATRAW_RX0THRESHPEND_SHIFT (0x00000008U) + +#define EMAC_RXINTSTATRAW_RX7PEND (0x00000080U) +#define EMAC_RXINTSTATRAW_RX7PEND_SHIFT (0x00000007U) + +#define EMAC_RXINTSTATRAW_RX6PEND (0x00000040U) +#define EMAC_RXINTSTATRAW_RX6PEND_SHIFT (0x00000006U) + +#define EMAC_RXINTSTATRAW_RX5PEND (0x00000020U) +#define EMAC_RXINTSTATRAW_RX5PEND_SHIFT (0x00000005U) + +#define EMAC_RXINTSTATRAW_RX4PEND (0x00000010U) +#define EMAC_RXINTSTATRAW_RX4PEND_SHIFT (0x00000004U) + +#define EMAC_RXINTSTATRAW_RX3PEND (0x00000008U) +#define EMAC_RXINTSTATRAW_RX3PEND_SHIFT (0x00000003U) + +#define EMAC_RXINTSTATRAW_RX2PEND (0x00000004U) +#define EMAC_RXINTSTATRAW_RX2PEND_SHIFT (0x00000002U) + +#define EMAC_RXINTSTATRAW_RX1PEND (0x00000002U) +#define EMAC_RXINTSTATRAW_RX1PEND_SHIFT (0x00000001U) + +#define EMAC_RXINTSTATRAW_RX0PEND (0x00000001U) +#define EMAC_RXINTSTATRAW_RX0PEND_SHIFT (0x00000000U) + + +/* RXINTSTATMASKED */ + + +#define EMAC_RXINTSTATMASKED_RX7THRESHPEND (0x00008000U) +#define EMAC_RXINTSTATMASKED_RX7THRESHPEND_SHIFT (0x0000000FU) + +#define EMAC_RXINTSTATMASKED_RX6THRESHPEND (0x00004000U) +#define EMAC_RXINTSTATMASKED_RX6THRESHPEND_SHIFT (0x0000000EU) + +#define EMAC_RXINTSTATMASKED_RX5THRESHPEND (0x00002000U) +#define EMAC_RXINTSTATMASKED_RX5THRESHPEND_SHIFT (0x0000000DU) + +#define EMAC_RXINTSTATMASKED_RX4THRESHPEND (0x00001000U) +#define EMAC_RXINTSTATMASKED_RX4THRESHPEND_SHIFT (0x0000000CU) + +#define EMAC_RXINTSTATMASKED_RX3THRESHPEND (0x00000800U) +#define EMAC_RXINTSTATMASKED_RX3THRESHPEND_SHIFT (0x0000000BU) + +#define EMAC_RXINTSTATMASKED_RX2THRESHPEND (0x00000400U) +#define EMAC_RXINTSTATMASKED_RX2THRESHPEND_SHIFT (0x0000000AU) + +#define EMAC_RXINTSTATMASKED_RX1THRESHPEND (0x00000200U) +#define EMAC_RXINTSTATMASKED_RX1THRESHPEND_SHIFT (0x00000009U) + +#define EMAC_RXINTSTATMASKED_RX0THRESHPEND (0x00000100U) +#define EMAC_RXINTSTATMASKED_RX0THRESHPEND_SHIFT (0x00000008U) + +#define EMAC_RXINTSTATMASKED_RX7PEND (0x00000080U) +#define EMAC_RXINTSTATMASKED_RX7PEND_SHIFT (0x00000007U) + +#define EMAC_RXINTSTATMASKED_RX6PEND (0x00000040U) +#define EMAC_RXINTSTATMASKED_RX6PEND_SHIFT (0x00000006U) + +#define EMAC_RXINTSTATMASKED_RX5PEND (0x00000020U) +#define EMAC_RXINTSTATMASKED_RX5PEND_SHIFT (0x00000005U) + +#define EMAC_RXINTSTATMASKED_RX4PEND (0x00000010U) +#define EMAC_RXINTSTATMASKED_RX4PEND_SHIFT (0x00000004U) + +#define EMAC_RXINTSTATMASKED_RX3PEND (0x00000008U) +#define EMAC_RXINTSTATMASKED_RX3PEND_SHIFT (0x00000003U) + +#define EMAC_RXINTSTATMASKED_RX2PEND (0x00000004U) +#define EMAC_RXINTSTATMASKED_RX2PEND_SHIFT (0x00000002U) + +#define EMAC_RXINTSTATMASKED_RX1PEND (0x00000002U) +#define EMAC_RXINTSTATMASKED_RX1PEND_SHIFT (0x00000001U) + +#define EMAC_RXINTSTATMASKED_RX0PEND (0x00000001U) +#define EMAC_RXINTSTATMASKED_RX0PEND_SHIFT (0x00000000U) + + +/* RXINTMASKSET */ + + +#define EMAC_RXINTMASKSET_RX7THRESHMASK (0x00008000U) +#define EMAC_RXINTMASKSET_RX7THRESHMASK_SHIFT (0x0000000FU) + +#define EMAC_RXINTMASKSET_RX6THRESHMASK (0x00004000U) +#define EMAC_RXINTMASKSET_RX6THRESHMASK_SHIFT (0x0000000EU) + +#define EMAC_RXINTMASKSET_RX5THRESHMASK (0x00002000U) +#define EMAC_RXINTMASKSET_RX5THRESHMASK_SHIFT (0x0000000DU) + +#define EMAC_RXINTMASKSET_RX4THRESHMASK (0x00001000U) +#define EMAC_RXINTMASKSET_RX4THRESHMASK_SHIFT (0x0000000CU) + +#define EMAC_RXINTMASKSET_RX3THRESHMASK (0x00000800U) +#define EMAC_RXINTMASKSET_RX3THRESHMASK_SHIFT (0x0000000BU) + +#define EMAC_RXINTMASKSET_RX2THRESHMASK (0x00000400U) +#define EMAC_RXINTMASKSET_RX2THRESHMASK_SHIFT (0x0000000AU) + +#define EMAC_RXINTMASKSET_RX1THRESHMASK (0x00000200U) +#define EMAC_RXINTMASKSET_RX1THRESHMASK_SHIFT (0x00000009U) + +#define EMAC_RXINTMASKSET_RX0THRESHMASK (0x00000100U) +#define EMAC_RXINTMASKSET_RX0THRESHMASK_SHIFT (0x00000008U) + +#define EMAC_RXINTMASKSET_RX7MASK (0x00000080U) +#define EMAC_RXINTMASKSET_RX7MASK_SHIFT (0x00000007U) + +#define EMAC_RXINTMASKSET_RX6MASK (0x00000040U) +#define EMAC_RXINTMASKSET_RX6MASK_SHIFT (0x00000006U) + +#define EMAC_RXINTMASKSET_RX5MASK (0x00000020U) +#define EMAC_RXINTMASKSET_RX5MASK_SHIFT (0x00000005U) + +#define EMAC_RXINTMASKSET_RX4MASK (0x00000010U) +#define EMAC_RXINTMASKSET_RX4MASK_SHIFT (0x00000004U) + +#define EMAC_RXINTMASKSET_RX3MASK (0x00000008U) +#define EMAC_RXINTMASKSET_RX3MASK_SHIFT (0x00000003U) + +#define EMAC_RXINTMASKSET_RX2MASK (0x00000004U) +#define EMAC_RXINTMASKSET_RX2MASK_SHIFT (0x00000002U) + +#define EMAC_RXINTMASKSET_RX1MASK (0x00000002U) +#define EMAC_RXINTMASKSET_RX1MASK_SHIFT (0x00000001U) + +#define EMAC_RXINTMASKSET_RX0MASK (0x00000001U) +#define EMAC_RXINTMASKSET_RX0MASK_SHIFT (0x00000000U) + + +/* RXINTMASKCLEAR */ + + +#define EMAC_RXINTMASKCLEAR_RX7THRESHMASK (0x00008000U) +#define EMAC_RXINTMASKCLEAR_RX7THRESHMASK_SHIFT (0x0000000FU) + +#define EMAC_RXINTMASKCLEAR_RX6THRESHMASK (0x00004000U) +#define EMAC_RXINTMASKCLEAR_RX6THRESHMASK_SHIFT (0x0000000EU) + +#define EMAC_RXINTMASKCLEAR_RX5THRESHMASK (0x00002000U) +#define EMAC_RXINTMASKCLEAR_RX5THRESHMASK_SHIFT (0x0000000DU) + +#define EMAC_RXINTMASKCLEAR_RX4THRESHMASK (0x00001000U) +#define EMAC_RXINTMASKCLEAR_RX4THRESHMASK_SHIFT (0x0000000CU) + +#define EMAC_RXINTMASKCLEAR_RX3THRESHMASK (0x00000800U) +#define EMAC_RXINTMASKCLEAR_RX3THRESHMASK_SHIFT (0x0000000BU) + +#define EMAC_RXINTMASKCLEAR_RX2THRESHMASK (0x00000400U) +#define EMAC_RXINTMASKCLEAR_RX2THRESHMASK_SHIFT (0x0000000AU) + +#define EMAC_RXINTMASKCLEAR_RX1THRESHMASK (0x00000200U) +#define EMAC_RXINTMASKCLEAR_RX1THRESHMASK_SHIFT (0x00000009U) + +#define EMAC_RXINTMASKCLEAR_RX0THRESHMASK (0x00000100U) +#define EMAC_RXINTMASKCLEAR_RX0THRESHMASK_SHIFT (0x00000008U) + +#define EMAC_RXINTMASKCLEAR_RX7MASK (0x00000080U) +#define EMAC_RXINTMASKCLEAR_RX7MASK_SHIFT (0x00000007U) + +#define EMAC_RXINTMASKCLEAR_RX6MASK (0x00000040U) +#define EMAC_RXINTMASKCLEAR_RX6MASK_SHIFT (0x00000006U) + +#define EMAC_RXINTMASKCLEAR_RX5MASK (0x00000020U) +#define EMAC_RXINTMASKCLEAR_RX5MASK_SHIFT (0x00000005U) + +#define EMAC_RXINTMASKCLEAR_RX4MASK (0x00000010U) +#define EMAC_RXINTMASKCLEAR_RX4MASK_SHIFT (0x00000004U) + +#define EMAC_RXINTMASKCLEAR_RX3MASK (0x00000008U) +#define EMAC_RXINTMASKCLEAR_RX3MASK_SHIFT (0x00000003U) + +#define EMAC_RXINTMASKCLEAR_RX2MASK (0x00000004U) +#define EMAC_RXINTMASKCLEAR_RX2MASK_SHIFT (0x00000002U) + +#define EMAC_RXINTMASKCLEAR_RX1MASK (0x00000002U) +#define EMAC_RXINTMASKCLEAR_RX1MASK_SHIFT (0x00000001U) + +#define EMAC_RXINTMASKCLEAR_RX0MASK (0x00000001U) +#define EMAC_RXINTMASKCLEAR_RX0MASK_SHIFT (0x00000000U) + + +/* MACINTSTATRAW */ + + +#define EMAC_MACINTSTATRAW_HOSTPEND (0x00000002U) +#define EMAC_MACINTSTATRAW_HOSTPEND_SHIFT (0x00000001U) + +#define EMAC_MACINTSTATRAW_STATPEND (0x00000001U) +#define EMAC_MACINTSTATRAW_STATPEND_SHIFT (0x00000000U) + + +/* MACINTSTATMASKED */ + + +#define EMAC_MACINTSTATMASKED_HOSTPEND (0x00000002U) +#define EMAC_MACINTSTATMASKED_HOSTPEND_SHIFT (0x00000001U) + +#define EMAC_MACINTSTATMASKED_STATPEND (0x00000001U) +#define EMAC_MACINTSTATMASKED_STATPEND_SHIFT (0x00000000U) + + +/* MACINTMASKSET */ + + +#define EMAC_MACINTMASKSET_HOSTMASK (0x00000002U) +#define EMAC_MACINTMASKSET_HOSTMASK_SHIFT (0x00000001U) + +#define EMAC_MACINTMASKSET_STATMASK (0x00000001U) +#define EMAC_MACINTMASKSET_STATMASK_SHIFT (0x00000000U) + + +/* MACINTMASKCLEAR */ + + +#define EMAC_MACINTMASKCLEAR_HOSTMASK (0x00000002U) +#define EMAC_MACINTMASKCLEAR_HOSTMASK_SHIFT (0x00000001U) + +#define EMAC_MACINTMASKCLEAR_STATMASK (0x00000001U) +#define EMAC_MACINTMASKCLEAR_STATMASK_SHIFT (0x00000000U) + + +/* RXMBPENABLE */ + + +#define EMAC_RXMBPENABLE_RXPASSCRC (0x40000000U) +#define EMAC_RXMBPENABLE_RXPASSCRC_SHIFT (0x0000001EU) +#define EMAC_RXMBPENABLE_RXQOSEN (0x20000000U) +#define EMAC_RXMBPENABLE_RXQOSEN_SHIFT (0x0000001DU) +#define EMAC_RXMBPENABLE_RXNOCHAIN (0x10000000U) +#define EMAC_RXMBPENABLE_RXNOCHAIN_SHIFT (0x0000001CU) +#define EMAC_RXMBPENABLE_RXCMFEN (0x01000000U) +#define EMAC_RXMBPENABLE_RXCMFEN_SHIFT (0x00000018U) +#define EMAC_RXMBPENABLE_RXCSFEN (0x00800000U) +#define EMAC_RXMBPENABLE_RXCSFEN_SHIFT (0x00000017U) +#define EMAC_RXMBPENABLE_RXCEFEN (0x00400000U) +#define EMAC_RXMBPENABLE_RXCEFEN_SHIFT (0x00000016U) +#define EMAC_RXMBPENABLE_RXCAFEN (0x00200000U) +#define EMAC_RXMBPENABLE_RXCAFEN_SHIFT (0x00000015U) +/*----RXCAFEN Tokens----*/ +#define EMAC_RXMBPENABLE_RXPROMCH (0x00070000U) +#define EMAC_RXMBPENABLE_RXPROMCH_SHIFT (0x00000010U) +#define EMAC_RXMBPENABLE_RXPROMCH_CHA0 (0x00000000U) +#define EMAC_RXMBPENABLE_RXPROMCH_CHA1 (0x00000001U) +#define EMAC_RXMBPENABLE_RXPROMCH_CHA2 (0x00000002U) +#define EMAC_RXMBPENABLE_RXPROMCH_CHA3 (0x00000003U) +#define EMAC_RXMBPENABLE_RXPROMCH_CHA4 (0x00000004U) +#define EMAC_RXMBPENABLE_RXPROMCH_CHA5 (0x00000005U) +#define EMAC_RXMBPENABLE_RXPROMCH_CHA6 (0x00000006U) +#define EMAC_RXMBPENABLE_RXPROMCH_CHA7 (0x00000007U) + + +#define EMAC_RXMBPENABLE_RXBROADEN (0x00002000U) +#define EMAC_RXMBPENABLE_RXBROADEN_SHIFT (0x0000000DU) +#define EMAC_RXMBPENABLE_RXBROADCH (0x00000700U) +#define EMAC_RXMBPENABLE_RXBROADCH_SHIFT (0x00000008U) +/*----RXBROADCH Tokens----*/ +#define EMAC_RXMBPENABLE_RXBROADCH_CHA0 (0x00000000U) +#define EMAC_RXMBPENABLE_RXBROADCH_CHA1 (0x00000001U) +#define EMAC_RXMBPENABLE_RXBROADCH_CHA2 (0x00000002U) +#define EMAC_RXMBPENABLE_RXBROADCH_CHA3 (0x00000003U) +#define EMAC_RXMBPENABLE_RXBROADCH_CHA4 (0x00000004U) +#define EMAC_RXMBPENABLE_RXBROADCH_CHA5 (0x00000005U) +#define EMAC_RXMBPENABLE_RXBROADCH_CHA6 (0x00000006U) +#define EMAC_RXMBPENABLE_RXBROADCH_CHA7 (0x00000007U) + + +#define EMAC_RXMBPENABLE_RXMULTEN (0x00000020U) +#define EMAC_RXMBPENABLE_RXMULTEN_SHIFT (0x00000005U) +#define EMAC_RXMBPENABLE_RXMULTCH (0x00000007U) +#define EMAC_RXMBPENABLE_RXMULTCH_SHIFT (0x00000000U) +/*----RXMULTCH Tokens----*/ +#define EMAC_RXMBPENABLE_RXMULTCH_CHA0 (0x00000000U) +#define EMAC_RXMBPENABLE_RXMULTCH_CHA1 (0x00000001U) +#define EMAC_RXMBPENABLE_RXMULTCH_CHA2 (0x00000002U) +#define EMAC_RXMBPENABLE_RXMULTCH_CHA3 (0x00000003U) +#define EMAC_RXMBPENABLE_RXMULTCH_CHA4 (0x00000004U) +#define EMAC_RXMBPENABLE_RXMULTCH_CHA5 (0x00000005U) +#define EMAC_RXMBPENABLE_RXMULTCH_CHA6 (0x00000006U) +#define EMAC_RXMBPENABLE_RXMULTCH_CHA7 (0x00000007U) + + +/* RXUNICASTSET */ + + +#define EMAC_RXUNICASTSET_RXCH7EN (0x00000080U) +#define EMAC_RXUNICASTSET_RXCH7EN_SHIFT (0x00000007U) +#define EMAC_RXUNICASTSET_RXCH6EN (0x00000040U) +#define EMAC_RXUNICASTSET_RXCH6EN_SHIFT (0x00000006U) +#define EMAC_RXUNICASTSET_RXCH5EN (0x00000020U) +#define EMAC_RXUNICASTSET_RXCH5EN_SHIFT (0x00000005U) +#define EMAC_RXUNICASTSET_RXCH4EN (0x00000010U) +#define EMAC_RXUNICASTSET_RXCH4EN_SHIFT (0x00000004U) +#define EMAC_RXUNICASTSET_RXCH3EN (0x00000008U) +#define EMAC_RXUNICASTSET_RXCH3EN_SHIFT (0x00000003U) +#define EMAC_RXUNICASTSET_RXCH2EN (0x00000004U) +#define EMAC_RXUNICASTSET_RXCH2EN_SHIFT (0x00000002U) +#define EMAC_RXUNICASTSET_RXCH1EN (0x00000002U) +#define EMAC_RXUNICASTSET_RXCH1EN_SHIFT (0x00000001U) +#define EMAC_RXUNICASTSET_RXCH0EN (0x00000001U) +#define EMAC_RXUNICASTSET_RXCH0EN_SHIFT (0x00000000U) + +/* RXUNICASTCLEAR */ + + +#define EMAC_RXUNICASTCLEAR_RXCH7EN (0x00000080U) +#define EMAC_RXUNICASTCLEAR_RXCH7EN_SHIFT (0x00000007U) +#define EMAC_RXUNICASTCLEAR_RXCH6EN (0x00000040U) +#define EMAC_RXUNICASTCLEAR_RXCH6EN_SHIFT (0x00000006U) +#define EMAC_RXUNICASTCLEAR_RXCH5EN (0x00000020U) +#define EMAC_RXUNICASTCLEAR_RXCH5EN_SHIFT (0x00000005U) +#define EMAC_RXUNICASTCLEAR_RXCH4EN (0x00000010U) +#define EMAC_RXUNICASTCLEAR_RXCH4EN_SHIFT (0x00000004U) +#define EMAC_RXUNICASTCLEAR_RXCH3EN (0x00000008U) +#define EMAC_RXUNICASTCLEAR_RXCH3EN_SHIFT (0x00000003U) +#define EMAC_RXUNICASTCLEAR_RXCH2EN (0x00000004U) +#define EMAC_RXUNICASTCLEAR_RXCH2EN_SHIFT (0x00000002U) +#define EMAC_RXUNICASTCLEAR_RXCH1EN (0x00000002U) +#define EMAC_RXUNICASTCLEAR_RXCH1EN_SHIFT (0x00000001U) +#define EMAC_RXUNICASTCLEAR_RXCH0EN (0x00000001U) +#define EMAC_RXUNICASTCLEAR_RXCH0EN_SHIFT (0x00000000U) + +/* RXMAXLEN */ + + +#define EMAC_RXMAXLEN_RXMAXLEN (0x0000FFFFU) +#define EMAC_RXMAXLEN_RXMAXLEN_SHIFT (0x00000000U) + + +/* RXBUFFEROFFSET */ + + +#define EMAC_RXBUFFEROFFSET_RXBUFFEROFFSET (0x0000FFFFU) +#define EMAC_RXBUFFEROFFSET_RXBUFFEROFFSET_SHIFT (0x00000000U) + + +/* RXFILTERLOWTHRESH */ + + +#define EMAC_RXFILTERLOWTHRESH_RXFILTERTHRESH (0x000000FFU) +#define EMAC_RXFILTERLOWTHRESH_RXFILTERTHRESH_SHIFT (0x00000000U) + + +/* RX0FLOWTHRESH */ + + +#define EMAC_RX0FLOWTHRESH_RX0FLOWTHRESH (0x000000FFU) +#define EMAC_RX0FLOWTHRESH_RX0FLOWTHRESH_SHIFT (0x00000000U) + + +/* RX1FLOWTHRESH */ + + +#define EMAC_RX1FLOWTHRESH_RX1FLOWTHRESH (0x000000FFU) +#define EMAC_RX1FLOWTHRESH_RX1FLOWTHRESH_SHIFT (0x00000000U) + + +/* RX2FLOWTHRESH */ + + +#define EMAC_RX2FLOWTHRESH_RX2FLOWTHRESH (0x000000FFU) +#define EMAC_RX2FLOWTHRESH_RX2FLOWTHRESH_SHIFT (0x00000000U) + + +/* RX3FLOWTHRESH */ + + +#define EMAC_RX3FLOWTHRESH_RX3FLOWTHRESH (0x000000FFU) +#define EMAC_RX3FLOWTHRESH_RX3FLOWTHRESH_SHIFT (0x00000000U) + + +/* RX4FLOWTHRESH */ + + +#define EMAC_RX4FLOWTHRESH_RX4FLOWTHRESH (0x000000FFU) +#define EMAC_RX4FLOWTHRESH_RX4FLOWTHRESH_SHIFT (0x00000000U) + + +/* RX5FLOWTHRESH */ + + +#define EMAC_RX5FLOWTHRESH_RX5FLOWTHRESH (0x000000FFU) +#define EMAC_RX5FLOWTHRESH_RX5FLOWTHRESH_SHIFT (0x00000000U) + + +/* RX6FLOWTHRESH */ + + +#define EMAC_RX6FLOWTHRESH_RX6FLOWTHRESH (0x000000FFU) +#define EMAC_RX6FLOWTHRESH_RX6FLOWTHRESH_SHIFT (0x00000000U) + + +/* RX7FLOWTHRESH */ + + +#define EMAC_RX7FLOWTHRESH_RX7FLOWTHRESH (0x000000FFU) +#define EMAC_RX7FLOWTHRESH_RX7FLOWTHRESH_SHIFT (0x00000000U) + + +/* RX0FREEBUFFER */ + + +#define EMAC_RX0FREEBUFFER_RX0FREEBUF (0x0000FFFFU) +#define EMAC_RX0FREEBUFFER_RX0FREEBUF_SHIFT (0x00000000U) + + +/* RX1FREEBUFFER */ + + +#define EMAC_RX1FREEBUFFER_RX1FREEBUF (0x0000FFFFU) +#define EMAC_RX1FREEBUFFER_RX1FREEBUF_SHIFT (0x00000000U) + + +/* RX2FREEBUFFER */ + + +#define EMAC_RX2FREEBUFFER_RX2FREEBUF (0x0000FFFFU) +#define EMAC_RX2FREEBUFFER_RX2FREEBUF_SHIFT (0x00000000U) + + +/* RX3FREEBUFFER */ + + +#define EMAC_RX3FREEBUFFER_RX3FREEBUF (0x0000FFFFU) +#define EMAC_RX3FREEBUFFER_RX3FREEBUF_SHIFT (0x00000000U) + + +/* RX4FREEBUFFER */ + + +#define EMAC_RX4FREEBUFFER_RX4FREEBUF (0x0000FFFFU) +#define EMAC_RX4FREEBUFFER_RX4FREEBUF_SHIFT (0x00000000U) + + +/* RX5FREEBUFFER */ + + +#define EMAC_RX5FREEBUFFER_RX5FREEBUF (0x0000FFFFU) +#define EMAC_RX5FREEBUFFER_RX5FREEBUF_SHIFT (0x00000000U) + + +/* RX6FREEBUFFER */ + + +#define EMAC_RX6FREEBUFFER_RX6FREEBUF (0x0000FFFFU) +#define EMAC_RX6FREEBUFFER_RX6FREEBUF_SHIFT (0x00000000U) + + +/* RX7FREEBUFFER */ + + +#define EMAC_RX7FREEBUFFER_RX7FREEBUF (0x0000FFFFU) +#define EMAC_RX7FREEBUFFER_RX7FREEBUF_SHIFT (0x00000000U) + + +/* MACCONTROL */ + + + + + +#define EMAC_MACCONTROL_RMIISPEED (0x00008000U) +#define EMAC_MACCONTROL_RMIISPEED_SHIFT (0x0000000FU) +#define EMAC_MACCONTROL_RXOFFLENBLOCK (0x00004000U) +#define EMAC_MACCONTROL_RXOFFLENBLOCK_SHIFT (0x0000000EU) +#define EMAC_MACCONTROL_RXOWNERSHIP (0x00002000U) +#define EMAC_MACCONTROL_RXOWNERSHIP_SHIFT (0x0000000DU) +#define EMAC_MACCONTROL_CMDIDLE (0x00000800U) +#define EMAC_MACCONTROL_CMDIDLE_SHIFT (0x0000000BU) +#define EMAC_MACCONTROL_TXSHORTGAPEN (0x00000400U) +#define EMAC_MACCONTROL_TXSHORTGAPEN_SHIFT (0x0000000AU) +#define EMAC_MACCONTROL_TXPTYPE (0x00000200U) +#define EMAC_MACCONTROL_TXPTYPE_SHIFT (0x00000009U) +#define EMAC_MACCONTROL_TXPACE (0x00000040U) +#define EMAC_MACCONTROL_TXPACE_SHIFT (0x00000006U) +#define EMAC_MACCONTROL_GMIIEN (0x00000020U) +#define EMAC_MACCONTROL_GMIIEN_SHIFT (0x00000005U) +#define EMAC_MACCONTROL_TXFLOWEN (0x00000010U) +#define EMAC_MACCONTROL_TXFLOWEN_SHIFT (0x00000004U) +#define EMAC_MACCONTROL_RXBUFFERFLOWEN (0x00000008U) +#define EMAC_MACCONTROL_RXBUFFERFLOWEN_SHIFT (0x00000003U) +#define EMAC_MACCONTROL_LOOPBACK (0x00000002U) +#define EMAC_MACCONTROL_LOOPBACK_SHIFT (0x00000001U) +#define EMAC_MACCONTROL_FULLDUPLEX (0x00000001U) +#define EMAC_MACCONTROL_FULLDUPLEX_SHIFT (0x00000000U) + + +/* MACSTATUS */ + +#define EMAC_MACSTATUS_IDLE (0x80000000U) +#define EMAC_MACSTATUS_IDLE_SHIFT (0x0000001FU) +#define EMAC_MACSTATUS_TXERRCODE (0x00F00000U) +#define EMAC_MACSTATUS_TXERRCODE_SHIFT (0x00000014U) +/*----TXERRCODE Tokens----*/ +#define EMAC_MACSTATUS_TXERRCODE_NOERROR (0x00000000U) +#define EMAC_MACSTATUS_TXERRCODE_SOPERROR (0x00000001U) +#define EMAC_MACSTATUS_TXERRCODE_OWNERSHIP (0x00000002U) +#define EMAC_MACSTATUS_TXERRCODE_NOEOP (0x00000003U) +#define EMAC_MACSTATUS_TXERRCODE_NULLPTR (0x00000004U) +#define EMAC_MACSTATUS_TXERRCODE_NULLEN (0x00000005U) +#define EMAC_MACSTATUS_TXERRCODE_LENERROR (0x00000006U) + + +#define EMAC_MACSTATUS_TXERRCH (0x00070000U) +#define EMAC_MACSTATUS_TXERRCH_SHIFT (0x00000010U) +/*----TXERRCH Tokens----*/ +#define EMAC_MACSTATUS_TXERRCH_CHA0 (0x00000000U) +#define EMAC_MACSTATUS_TXERRCH_CHA1 (0x00000001U) +#define EMAC_MACSTATUS_TXERRCH_CHA2 (0x00000002U) +#define EMAC_MACSTATUS_TXERRCH_CHA3 (0x00000003U) +#define EMAC_MACSTATUS_TXERRCH_CHA4 (0x00000004U) +#define EMAC_MACSTATUS_TXERRCH_CHA5 (0x00000005U) +#define EMAC_MACSTATUS_TXERRCH_CHA6 (0x00000006U) +#define EMAC_MACSTATUS_TXERRCH_CHA7 (0x00000007U) + +#define EMAC_MACSTATUS_RXERRCODE (0x0000F000U) +#define EMAC_MACSTATUS_RXERRCODE_SHIFT (0x0000000CU) +/*----RXERRCODE Tokens----*/ +#define EMAC_MACSTATUS_RXERRCODE_NOERROR (0x00000000U) +#define EMAC_MACSTATUS_RXERRCODE_OWNERSHIP (0x00000002U) +#define EMAC_MACSTATUS_RXERRCODE_NULLPTR (0x00000004U) + + +#define EMAC_MACSTATUS_RXERRCH (0x00000700U) +#define EMAC_MACSTATUS_RXERRCH_SHIFT (0x00000008U) +/*----RXERRCH Tokens----*/ +#define EMAC_MACSTATUS_RXERRCH_CHA0 (0x00000000U) +#define EMAC_MACSTATUS_RXERRCH_CHA1 (0x00000001U) +#define EMAC_MACSTATUS_RXERRCH_CHA2 (0x00000002U) +#define EMAC_MACSTATUS_RXERRCH_CHA3 (0x00000003U) +#define EMAC_MACSTATUS_RXERRCH_CHA4 (0x00000004U) +#define EMAC_MACSTATUS_RXERRCH_CHA5 (0x00000005U) +#define EMAC_MACSTATUS_RXERRCH_CHA6 (0x00000006U) +#define EMAC_MACSTATUS_RXERRCH_CHA7 (0x00000007U) + + + + +#define EMAC_MACSTATUS_RXQOSACT (0x00000004U) +#define EMAC_MACSTATUS_RXQOSACT_SHIFT (0x00000002U) +#define EMAC_MACSTATUS_RXFLOWACT (0x00000002U) +#define EMAC_MACSTATUS_RXFLOWACT_SHIFT (0x00000001U) +#define EMAC_MACSTATUS_TXFLOWACT (0x00000001U) +#define EMAC_MACSTATUS_TXFLOWACT_SHIFT (0x00000000U) + +/* EMCONTROL */ + + +#define EMAC_EMCONTROL_SOFT (0x00000002U) +#define EMAC_EMCONTROL_SOFT_SHIFT (0x00000001U) + +#define EMAC_EMCONTROL_FREE (0x00000001U) +#define EMAC_EMCONTROL_FREE_SHIFT (0x00000000U) + + +/* FIFOCONTROL */ + + +#define EMAC_FIFOCONTROL_TXCELLTHRESH (0x00000003U) +#define EMAC_FIFOCONTROL_TXCELLTHRESH_SHIFT (0x00000000U) + + +/* MACCONFIG */ + +#define EMAC_MACCONFIG_TXCELLDEPTH (0xFF000000U) +#define EMAC_MACCONFIG_TXCELLDEPTH_SHIFT (0x00000018U) + +#define EMAC_MACCONFIG_RXCELLDEPTH (0x00FF0000U) +#define EMAC_MACCONFIG_RXCELLDEPTH_SHIFT (0x00000010U) + +#define EMAC_MACCONFIG_ADDRESSTYPE (0x0000FF00U) +#define EMAC_MACCONFIG_ADDRESSTYPE_SHIFT (0x00000008U) + +#define EMAC_MACCONFIG_MACCFIG (0x000000FFU) +#define EMAC_MACCONFIG_MACCFIG_SHIFT (0x00000000U) + + +/* SOFTRESET */ + + +#define EMAC_SOFTRESET_SOFTRESET (0x00000001U) +#define EMAC_SOFTRESET_SOFTRESET_SHIFT (0x00000000U) + +/* MACSRCADDRLO */ + + +#define EMAC_MACSRCADDRLO_MACSRCADDR0 (0x0000FF00U) +#define EMAC_MACSRCADDRLO_MACSRCADDR0_SHIFT (0x00000008U) +#define EMAC_MACSRCADDRLO_MACSRCADDR1 (0x000000FFU) +#define EMAC_MACSRCADDRLO_MACSRCADDR1_SHIFT (0x00000000U) + + +/* MACSRCADDRHI */ + +#define EMAC_MACSRCADDRHI_MACSRCADDR2 (0xFF000000U) +#define EMAC_MACSRCADDRHI_MACSRCADDR2_SHIFT (0x00000018U) + +#define EMAC_MACSRCADDRHI_MACSRCADDR3 (0x00FF0000U) +#define EMAC_MACSRCADDRHI_MACSRCADDR3_SHIFT (0x00000010U) + +#define EMAC_MACSRCADDRHI_MACSRCADDR4 (0x0000FF00U) +#define EMAC_MACSRCADDRHI_MACSRCADDR4_SHIFT (0x00000008U) + +#define EMAC_MACSRCADDRHI_MACSRCADDR5 (0x000000FFU) +#define EMAC_MACSRCADDRHI_MACSRCADDR5_SHIFT (0x00000000U) + + +/* MACHASH1 */ + +#define EMAC_MACHASH1_MACHASH1 (0xFFFFFFFFU) +#define EMAC_MACHASH1_MACHASH1_SHIFT (0x00000000U) + + +/* MACHASH2 */ + +#define EMAC_MACHASH2_MACHASH2 (0xFFFFFFFFU) +#define EMAC_MACHASH2_MACHASH2_SHIFT (0x00000000U) + + +/* BOFFTEST */ + + +#define EMAC_BOFFTEST_RNDNUM (0x03FF0000U) +#define EMAC_BOFFTEST_RNDNUM_SHIFT (0x00000010U) + +#define EMAC_BOFFTEST_COLLCOUNT (0x0000F000U) +#define EMAC_BOFFTEST_COLLCOUNT_SHIFT (0x0000000CU) + + +#define EMAC_BOFFTEST_TXBACKOFF (0x000003FFU) +#define EMAC_BOFFTEST_TXBACKOFF_SHIFT (0x00000000U) + + +/* TPACETEST */ + + +#define EMAC_TPACETEST_PACEVAL (0x0000001FU) +#define EMAC_TPACETEST_PACEVAL_SHIFT (0x00000000U) + + +/* RXPAUSE */ + + +#define EMAC_RXPAUSE_PAUSETIMER (0x0000FFFFU) +#define EMAC_RXPAUSE_PAUSETIMER_SHIFT (0x00000000U) + + +/* TXPAUSE */ + + +#define EMAC_TXPAUSE_PAUSETIMER (0x0000FFFFU) +#define EMAC_TXPAUSE_PAUSETIMER_SHIFT (0x00000000U) + + +/* RXGOODFRAMES */ + +#define EMAC_RXGOODFRAMES_COUNT (0xFFFFFFFFU) +#define EMAC_RXGOODFRAMES_COUNT_SHIFT (0x00000000U) + + +/* RXBCASTFRAMES */ + +#define EMAC_RXBCASTFRAMES_COUNT (0xFFFFFFFFU) +#define EMAC_RXBCASTFRAMES_COUNT_SHIFT (0x00000000U) + + +/* RXMCASTFRAMES */ + +#define EMAC_RXMCASTFRAMES_COUNT (0xFFFFFFFFU) +#define EMAC_RXMCASTFRAMES_COUNT_SHIFT (0x00000000U) + + +/* RXPAUSEFRAMES */ + +#define EMAC_RXPAUSEFRAMES_COUNT (0xFFFFFFFFU) +#define EMAC_RXPAUSEFRAMES_COUNT_SHIFT (0x00000000U) + + +/* RXCRCERRORS */ + +#define EMAC_RXCRCERRORS_COUNT (0xFFFFFFFFU) +#define EMAC_RXCRCERRORS_COUNT_SHIFT (0x00000000U) + + +/* RXALIGNCODEERRORS */ + +#define EMAC_RXALIGNCODEERRORS_COUNT (0xFFFFFFFFU) +#define EMAC_RXALIGNCODEERRORS_COUNT_SHIFT (0x00000000U) + + +/* RXOVERSIZED */ + +#define EMAC_RXOVERSIZED_COUNT (0xFFFFFFFFU) +#define EMAC_RXOVERSIZED_COUNT_SHIFT (0x00000000U) + + +/* RXJABBER */ + +#define EMAC_RXJABBER_COUNT (0xFFFFFFFFU) +#define EMAC_RXJABBER_COUNT_SHIFT (0x00000000U) + + +/* RXUNDERSIZED */ + +#define EMAC_RXUNDERSIZED_COUNT (0xFFFFFFFFU) +#define EMAC_RXUNDERSIZED_COUNT_SHIFT (0x00000000U) + + +/* RXFRAGMENTS */ + +#define EMAC_RXFRAGMENTS_COUNT (0xFFFFFFFFU) +#define EMAC_RXFRAGMENTS_COUNT_SHIFT (0x00000000U) + + +/* RXFILTERED */ + +#define EMAC_RXFILTERED_COUNT (0xFFFFFFFFU) +#define EMAC_RXFILTERED_COUNT_SHIFT (0x00000000U) + + +/* RXQOSFILTERED */ + +#define EMAC_RXQOSFILTERED_COUNT (0xFFFFFFFFU) +#define EMAC_RXQOSFILTERED_COUNT_SHIFT (0x00000000U) + + +/* RXOCTETS */ + +#define EMAC_RXOCTETS_COUNT (0xFFFFFFFFU) +#define EMAC_RXOCTETS_COUNT_SHIFT (0x00000000U) + + +/* TXGOODFRAMES */ + +#define EMAC_TXGOODFRAMES_COUNT (0xFFFFFFFFU) +#define EMAC_TXGOODFRAMES_COUNT_SHIFT (0x00000000U) + + +/* TXBCASTFRAMES */ + +#define EMAC_TXBCASTFRAMES_COUNT (0xFFFFFFFFU) +#define EMAC_TXBCASTFRAMES_COUNT_SHIFT (0x00000000U) + + +/* TXMCASTFRAMES */ + +#define EMAC_TXMCASTFRAMES_COUNT (0xFFFFFFFFU) +#define EMAC_TXMCASTFRAMES_COUNT_SHIFT (0x00000000U) + + +/* TXPAUSEFRAMES */ + +#define EMAC_TXPAUSEFRAMES_COUNT (0xFFFFFFFFU) +#define EMAC_TXPAUSEFRAMES_COUNT_SHIFT (0x00000000U) + + +/* TXDEFERRED */ + +#define EMAC_TXDEFERRED_COUNT (0xFFFFFFFFU) +#define EMAC_TXDEFERRED_COUNT_SHIFT (0x00000000U) + + +/* TXCOLLISION */ + +#define EMAC_TXCOLLISION_COUNT (0xFFFFFFFFU) +#define EMAC_TXCOLLISION_COUNT_SHIFT (0x00000000U) + + +/* TXSINGLECOLL */ + +#define EMAC_TXSINGLECOLL_COUNT (0xFFFFFFFFU) +#define EMAC_TXSINGLECOLL_COUNT_SHIFT (0x00000000U) + + +/* TXMULTICOLL */ + +#define EMAC_TXMULTICOLL_COUNT (0xFFFFFFFFU) +#define EMAC_TXMULTICOLL_COUNT_SHIFT (0x00000000U) + + +/* TXEXCESSIVECOLL */ + +#define EMAC_TXEXCESSIVECOLL_COUNT (0xFFFFFFFFU) +#define EMAC_TXEXCESSIVECOLL_COUNT_SHIFT (0x00000000U) + + +/* TXLATECOLL */ + +#define EMAC_TXLATECOLL_COUNT (0xFFFFFFFFU) +#define EMAC_TXLATECOLL_COUNT_SHIFT (0x00000000U) + + +/* TXUNDERRUN */ + +#define EMAC_TXUNDERRUN_COUNT (0xFFFFFFFFU) +#define EMAC_TXUNDERRUN_COUNT_SHIFT (0x00000000U) + + +/* TXCARRIERSENSE */ + +#define EMAC_TXCARRIERSENSE_COUNT (0xFFFFFFFFU) +#define EMAC_TXCARRIERSENSE_COUNT_SHIFT (0x00000000U) + + +/* TXOCTETS */ + +#define EMAC_TXOCTETS_COUNT (0xFFFFFFFFU) +#define EMAC_TXOCTETS_COUNT_SHIFT (0x00000000U) + + +/* FRAME64 */ + +#define EMAC_FRAME64_COUNT (0xFFFFFFFFU) +#define EMAC_FRAME64_COUNT_SHIFT (0x00000000U) + + +/* FRAME65T127 */ + +#define EMAC_FRAME65T127_COUNT (0xFFFFFFFFU) +#define EMAC_FRAME65T127_COUNT_SHIFT (0x00000000U) + + +/* FRAME128T255 */ + +#define EMAC_FRAME128T255_COUNT (0xFFFFFFFFU) +#define EMAC_FRAME128T255_COUNT_SHIFT (0x00000000U) + + +/* FRAME256T511 */ + +#define EMAC_FRAME256T511_COUNT (0xFFFFFFFFU) +#define EMAC_FRAME256T511_COUNT_SHIFT (0x00000000U) + + +/* FRAME512T1023 */ + +#define EMAC_FRAME512T1023_COUNT (0xFFFFFFFFU) +#define EMAC_FRAME512T1023_COUNT_SHIFT (0x00000000U) + + +/* FRAME1024TUP */ + +#define EMAC_FRAME1024TUP_COUNT (0xFFFFFFFFU) +#define EMAC_FRAME1024TUP_COUNT_SHIFT (0x00000000U) + + +/* NETOCTETS */ + +#define EMAC_NETOCTETS_COUNT (0xFFFFFFFFU) +#define EMAC_NETOCTETS_COUNT_SHIFT (0x00000000U) + + +/* RXSOFOVERRUNS */ + +#define EMAC_RXSOFOVERRUNS_COUNT (0xFFFFFFFFU) +#define EMAC_RXSOFOVERRUNS_COUNT_SHIFT (0x00000000U) + + +/* RXMOFOVERRUNS */ + +#define EMAC_RXMOFOVERRUNS_COUNT (0xFFFFFFFFU) +#define EMAC_RXMOFOVERRUNS_COUNT_SHIFT (0x00000000U) + + +/* RXDMAOVERRUNS */ + +#define EMAC_RXDMAOVERRUNS_COUNT (0xFFFFFFFFU) +#define EMAC_RXDMAOVERRUNS_COUNT_SHIFT (0x00000000U) + + +/* MACADDRLO */ + + +#define EMAC_MACADDRLO_VALID (0x00100000U) +#define EMAC_MACADDRLO_VALID_SHIFT (0x00000014U) +#define EMAC_MACADDRLO_MATCHFILT (0x00080000U) +#define EMAC_MACADDRLO_MATCHFILT_SHIFT (0x00000013U) +#define EMAC_MACADDRLO_CHANNEL (0x00070000U) +#define EMAC_MACADDRLO_CHANNEL_SHIFT (0x00000010U) +#define EMAC_MACADDRLO_MACADDR0 (0x0000FF00U) +#define EMAC_MACADDRLO_MACADDR0_SHIFT (0x00000008U) +#define EMAC_MACADDRLO_MACADDR1 (0x000000FFU) +#define EMAC_MACADDRLO_MACADDR1_SHIFT (0x00000000U) + + +/* MACADDRHI */ + +#define EMAC_MACADDRHI_MACADDR2 (0xFF000000U) +#define EMAC_MACADDRHI_MACADDR2_SHIFT (0x00000018U) + +#define EMAC_MACADDRHI_MACADDR3 (0x00FF0000U) +#define EMAC_MACADDRHI_MACADDR3_SHIFT (0x00000010U) + +#define EMAC_MACADDRHI_MACADDR4 (0x0000FF00U) +#define EMAC_MACADDRHI_MACADDR4_SHIFT (0x00000008U) + +#define EMAC_MACADDRHI_MACADDR5 (0x000000FFU) +#define EMAC_MACADDRHI_MACADDR5_SHIFT (0x00000000U) + + +/* MACINDEX */ + + +#define EMAC_MACINDEX_MACINDEX (0x0000001FU) +#define EMAC_MACINDEX_MACINDEX_SHIFT (0x00000000U) + + +/* TX0HDP */ + +#define EMAC_TX0HDP_TX0HDP (0xFFFFFFFFU) +#define EMAC_TX0HDP_TX0HDP_SHIFT (0x00000000U) + + +/* TX1HDP */ + +#define EMAC_TX1HDP_TX1HDP (0xFFFFFFFFU) +#define EMAC_TX1HDP_TX1HDP_SHIFT (0x00000000U) + + +/* TX2HDP */ + +#define EMAC_TX2HDP_TX2HDP (0xFFFFFFFFU) +#define EMAC_TX2HDP_TX2HDP_SHIFT (0x00000000U) + + +/* TX3HDP */ + +#define EMAC_TX3HDP_TX3HDP (0xFFFFFFFFU) +#define EMAC_TX3HDP_TX3HDP_SHIFT (0x00000000U) + + +/* TX4HDP */ + +#define EMAC_TX4HDP_TX4HDP (0xFFFFFFFFU) +#define EMAC_TX4HDP_TX4HDP_SHIFT (0x00000000U) + + +/* TX5HDP */ + +#define EMAC_TX5HDP_TX5HDP (0xFFFFFFFFU) +#define EMAC_TX5HDP_TX5HDP_SHIFT (0x00000000U) + + +/* TX6HDP */ + +#define EMAC_TX6HDP_TX6HDP (0xFFFFFFFFU) +#define EMAC_TX6HDP_TX6HDP_SHIFT (0x00000000U) + + +/* TX7HDP */ + +#define EMAC_TX7HDP_TX7HDP (0xFFFFFFFFU) +#define EMAC_TX7HDP_TX7HDP_SHIFT (0x00000000U) + + +/* RX0HDP */ + +#define EMAC_RX0HDP_RX0HDP (0xFFFFFFFFU) +#define EMAC_RX0HDP_RX0HDP_SHIFT (0x00000000U) + + +/* RX1HDP */ + +#define EMAC_RX1HDP_RX1HDP (0xFFFFFFFFU) +#define EMAC_RX1HDP_RX1HDP_SHIFT (0x00000000U) + + +/* RX2HDP */ + +#define EMAC_RX2HDP_RX2HDP (0xFFFFFFFFU) +#define EMAC_RX2HDP_RX2HDP_SHIFT (0x00000000U) + + +/* RX3HDP */ + +#define EMAC_RX3HDP_RX3HDP (0xFFFFFFFFU) +#define EMAC_RX3HDP_RX3HDP_SHIFT (0x00000000U) + + +/* RX4HDP */ + +#define EMAC_RX4HDP_RX4HDP (0xFFFFFFFFU) +#define EMAC_RX4HDP_RX4HDP_SHIFT (0x00000000U) + + +/* RX5HDP */ + +#define EMAC_RX5HDP_RX5HDP (0xFFFFFFFFU) +#define EMAC_RX5HDP_RX5HDP_SHIFT (0x00000000U) + + +/* RX6HDP */ + +#define EMAC_RX6HDP_RX6HDP (0xFFFFFFFFU) +#define EMAC_RX6HDP_RX6HDP_SHIFT (0x00000000U) + + +/* RX7HDP */ + +#define EMAC_RX7HDP_RX7HDP (0xFFFFFFFFU) +#define EMAC_RX7HDP_RX7HDP_SHIFT (0x00000000U) + + +/* TX0CP */ + +#define EMAC_TX0CP_TX0CP (0xFFFFFFFFU) +#define EMAC_TX0CP_TX0CP_SHIFT (0x00000000U) + + +/* TX1CP */ + +#define EMAC_TX1CP_TX1CP (0xFFFFFFFFU) +#define EMAC_TX1CP_TX1CP_SHIFT (0x00000000U) + + +/* TX2CP */ + +#define EMAC_TX2CP_TX2CP (0xFFFFFFFFU) +#define EMAC_TX2CP_TX2CP_SHIFT (0x00000000U) + + +/* TX3CP */ + +#define EMAC_TX3CP_TX3CP (0xFFFFFFFFU) +#define EMAC_TX3CP_TX3CP_SHIFT (0x00000000U) + + +/* TX4CP */ + +#define EMAC_TX4CP_TX4CP (0xFFFFFFFFU) +#define EMAC_TX4CP_TX4CP_SHIFT (0x00000000U) + + +/* TX5CP */ + +#define EMAC_TX5CP_TX5CP (0xFFFFFFFFU) +#define EMAC_TX5CP_TX5CP_SHIFT (0x00000000U) + + +/* TX6CP */ + +#define EMAC_TX6CP_TX6CP (0xFFFFFFFFU) +#define EMAC_TX6CP_TX6CP_SHIFT (0x00000000U) + + +/* TX7CP */ + +#define EMAC_TX7CP_TX7CP (0xFFFFFFFFU) +#define EMAC_TX7CP_TX7CP_SHIFT (0x00000000U) + + +/* RX0CP */ + +#define EMAC_RX0CP_RX0CP (0xFFFFFFFFU) +#define EMAC_RX0CP_RX0CP_SHIFT (0x00000000U) + + +/* RX1CP */ + +#define EMAC_RX1CP_RX1CP (0xFFFFFFFFU) +#define EMAC_RX1CP_RX1CP_SHIFT (0x00000000U) + + +/* RX2CP */ + +#define EMAC_RX2CP_RX2CP (0xFFFFFFFFU) +#define EMAC_RX2CP_RX2CP_SHIFT (0x00000000U) + + +/* RX3CP */ + +#define EMAC_RX3CP_RX3CP (0xFFFFFFFFU) +#define EMAC_RX3CP_RX3CP_SHIFT (0x00000000U) + + +/* RX4CP */ + +#define EMAC_RX4CP_RX4CP (0xFFFFFFFFU) +#define EMAC_RX4CP_RX4CP_SHIFT (0x00000000U) + + +/* RX5CP */ + +#define EMAC_RX5CP_RX5CP (0xFFFFFFFFU) +#define EMAC_RX5CP_RX5CP_SHIFT (0x00000000U) + + +/* RX6CP */ + +#define EMAC_RX6CP_RX6CP (0xFFFFFFFFU) +#define EMAC_RX6CP_RX6CP_SHIFT (0x00000000U) + + +/* RX7CP */ + +#define EMAC_RX7CP_RX7CP (0xFFFFFFFFU) +#define EMAC_RX7CP_RX7CP_SHIFT (0x00000000U) + +/**@}*/ +#ifdef __cplusplus +} +#endif + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +#endif diff --git a/include/arch/rm46l8lp/halcogen/hw_emac_ctrl.h b/include/arch/rm46l8lp/halcogen/hw_emac_ctrl.h new file mode 100644 index 0000000..b13b1ff --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/hw_emac_ctrl.h @@ -0,0 +1,91 @@ +/* + * hw_emac1.h + */ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef _HW_EMAC_CTRL_H_ +#define _HW_EMAC_CTRL_H_ + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +#define EMAC_CTRL_REVID (0x0U) +#define EMAC_CTRL_SOFTRESET (0x4U) +#define EMAC_CTRL_INTCONTROL (0xCU) +#define EMAC_CTRL_C0RXTHRESHEN (0x10U) +#define EMAC_CTRL_CnRXEN(n) ((uint32)0x14u + (uint32)((uint32)(n) << 4)) +#define EMAC_CTRL_CnTXEN(n) ((uint32)0x18u + (uint32)((uint32)(n) << 4)) +#define EMAC_CTRL_CnMISCEN(n) ((uint32)0x1Cu + (uint32)((uint32)(n) << 4)) +#define EMAC_CTRL_CnRXTHRESHEN(n) ((uint32)0x20u + (uint32)((uint32)(n) << 4)) +#define EMAC_CTRL_C0RXTHRESHSTAT (0x40U) +#define EMAC_CTRL_C0RXSTAT (0x44U) +#define EMAC_CTRL_C0TXSTAT (0x48U) +#define EMAC_CTRL_C0MISCSTAT (0x4CU) +#define EMAC_CTRL_C1RXTHRESHSTAT (0x50U) +#define EMAC_CTRL_C1RXSTAT (0x54U) +#define EMAC_CTRL_C1TXSTAT (0x58U) +#define EMAC_CTRL_C1MISCSTAT (0x5CU) +#define EMAC_CTRL_C2RXTHRESHSTAT (0x60U) +#define EMAC_CTRL_C2RXSTAT (0x64U) +#define EMAC_CTRL_C2TXSTAT (0x68U) +#define EMAC_CTRL_C2MISCSTAT (0x6CU) +#define EMAC_CTRL_C0RXIMAX (0x70U) +#define EMAC_CTRL_C0TXIMAX (0x74U) +#define EMAC_CTRL_C1RXIMAX (0x78U) +#define EMAC_CTRL_C1TXIMAX (0x7CU) +#define EMAC_CTRL_C2RXIMAX (0x80U) +#define EMAC_CTRL_C2TXIMAX (0x84U) + +/**************************************************************************\ +* Field Definition Macros +\**************************************************************************/ + +#ifdef __cplusplus +} +#endif + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +#endif diff --git a/include/arch/rm46l8lp/halcogen/hw_mdio.h b/include/arch/rm46l8lp/halcogen/hw_mdio.h new file mode 100644 index 0000000..0f0393d --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/hw_mdio.h @@ -0,0 +1,264 @@ +/* + * hw_mdio.h + */ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef _HW_MDIO_H_ +#define _HW_MDIO_H_ + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +#define MDIO_BASE (0xFCF78900U) + +#define MDIO_REVID (0x0U) +#define MDIO_CONTROL (0x4U) +#define MDIO_ALIVE (0x8U) +#define MDIO_LINK (0xCU) +#define MDIO_LINKINTRAW (0x10U) +#define MDIO_LINKINTMASKED (0x14U) +#define MDIO_USERINTRAW (0x20U) +#define MDIO_USERINTMASKED (0x24U) +#define MDIO_USERINTMASKSET (0x28U) +#define MDIO_USERINTMASKCLEAR (0x2CU) +#define MDIO_USERACCESS0 (0x80U) +#define MDIO_USERPHYSEL0 (0x84U) +#define MDIO_USERACCESS1 (0x88U) +#define MDIO_USERPHYSEL1 (0x8CU) + +/**************************************************************************\ +* Field Definition Macros +\**************************************************************************/ + +/* REVID */ + +#define MDIO_REVID_REV (0xFFFFFFFFU) +#define MDIO_REVID_REV_SHIFT (0x00000000U) + + +/* CONTROL */ + +#define MDIO_CONTROL_IDLE (0x80000000U) +#define MDIO_CONTROL_IDLE_SHIFT (0x0000001FU) +/*----IDLE Tokens----*/ +#define MDIO_CONTROL_IDLE_NO (0x00000000U) +#define MDIO_CONTROL_IDLE_YES (0x00000001U) + +#define MDIO_CONTROL_ENABLE (0x40000000U) +#define MDIO_CONTROL_ENABLE_SHIFT (0x0000001EU) + +#define MDIO_CONTROL_HIGHEST_USER_CHANNEL (0x1F000000U) +#define MDIO_CONTROL_HIGHEST_USER_CHANNEL_SHIFT (0x00000018U) + + +#define MDIO_CONTROL_PREAMBLE (0x00100000U) +#define MDIO_CONTROL_PREAMBLE_SHIFT (0x00000014U) +/*----PREAMBLE Tokens----*/ + +#define MDIO_CONTROL_FAULT (0x00080000U) +#define MDIO_CONTROL_FAULT_SHIFT (0x00000013U) + +#define MDIO_CONTROL_FAULTENB (0x00040000U) +#define MDIO_CONTROL_FAULTENB_SHIFT (0x00000012U) +/*----FAULTENB Tokens----*/ + + + +#define MDIO_CONTROL_CLKDIV (0x0000FFFFU) +#define MDIO_CONTROL_CLKDIV_SHIFT (0x00000000U) +/*----CLKDIV Tokens----*/ + + +/* ALIVE */ + +#define MDIO_ALIVE_REGVAL (0xFFFFFFFFU) +#define MDIO_ALIVE_REGVAL_SHIFT (0x00000000U) + + +/* LINK */ + +#define MDIO_LINK_REGVAL (0xFFFFFFFFU) +#define MDIO_LINK_REGVAL_SHIFT (0x00000000U) + + +/* LINKINTRAW */ + + +#define MDIO_LINKINTRAW_USERPHY1 (0x00000002U) +#define MDIO_LINKINTRAW_USERPHY1_SHIFT (0x00000001U) + +#define MDIO_LINKINTRAW_USERPHY0 (0x00000001U) +#define MDIO_LINKINTRAW_USERPHY0_SHIFT (0x00000000U) + + +/* LINKINTMASKED */ + + +#define MDIO_LINKINTMASKED_USERPHY1 (0x00000002U) +#define MDIO_LINKINTMASKED_USERPHY1_SHIFT (0x00000001U) + +#define MDIO_LINKINTMASKED_USERPHY0 (0x00000001U) +#define MDIO_LINKINTMASKED_USERPHY0_SHIFT (0x00000000U) + + +/* USERINTRAW */ + + +#define MDIO_USERINTRAW_USERACCESS1 (0x00000002U) +#define MDIO_USERINTRAW_USERACCESS1_SHIFT (0x00000001U) + +#define MDIO_USERINTRAW_USERACCESS0 (0x00000001U) +#define MDIO_USERINTRAW_USERACCESS0_SHIFT (0x00000000U) + + +/* USERINTMASKED */ + + +#define MDIO_USERINTMASKED_USERACCESS1 (0x00000002U) +#define MDIO_USERINTMASKED_USERACCESS1_SHIFT (0x00000001U) + +#define MDIO_USERINTMASKED_USERACCESS0 (0x00000001U) +#define MDIO_USERINTMASKED_USERACCESS0_SHIFT (0x00000000U) + + +/* USERINTMASKSET */ + + +#define MDIO_USERINTMASKSET_USERACCESS1 (0x00000002U) +#define MDIO_USERINTMASKSET_USERACCESS1_SHIFT (0x00000001U) + +#define MDIO_USERINTMASKSET_USERACCESS0 (0x00000001U) +#define MDIO_USERINTMASKSET_USERACCESS0_SHIFT (0x00000000U) + + +/* USERINTMASKCLEAR */ + + +#define MDIO_USERINTMASKCLEAR_USERACCESS1 (0x00000002U) +#define MDIO_USERINTMASKCLEAR_USERACCESS1_SHIFT (0x00000001U) + +#define MDIO_USERINTMASKCLEAR_USERACCESS0 (0x00000001U) +#define MDIO_USERINTMASKCLEAR_USERACCESS0_SHIFT (0x00000000U) + + +/* USERACCESS0 */ + +#define MDIO_USERACCESS0_GO (0x80000000U) +#define MDIO_USERACCESS0_GO_SHIFT (0x0000001FU) + +#define MDIO_USERACCESS0_WRITE (0x40000000U) +#define MDIO_USERACCESS0_READ (0x00000000U) +#define MDIO_USERACCESS0_WRITE_SHIFT (0x0000001EU) + +#define MDIO_USERACCESS0_ACK (0x20000000U) +#define MDIO_USERACCESS0_ACK_SHIFT (0x0000001DU) + + +#define MDIO_USERACCESS0_REGADR (0x03E00000U) +#define MDIO_USERACCESS0_REGADR_SHIFT (0x00000015U) + +#define MDIO_USERACCESS0_PHYADR (0x001F0000U) +#define MDIO_USERACCESS0_PHYADR_SHIFT (0x00000010U) + +#define MDIO_USERACCESS0_DATA (0x0000FFFFU) +#define MDIO_USERACCESS0_DATA_SHIFT (0x00000000U) + + +/* USERPHYSEL0 */ + + +#define MDIO_USERPHYSEL0_LINKSEL (0x00000080U) +#define MDIO_USERPHYSEL0_LINKSEL_SHIFT (0x00000007U) + +#define MDIO_USERPHYSEL0_LINKINTENB (0x00000040U) +#define MDIO_USERPHYSEL0_LINKINTENB_SHIFT (0x00000006U) + + +#define MDIO_USERPHYSEL0_PHYADRMON (0x0000001FU) +#define MDIO_USERPHYSEL0_PHYADRMON_SHIFT (0x00000000U) + + +/* USERACCESS1 */ + +#define MDIO_USERACCESS1_GO (0x80000000U) +#define MDIO_USERACCESS1_GO_SHIFT (0x0000001FU) + +#define MDIO_USERACCESS1_WRITE (0x40000000U) +#define MDIO_USERACCESS1_WRITE_SHIFT (0x0000001EU) + +#define MDIO_USERACCESS1_ACK (0x20000000U) +#define MDIO_USERACCESS1_ACK_SHIFT (0x0000001DU) + + +#define MDIO_USERACCESS1_REGADR (0x03E00000U) +#define MDIO_USERACCESS1_REGADR_SHIFT (0x00000015U) + +#define MDIO_USERACCESS1_PHYADR (0x001F0000U) +#define MDIO_USERACCESS1_PHYADR_SHIFT (0x00000010U) + +#define MDIO_USERACCESS1_DATA (0x0000FFFFU) +#define MDIO_USERACCESS1_DATA_SHIFT (0x00000000U) + + +/* USERPHYSEL1 */ + + +#define MDIO_USERPHYSEL1_LINKSEL (0x00000080U) +#define MDIO_USERPHYSEL1_LINKSEL_SHIFT (0x00000007U) + +#define MDIO_USERPHYSEL1_LINKINTENB (0x00000040U) +#define MDIO_USERPHYSEL1_LINKINTENB_SHIFT (0x00000006U) + + +#define MDIO_USERPHYSEL1_PHYADRMON (0x0000001FU) +#define MDIO_USERPHYSEL1_PHYADRMON_SHIFT (0x00000000U) + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/include/arch/rm46l8lp/halcogen/hw_reg_access.h b/include/arch/rm46l8lp/halcogen/hw_reg_access.h new file mode 100644 index 0000000..428dce9 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/hw_reg_access.h @@ -0,0 +1,81 @@ +/* + * hw_reg_access.h + */ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef _HW_REG_ACCESS_H_ +#define _HW_REG_ACCESS_H_ + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/******************************************************************************* +* +* Macros for hardware access, both direct and via the bit-band region. +* +*****************************************************************************/ +#define HWREG(x) \ + (*((volatile uint32 *)(x))) +#define HWREGH(x) \ + (*((volatile uint16 *)(x))) +#define HWREGB(x) \ + (*((volatile uint8 *)(x))) +#define HWREGBITW(x, b) \ + (HWREG(((uint32)(x) & 0xF0000000U) | (uint32)0x02000000U | \ + (((uint32)(x) & 0x000FFFFFU) << 5U) | (uint32)((uint32)(b) << 2U))) +#define HWREGBITH(x, b) \ + (HWREGH(((uint32)(x) & 0xF0000000U) | (uint32)0x02000000U | \ + (((uint32)(x) & 0x000FFFFFU) << 5U) | (uint32)((uint32)(b) << 2U))) +#define HWREGBITB(x, b) \ + (HWREGB(((uint32)(x) & 0xF0000000U) | (uint32)0x02000000U | \ + (((uint32)(x) & 0x000FFFFFU) << 5U) | (uint32)((uint32)(b) << 2U))) + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +#ifdef __cplusplus +} +#endif + +#endif /* __HW_TYPES_H__ */ diff --git a/include/arch/rm46l8lp/halcogen/hw_usb.h b/include/arch/rm46l8lp/halcogen/hw_usb.h new file mode 100644 index 0000000..4baf327 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/hw_usb.h @@ -0,0 +1,276 @@ +/****************************************************************************** + * + * hw_usb.h - Macros for use in accessing the USB registers. + * +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __HW_USB_H__ +#define __HW_USB_H__ + +/** @brief Base address of memmory mapped Registers */ +#define USBD_0_BASE 0xFCF78A00u +#define USB0_BASE USBD_0_BASE + +typedef volatile struct { + uint16 rev; /* Revision */ + + /** Endpoint registers ***************************************************/ + uint16 epnum; /* Endpoint selection */ + uint16 data; /* Data */ + uint16 ctrl; /* Control */ + uint16 stat_flag; /* Status */ + uint16 rxf_stat; /* RX FIFO Status */ + uint16 syscon1; /* System configuration 1 */ + uint16 syscon2; /* System configuration 2 */ + uint16 dev_stat; /* Device status */ + uint16 sof; /* Start of frame */ + uint16 irq_en; /* Interrupt enable */ + uint16 dma_irqen; /* DMA Interrupt enable */ + uint16 irqsrc; /* Interrupt source */ + uint16 epn_stat; /* Non-ISO EP interrupt enable */ + uint16 dman_stat; /* Non-ISO DMA interrupt enable */ + uint16 _rsvd1[1]; /* Reserved for reg holes */ + + /** DMA Configuration ***************************************************/ + uint16 rxdma_cfg; /* DMA Rx channels configuration */ + uint16 txdma_cfg; /* DMA Tx channels configuration */ + uint16 data_dma; /* DMA FIFO data */ + uint16 txdma0; /* Transmit DMA control 0 */ + uint16 txdma1; /* Transmit DMA control 1 */ + uint16 txdma2; /* Transmit DMA control 2 */ + uint16 _rsvd2[2]; /* Reserved for reg holes */ + + uint16 dman_rxdma0; /* Receive DMA control 0 */ + uint16 dman_rxdma1; /* Receive DMA control 1 */ + uint16 dman_rxdma2; /* Receive DMA control 2 */ + uint16 _rsvd3[5]; /* Reserved */ + + /** Endpoint Configuration ***********************************************/ + uint16 ep0; /* Endpoint 0 Configuration */ + + uint16 epn_rx[15]; /* RX EP configurations... */ + uint16 _rsvd4[1]; /* Reserved for reg holes */ + + uint16 epn_tx[15]; /* TX EP configurations... */ +} usbdRegs; + +/******************************************************************************\ +* Register Bit Masks +* (USBD___ +\******************************************************************************/ + +/* Endpoint selection *********************************************************/ +#define USBD_EP_NUM_SETUP_SEL (0x0040u) +#define USBD_EP_NUM_EP_SEL (0x0020u) +#define USBD_EP_NUM_EP_DIR (0x0010u) +#define USBD_EP_NUM_EP_NUM_MASK (0x000Fu) + +/* Data ***********************************************************************/ +#define USBD_DATA_DATA (0xFFFFu) + +/* Control ********************************************************************/ +#define USBD_CTRL_CLR_HALT (0x0080u) +#define USBD_CTRL_SET_HALT (0x0040u) +#define USBD_CTRL_SET_FIFO_EN (0x0004u) +#define USBD_CTRL_CLR_EP (0x0002u) +#define USBD_CTRL_RESET_EP (0x0001u) + +/* Status *********************************************************************/ +#define USBD_STAT_FLG_NO_RXPACKET (0x8000u) +#define USBD_STAT_FLG_MISS_IN (0x4000u) +#define USBD_STAT_FLG_DATA_FLUSH (0x2000u) +#define USBD_STAT_FLG_ISO_ERR (0x1000u) +#define USBD_STAT_FLG_ISO_FIFO_EMPTY (0x0200u) +#define USBD_STAT_FLG_ISO_FIFO_FULL (0x0100u) +#define USBD_STAT_FLG_EP_HALTED (0x0040u) +#define USBD_STAT_FLG_STALL (0x0020u) +#define USBD_STAT_FLG_NAK (0x0010u) +#define USBD_STAT_FLG_ACK (0x0008u) +#define USBD_STAT_FLG_FIFO_EN (0x0004u) +#define USBD_STAT_FLG_NON_ISO_FIFO_EMPTY (0x0002u) +#define USBD_STAT_FLG_NON_ISO_FIFO_FULL (0x0001u) + +/* RX FIFO Status */ +#define USBD_RXFSTAT_RXF_COUNT (0x03FFu) + +/* System configuration 1 *****************************************************/ +#define USBD_SYSCON1_CFG_LOCK (0x0100u) +#define USBD_SYSCON1_DATA_ENDIAN (0x0080u) +#define USBD_SYSCON1_DMA_ENDIAN (0x0040u) +#define USBD_SYSCON1_NAK_EN (0x0010u) +#define USBD_SYSCON1_AUTODEC_DIS (0x0008u) +#define USBD_SYSCON1_SELF_PWR (0x0004u) +#define USBD_SYSCON1_SOFF_DIS (0x0002u) +#define USBD_SYSCON1_PULLUP_EN (0x0001u) + +/* System configuration 2 *****************************************************/ +#define USBD_SYSCON2_RMT_WKP (0x0040u) +#define USBD_SYSCON2_STALL_CMD (0x0020u) +#define USBD_SYSCON2_DEV_CFG (0x0008u) +#define USBD_SYSCON2_CLR_CFG (0x0004u) + +/* Device status **************************************************************/ +#define USBD_DEVSTAT_B_HNP_ENABLE (0x0200u) +#define USBD_DEVSTAT_A_HNP_SUPPORT (0x0100u) +#define USBD_DEVSTAT_A_ALT_HNP_SUPPORT (0x0080u) +#define USBD_DEVSTAT_R_WK_OK (0x0040u) +#define USBD_DEVSTAT_USB_RESET (0x0020u) +#define USBD_DEVSTAT_SUS (0x0010u) +#define USBD_DEVSTAT_CFG (0x0008u) +#define USBD_DEVSTAT_ADD (0x0004u) +#define USBD_DEVSTAT_DEF (0x0002u) +#define USBD_DEVSTAT_ATT (0x0001u) + + +/* Start of frame *************************************************************/ +#define USBD_SOF_FT_LOCK (0x1000u) +#define USBD_SOF_TS_OK (0x0800u) +#define USBD_SOF_TS (0x07FFu) + +/* Interrupt enable ***********************************************************/ +#define USBD_IRQ_EN_SOF_IE (0x0080u) +#define USBD_IRQ_EN_EPN_RX_IE (0x0020u) +#define USBD_IRQ_EN_EPN_TX_IE (0x0010u) +#define USBD_IRQ_EN_DS_CHG_IE (0x0008u) +#define USBD_IRQ_EN_EP0_IE (0x0001u) + +/* DMA Interrupt enable *******************************************************/ +#define USBD_DMA_IRQ_EN_TX2_DONE_IE (0x0400u) +#define USBD_DMA_IRQ_EN_RX2_CNT_IE (0x0200u) +#define USBD_DMA_IRQ_EN_RX2_EOT_IE (0x0100u) +#define USBD_DMA_IRQ_EN_TX1_DONE_IE (0x0040u) +#define USBD_DMA_IRQ_EN_RX1_CNT_IE (0x0020u) +#define USBD_DMA_IRQ_EN_RX1_EOT_IE (0x0010u) +#define USBD_DMA_IRQ_EN_TX0_DONE_IE (0x0004u) +#define USBD_DMA_IRQ_EN_RX0_CNT_IE (0x0002u) +#define USBD_DMA_IRQ_EN_RX0_EOT_IE (0x0001u) + +/* Interrupt source ***********************************************************/ +#define USBD_IRQ_SRC_TXN_DONE (0x0400u) +#define USBD_IRQ_SRC_RXN_CNT (0x0200u) +#define USBD_IRQ_SRC_RXN_EOT (0x0100u) +#define USBD_IRQ_SRC_SOF (0x0080u) +#define USBD_IRQ_SRC_EPN_RX (0x0020u) +#define USBD_IRQ_SRC_EPN_TX (0x0010u) +#define USBD_IRQ_SRC_DS_CHG (0x0008u) +#define USBD_IRQ_SRC_SETUP (0x0004u) +#define USBD_IRQ_SRC_EP0_RX (0x0002u) +#define USBD_IRQ_SRC_EP0_TX (0x0001u) + +/* Non-ISO endpoint interrupt enable ******************************************/ +#define USBD_EPN_STAT_RX_IT_SRC (0x0F00u) +#define USBD_EPN_STAT_TX_IT_SRC (0x000Fu) + +/* Non-ISO DMA interrupt enable ***********************************************/ +#define USBD_DMAN_STAT_RX_SB (0x1000u) +#define USBD_DMAN_STAT_RX_IT_SRC (0x0F00u) +#define USBD_DMAN_STAT_TX_IT_SRC (0x000Fu) + +/* DMA Receive channels configuration *****************************************/ +#define USBD_RXDMA_CFG_RX_REQ (0x1000u) +#define USBD_RXDMA_CFG_RXDMA2_EP (0x0F00u) +#define USBD_RXDMA_CFG_RXDMA1_EP (0x00F0u) +#define USBD_RXDMA_CFG_RXDMA0_EP (0x000Fu) + +/* DMA Transmit channels configuration ****************************************/ +#define USBD_TXDMA_CFG_TX_REQ (0x1000u) +#define USBD_TXDMA_CFG_TXDMA2_EP (0x0F00u) +#define USBD_TXDMA_CFG_TXDMA1_EP (0x00F0u) +#define USBD_TXDMA_CFG_TXDMA0_EP (0x000Fu) + +/* DMA FIFO data **************************************************************/ +#define USBD_DATA_DMA_DATA_DMA (0xFFFFu) + +/* Transmit DMA control 0 *****************************************************/ +#define USBD_TXDMA0_TX0_EOT (0x8000u) +#define USBD_TXDMA0_TX0_START (0x4000u) +#define USBD_TXDMA0_TX0_TSC (0x03FFu) + +/* Transmit DMA control 1 *****************************************************/ +#define USBD_TXDMA1_TX1_EOT (0x8000u) +#define USBD_TXDMA1_TX1_START (0x4000u) +#define USBD_TXDMA1_TX1_TSC (0x03FFu) +#define USBD_TXDMA1_TX1_TSC_SHIFT (0x0000u) + +/* Transmit DMA control 2 *****************************************************/ +#define USBD_TXDMA2_TX2_EOT (0x8000u) +#define USBD_TXDMA2_TX2_START (0x4000u) +#define USBD_TXDMA2_TX2_TSC (0x03FFu) + +/* Receive DMA control 0 ******************************************************/ +#define USBD_RXDMA0_RX0_STOP (0x8000u) +#define USBD_RXDMA0_RX0_TC (0x00FFu) + +/* Receive DMA control 1 ******************************************************/ +#define USBD_RXDMA1_RX10_STOP (0x8000u) +#define USBD_RXDMA1_RX1_TC (0x00FFu) + +/* Receive DMA control 2 ******************************************************/ +#define USBD_RXDMA2_RX2_STOP (0x8000u) +#define USBD_RXDMA2_RX2_TC (0x00FFu) + +/* Endpoint 0 Configuration ***************************************************/ +#define USBD_EP0_SIZE (0x3000u) +#define USBD_EP0_PTR (0x07FFu) + +/* Receive endpoint configurations... *****************************************/ +#define USBD_RX_EP_VALID (0x8000u) +#define USBD_RX_EP_SIZEDB (0x4000u) +#define USBD_RX_EP_SIZE (0x3000u) +#define USBD_RX_EP_ISO (0x0800u) +#define USBD_RX_EP_PTR (0x07FFu) + +/* Transmit endpoint configurations... ****************************************/ +#define USBD_TX_EP_VALID (0x8000u) +#define USBD_TX_EP_SIZEDB (0x4000u) +#define USBD_TX_EP_SIZE (0x3000u) +#define USBD_TX_EP_ISO (0x0800u) +#define USBD_TX_EP_PTR (0x07FFu) + +#define USBD_MAX_EP0_PTR (0xFFu) +#define USBD_EP_RX_MAX (15u) +#define USBD_EP_TX_MAX (15u) + +/** @brief Macro for setting a bit/s in a register (read, modify & write) */ +#define USBD_REG_BIT_SET(reg,bit) reg |= ((uint16)(bit)) +/** @brief Macro for clearing a bit/s in a register (read, modify & write) */ +#define USBD_REG_BIT_CLR(reg,bit) reg &= ((uint16)~((uint16)bit)) +/** @brief Macro for setting a bit/s in a register (write) */ +#define USBD_REG_SET_ONE(reg,value) reg = ((uint16)value) + +#endif /* __HW_USB_H__ */ diff --git a/include/arch/rm46l8lp/halcogen/i2c.h b/include/arch/rm46l8lp/halcogen/i2c.h new file mode 100644 index 0000000..f76ebcd --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/i2c.h @@ -0,0 +1,228 @@ +/** @file I2C.h +* @brief I2C Driver Definition File +* @date 11-Dec-2018 +* @version 04.07.01 +* +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __I2C_H__ +#define __I2C_H__ + +#include "reg_i2c.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/** @enum i2cMode +* @brief Alias names for i2c modes +* This enumeration is used to provide alias names for I2C modes: +*/ + +enum i2cMode +{ + I2C_FD_FORMAT = 0x0008U, /* Free Data Format */ + I2C_START_BYTE = 0x0010U, + I2C_RESET_OUT = 0x0020U, I2C_RESET_IN = 0x0000U, + I2C_DLOOPBACK = 0x0040U, + I2C_REPEATMODE = 0x0080U, /* In Master Mode only */ + I2C_10BIT_AMODE = 0x0100U, I2C_7BIT_AMODE = 0x0000U, + I2C_TRANSMITTER = 0x0200U, I2C_RECEIVER = 0x0000U, + I2C_MASTER = 0x0400U, I2C_SLAVE = 0x0000U, + I2C_STOP_COND = 0x0800U, /* In Master Mode only */ + I2C_START_COND = 0x2000U, /* In Master Mode only */ + I2C_FREE_RUN = 0x4000U, + I2C_NACK_MODE = 0x8000U +}; + + +/** @enum i2cBitCount +* @brief Alias names for i2c bit count +* This enumeration is used to provide alias names for I2C bit count: +*/ + +enum i2cBitCount +{ + I2C_2_BIT = 0x2U, + I2C_3_BIT = 0x3U, + I2C_4_BIT = 0x4U, + I2C_5_BIT = 0x5U, + I2C_6_BIT = 0x6U, + I2C_7_BIT = 0x7U, + I2C_8_BIT = 0x0U +}; + + + +/** @enum i2cIntFlags +* @brief Interrupt Flag Definitions +* +* Used with I2CEnableNotification, I2CDisableNotification +*/ +enum i2cIntFlags +{ + I2C_AL_INT = 0x0001U, /* arbitration lost */ + I2C_NACK_INT = 0x0002U, /* no acknowledgment */ + I2C_ARDY_INT = 0x0004U, /* access ready */ + I2C_RX_INT = 0x0008U, /* receive data ready */ + I2C_TX_INT = 0x0010U, /* transmit data ready */ + I2C_SCD_INT = 0x0020U, /* stop condition detect */ + I2C_AAS_INT = 0x0040U /* address as slave */ +}; + + +/** @enum i2cStatFlags +* @brief Interrupt Status Definitions +* +*/ +enum i2cStatFlags +{ + I2C_AL = 0x0001U, /* arbitration lost */ + I2C_NACK = 0x0002U, /* no acknowledgement */ + I2C_ARDY = 0x0004U, /* access ready */ + I2C_RX = 0x0008U, /* receive data ready */ + I2C_TX = 0x0010U, /* transmit data ready */ + I2C_SCD = 0x0020U, /* stop condition detect */ + I2C_AD0 = 0x0100U, /* address Zero Status */ + I2C_AAS = 0x0200U, /* address as slave */ + I2C_XSMT = 0x0400U, /* Transmit shift empty not */ + I2C_RXFULL = 0x0800U, /* receive full */ + I2C_BUSBUSY = 0x1000U, /* bus busy */ + I2C_NACKSNT = 0x2000U, /* No Ack Sent */ + I2C_SDIR = 0x4000U /* Slave Direction */ +}; + + +/** @enum i2cDMA +* @brief I2C DMA definitions +* +* Used before i2c transfer +*/ +enum i2cDMA +{ + I2C_TXDMA = 0x20U, + I2C_RXDMA = 0x10U +}; + +/* Configuration registers */ +typedef struct i2c_config_reg +{ + uint32 CONFIG_OAR; + uint32 CONFIG_IMR; + uint32 CONFIG_CLKL; + uint32 CONFIG_CLKH; + uint32 CONFIG_CNT; + uint32 CONFIG_SAR; + uint32 CONFIG_MDR; + uint32 CONFIG_EMDR; + uint32 CONFIG_PSC; + uint32 CONFIG_DMAC; + uint32 CONFIG_FUN; + uint32 CONFIG_DIR; + uint32 CONFIG_ODR; + uint32 CONFIG_PD; + uint32 CONFIG_PSL; +} i2c_config_reg_t; + + +/** + * @defgroup I2C I2C + * @brief Inter-Integrated Circuit Module. + * + * The I2C is a multi-master communication module providing an interface between the Texas Instruments (TI) microcontroller + * and devices compliant with Philips Semiconductor I2C-bus specification version 2.1 and connected by an I2Cbus. + * This module will support any slave or master I2C compatible device. + * + * Related Files + * - reg_i2c.h + * - i2c.h + * - i2c.c + * @addtogroup I2C + * @{ + */ + +/* I2C Interface Functions */ +void i2cInit(void); +void i2cSetOwnAdd(i2cBASE_t *i2c, uint32 oadd); +void i2cSetSlaveAdd(i2cBASE_t *i2c, uint32 sadd); +void i2cSetBaudrate(i2cBASE_t *i2c, uint32 baud); +uint32 i2cIsTxReady(i2cBASE_t *i2c); +void i2cSendByte(i2cBASE_t *i2c, uint8 byte); +void i2cSend(i2cBASE_t *i2c, uint32 length, uint8 * data); +uint32 i2cIsRxReady(i2cBASE_t *i2c); +uint32 i2cIsStopDetected(i2cBASE_t *i2c); +void i2cClearSCD(i2cBASE_t *i2c); +uint32 i2cRxError(i2cBASE_t *i2c); +uint8 i2cReceiveByte(i2cBASE_t *i2c); +void i2cReceive(i2cBASE_t *i2c, uint32 length, uint8 * data); +void i2cEnableNotification(i2cBASE_t *i2c, uint32 flags); +void i2cDisableNotification(i2cBASE_t *i2c, uint32 flags); +void i2cSetStart(i2cBASE_t *i2c); +void i2cSetStop(i2cBASE_t *i2c); +void i2cSetCount(i2cBASE_t *i2c ,uint32 cnt); +void i2cEnableLoopback(i2cBASE_t *i2c); +void i2cDisableLoopback(i2cBASE_t *i2c); +void i2cSetMode(i2cBASE_t *i2c, uint32 mode); +void i2cGetConfigValue(i2c_config_reg_t *config_reg, config_value_type_t type); +void i2cSetDirection(i2cBASE_t *i2c, uint32 dir); +bool i2cIsMasterReady(i2cBASE_t *i2c); +bool i2cIsBusBusy(i2cBASE_t *i2c); + +/** @fn void i2cNotification(i2cBASE_t *i2c, uint32 flags) +* @brief Interrupt callback +* @param[in] i2c - I2C module base address +* @param[in] flags - copy of error interrupt flags +* +* This is a callback that is provided by the application and is called apon +* an interrupt. The parameter passed to the callback is a copy of the +* interrupt flag register. +*/ +void i2cNotification(i2cBASE_t *i2c, uint32 flags); + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/**@}*/ +#ifdef __cplusplus +} +#endif /*extern "C" */ + +#endif diff --git a/include/arch/rm46l8lp/halcogen/lin.h b/include/arch/rm46l8lp/halcogen/lin.h new file mode 100644 index 0000000..bc82bfe --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/lin.h @@ -0,0 +1,333 @@ +/** @file lin.h +* @brief LIN Driver Definition File +* @date 11-Dec-2018 +* @version 04.07.01 +* +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + + +#ifndef __LIN_H__ +#define __LIN_H__ + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +#include "reg_lin.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/** @def LIN_BREAK_INT +* @brief Alias for break detect interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_BREAK_INT 0x00000001U + + +/** @def LIN_WAKEUP_INT +* @brief Alias for wakeup interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_WAKEUP_INT 0x00000002U + + +/** @def LIN_TO_INT +* @brief Alias for time out interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_TO_INT 0x00000010U + + +/** @def LIN_TOAWUS_INT +* @brief Alias for time out after wakeup signal interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_TOAWUS_INT 0x00000040U + + +/** @def LIN_TOA3WUS_INT +* @brief Alias for time out after 3 wakeup signals interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_TOA3WUS_INT 0x00000080U + + +/** @def LIN_TX_READY +* @brief Alias for transmit buffer ready flag +* +* Used with linIsTxReady. +*/ +#define LIN_TX_READY 0x00000100U + + +/** @def LIN_RX_INT +* @brief Alias for receive buffer ready interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_RX_INT 0x00000200U + + +/** @def LIN_ID_INT +* @brief Alias for received matching identifier interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_ID_INT 0x00002000U + + +/** @def LIN_PE_INT +* @brief Alias for parity error interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_PE_INT 0x01000000U + + +/** @def LIN_OE_INT +* @brief Alias for overrun error interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_OE_INT 0x02000000U + + +/** @def LIN_FE_INT +* @brief Alias for framing error interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_FE_INT 0x04000000U + + +/** @def LIN_NRE_INT +* @brief Alias for no response error interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_NRE_INT 0x08000000U + + +/** @def LIN_ISFE_INT +* @brief Alias for inconsistent sync field error interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_ISFE_INT 0x10000000U + + +/** @def LIN_CE_INT +* @brief Alias for checksum error interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_CE_INT 0x20000000U + + +/** @def LIN_PBE_INT +* @brief Alias for physical bus error interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_PBE_INT 0x40000000U + + +/** @def LIN_BE_INT +* @brief Alias for bit error interrupt flag +* +* Used with linEnableNotification, linDisableNotification. +*/ +#define LIN_BE_INT 0x80000000U + + +/** @struct linBase +* @brief LIN Register Definition +* +* This structure is used to access the LIN module registers. +*/ +/** @typedef linBASE_t +* @brief LIN Register Frame Type Definition +* +* This type is used to access the LIN Registers. +*/ + +enum linPinSelect +{ + PIN_LIN_TX = 4U, + PIN_LIN_RX = 2U +}; + +/* Configuration registers */ +typedef struct lin_config_reg +{ + uint32 CONFIG_GCR0; + uint32 CONFIG_GCR1; + uint32 CONFIG_GCR2; + uint32 CONFIG_SETINT; + uint32 CONFIG_SETINTLVL; + uint32 CONFIG_FORMAT; + uint32 CONFIG_BRSR; + uint32 CONFIG_FUN; + uint32 CONFIG_DIR; + uint32 CONFIG_ODR; + uint32 CONFIG_PD; + uint32 CONFIG_PSL; + uint32 CONFIG_COMP; + uint32 CONFIG_MASK; + uint32 CONFIG_MBRSR; +} lin_config_reg_t; + +/* Configuration registers initial value for LIN*/ +#define LIN_GCR0_CONFIGVALUE 0x00000001U +#define LIN_GCR1_CONFIGVALUE (0x03000CC0U \ + | (uint32)((uint32)1U << 12U) \ + | (uint32)((uint32)0U << 2U)\ + | (uint32)((uint32)1U << 5U)) +#define LIN_GCR2_CONFIGVALUE 0x00000000U +#define LIN_SETINTLVL_CONFIGVALUE (0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U) + +#define LIN_SETINT_CONFIGVALUE (0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U) + +#define LIN_FORMAT_CONFIGVALUE ((uint32)((uint32)(8U - 1U) << 16U)) +#define LIN_BRSR_CONFIGVALUE (249U) +#define LIN_COMP_CONFIGVALUE ((uint32)((uint32)(1U - 1U) << 8U) | (13U - 13U)) +#define LIN_MASK_CONFIGVALUE ((uint32)((uint32)0xFFU << 16U) | 0xFFU) +#define LIN_MBRSR_CONFIGVALUE (3600U) +#define LIN_FUN_CONFIGVALUE (4U | 2U | 0U) +#define LIN_DIR_CONFIGVALUE (0U | 0U | 0U) +#define LIN_ODR_CONFIGVALUE (0U | 0U | 0U) +#define LIN_PD_CONFIGVALUE (0U | 0U | 0U) +#define LIN_PSL_CONFIGVALUE (4U | 2U | 1U) + +/** + * @defgroup LIN LIN + * @brief Local Interconnect Network Module. + * + * The LIN standard is based on the SCI (UART) serial data link format. The communication concept is + * single-master/multiple-slave with a message identification for multi-cast transmission between any network + * nodes. + * + * Related Files + * - reg_lin.h + * - lin.h + * - lin.c + * @addtogroup LIN + * @{ + */ + +/* LIN Interface Functions */ +void linInit(void); +void linSetFunctional(linBASE_t *lin, uint32 port); +void linSendHeader(linBASE_t *lin, uint8 identifier); +void linSendWakupSignal(linBASE_t *lin); +void linEnterSleep(linBASE_t *lin); +void linSoftwareReset(linBASE_t *lin); +uint32 linIsTxReady(linBASE_t *lin); +void linSetLength(linBASE_t *lin, uint32 length); +void linSend(linBASE_t *lin, uint8 * data); +uint32 linIsRxReady(linBASE_t *lin); +uint32 linTxRxError(linBASE_t *lin); +uint32 linGetIdentifier(linBASE_t *lin); +void linGetData(linBASE_t *lin, uint8 * const data); +void linEnableNotification(linBASE_t *lin, uint32 flags); +void linDisableNotification(linBASE_t *lin, uint32 flags); +void linEnableLoopback(linBASE_t *lin, loopBackType_t Loopbacktype); +void linDisableLoopback(linBASE_t *lin); +void linGetConfigValue(lin_config_reg_t *config_reg, config_value_type_t type); +uint32 linGetStatusFlag(linBASE_t *lin); +void linClearStatusFlag(linBASE_t *lin, uint32 flags); + +/** @fn void linNotification(linBASE_t *lin, uint32 flags) +* @brief Interrupt callback +* @param[in] lin - lin module base address +* @param[in] flags - copy of error interrupt flags +* +* This is a callback that is provided by the application and is called upon +* an interrupt. The parameter passed to the callback is a copy of the +* interrupt flag register. +*/ +void linNotification(linBASE_t *lin, uint32 flags); + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +/**@}*/ +#ifdef __cplusplus +} +#endif + +#endif diff --git a/include/arch/rm46l8lp/halcogen/mdio.h b/include/arch/rm46l8lp/halcogen/mdio.h new file mode 100644 index 0000000..6a76e6e --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/mdio.h @@ -0,0 +1,92 @@ +/** + * \file mdio.h + * + * \brief MDIO APIs and macros. + * + * This file contains the driver API prototypes and macro definitions. + */ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __MDIO_H__ +#define __MDIO_H__ + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +#include "sys_common.h" +#include "system.h" +#include "hw_mdio.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/* MDIO input and output frequencies in Hz */ +#define MDIO_FREQ_INPUT ((uint32)(VCLK3_FREQ * 1000000.00F)) +#define MDIO_FREQ_OUTPUT 1000000U +/*****************************************************************************/ + +/** + * @addtogroup EMACMDIO + * @{ + */ +/* +** Prototypes for the APIs +*/ +extern uint32 MDIOPhyAliveStatusGet(uint32 baseAddr); +extern uint32 MDIOPhyLinkStatusGet(uint32 baseAddr); +extern void MDIOInit(uint32 baseAddr, uint32 mdioInputFreq, + uint32 mdioOutputFreq); +extern boolean MDIOPhyRegRead(uint32 baseAddr, uint32 phyAddr, + uint32 regNum, volatile uint16 * dataPtr); +extern void MDIOPhyRegWrite(uint32 baseAddr, uint32 phyAddr, + uint32 regNum, uint16 RegVal); +extern void MDIOEnable(uint32 baseAddr); +extern void MDIODisable(uint32 baseAddr); + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +#ifdef __cplusplus +} +#endif + +/**@}*/ +#endif /* __MDIO_H__ */ diff --git a/include/arch/rm46l8lp/halcogen/mibspi.h b/include/arch/rm46l8lp/halcogen/mibspi.h new file mode 100644 index 0000000..60c44ae --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/mibspi.h @@ -0,0 +1,287 @@ +/** @file mibspi.h +* @brief MIBSPI Driver Definition File +* @date 11-Dec-2018 +* @version 04.07.01 +* +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + + +#ifndef __MIBSPI_H__ +#define __MIBSPI_H__ + +#include "reg_mibspi.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/** @enum triggerEvent +* @brief Transfer Group Trigger Event +*/ +enum triggerEvent +{ + TRG_NEVER = 0U, + TRG_RISING = 1U, + TRG_FALLING = 2U, + TRG_BOTH = 3U, + TRG_HIGH = 5U, + TRG_LOW = 6U, + TRG_ALWAYS = 7U +}; + +/** @enum triggerSource +* @brief Transfer Group Trigger Source +*/ +enum triggerSource +{ + TRG_DISABLED, + TRG_GIOA0, + TRG_GIOA1, + TRG_GIOA2, + TRG_GIOA3, + TRG_GIOA4, + TRG_GIOA5, + TRG_GIOA6, + TRG_GIOA7, + TRG_HET1_8, + TRG_HET1_10, + TRG_HET1_12, + TRG_HET1_14, + TRG_HET1_16, + TRG_HET1_18, + TRG_TICK +}; + + +/** @enum mibspiPinSelect +* @brief mibspi Pin Select +*/ +enum mibspiPinSelect +{ + PIN_CS0 = 0U, + PIN_CS1 = 1U, + PIN_CS2 = 2U, + PIN_CS3 = 3U, + PIN_CS4 = 4U, + PIN_CS5 = 5U, + PIN_CS6 = 6U, + PIN_CS7 = 7U, + PIN_ENA = 8U, + PIN_CLK = 9U, + PIN_SIMO = 10U, + PIN_SOMI = 11U, + PIN_SIMO_1 = 17U, + PIN_SIMO_2 = 18U, + PIN_SIMO_3 = 19U, + PIN_SIMO_4 = 20U, + PIN_SIMO_5 = 21U, + PIN_SIMO_6 = 22U, + PIN_SIMO_7 = 23U, + PIN_SOMI_1 = 25U, + PIN_SOMI_2 = 26U, + PIN_SOMI_3 = 27U, + PIN_SOMI_4 = 28U, + PIN_SOMI_5 = 29U, + PIN_SOMI_6 = 30U, + PIN_SOMI_7 = 31U +}; + + +/** @enum chipSelect +* @brief Transfer Group Chip Select +*/ +enum chipSelect +{ + CS_NONE = 0xFFU, + CS_0 = 0xFEU, + CS_1 = 0xFDU, + CS_2 = 0xFBU, + CS_3 = 0xF7U, + CS_4 = 0xEFU, + CS_5 = 0xDFU, + CS_6 = 0xBFU, + CS_7 = 0x7FU +}; + +/** @typedef mibspiPmode_t +* @brief Mibspi Parellel mode Type Definition +* +* This type is used to represent Mibspi Parellel mode. +*/ +typedef enum mibspiPmode +{ + PMODE_NORMAL = 0x0U, + PMODE_2_DATALINE = 0x1U, + PMODE_4_DATALINE = 0x2U, + PMODE_8_DATALINE = 0x3U +}mibspiPmode_t; + +/** @typedef mibspiDFMT_t +* @brief Mibspi Data format selection Type Definition +* +* This type is used to represent Mibspi Data format selection. +*/ +typedef enum mibspiDFMT +{ + DATA_FORMAT0 = 0x0U, + DATA_FORMAT1 = 0x1U, + DATA_FORMAT2 = 0x2U, + DATA_FORMAT3 = 0x3U +}mibspiDFMT_t; + +typedef struct mibspi_config_reg +{ + uint32 CONFIG_GCR1; + uint32 CONFIG_INT0; + uint32 CONFIG_LVL; + uint32 CONFIG_PCFUN; + uint32 CONFIG_PCDIR; + uint32 CONFIG_PCPDR; + uint32 CONFIG_PCDIS; + uint32 CONFIG_PCPSL; + uint32 CONFIG_DELAY; + uint32 CONFIG_FMT0; + uint32 CONFIG_FMT1; + uint32 CONFIG_FMT2; + uint32 CONFIG_FMT3; + uint32 CONFIG_MIBSPIE; + uint32 CONFIG_LTGPEND; + uint32 CONFIG_TGCTRL[8U]; + uint32 CONFIG_UERRCTRL; +}mibspi_config_reg_t; + + + +#define MIBSPI3_GCR1_CONFIGVALUE (0x01000000U | (uint32)((uint32)1U << 1U) | 1U) +#define MIBSPI3_INT0_CONFIGVALUE ((uint32)((uint32)0U << 24U) | (uint32)((uint32)0U << 9U) | (uint32)((uint32)0U << 8U) | (uint32)((uint32)0U << 6U) | (uint32)((uint32)0U << 4U) | (uint32)((uint32)0U << 3U) | (uint32)((uint32)0U << 2U) | (uint32)((uint32)0U << 1U) | (uint32)((uint32)0U << 0U)) +#define MIBSPI3_LVL_CONFIGVALUE ((uint32)((uint32)0U << 9U) | (uint32)((uint32)0U << 8U) | (uint32)((uint32)0U << 6U) | (uint32)((uint32)0U << 4U) | (uint32)((uint32)0U << 3U) | (uint32)((uint32)0U << 2U) | (uint32)((uint32)0U << 1U) | (uint32)((uint32)0U << 0U)) + +#define MIBSPI3_PCFUN_CONFIGVALUE ((uint32)((uint32)0U << 0U) | (uint32)((uint32)0U << 1U) | (uint32)((uint32)0U << 2U) | (uint32)((uint32)0U << 3U) | (uint32)((uint32)0U << 4U) | (uint32)((uint32)0U << 5U) | (uint32)((uint32)1U << 8U) | (uint32)((uint32)1U << 9U) | (uint32)((uint32)1U << 10U) | (uint32)((uint32)1U << 16U) | (uint32)((uint32)1U << 11U) | (uint32)((uint32)1U << 24U)) +#define MIBSPI3_PCDIR_CONFIGVALUE ((uint32)((uint32)0U << 0U) | (uint32)((uint32)1U << 1U) | (uint32)((uint32)1U << 2U) | (uint32)((uint32)1U << 3U) | (uint32)((uint32)1U << 4U) | (uint32)((uint32)1U << 5U) | (uint32)((uint32)0U << 8U) | (uint32)((uint32)1U << 9U) | (uint32)((uint32)1U << 10U) | (uint32)((uint32)1U << 16U) | (uint32)((uint32)0U << 11U) | (uint32)((uint32)0U << 24U)) +#define MIBSPI3_PCPDR_CONFIGVALUE ((uint32)((uint32)0U << 0U) | (uint32)((uint32)0U << 1U) | (uint32)((uint32)0U << 2U) | (uint32)((uint32)0U << 3U) | (uint32)((uint32)0U << 4U) | (uint32)((uint32)0U << 5U) | (uint32)((uint32)0U << 8U) | (uint32)((uint32)0U << 9U) | (uint32)((uint32)0U << 10U) | (uint32)((uint32)0U << 16U) | (uint32)((uint32)0U << 11U) | (uint32)((uint32)0U << 24U)) +#define MIBSPI3_PCDIS_CONFIGVALUE ((uint32)((uint32)0U << 0U) | (uint32)((uint32)0U << 1U) | (uint32)((uint32)0U << 2U) | (uint32)((uint32)0U << 3U) | (uint32)((uint32)0U << 4U) | (uint32)((uint32)0U << 5U) | (uint32)((uint32)0U << 8U) | (uint32)((uint32)0U << 9U) | (uint32)((uint32)0U << 10U) | (uint32)((uint32)0U << 16U) | (uint32)((uint32)0U << 11U) | (uint32)((uint32)0U << 24U)) +#define MIBSPI3_PCPSL_CONFIGVALUE ((uint32)((uint32)1U << 0U) | (uint32)((uint32)1U << 1U) | (uint32)((uint32)1U << 2U) | (uint32)((uint32)1U << 3U) | (uint32)((uint32)1U << 4U) | (uint32)((uint32)1U << 5U) | (uint32)((uint32)1U << 8U) | (uint32)((uint32)1U << 9U) | (uint32)((uint32)1U << 10U) | (uint32)((uint32)1U << 16U) | (uint32)((uint32)1U << 11U) | (uint32)((uint32)1U << 24U)) + +#define MIBSPI3_DELAY_CONFIGVALUE ((uint32)((uint32)0U << 24U) | (uint32)((uint32)0U << 16U) | (uint32)((uint32)0U << 8U) | (uint32)((uint32)0U << 0U)) + +#define MIBSPI3_FMT0_CONFIGVALUE ((uint32)((uint32)0U << 24U) | (uint32)((uint32)0U << 23U) | (uint32)((uint32)0U << 22U) | (uint32)((uint32)0U << 21U) | (uint32)((uint32)0U << 20U) | (uint32)((uint32)0U << 17U) | (uint32)((uint32)0U << 16U) | (uint32)((uint32)79U << 8U) | (uint32)((uint32)16U << 0U)) +#define MIBSPI3_FMT1_CONFIGVALUE ((uint32)((uint32)0U << 24U) | (uint32)((uint32)0U << 23U) | (uint32)((uint32)0U << 22U) | (uint32)((uint32)0U << 21U) | (uint32)((uint32)0U << 20U) | (uint32)((uint32)0U << 17U) | (uint32)((uint32)0U << 16U) | (uint32)((uint32)79U << 8U) | (uint32)((uint32)16U << 0U)) +#define MIBSPI3_FMT2_CONFIGVALUE ((uint32)((uint32)0U << 24U) | (uint32)((uint32)0U << 23U) | (uint32)((uint32)0U << 22U) | (uint32)((uint32)0U << 21U) | (uint32)((uint32)0U << 20U) | (uint32)((uint32)0U << 17U) | (uint32)((uint32)0U << 16U) | (uint32)((uint32)79U << 8U) | (uint32)((uint32)16U << 0U)) +#define MIBSPI3_FMT3_CONFIGVALUE ((uint32)((uint32)0U << 24U) | (uint32)((uint32)0U << 23U) | (uint32)((uint32)0U << 22U) | (uint32)((uint32)0U << 21U) | (uint32)((uint32)0U << 20U) | (uint32)((uint32)0U << 17U) | (uint32)((uint32)0U << 16U) | (uint32)((uint32)79U << 8U) | (uint32)((uint32)16U << 0U)) + +#define MIBSPI3_MIBSPIE_CONFIGVALUE 1U +#define MIBSPI3_LTGPEND_CONFIGVALUE ((uint32)((uint32)((8U+0U+0U+0U+0U+0U+0U+0U)-1U) << 8U)) + +#define MIBSPI3_TGCTRL0_CONFIGVALUE (0xFFFF7FFFU & ((uint32)((uint32)1U << 30U) | (uint32)((uint32)0U << 29U) | (uint32)((uint32)TRG_ALWAYS << 20U) | (uint32)((uint32)TRG_DISABLED << 16U) | (uint32)((uint32)0U << 8U))) +#define MIBSPI3_TGCTRL1_CONFIGVALUE (0xFFFF7FFFU & ((uint32)((uint32)1U << 30U) | (uint32)((uint32)0U << 29U) | (uint32)((uint32)TRG_ALWAYS << 20U) | (uint32)((uint32)TRG_DISABLED << 16U) | (uint32)((uint32)8U << 8U))) +#define MIBSPI3_TGCTRL2_CONFIGVALUE (0xFFFF7FFFU & ((uint32)((uint32)1U << 30U) | (uint32)((uint32)0U << 29U) | (uint32)((uint32)TRG_ALWAYS << 20U) | (uint32)((uint32)TRG_DISABLED << 16U) | (uint32)((uint32)(8U+0U) << 8U))) +#define MIBSPI3_TGCTRL3_CONFIGVALUE (0xFFFF7FFFU & ((uint32)((uint32)1U << 30U) | (uint32)((uint32)0U << 29U) | (uint32)((uint32)TRG_ALWAYS << 20U) | (uint32)((uint32)TRG_DISABLED << 16U) | (uint32)((uint32)(8U+0U+0U) << 8U))) +#define MIBSPI3_TGCTRL4_CONFIGVALUE (0xFFFF7FFFU & ((uint32)((uint32)1U << 30U) | (uint32)((uint32)0U << 29U) | (uint32)((uint32)TRG_ALWAYS << 20U) | (uint32)((uint32)TRG_DISABLED << 16U) | (uint32)((uint32)(8U+0U+0U+0U) << 8U))) +#define MIBSPI3_TGCTRL5_CONFIGVALUE (0xFFFF7FFFU & ((uint32)((uint32)1U << 30U) | (uint32)((uint32)0U << 29U) | (uint32)((uint32)TRG_ALWAYS << 20U) | (uint32)((uint32)TRG_DISABLED << 16U) | (uint32)((uint32)(8U+0U+0U+0U+0U) << 8U))) +#define MIBSPI3_TGCTRL6_CONFIGVALUE (0xFFFF7FFFU & ((uint32)((uint32)1U << 30U) | (uint32)((uint32)0U << 29U) | (uint32)((uint32)TRG_ALWAYS << 20U) | (uint32)((uint32)TRG_DISABLED << 16U) | (uint32)((uint32)(8U+0U+0U+0U+0U+0U) << 8U))) +#define MIBSPI3_TGCTRL7_CONFIGVALUE (0xFFFF7FFFU & ((uint32)((uint32)1U << 30U) | (uint32)((uint32)0U << 29U) | (uint32)((uint32)TRG_ALWAYS << 20U) | (uint32)((uint32)TRG_DISABLED << 16U) | (uint32)((uint32)(8U+0U+0U+0U+0U+0U+0U) << 8U))) + +#define MIBSPI3_UERRCTRL_CONFIGVALUE (0x00000005U) + + +/** + * @defgroup MIBSPI MIBSPI + * @brief Multi-Buffered Serial Peripheral Interface Module. + * + * The MibSPI/MibSPIP is a high-speed synchronous serial input/output port that allows a serial bit stream of + * programmed length (2 to 16 bits) to be shifted in and out of the device at a programmed bit-transfer rate. + * The MibSPI has a programmable buffer memory that enables programmed transmission to be completed + * without CPU intervention + * + * Related Files + * - reg_mibspi.h + * - mibspi.h + * - mibspi.c + * @addtogroup MIBSPI + * @{ + */ + +/* MIBSPI Interface Functions */ +void mibspiInit(void); +void mibspiSetFunctional(mibspiBASE_t *mibspi, uint32 port); +void mibspiSetData(mibspiBASE_t *mibspi, uint32 group, uint16 * data); +uint32 mibspiGetData(mibspiBASE_t *mibspi, uint32 group, uint16 * data); +void mibspiTransfer(mibspiBASE_t *mibspi, uint32 group); +boolean mibspiIsTransferComplete(mibspiBASE_t *mibspi, uint32 group); +void mibspiEnableGroupNotification(mibspiBASE_t *mibspi, uint32 group, uint32 level); +void mibspiDisableGroupNotification(mibspiBASE_t *mibspi, uint32 group); +void mibspiEnableLoopback(mibspiBASE_t *mibspi, loopBackType_t Loopbacktype); +void mibspiDisableLoopback(mibspiBASE_t *mibspi); +void mibspiPmodeSet(mibspiBASE_t *mibspi, mibspiPmode_t Pmode, mibspiDFMT_t DFMT); +void mibspi3GetConfigValue(mibspi_config_reg_t *config_reg, config_value_type_t type); + +/** @fn void mibspiNotification(mibspiBASE_t *mibspi, uint32 flags) +* @brief Error interrupt callback +* @param[in] mibspi - mibSpi module base address +* @param[in] flags - Copy of error interrupt flags +* +* This is a error callback that is provided by the application and is call upon +* an error interrupt. The paramer passed to the callback is a copy of the error +* interrupt flag register. +*/ +void mibspiNotification(mibspiBASE_t *mibspi, uint32 flags); + + +/** @fn void mibspiGroupNotification(mibspiBASE_t *mibspi, uint32 group) +* @brief Transfer complete notification callback +* @param[in] mibspi - mibSpi module base address +* @param[in] group - Transfer group +* +* This is a callback function provided by the application. It is call when +* a transfer is complete. The parameter is the transfer group that triggered +* the interrupt. +*/ +void mibspiGroupNotification(mibspiBASE_t *mibspi, uint32 group); + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/**@}*/ +#ifdef __cplusplus +} +#endif + +#endif diff --git a/include/arch/rm46l8lp/halcogen/phy_dp83640.h b/include/arch/rm46l8lp/halcogen/phy_dp83640.h new file mode 100644 index 0000000..e42aea6 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/phy_dp83640.h @@ -0,0 +1,132 @@ +/* + * DP83640.h + */ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef _PHY_DP83640_H_ +#define _PHY_DP83640_H_ + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/** @enum PHY_timestamp +* @brief Alias names for transmit and receive timestamps +* This enumeration is used to provide alias names for getting the transmit and receive timestamps from the Dp83640GetTimeStamp API. +*/ +typedef enum phyTimeStamp +{ + Txtimestamp = 1, /*Transmit Timestamp*/ + Rxtimestamp = 2 /*Receive Timestamp */ +}phyTimeStamp_t; +/* PHY register offset definitions */ +#define PHY_BCR (0u) +#define PHY_BSR (1u) +#define PHY_ID1 (2u) +#define PHY_ID2 (3u) +#define PHY_AUTONEG_ADV (4u) +#define PHY_LINK_PARTNER_ABLTY (5u) +#define PHY_LINK_PARTNER_SPD (16u) +#define PHY_TXTS (28u) +#define PHY_RXTS (29u) + +/* PHY status definitions */ +#define PHY_ID_SHIFT (16u) +#define PHY_SOFTRESET (0x8000U) +#define PHY_AUTONEG_ENABLE (0x1000u) +#define PHY_AUTONEG_RESTART (0x0200u) +#define PHY_AUTONEG_COMPLETE (0x0020u) +#define PHY_AUTONEG_INCOMPLETE (0x0000u) +#define PHY_AUTONEG_STATUS (0x0020u) +#define PHY_AUTONEG_ABLE (0x0008u) +#define PHY_LPBK_ENABLE (0x4000u) +#define PHY_LINK_STATUS (0x0004u) +#define PHY_INVALID_TYPE (0x0u) + + +/* PHY ID. The LSB nibble will vary between different phy revisions */ +#define DP83640_PHY_ID (0x0007C0F0u) +#define DP83640_PHY_ID_REV_MASK (0x0000000Fu) + +/* Pause operations */ +#define DP83640_PAUSE_NIL (0x0000u) +#define DP83640_PAUSE_SYM (0x0400u) +#define DP83640_PAUSE_ASYM (0x0800u) +#define DP83640_PAUSE_BOTH_SYM_ASYM (0x0C00u) + +/* 100 Base TX Full Duplex capablity */ +#define DP83640_100BTX_HD (0x0000u) +#define DP83640_100BTX_FD (0x0100u) + +/* 100 Base TX capability */ +#define DP83640_NO_100BTX (0x0000u) +#define DP83640_100BTX (0x0080u) + +/* 10 BaseT duplex capabilities */ +#define DP83640_10BT_HD (0x0000u) +#define DP83640_10BT_FD (0x0040u) + +/* 10 BaseT ability*/ +#define DP83640_NO_10BT (0x0000u) +#define DP83640_10BT (0x0020u) + +/************************************************************************** + API function Prototypes +***************************************************************************/ +extern uint32 Dp83640IDGet(uint32 mdioBaseAddr, uint32 phyAddr); +extern void Dp83640Reset(uint32 mdioBaseAddr, uint32 phyAddr); +extern boolean Dp83640AutoNegotiate(uint32 mdioBaseAddr, uint32 phyAddr, uint16 advVal); +extern boolean Dp83640PartnerAbilityGet(uint32 mdioBaseAddr, uint32 phyAddr,uint16 *ptnerAblty); +extern boolean Dp83640LinkStatusGet(uint32 mdioBaseAddr, uint32 phyAddr,volatile uint32 retries); +extern uint64 Dp83640GetTimeStamp(uint32 mdioBaseAddr, uint32 phyAddr, phyTimeStamp_t type); +extern void Dp83640EnableLoopback(uint32 mdioBaseAddr, uint32 phyAddr); +extern void Dp83640DisableLoopback(uint32 mdioBaseAddr, uint32 phyAddr); +extern boolean Dp83640PartnerSpdGet(uint32 mdioBaseAddr, uint32 phyAddr, uint16 *ptnerAblty); + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +#ifdef __cplusplus +} +#endif +#endif diff --git a/include/arch/rm46l8lp/halcogen/pinmux.h b/include/arch/rm46l8lp/halcogen/pinmux.h new file mode 100644 index 0000000..547acd1 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/pinmux.h @@ -0,0 +1,575 @@ +/** @file pinmux.h +* @brief PINMUX Driver Implementation File +* @date 11-Dec-2018 +* @version 04.07.01 +* +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __PINMUX_H__ +#define __PINMUX_H__ + +#include "reg_pinmux.h" + +#ifdef __cplusplus +extern "C" { +#endif + + +#define PINMUX_PIN_1_SHIFT 0U +#define PINMUX_PIN_2_SHIFT 8U +#define PINMUX_PIN_3_SHIFT 16U +#define PINMUX_PIN_4_SHIFT 24U +#define PINMUX_PIN_5_SHIFT 0U +#define PINMUX_PIN_6_SHIFT 8U +#define PINMUX_PIN_9_SHIFT 0U +#define PINMUX_PIN_14_SHIFT 24U +#define PINMUX_PIN_15_SHIFT 8U +#define PINMUX_PIN_16_SHIFT 16U +#define PINMUX_PIN_22_SHIFT 0U +#define PINMUX_PIN_23_SHIFT 16U +#define PINMUX_PIN_24_SHIFT 24U +#define PINMUX_PIN_25_SHIFT 0U +#define PINMUX_PIN_30_SHIFT 8U +#define PINMUX_PIN_31_SHIFT 16U +#define PINMUX_PIN_32_SHIFT 0U +#define PINMUX_PIN_33_SHIFT 0U +#define PINMUX_PIN_35_SHIFT 16U +#define PINMUX_PIN_36_SHIFT 0U +#define PINMUX_PIN_37_SHIFT 8U +#define PINMUX_PIN_38_SHIFT 16U +#define PINMUX_PIN_39_SHIFT 0U +#define PINMUX_PIN_40_SHIFT 8U +#define PINMUX_PIN_41_SHIFT 16U +#define PINMUX_PIN_51_SHIFT 8U +#define PINMUX_PIN_52_SHIFT 16U +#define PINMUX_PIN_53_SHIFT 24U +#define PINMUX_PIN_54_SHIFT 8U +#define PINMUX_PIN_55_SHIFT 16U +#define PINMUX_PIN_86_SHIFT 0U +#define PINMUX_PIN_91_SHIFT 24U +#define PINMUX_PIN_92_SHIFT 0U +#define PINMUX_PIN_96_SHIFT 16U +#define PINMUX_PIN_97_SHIFT 24U +#define PINMUX_PIN_98_SHIFT 0U +#define PINMUX_PIN_99_SHIFT 8U +#define PINMUX_PIN_100_SHIFT 16U +#define PINMUX_PIN_105_SHIFT 24U +#define PINMUX_PIN_106_SHIFT 0U +#define PINMUX_PIN_107_SHIFT 8U +#define PINMUX_PIN_118_SHIFT 0U +#define PINMUX_PIN_124_SHIFT 16U +#define PINMUX_PIN_125_SHIFT 8U +#define PINMUX_PIN_126_SHIFT 24U +#define PINMUX_PIN_127_SHIFT 8U +#define PINMUX_PIN_130_SHIFT 16U +#define PINMUX_PIN_133_SHIFT 8U +#define PINMUX_PIN_139_SHIFT 0U +#define PINMUX_PIN_140_SHIFT 8U +#define PINMUX_PIN_141_SHIFT 16U + + +#define PINMUX_GATE_EMIF_CLK_SHIFT 8U +#define PINMUX_GIOB_DISABLE_HET2_SHIFT 16U +#define PINMUX_ALT_ADC_TRIGGER_SHIFT 0U +#define PINMUX_ETHERNET_SHIFT 24U +#define PINMUX_ETPWM1_SHIFT 0U +#define PINMUX_ETPWM2_SHIFT 8U +#define PINMUX_ETPWM3_SHIFT 16U +#define PINMUX_ETPWM4_SHIFT 24U +#define PINMUX_ETPWM5_SHIFT 0U +#define PINMUX_ETPWM6_SHIFT 8U +#define PINMUX_ETPWM7_SHIFT 16U +#define PINMUX_ETPWM_TIME_BASE_SYNC_SHIFT 24U +#define PINMUX_ETPWM_TBCLK_SYNC_SHIFT 0U +#define PINMUX_TZ1_SHIFT 16U +#define PINMUX_TZ2_SHIFT 24U +#define PINMUX_TZ3_SHIFT 0U +#define PINMUX_EPWM1SYNCI_SHIFT 8U + +#define PINMUX_PIN_1_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_1_SHIFT)) +#define PINMUX_PIN_2_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_2_SHIFT)) +#define PINMUX_PIN_3_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_3_SHIFT)) +#define PINMUX_PIN_4_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_4_SHIFT)) +#define PINMUX_PIN_5_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_5_SHIFT)) +#define PINMUX_PIN_6_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_6_SHIFT)) +#define PINMUX_PIN_9_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_9_SHIFT)) +#define PINMUX_PIN_14_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_14_SHIFT)) +#define PINMUX_PIN_15_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_15_SHIFT)) +#define PINMUX_PIN_16_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_16_SHIFT)) +#define PINMUX_PIN_22_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_22_SHIFT)) +#define PINMUX_PIN_23_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_23_SHIFT)) +#define PINMUX_PIN_24_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_24_SHIFT)) +#define PINMUX_PIN_25_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_25_SHIFT)) +#define PINMUX_PIN_30_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_30_SHIFT)) +#define PINMUX_PIN_31_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_31_SHIFT)) +#define PINMUX_PIN_32_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_32_SHIFT)) +#define PINMUX_PIN_33_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_33_SHIFT)) +#define PINMUX_PIN_35_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_35_SHIFT)) +#define PINMUX_PIN_36_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_36_SHIFT)) +#define PINMUX_PIN_37_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_37_SHIFT)) +#define PINMUX_PIN_38_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_38_SHIFT)) +#define PINMUX_PIN_39_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_39_SHIFT)) +#define PINMUX_PIN_40_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_40_SHIFT)) +#define PINMUX_PIN_41_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_41_SHIFT)) +#define PINMUX_PIN_51_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_51_SHIFT)) +#define PINMUX_PIN_52_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_52_SHIFT)) +#define PINMUX_PIN_53_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_53_SHIFT)) +#define PINMUX_PIN_54_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_54_SHIFT)) +#define PINMUX_PIN_55_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_55_SHIFT)) +#define PINMUX_PIN_86_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_86_SHIFT)) +#define PINMUX_PIN_91_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_91_SHIFT)) +#define PINMUX_PIN_92_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_92_SHIFT)) +#define PINMUX_PIN_96_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_96_SHIFT)) +#define PINMUX_PIN_97_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_97_SHIFT)) +#define PINMUX_PIN_98_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_98_SHIFT)) +#define PINMUX_PIN_99_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_99_SHIFT)) +#define PINMUX_PIN_100_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_100_SHIFT)) +#define PINMUX_PIN_105_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_105_SHIFT)) +#define PINMUX_PIN_106_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_106_SHIFT)) +#define PINMUX_PIN_107_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_107_SHIFT)) +#define PINMUX_PIN_118_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_118_SHIFT)) +#define PINMUX_PIN_124_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_124_SHIFT)) +#define PINMUX_PIN_125_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_125_SHIFT)) +#define PINMUX_PIN_126_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_126_SHIFT)) +#define PINMUX_PIN_127_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_127_SHIFT)) +#define PINMUX_PIN_130_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_130_SHIFT)) +#define PINMUX_PIN_133_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_133_SHIFT)) +#define PINMUX_PIN_139_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_139_SHIFT)) +#define PINMUX_PIN_140_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_140_SHIFT)) +#define PINMUX_PIN_141_MASK (~(uint32)((uint32)0xFFU << PINMUX_PIN_141_SHIFT)) + +#define PINMUX_GATE_EMIF_CLK_MASK (~(uint32)((uint32)0xFFU << PINMUX_GATE_EMIF_CLK_SHIFT)) +#define PINMUX_GIOB_DISABLE_HET2_MASK (~(uint32)((uint32)0xFFU << PINMUX_GIOB_DISABLE_HET2_SHIFT)) +#define PINMUX_ALT_ADC_TRIGGER_MASK (~(uint32)((uint32)0xFFU << PINMUX_ALT_ADC_TRIGGER_SHIFT)) +#define PINMUX_ETHERNET_MASK (~(uint32)((uint32)0xFFU << PINMUX_ETHERNET_SHIFT)) + + + +#define PINMUX_ETPWM1_MASK (~(uint32)((uint32)0xFFU << PINMUX_ETPWM1_SHIFT)) +#define PINMUX_ETPWM2_MASK (~(uint32)((uint32)0xFFU << PINMUX_ETPWM2_SHIFT)) +#define PINMUX_ETPWM3_MASK (~(uint32)((uint32)0xFFU << PINMUX_ETPWM3_SHIFT)) +#define PINMUX_ETPWM4_MASK (~(uint32)((uint32)0xFFU << PINMUX_ETPWM4_SHIFT)) +#define PINMUX_ETPWM5_MASK (~(uint32)((uint32)0xFFU << PINMUX_ETPWM5_SHIFT)) +#define PINMUX_ETPWM6_MASK (~(uint32)((uint32)0xFFU << PINMUX_ETPWM6_SHIFT)) +#define PINMUX_ETPWM7_MASK (~(uint32)((uint32)0xFFU << PINMUX_ETPWM7_SHIFT)) +#define PINMUX_ETPWM_TIME_BASE_SYNC_MASK (~(uint32)((uint32)0xFFU << PINMUX_ETPWM_TIME_BASE_SYNC_SHIFT)) +#define PINMUX_ETPWM_TBCLK_SYNC_MASK (~(uint32)((uint32)0xFFU << PINMUX_ETPWM_TBCLK_SYNC_SHIFT)) +#define PINMUX_TZ1_MASK (~(uint32)((uint32)0xFFU << PINMUX_TZ1_SHIFT)) +#define PINMUX_TZ2_MASK (~(uint32)((uint32)0xFFU << PINMUX_TZ2_SHIFT)) +#define PINMUX_TZ3_MASK (~(uint32)((uint32)0xFFU << PINMUX_TZ3_SHIFT)) +#define PINMUX_EPWM1SYNCI_MASK (~(uint32)((uint32)0xFFU << PINMUX_EPWM1SYNCI_SHIFT)) + +#define PINMUX_PIN_1_GIOB_3 ((uint32)((uint32)0x1U << PINMUX_PIN_1_SHIFT)) +#define PINMUX_PIN_1_OHCI_PRT_RcvData_1 ((uint32)((uint32)0x2U << PINMUX_PIN_1_SHIFT)) +#define PINMUX_PIN_1_W2FC_RXDI ((uint32)((uint32)0x4U << PINMUX_PIN_1_SHIFT)) + +#define PINMUX_PIN_2_GIOA_0 ((uint32)((uint32)0x1U << PINMUX_PIN_2_SHIFT)) +#define PINMUX_PIN_2_OHCI_PRT_RcvDpls_1 ((uint32)((uint32)0x2U << PINMUX_PIN_2_SHIFT)) +#define PINMUX_PIN_2_W2FC_RXDPI ((uint32)((uint32)0x4U << PINMUX_PIN_2_SHIFT)) + +#define PINMUX_PIN_3_MIBSPI3NCS_3 ((uint32)((uint32)0x1U << PINMUX_PIN_3_SHIFT)) +#define PINMUX_PIN_3_I2C_SCL ((uint32)((uint32)0x2U << PINMUX_PIN_3_SHIFT)) +#define PINMUX_PIN_3_HET1_29 ((uint32)((uint32)0x4U << PINMUX_PIN_3_SHIFT)) +#define PINMUX_PIN_3_nTZ1 ((uint32)((uint32)0x8U << PINMUX_PIN_3_SHIFT)) + +#define PINMUX_PIN_4_MIBSPI3NCS_2 ((uint32)((uint32)0x1U << PINMUX_PIN_4_SHIFT)) +#define PINMUX_PIN_4_I2C_SDA ((uint32)((uint32)0x2U << PINMUX_PIN_4_SHIFT)) +#define PINMUX_PIN_4_HET1_27 ((uint32)((uint32)0x4U << PINMUX_PIN_4_SHIFT)) +#define PINMUX_PIN_4_nTZ2 ((uint32)((uint32)0x8U << PINMUX_PIN_4_SHIFT)) + +#define PINMUX_PIN_5_GIOA_1 ((uint32)((uint32)0x1U << PINMUX_PIN_5_SHIFT)) +#define PINMUX_PIN_5_OHCI_PRT_RcvDmns_1 ((uint32)((uint32)0x2U << PINMUX_PIN_5_SHIFT)) +#define PINMUX_PIN_5_W2FC_RXDMI ((uint32)((uint32)0x4U << PINMUX_PIN_5_SHIFT)) + +#define PINMUX_PIN_6_HET1_11 ((uint32)((uint32)0x1U << PINMUX_PIN_6_SHIFT)) +#define PINMUX_PIN_6_MIBSPI3NCS_4 ((uint32)((uint32)0x2U << PINMUX_PIN_6_SHIFT)) +#define PINMUX_PIN_6_HET2_18 ((uint32)((uint32)0x4U << PINMUX_PIN_6_SHIFT)) +#define PINMUX_PIN_6_OHCI_PRT_OvrCurrent_1 ((uint32)((uint32)0x8U << PINMUX_PIN_6_SHIFT)) +#define PINMUX_PIN_6_W2FC_VBUSI ((uint32)((uint32)0x10U << PINMUX_PIN_6_SHIFT)) +#define PINMUX_PIN_6_ETPWM1SYNCO ((uint32)((uint32)0x20U << PINMUX_PIN_6_SHIFT)) + +#define PINMUX_PIN_9_GIOA_2 ((uint32)((uint32)0x1U << PINMUX_PIN_9_SHIFT)) +#define PINMUX_PIN_9_OHCI_RCFG_txdPls_1 ((uint32)((uint32)0x2U << PINMUX_PIN_9_SHIFT)) +#define PINMUX_PIN_9_W2FC_TXDO ((uint32)((uint32)0x4U << PINMUX_PIN_9_SHIFT)) +#define PINMUX_PIN_9_HET2_0 ((uint32)((uint32)0x8U << PINMUX_PIN_9_SHIFT)) +#define PINMUX_PIN_9_EQEP2I ((uint32)((uint32)0x10U << PINMUX_PIN_9_SHIFT)) + +#define PINMUX_PIN_14_GIOA_5 ((uint32)((uint32)0x1U << PINMUX_PIN_14_SHIFT)) +#define PINMUX_PIN_14_EXTCLKIN ((uint32)((uint32)0x2U << PINMUX_PIN_14_SHIFT)) +#define PINMUX_PIN_14_ETPWM1A ((uint32)((uint32)0x4U << PINMUX_PIN_14_SHIFT)) + +#define PINMUX_PIN_15_HET1_22 ((uint32)((uint32)0x1U << PINMUX_PIN_15_SHIFT)) +#define PINMUX_PIN_15_OHCI_RCFG_txSe0_1 ((uint32)((uint32)0x2U << PINMUX_PIN_15_SHIFT)) +#define PINMUX_PIN_15_W2FC_SE0O ((uint32)((uint32)0x4U << PINMUX_PIN_15_SHIFT)) + +#define PINMUX_PIN_16_GIOA_6 ((uint32)((uint32)0x1U << PINMUX_PIN_16_SHIFT)) +#define PINMUX_PIN_16_HET2_4 ((uint32)((uint32)0x2U << PINMUX_PIN_16_SHIFT)) +#define PINMUX_PIN_16_ETPWM1B ((uint32)((uint32)0x4U << PINMUX_PIN_16_SHIFT)) + +#define PINMUX_PIN_22_GIOA_7 ((uint32)((uint32)0x1U << PINMUX_PIN_22_SHIFT)) +#define PINMUX_PIN_22_HET2_6 ((uint32)((uint32)0x2U << PINMUX_PIN_22_SHIFT)) +#define PINMUX_PIN_22_ETPWM2A ((uint32)((uint32)0x4U << PINMUX_PIN_22_SHIFT)) + +#define PINMUX_PIN_23_HET1_01 ((uint32)((uint32)0x1U << PINMUX_PIN_23_SHIFT)) +#define PINMUX_PIN_23_SPI4NENA ((uint32)((uint32)0x2U << PINMUX_PIN_23_SHIFT)) +#define PINMUX_PIN_23_OHCI_RCFG_txEnL_1 ((uint32)((uint32)0x4U << PINMUX_PIN_23_SHIFT)) +#define PINMUX_PIN_23_W2FC_PUENO ((uint32)((uint32)0x8U << PINMUX_PIN_23_SHIFT)) +#define PINMUX_PIN_23_HET2_8 ((uint32)((uint32)0x10U << PINMUX_PIN_23_SHIFT)) +#define PINMUX_PIN_23_EQEP2A ((uint32)((uint32)0x20U << PINMUX_PIN_23_SHIFT)) + +#define PINMUX_PIN_24_HET1_03 ((uint32)((uint32)0x1U << PINMUX_PIN_24_SHIFT)) +#define PINMUX_PIN_24_SPI4NCS_0 ((uint32)((uint32)0x2U << PINMUX_PIN_24_SHIFT)) +#define PINMUX_PIN_24_OHCI_RCFG_speed_1 ((uint32)((uint32)0x4U << PINMUX_PIN_24_SHIFT)) +#define PINMUX_PIN_24_W2FC_PUENON ((uint32)((uint32)0x8U << PINMUX_PIN_24_SHIFT)) +#define PINMUX_PIN_24_HET2_10 ((uint32)((uint32)0x10U << PINMUX_PIN_24_SHIFT)) +#define PINMUX_PIN_24_EQEP2B ((uint32)((uint32)0x20U << PINMUX_PIN_24_SHIFT)) + +#define PINMUX_PIN_25_HET1_0 ((uint32)((uint32)0x1U << PINMUX_PIN_25_SHIFT)) +#define PINMUX_PIN_25_SPI4CLK ((uint32)((uint32)0x2U << PINMUX_PIN_25_SHIFT)) +#define PINMUX_PIN_25_ETPWM2B ((uint32)((uint32)0x4U << PINMUX_PIN_25_SHIFT)) + +#define PINMUX_PIN_30_HET1_02 ((uint32)((uint32)0x1U << PINMUX_PIN_30_SHIFT)) +#define PINMUX_PIN_30_SPI4SIMO ((uint32)((uint32)0x2U << PINMUX_PIN_30_SHIFT)) +#define PINMUX_PIN_30_ETPWM3A ((uint32)((uint32)0x4U << PINMUX_PIN_30_SHIFT)) + +#define PINMUX_PIN_31_HET1_05 ((uint32)((uint32)0x1U << PINMUX_PIN_31_SHIFT)) +#define PINMUX_PIN_31_SPI4SOMI ((uint32)((uint32)0x2U << PINMUX_PIN_31_SHIFT)) +#define PINMUX_PIN_31_HET2_12 ((uint32)((uint32)0x4U << PINMUX_PIN_31_SHIFT)) +#define PINMUX_PIN_31_ETPWM3B ((uint32)((uint32)0x8U << PINMUX_PIN_31_SHIFT)) + +#define PINMUX_PIN_32_MIBSPI5NCS_0 ((uint32)((uint32)0x1U << PINMUX_PIN_32_SHIFT)) +#define PINMUX_PIN_32_ETPWM4A ((uint32)((uint32)0x4U << PINMUX_PIN_32_SHIFT)) + +#define PINMUX_PIN_33_HET1_07 ((uint32)((uint32)0x1U << PINMUX_PIN_33_SHIFT)) +#define PINMUX_PIN_33_OHCI_RCFG_PrtPower_1 ((uint32)((uint32)0x2U << PINMUX_PIN_33_SHIFT)) +#define PINMUX_PIN_33_W2FC_GZO ((uint32)((uint32)0x4U << PINMUX_PIN_33_SHIFT)) +#define PINMUX_PIN_33_HET2_14 ((uint32)((uint32)0x8U << PINMUX_PIN_33_SHIFT)) +#define PINMUX_PIN_33_ETPWM7B ((uint32)((uint32)0x10U << PINMUX_PIN_33_SHIFT)) + +#define PINMUX_PIN_35_HET1_09 ((uint32)((uint32)0x1U << PINMUX_PIN_35_SHIFT)) +#define PINMUX_PIN_35_HET2_16 ((uint32)((uint32)0x2U << PINMUX_PIN_35_SHIFT)) +#define PINMUX_PIN_35_OHCI_RCFG_suspend_1 ((uint32)((uint32)0x4U << PINMUX_PIN_35_SHIFT)) +#define PINMUX_PIN_35_W2FC_SUSPENDO ((uint32)((uint32)0x8U << PINMUX_PIN_35_SHIFT)) +#define PINMUX_PIN_35_ETPWM7A ((uint32)((uint32)0x10U << PINMUX_PIN_35_SHIFT)) + +#define PINMUX_PIN_36_HET1_04 ((uint32)((uint32)0x1U << PINMUX_PIN_36_SHIFT)) +#define PINMUX_PIN_36_ETPWM4B ((uint32)((uint32)0x2U << PINMUX_PIN_36_SHIFT)) + +#define PINMUX_PIN_37_MIBSPI3NCS_1 ((uint32)((uint32)0x1U << PINMUX_PIN_37_SHIFT)) +#define PINMUX_PIN_37_HET1_25 ((uint32)((uint32)0x2U << PINMUX_PIN_37_SHIFT)) +#define PINMUX_PIN_37_MDCLK ((uint32)((uint32)0x4U << PINMUX_PIN_37_SHIFT)) + +#define PINMUX_PIN_38_HET1_06 ((uint32)((uint32)0x1U << PINMUX_PIN_38_SHIFT)) +#define PINMUX_PIN_38_SCIRX ((uint32)((uint32)0x2U << PINMUX_PIN_38_SHIFT)) +#define PINMUX_PIN_38_ETPWM5A ((uint32)((uint32)0x4U << PINMUX_PIN_38_SHIFT)) + +#define PINMUX_PIN_39_HET1_13 ((uint32)((uint32)0x1U << PINMUX_PIN_39_SHIFT)) +#define PINMUX_PIN_39_SCITX ((uint32)((uint32)0x2U << PINMUX_PIN_39_SHIFT)) +#define PINMUX_PIN_39_ETPWM5B ((uint32)((uint32)0x4U << PINMUX_PIN_39_SHIFT)) + +#define PINMUX_PIN_40_MIBSPI1NCS_2 ((uint32)((uint32)0x1U << PINMUX_PIN_40_SHIFT)) +#define PINMUX_PIN_40_HET1_19 ((uint32)((uint32)0x2U << PINMUX_PIN_40_SHIFT)) +#define PINMUX_PIN_40_MDIO ((uint32)((uint32)0x4U << PINMUX_PIN_40_SHIFT)) + +#define PINMUX_PIN_41_HET1_15 ((uint32)((uint32)0x1U << PINMUX_PIN_41_SHIFT)) +#define PINMUX_PIN_41_MIBSPI1NCS_4 ((uint32)((uint32)0x2U << PINMUX_PIN_41_SHIFT)) +#define PINMUX_PIN_41_ECAP1 ((uint32)((uint32)0x4U << PINMUX_PIN_41_SHIFT)) + +#define PINMUX_PIN_51_MIBSPI3SOMI ((uint32)((uint32)0x1U << PINMUX_PIN_51_SHIFT)) +#define PINMUX_PIN_51_AWM_EXT_ENA ((uint32)((uint32)0x2U << PINMUX_PIN_51_SHIFT)) +#define PINMUX_PIN_51_ECAP2 ((uint32)((uint32)0x4U << PINMUX_PIN_51_SHIFT)) + +#define PINMUX_PIN_52_MIBSPI3SIMO ((uint32)((uint32)0x1U << PINMUX_PIN_52_SHIFT)) +#define PINMUX_PIN_52_AWM_EXT_SEL_0 ((uint32)((uint32)0x2U << PINMUX_PIN_52_SHIFT)) +#define PINMUX_PIN_52_ECAP3 ((uint32)((uint32)0x4U << PINMUX_PIN_52_SHIFT)) + +#define PINMUX_PIN_53_MIBSPI3CLK ((uint32)((uint32)0x1U << PINMUX_PIN_53_SHIFT)) +#define PINMUX_PIN_53_AWM_EXT_SEL_1 ((uint32)((uint32)0x2U << PINMUX_PIN_53_SHIFT)) +#define PINMUX_PIN_53_EQEP1A ((uint32)((uint32)0x4U << PINMUX_PIN_53_SHIFT)) + +#define PINMUX_PIN_54_MIBSPI3NENA ((uint32)((uint32)0x1U << PINMUX_PIN_54_SHIFT)) +#define PINMUX_PIN_54_MIBSPI3NCS_5 ((uint32)((uint32)0x2U << PINMUX_PIN_54_SHIFT)) +#define PINMUX_PIN_54_HET1_31 ((uint32)((uint32)0x4U << PINMUX_PIN_54_SHIFT)) +#define PINMUX_PIN_54_EQEP1B ((uint32)((uint32)0x8U << PINMUX_PIN_54_SHIFT)) + +#define PINMUX_PIN_55_MIBSPI3NCS_0 ((uint32)((uint32)0x1U << PINMUX_PIN_55_SHIFT)) +#define PINMUX_PIN_55_AD2EVT ((uint32)((uint32)0x2U << PINMUX_PIN_55_SHIFT)) +#define PINMUX_PIN_55_GIOB_2 ((uint32)((uint32)0x4U << PINMUX_PIN_55_SHIFT)) +#define PINMUX_PIN_55_EQEP1I ((uint32)((uint32)0x8U << PINMUX_PIN_55_SHIFT)) + +#define PINMUX_PIN_86_AD1EVT ((uint32)((uint32)0x1U << PINMUX_PIN_86_SHIFT)) +#define PINMUX_PIN_86_MII_RX_ER ((uint32)((uint32)0x2U << PINMUX_PIN_86_SHIFT)) +#define PINMUX_PIN_86_RMII_RX_ER ((uint32)((uint32)0x4U << PINMUX_PIN_86_SHIFT)) + +#define PINMUX_PIN_91_HET1_24 ((uint32)((uint32)0x1U << PINMUX_PIN_91_SHIFT)) +#define PINMUX_PIN_91_MIBSPI1NCS_5 ((uint32)((uint32)0x2U << PINMUX_PIN_91_SHIFT)) +#define PINMUX_PIN_91_MII_RXD_0 ((uint32)((uint32)0x4U << PINMUX_PIN_91_SHIFT)) +#define PINMUX_PIN_91_RMII_RXD_0 ((uint32)((uint32)0x8U << PINMUX_PIN_91_SHIFT)) + +#define PINMUX_PIN_92_HET1_26 ((uint32)((uint32)0x1U << PINMUX_PIN_92_SHIFT)) +#define PINMUX_PIN_92_MII_RXD_1 ((uint32)((uint32)0x2U << PINMUX_PIN_92_SHIFT)) +#define PINMUX_PIN_92_RMII_RXD_1 ((uint32)((uint32)0x4U << PINMUX_PIN_92_SHIFT)) + +#define PINMUX_PIN_96_MIBSPI1NENA ((uint32)((uint32)0x1U << PINMUX_PIN_96_SHIFT)) +#define PINMUX_PIN_96_HET1_23 ((uint32)((uint32)0x2U << PINMUX_PIN_96_SHIFT)) +#define PINMUX_PIN_96_MII_RXD_2 ((uint32)((uint32)0x4U << PINMUX_PIN_96_SHIFT)) +#define PINMUX_PIN_96_OHCI_PRT_RcvDpls_0 ((uint32)((uint32)0x8U << PINMUX_PIN_96_SHIFT)) +#define PINMUX_PIN_96_ECAP4 ((uint32)((uint32)0x10U << PINMUX_PIN_96_SHIFT)) + +#define PINMUX_PIN_97_MIBSPI5NENA ((uint32)((uint32)0x1U << PINMUX_PIN_97_SHIFT)) +#define PINMUX_PIN_97_MII_RXD_3 ((uint32)((uint32)0x4U << PINMUX_PIN_97_SHIFT)) +#define PINMUX_PIN_97_OHCI_PRT_RcvDmns_0 ((uint32)((uint32)0x8U << PINMUX_PIN_97_SHIFT)) +#define PINMUX_PIN_97_MIBSPI5SOMI_1 ((uint32)((uint32)0x10U << PINMUX_PIN_97_SHIFT)) +#define PINMUX_PIN_97_ECAP5 ((uint32)((uint32)0x20U << PINMUX_PIN_97_SHIFT)) + +#define PINMUX_PIN_98_MIBSPI5SOMI_0 ((uint32)((uint32)0x1U << PINMUX_PIN_98_SHIFT)) +#define PINMUX_PIN_98_MII_TXD_0 ((uint32)((uint32)0x4U << PINMUX_PIN_98_SHIFT)) +#define PINMUX_PIN_98_RMII_TXD_0 ((uint32)((uint32)0x8U << PINMUX_PIN_98_SHIFT)) + +#define PINMUX_PIN_99_MIBSPI5SIMO_0 ((uint32)((uint32)0x1U << PINMUX_PIN_99_SHIFT)) +#define PINMUX_PIN_99_MII_TXD_1 ((uint32)((uint32)0x4U << PINMUX_PIN_99_SHIFT)) +#define PINMUX_PIN_99_RMII_TXD_1 ((uint32)((uint32)0x8U << PINMUX_PIN_99_SHIFT)) +#define PINMUX_PIN_99_MIBSPI5SOMI_2 ((uint32)((uint32)0x10U << PINMUX_PIN_99_SHIFT)) + +#define PINMUX_PIN_100_MIBSPI5CLK ((uint32)((uint32)0x1U << PINMUX_PIN_100_SHIFT)) +#define PINMUX_PIN_100_MII_TXEN ((uint32)((uint32)0x4U << PINMUX_PIN_100_SHIFT)) +#define PINMUX_PIN_100_RMII_TXEN ((uint32)((uint32)0x8U << PINMUX_PIN_100_SHIFT)) + +#define PINMUX_PIN_105_MIBSPI1NCS_0 ((uint32)((uint32)0x1U << PINMUX_PIN_105_SHIFT)) +#define PINMUX_PIN_105_MIBSPI1SOMI_1 ((uint32)((uint32)0x2U << PINMUX_PIN_105_SHIFT)) +#define PINMUX_PIN_105_MII_TXD_2 ((uint32)((uint32)0x4U << PINMUX_PIN_105_SHIFT)) +#define PINMUX_PIN_105_OHCI_PRT_RcvData_0 ((uint32)((uint32)0x8U << PINMUX_PIN_105_SHIFT)) +#define PINMUX_PIN_105_ECAP6 ((uint32)((uint32)0x10U << PINMUX_PIN_105_SHIFT)) + +#define PINMUX_PIN_106_HET1_08 ((uint32)((uint32)0x1U << PINMUX_PIN_106_SHIFT)) +#define PINMUX_PIN_106_MIBSPI1SIMO_1 ((uint32)((uint32)0x2U << PINMUX_PIN_106_SHIFT)) +#define PINMUX_PIN_106_MII_TXD_3 ((uint32)((uint32)0x4U << PINMUX_PIN_106_SHIFT)) +#define PINMUX_PIN_106_OHCI_PRT_OvrCurrent_0 ((uint32)((uint32)0x8U << PINMUX_PIN_106_SHIFT)) + +#define PINMUX_PIN_107_HET1_28 ((uint32)((uint32)0x1U << PINMUX_PIN_107_SHIFT)) +#define PINMUX_PIN_107_MII_RXCLK ((uint32)((uint32)0x2U << PINMUX_PIN_107_SHIFT)) +#define PINMUX_PIN_107_RMII_REFCLK ((uint32)((uint32)0x4U << PINMUX_PIN_107_SHIFT)) +#define PINMUX_PIN_107_MII_RX_AVCLK4 ((uint32)((uint32)0x8U << PINMUX_PIN_107_SHIFT)) + +#define PINMUX_PIN_118_HET1_10 ((uint32)((uint32)0x1U << PINMUX_PIN_118_SHIFT)) +#define PINMUX_PIN_118_MII_TX_CLK ((uint32)((uint32)0x2U << PINMUX_PIN_118_SHIFT)) +#define PINMUX_PIN_118_OHCI_RCFG_txEnL_0 ((uint32)((uint32)0x4U << PINMUX_PIN_118_SHIFT)) +#define PINMUX_PIN_118_MII_TX_AVCLK4 ((uint32)((uint32)0x8U << PINMUX_PIN_118_SHIFT)) +#define PINMUX_PIN_118_nTZ3 ((uint32)((uint32)0x10U << PINMUX_PIN_118_SHIFT)) + +#define PINMUX_PIN_124_HET1_12 ((uint32)((uint32)0x1U << PINMUX_PIN_124_SHIFT)) +#define PINMUX_PIN_124_MII_CRS ((uint32)((uint32)0x2U << PINMUX_PIN_124_SHIFT)) +#define PINMUX_PIN_124_RMII_CRS_DV ((uint32)((uint32)0x4U << PINMUX_PIN_124_SHIFT)) + +#define PINMUX_PIN_125_HET1_14 ((uint32)((uint32)0x1U << PINMUX_PIN_125_SHIFT)) +#define PINMUX_PIN_125_OHCI_RCFG_txSe0_0 ((uint32)((uint32)0x2U << PINMUX_PIN_125_SHIFT)) + +#define PINMUX_PIN_126_GIOB_0 ((uint32)((uint32)0x1U << PINMUX_PIN_126_SHIFT)) +#define PINMUX_PIN_126_OHCI_RCFG_txDpls_0 ((uint32)((uint32)0x2U << PINMUX_PIN_126_SHIFT)) + +#define PINMUX_PIN_127_HET1_30 ((uint32)((uint32)0x1U << PINMUX_PIN_127_SHIFT)) +#define PINMUX_PIN_127_MII_RX_DV ((uint32)((uint32)0x2U << PINMUX_PIN_127_SHIFT)) +#define PINMUX_PIN_127_OHCI_RCFG_speed_0 ((uint32)((uint32)0x4U << PINMUX_PIN_127_SHIFT)) +#define PINMUX_PIN_127_EQEP2S ((uint32)((uint32)0x8U << PINMUX_PIN_127_SHIFT)) + +#define PINMUX_PIN_130_MIBSPI1NCS_1 ((uint32)((uint32)0x1U << PINMUX_PIN_130_SHIFT)) +#define PINMUX_PIN_130_HET1_17 ((uint32)((uint32)0x2U << PINMUX_PIN_130_SHIFT)) +#define PINMUX_PIN_130_MII_COL ((uint32)((uint32)0x4U << PINMUX_PIN_130_SHIFT)) +#define PINMUX_PIN_130_OHCI_RCFG_suspend_0 ((uint32)((uint32)0x8U << PINMUX_PIN_130_SHIFT)) +#define PINMUX_PIN_130_EQEP1S ((uint32)((uint32)0x10U << PINMUX_PIN_130_SHIFT)) + +#define PINMUX_PIN_133_GIOB_1 ((uint32)((uint32)0x1U << PINMUX_PIN_133_SHIFT)) +#define PINMUX_PIN_133_OHCI_RCFG_PrtPower_0 ((uint32)((uint32)0x2U << PINMUX_PIN_133_SHIFT)) + +#define PINMUX_PIN_139_HET1_16 ((uint32)((uint32)0x1U << PINMUX_PIN_139_SHIFT)) +#define PINMUX_PIN_139_ETPWM1SYNCI ((uint32)((uint32)0x2U << PINMUX_PIN_139_SHIFT)) +#define PINMUX_PIN_139_ETPWM1SYNCO ((uint32)((uint32)0x4U << PINMUX_PIN_139_SHIFT)) + +#define PINMUX_PIN_140_HET1_18 ((uint32)((uint32)0x1U << PINMUX_PIN_140_SHIFT)) +#define PINMUX_PIN_140_ETPWM6A ((uint32)((uint32)0x2U << PINMUX_PIN_140_SHIFT)) + +#define PINMUX_PIN_141_HET1_20 ((uint32)((uint32)0x1U << PINMUX_PIN_141_SHIFT)) +#define PINMUX_PIN_141_ETPWM6B ((uint32)((uint32)0x2U << PINMUX_PIN_141_SHIFT)) + +#define PINMUX_PIN_133_GIOB_1 ((uint32)((uint32)0x1U << PINMUX_PIN_133_SHIFT)) + +#define PINMUX_PIN_1_GIOB_3 ((uint32)((uint32)0x1U << PINMUX_PIN_1_SHIFT)) + +#define PINMUX_PIN_2_GIOA_0 ((uint32)((uint32)0x1U << PINMUX_PIN_2_SHIFT)) + +#define PINMUX_PIN_5_GIOA_1 ((uint32)((uint32)0x1U << PINMUX_PIN_5_SHIFT)) + +#define PINMUX_PIN_15_HET1_22 ((uint32)((uint32)0x1U << PINMUX_PIN_15_SHIFT)) + +#define PINMUX_PIN_125_HET1_14 ((uint32)((uint32)0x1U << PINMUX_PIN_125_SHIFT)) + +#define PINMUX_PIN_126_GIOB_0 ((uint32)((uint32)0x1U << PINMUX_PIN_126_SHIFT)) + +#define PINMUX_GATE_EMIF_CLK_ON ((uint32)((uint32)0x0 << PINMUX_GATE_EMIF_CLK_SHIFT)) +#define PINMUX_GIOB_DISABLE_HET2_ON ((uint32)((uint32)0x1U << PINMUX_GIOB_DISABLE_HET2_SHIFT)) +#define PINMUX_GATE_EMIF_CLK_OFF ((uint32)((uint32)0x1U << PINMUX_GATE_EMIF_CLK_SHIFT)) +#define PINMUX_GIOB_DISABLE_HET2_OFF ((uint32)((uint32)0x0 << PINMUX_GIOB_DISABLE_HET2_SHIFT)) +#define PINMUX_ALT_ADC_TRIGGER_1 ((uint32)((uint32)0x1U << PINMUX_ALT_ADC_TRIGGER_SHIFT)) +#define PINMUX_ALT_ADC_TRIGGER_2 ((uint32)((uint32)0x2U << PINMUX_ALT_ADC_TRIGGER_SHIFT)) +#define PINMUX_ETHERNET_MII ((uint32)((uint32)0x0 << PINMUX_ETHERNET_SHIFT)) +#define PINMUX_ETHERNET_RMII ((uint32)((uint32)0x1U << PINMUX_ETHERNET_SHIFT)) + +#define PINMUX_ETPWM1_EQEPERR12 ((uint32)((uint32)0x1U << PINMUX_ETPWM1_SHIFT)) +#define PINMUX_ETPWM1_EQEPERR1 ((uint32)((uint32)0x2U << PINMUX_ETPWM1_SHIFT)) +#define PINMUX_ETPWM1_EQEPERR2 ((uint32)((uint32)0x4U << PINMUX_ETPWM1_SHIFT)) +#define PINMUX_ETPWM2_EQEPERR12 ((uint32)((uint32)0x1U << PINMUX_ETPWM2_SHIFT)) +#define PINMUX_ETPWM2_EQEPERR1 ((uint32)((uint32)0x2U << PINMUX_ETPWM2_SHIFT)) +#define PINMUX_ETPWM2_EQEPERR2 ((uint32)((uint32)0x4U << PINMUX_ETPWM2_SHIFT)) +#define PINMUX_ETPWM3_EQEPERR12 ((uint32)((uint32)0x1U << PINMUX_ETPWM3_SHIFT)) +#define PINMUX_ETPWM3_EQEPERR1 ((uint32)((uint32)0x2U << PINMUX_ETPWM3_SHIFT)) +#define PINMUX_ETPWM3_EQEPERR2 ((uint32)((uint32)0x4U << PINMUX_ETPWM3_SHIFT)) +#define PINMUX_ETPWM4_EQEPERR12 ((uint32)((uint32)0x1U << PINMUX_ETPWM4_SHIFT)) +#define PINMUX_ETPWM4_EQEPERR1 ((uint32)((uint32)0x2U << PINMUX_ETPWM4_SHIFT)) +#define PINMUX_ETPWM4_EQEPERR2 ((uint32)((uint32)0x4U << PINMUX_ETPWM4_SHIFT)) +#define PINMUX_ETPWM5_EQEPERR12 ((uint32)((uint32)0x1U << PINMUX_ETPWM5_SHIFT)) +#define PINMUX_ETPWM5_EQEPERR1 ((uint32)((uint32)0x2U << PINMUX_ETPWM5_SHIFT)) +#define PINMUX_ETPWM5_EQEPERR2 ((uint32)((uint32)0x4U << PINMUX_ETPWM5_SHIFT)) +#define PINMUX_ETPWM6_EQEPERR12 ((uint32)((uint32)0x1U << PINMUX_ETPWM6_SHIFT)) +#define PINMUX_ETPWM6_EQEPERR1 ((uint32)((uint32)0x2U << PINMUX_ETPWM6_SHIFT)) +#define PINMUX_ETPWM6_EQEPERR2 ((uint32)((uint32)0x4U << PINMUX_ETPWM6_SHIFT)) +#define PINMUX_ETPWM7_EQEPERR12 ((uint32)((uint32)0x1U << PINMUX_ETPWM7_SHIFT)) +#define PINMUX_ETPWM7_EQEPERR1 ((uint32)((uint32)0x2U << PINMUX_ETPWM7_SHIFT)) +#define PINMUX_ETPWM7_EQEPERR2 ((uint32)((uint32)0x4U << PINMUX_ETPWM7_SHIFT)) +#define PINMUX_ETPWM_TIME_BASE_SYNC_ON ((uint32)((uint32)0x2U << PINMUX_ETPWM_TIME_BASE_SYNC_SHIFT)) +#define PINMUX_ETPWM_TBCLK_SYNC_ON ((uint32)((uint32)0x2U << PINMUX_ETPWM_TBCLK_SYNC_SHIFT)) +#define PINMUX_ETPWM_TIME_BASE_SYNC_OFF ((uint32)((uint32)0x0 << PINMUX_ETPWM_TIME_BASE_SYNC_SHIFT)) +#define PINMUX_ETPWM_TBCLK_SYNC_OFF ((uint32)((uint32)0x0 << PINMUX_ETPWM_TBCLK_SYNC_SHIFT)) +#define PINMUX_TZ1_ASYNC ((uint32)((uint32)0x1U << PINMUX_TZ1_SHIFT)) +#define PINMUX_TZ1_SYNC ((uint32)((uint32)0x2U << PINMUX_TZ1_SHIFT)) +#define PINMUX_TZ1_FILTERED ((uint32)((uint32)0x4U << PINMUX_TZ1_SHIFT)) +#define PINMUX_TZ2_ASYNC ((uint32)((uint32)0x1U << PINMUX_TZ2_SHIFT)) +#define PINMUX_TZ2_SYNC ((uint32)((uint32)0x2U << PINMUX_TZ2_SHIFT)) +#define PINMUX_TZ2_FILTERED ((uint32)((uint32)0x4U << PINMUX_TZ2_SHIFT)) +#define PINMUX_TZ3_ASYNC ((uint32)((uint32)0x1U << PINMUX_TZ3_SHIFT)) +#define PINMUX_TZ3_SYNC ((uint32)((uint32)0x2U << PINMUX_TZ3_SHIFT)) +#define PINMUX_TZ3_FILTERED ((uint32)((uint32)0x4U << PINMUX_TZ3_SHIFT)) +#define PINMUX_EPWM1SYNCI_ASYNC ((uint32)((uint32)0x1U << PINMUX_EPWM1SYNCI_SHIFT)) +#define PINMUX_EPWM1SYNCI_SYNC ((uint32)((uint32)0x2U << PINMUX_EPWM1SYNCI_SHIFT)) +#define PINMUX_EPWM1SYNCI_FILTERED ((uint32)((uint32)0x4U << PINMUX_EPWM1SYNCI_SHIFT)) + +typedef struct pinmux_config_reg +{ + uint32 CONFIG_PINMMR0; + uint32 CONFIG_PINMMR1; + uint32 CONFIG_PINMMR2; + uint32 CONFIG_PINMMR3; + uint32 CONFIG_PINMMR4; + uint32 CONFIG_PINMMR5; + uint32 CONFIG_PINMMR6; + uint32 CONFIG_PINMMR7; + uint32 CONFIG_PINMMR8; + uint32 CONFIG_PINMMR9; + uint32 CONFIG_PINMMR10; + uint32 CONFIG_PINMMR11; + uint32 CONFIG_PINMMR12; + uint32 CONFIG_PINMMR13; + uint32 CONFIG_PINMMR14; + uint32 CONFIG_PINMMR15; + uint32 CONFIG_PINMMR16; + uint32 CONFIG_PINMMR17; + uint32 CONFIG_PINMMR18; + uint32 CONFIG_PINMMR19; + uint32 CONFIG_PINMMR20; + uint32 CONFIG_PINMMR21; + uint32 CONFIG_PINMMR22; + uint32 CONFIG_PINMMR23; + uint32 CONFIG_PINMMR24; + uint32 CONFIG_PINMMR25; + uint32 CONFIG_PINMMR26; + uint32 CONFIG_PINMMR27; + uint32 CONFIG_PINMMR28; + uint32 CONFIG_PINMMR29; + uint32 CONFIG_PINMMR30; + uint32 CONFIG_PINMMR31; + uint32 CONFIG_PINMMR32; + uint32 CONFIG_PINMMR33; + uint32 CONFIG_PINMMR34; + uint32 CONFIG_PINMMR35; + uint32 CONFIG_PINMMR36; + uint32 CONFIG_PINMMR37; + uint32 CONFIG_PINMMR38; + uint32 CONFIG_PINMMR39; + uint32 CONFIG_PINMMR40; + uint32 CONFIG_PINMMR41; + uint32 CONFIG_PINMMR42; + uint32 CONFIG_PINMMR43; + uint32 CONFIG_PINMMR44; + uint32 CONFIG_PINMMR45; + uint32 CONFIG_PINMMR46; + uint32 CONFIG_PINMMR47; +}pinmux_config_reg_t; + +/** + * @defgroup IOMM IOMM + * @brief I/O Multiplexing and Control Module. + * + * The IOMM contains memory-mapped registers (MMR) that control device-specific multiplexed functions. + * The safety and diagnostic features of the IOMM are: + * - Kicker mechanism to protect the MMRs from accidental writes + * - Master-id checker to only allow the CPU to write to the MMRs + * - Error indication for access violations + * + * Related Files + * - reg_pinmux.h + * - pinmux.h + * - pinmux.c + * @addtogroup IOMM + * @{ + */ + +/** @fn void muxInit(void) +* @brief Initializes the PINMUX Driver +* +* This function initializes the PINMUX module and configures the selected +* pinmux settings as per the user selection in the GUI +*/ +void muxInit(void); +void pinmuxGetConfigValue(pinmux_config_reg_t *config_reg, config_value_type_t type); +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/**@}*/ +#ifdef __cplusplus +} +#endif /*extern "C" */ +#endif diff --git a/include/arch/rm46l8lp/halcogen/pom.h b/include/arch/rm46l8lp/halcogen/pom.h new file mode 100644 index 0000000..dfd4034 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/pom.h @@ -0,0 +1,242 @@ +/** @file pom.h +* @brief POM Driver Definition File +* @date 11-Dec-2018 +* @version 04.07.01 +* +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __POM_H__ +#define __POM_H__ + +#include "reg_pom.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/** @enum pom_region_size +* @brief Alias names for pom region size +* This enumeration is used to provide alias names for POM region size: +*/ +enum pom_region_size +{ + SIZE_32BYTES = 0U, + SIZE_64BYTES = 1U, + SIZE_128BYTES = 2U, + SIZE_256BYTES = 3U, + SIZE_512BYTES = 4U, + SIZE_1KB = 5U, + SIZE_2KB = 6U, + SIZE_4KB = 7U, + SIZE_8KB = 8U, + SIZE_16KB = 9U, + SIZE_32KB = 10U, + SIZE_64KB = 11U, + SIZE_128KB = 12U, + SIZE_256KB = 13U +}; + +/** @def INTERNAL_RAM +* @brief Alias name for Internal RAM +*/ +#define INTERNAL_RAM 0x08000000U + +/** @def SDRAM +* @brief Alias name for SD RAM +*/ +#define SDRAM 0x80000000U + +/** @def ASYNC_MEMORY +* @brief Alias name for Async RAM +*/ +#define ASYNC_MEMORY 0x60000000U + + +typedef uint32 REGION_t; + +/** @struct REGION_CONFIG_ST +* @brief POM region configuration +*/ +typedef struct +{ + uint32 Prog_Reg_Sta_Addr; + uint32 Ovly_Reg_Sta_Addr; + uint32 Reg_Size; +}REGION_CONFIG_t; + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +/* Configuration registers */ +typedef struct pom_config_reg +{ + uint32 CONFIG_POMGLBCTRL; + uint32 CONFIG_POMPROGSTART0; + uint32 CONFIG_POMOVLSTART0; + uint32 CONFIG_POMREGSIZE0; + uint32 CONFIG_POMPROGSTART1; + uint32 CONFIG_POMOVLSTART1; + uint32 CONFIG_POMREGSIZE1; + uint32 CONFIG_POMPROGSTART2; + uint32 CONFIG_POMOVLSTART2; + uint32 CONFIG_POMREGSIZE2; + uint32 CONFIG_POMPROGSTART3; + uint32 CONFIG_POMOVLSTART3; + uint32 CONFIG_POMREGSIZE3; + uint32 CONFIG_POMPROGSTART4; + uint32 CONFIG_POMOVLSTART4; + uint32 CONFIG_POMREGSIZE4; + uint32 CONFIG_POMPROGSTART5; + uint32 CONFIG_POMOVLSTART5; + uint32 CONFIG_POMREGSIZE5; + uint32 CONFIG_POMPROGSTART6; + uint32 CONFIG_POMOVLSTART6; + uint32 CONFIG_POMREGSIZE6; + uint32 CONFIG_POMPROGSTART7; + uint32 CONFIG_POMOVLSTART7; + uint32 CONFIG_POMREGSIZE7; + uint32 CONFIG_POMPROGSTART8; + uint32 CONFIG_POMOVLSTART8; + uint32 CONFIG_POMREGSIZE8; + uint32 CONFIG_POMPROGSTART9; + uint32 CONFIG_POMOVLSTART9; + uint32 CONFIG_POMREGSIZE9; + uint32 CONFIG_POMPROGSTART10; + uint32 CONFIG_POMOVLSTART10; + uint32 CONFIG_POMREGSIZE10; + uint32 CONFIG_POMPROGSTART11; + uint32 CONFIG_POMOVLSTART11; + uint32 CONFIG_POMREGSIZE11; + uint32 CONFIG_POMPROGSTART12; + uint32 CONFIG_POMOVLSTART12; + uint32 CONFIG_POMREGSIZE12; + uint32 CONFIG_POMPROGSTART13; + uint32 CONFIG_POMOVLSTART13; + uint32 CONFIG_POMREGSIZE13; + uint32 CONFIG_POMPROGSTART14; + uint32 CONFIG_POMOVLSTART14; + uint32 CONFIG_POMREGSIZE14; + uint32 CONFIG_POMPROGSTART15; + uint32 CONFIG_POMOVLSTART15; + uint32 CONFIG_POMREGSIZE15; + uint32 CONFIG_POMPROGSTART16; + uint32 CONFIG_POMOVLSTART16; + uint32 CONFIG_POMREGSIZE16; + uint32 CONFIG_POMPROGSTART17; + uint32 CONFIG_POMOVLSTART17; + uint32 CONFIG_POMREGSIZE17; + uint32 CONFIG_POMPROGSTART18; + uint32 CONFIG_POMOVLSTART18; + uint32 CONFIG_POMREGSIZE18; + uint32 CONFIG_POMPROGSTART19; + uint32 CONFIG_POMOVLSTART19; + uint32 CONFIG_POMREGSIZE19; + uint32 CONFIG_POMPROGSTART20; + uint32 CONFIG_POMOVLSTART20; + uint32 CONFIG_POMREGSIZE20; + uint32 CONFIG_POMPROGSTART21; + uint32 CONFIG_POMOVLSTART21; + uint32 CONFIG_POMREGSIZE21; + uint32 CONFIG_POMPROGSTART22; + uint32 CONFIG_POMOVLSTART22; + uint32 CONFIG_POMREGSIZE22; + uint32 CONFIG_POMPROGSTART23; + uint32 CONFIG_POMOVLSTART23; + uint32 CONFIG_POMREGSIZE23; + uint32 CONFIG_POMPROGSTART24; + uint32 CONFIG_POMOVLSTART24; + uint32 CONFIG_POMREGSIZE24; + uint32 CONFIG_POMPROGSTART25; + uint32 CONFIG_POMOVLSTART25; + uint32 CONFIG_POMREGSIZE25; + uint32 CONFIG_POMPROGSTART26; + uint32 CONFIG_POMOVLSTART26; + uint32 CONFIG_POMREGSIZE26; + uint32 CONFIG_POMPROGSTART27; + uint32 CONFIG_POMOVLSTART27; + uint32 CONFIG_POMREGSIZE27; + uint32 CONFIG_POMPROGSTART28; + uint32 CONFIG_POMOVLSTART28; + uint32 CONFIG_POMREGSIZE28; + uint32 CONFIG_POMPROGSTART29; + uint32 CONFIG_POMOVLSTART29; + uint32 CONFIG_POMREGSIZE29; + uint32 CONFIG_POMPROGSTART30; + uint32 CONFIG_POMOVLSTART30; + uint32 CONFIG_POMREGSIZE30; + uint32 CONFIG_POMPROGSTART31; + uint32 CONFIG_POMOVLSTART31; + uint32 CONFIG_POMREGSIZE31; +} pom_config_reg_t; + + +/** + * @defgroup POM POM + * @brief Parameter Overlay Module. + * + * The POM provides a mechanism to redirect accesses to non-volatile memory into a volatile memory + * internal or external to the device. The data requested by the CPU will be fetched from the overlay memory + * instead of the main non-volatile memory. + * + * Related Files + * - reg_pom.h + * - pom.h + * - pom.c + * @addtogroup POM + * @{ + */ + +/* POM Interface Functions */ +void POM_Region_Config(REGION_CONFIG_t *Reg_Config_Ptr,REGION_t Region_Num); +void POM_Reset(void); +void POM_Init(void); +void POM_Enable(void); +void pomGetConfigValue(pom_config_reg_t *config_reg, config_value_type_t type); + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +/**@}*/ +#ifdef __cplusplus +} +#endif /*extern "C" */ +#endif /* __POM_H_*/ diff --git a/include/arch/rm46l8lp/halcogen/reg_adc.h b/include/arch/rm46l8lp/halcogen/reg_adc.h new file mode 100644 index 0000000..4919db7 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_adc.h @@ -0,0 +1,261 @@ +/** @file reg_adc.h +* @brief ADC Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the ADC driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_ADC_H__ +#define __REG_ADC_H__ + +#include "sys_common.h" + + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Adc Register Frame Definition */ +/** @struct adcBase +* @brief ADC Register Frame Definition +* +* This type is used to access the ADC Registers. +*/ +/** @typedef adcBASE_t +* @brief ADC Register Frame Type Definition +* +* This type is used to access the ADC Registers. +*/ +typedef volatile struct adcBase +{ + uint32 RSTCR; /**< 0x0000: Reset control register */ + uint32 OPMODECR; /**< 0x0004: Operating mode control register */ + uint32 CLOCKCR; /**< 0x0008: Clock control register */ + uint32 CALCR; /**< 0x000C: Calibration control register */ + uint32 GxMODECR[3U]; /**< 0x0010,0x0014,0x0018: Group 0-2 mode control register */ + uint32 EVSRC; /**< 0x001C: Group 0 trigger source control register */ + uint32 G1SRC; /**< 0x0020: Group 1 trigger source control register */ + uint32 G2SRC; /**< 0x0024: Group 2 trigger source control register */ + uint32 GxINTENA[3U]; /**< 0x0028,0x002C,0x0030: Group 0-2 interrupt enable register */ + uint32 GxINTFLG[3U]; /**< 0x0034,0x0038,0x003C: Group 0-2 interrupt flag register */ + uint32 GxINTCR[3U]; /**< 0x0040-0x0048: Group 0-2 interrupt threshold register */ + uint32 EVDMACR; /**< 0x004C: Group 0 DMA control register */ + uint32 G1DMACR; /**< 0x0050: Group 1 DMA control register */ + uint32 G2DMACR; /**< 0x0054: Group 2 DMA control register */ + uint32 BNDCR; /**< 0x0058: Buffer boundary control register */ + uint32 BNDEND; /**< 0x005C: Buffer boundary end register */ + uint32 EVSAMP; /**< 0x0060: Group 0 sample window register */ + uint32 G1SAMP; /**< 0x0064: Group 1 sample window register */ + uint32 G2SAMP; /**< 0x0068: Group 2 sample window register */ + uint32 EVSR; /**< 0x006C: Group 0 status register */ + uint32 G1SR; /**< 0x0070: Group 1 status register */ + uint32 G2SR; /**< 0x0074: Group 2 status register */ + uint32 GxSEL[3U]; /**< 0x0078-0x007C: Group 0-2 channel select register */ + uint32 CALR; /**< 0x0084: Calibration register */ + uint32 SMSTATE; /**< 0x0088: State machine state register */ + uint32 LASTCONV; /**< 0x008C: Last conversion register */ + struct + { + uint32 BUF0; /**< 0x0090,0x00B0,0x00D0: Group 0-2 result buffer 1 register */ + uint32 BUF1; /**< 0x0094,0x00B4,0x00D4: Group 0-2 result buffer 1 register */ + uint32 BUF2; /**< 0x0098,0x00B8,0x00D8: Group 0-2 result buffer 2 register */ + uint32 BUF3; /**< 0x009C,0x00BC,0x00DC: Group 0-2 result buffer 3 register */ + uint32 BUF4; /**< 0x00A0,0x00C0,0x00E0: Group 0-2 result buffer 4 register */ + uint32 BUF5; /**< 0x00A4,0x00C4,0x00E4: Group 0-2 result buffer 5 register */ + uint32 BUF6; /**< 0x00A8,0x00C8,0x00E8: Group 0-2 result buffer 6 register */ + uint32 BUF7; /**< 0x00AC,0x00CC,0x00EC: Group 0-2 result buffer 7 register */ + } GxBUF[3U]; + uint32 EVEMUBUFFER; /**< 0x00F0: Group 0 emulation result buffer */ + uint32 G1EMUBUFFER; /**< 0x00F4: Group 1 emulation result buffer */ + uint32 G2EMUBUFFER; /**< 0x00F8: Group 2 emulation result buffer */ + uint32 EVTDIR; /**< 0x00FC: Event pin direction register */ + uint32 EVTOUT; /**< 0x0100: Event pin digital output register */ + uint32 EVTIN; /**< 0x0104: Event pin digital input register */ + uint32 EVTSET; /**< 0x0108: Event pin set register */ + uint32 EVTCLR; /**< 0x010C: Event pin clear register */ + uint32 EVTPDR; /**< 0x0110: Event pin open drain register */ + uint32 EVTDIS; /**< 0x0114: Event pin pull disable register */ + uint32 EVTPSEL; /**< 0x0118: Event pin pull select register */ + uint32 EVSAMPDISEN; /**< 0x011C: Group 0 sample discharge register */ + uint32 G1SAMPDISEN; /**< 0x0120: Group 1 sample discharge register */ + uint32 G2SAMPDISEN; /**< 0x0124: Group 2 sample discharge register */ + uint32 MAGINTCR1; /**< 0x0128: Magnitude interrupt control register 1 */ + uint32 MAGINT1MASK; /**< 0x012C: Magnitude interrupt mask register 1 */ + uint32 MAGINTCR2; /**< 0x0130: Magnitude interrupt control register 2 */ + uint32 MAGINT2MASK; /**< 0x0134: Magnitude interrupt mask register 2 */ + uint32 MAGINTCR3; /**< 0x0138: Magnitude interrupt control register 3 */ + uint32 MAGINT3MASK; /**< 0x013C: Magnitude interrupt mask register 3 */ + uint32 rsvd1; /**< 0x0140: Reserved */ + uint32 rsvd2; /**< 0x0144: Reserved */ + uint32 rsvd3; /**< 0x0148: Reserved */ + uint32 rsvd4; /**< 0x014C: Reserved */ + uint32 rsvd5; /**< 0x0150: Reserved */ + uint32 rsvd6; /**< 0x0154: Reserved */ + uint32 MAGTHRINTENASET; /**< 0x0158: Magnitude interrupt set register */ + uint32 MAGTHRINTENACLR; /**< 0x015C: Magnitude interrupt clear register */ + uint32 MAGTHRINTFLG; /**< 0x0160: Magnitude interrupt flag register */ + uint32 MAGTHRINTOFFSET; /**< 0x0164: Magnitude interrupt offset register */ + uint32 GxFIFORESETCR[3U]; /**< 0x0168,0x016C,0x0170: Group 0-2 fifo reset register */ + uint32 EVRAMADDR; /**< 0x0174: Group 0 RAM pointer register */ + uint32 G1RAMADDR; /**< 0x0178: Group 1 RAM pointer register */ + uint32 G2RAMADDR; /**< 0x017C: Group 2 RAM pointer register */ + uint32 PARCR; /**< 0x0180: Parity control register */ + uint32 PARADDR; /**< 0x0184: Parity error address register */ + uint32 PWRUPDLYCTRL; /**< 0x0188: Power-Up delay control register */ + uint32 rsvd7; /**< 0x018C: Reserved */ + uint32 ADEVCHNSELMODECTRL; /**< 0x0190: Event Group Channel Selection Mode Control Register */ + uint32 ADG1CHNSELMODECTRL; /**< 0x0194: Group1 Channel Selection Mode Control Register */ + uint32 ADG2CHNSELMODECTRL; /**< 0x0198: Group2 Channel Selection Mode Control Register */ + uint32 ADEVCURRCOUNT; /**< 0x019C: Event Group Current Count Register */ + uint32 ADEVMAXCOUNT; /**< 0x01A0: Event Group Max Count Register */ + uint32 ADG1CURRCOUNT; /**< 0x01A4: Group1 Current Count Register */ + uint32 ADG1MAXCOUNT; /**< 0x01A8: Group1 Max Count Register */ + uint32 ADG2CURRCOUNT; /**< 0x01AC: Group2 Current Count Register */ + uint32 ADG2MAXCOUNT; /**< 0x01B0: Group2 Max Count Register */ +} adcBASE_t; + + +/** @struct adcLUTEntry +* @brief ADC Look-Up Table Entry +* +* This type is used to access ADC Look-Up Table Entry +*/ +/** @typedef adcLUTEntry_t +* @brief ADC Look-Up Table Entry +* +* This type is used to access the Look-Up Table Entry. +*/ +typedef struct adcLUTEntry +{ +#if ((__little_endian__ == 1) || (__LITTLE_ENDIAN__ == 1)) + uint8 EV_INT_CHN_MUX_SEL; + uint8 EV_EXT_CHN_MUX_SEL; + uint16 rsvd; +#else + uint16 rsvd; + uint8 EV_EXT_CHN_MUX_SEL; + uint8 EV_INT_CHN_MUX_SEL; +#endif +}adcLUTEntry_t; + + +/** @struct adcLUT +* @brief ADC Look-Up Table +* +* This type is used to access ADC Look-Up Table +*/ +/** @typedef adcLUT_t +* @brief ADC Look-Up Table +* +* This type is used to access the ADC Look-Up Table. +*/ +typedef volatile struct adcLUT +{ + adcLUTEntry_t eventGroup[32]; + adcLUTEntry_t Group1[32]; + adcLUTEntry_t Group2[32]; +} adcLUT_t; + + +/** @def adcREG1 +* @brief ADC1 Register Frame Pointer +* +* This pointer is used by the ADC driver to access the ADC1 registers. +*/ +#define adcREG1 ((adcBASE_t *)0xFFF7C000U) + +/** @def adcREG2 +* @brief ADC2 Register Frame Pointer +* +* This pointer is used by the ADC driver to access the ADC2 registers. +*/ +#define adcREG2 ((adcBASE_t *)0xFFF7C200U) + +/** @def adcRAM1 +* @brief ADC1 RAM Pointer +* +* This pointer is used by the ADC driver to access the ADC1 RAM. +*/ +#define adcRAM1 (*(volatile uint32 *)0xFF3E0000U) + +/** @def adcRAM2 +* @brief ADC2 RAM Pointer +* +* This pointer is used by the ADC driver to access the ADC2 RAM. +*/ +#define adcRAM2 (*(volatile uint32 *)0xFF3A0000U) + +/** @def adcPARRAM1 +* @brief ADC1 Parity RAM Pointer +* +* This pointer is used by the ADC driver to access the ADC1 Parity RAM. +*/ +#define adcPARRAM1 (*(volatile uint32 *)(0xFF3E0000U + 0x1000U)) + +/** @def adcPARRAM2 +* @brief ADC2 Parity RAM Pointer +* +* This pointer is used by the ADC driver to access the ADC2 Parity RAM. +*/ +#define adcPARRAM2 (*(volatile uint32 *)(0xFF3A0000U + 0x1000U)) + +/** @def adcLUT1 +* @brief ADC1 Look-Up Table +* +* This pointer is used by the ADC driver to access the ADC1 Look-Up Table. +*/ +#define adcLUT1 ((adcLUT_t *) 0xFF3E2000U) + +/** @def adcLUT2 +* @brief ADC2 Look-Up Table +* +* This pointer is used by the ADC driver to access the ADC2 Look-Up Table. +*/ +#define adcLUT2 ((adcLUT_t *) 0xFF3A2000U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_can.h b/include/arch/rm46l8lp/halcogen/reg_can.h new file mode 100644 index 0000000..db6211a --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_can.h @@ -0,0 +1,208 @@ +/** @file reg_can.h +* @brief CAN Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the CAN driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_CAN_H__ +#define __REG_CAN_H__ + +#include "sys_common.h" + + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Can Register Frame Definition */ +/** @struct canBase +* @brief CAN Register Frame Definition +* +* This type is used to access the CAN Registers. +*/ +/** @typedef canBASE_t +* @brief CAN Register Frame Type Definition +* +* This type is used to access the CAN Registers. +*/ +typedef volatile struct canBase +{ + uint32 CTL; /**< 0x0000: Control Register */ + uint32 ES; /**< 0x0004: Error and Status Register */ + uint32 EERC; /**< 0x0008: Error Counter Register */ + uint32 BTR; /**< 0x000C: Bit Timing Register */ + uint32 INT; /**< 0x0010: Interrupt Register */ + uint32 TEST; /**< 0x0014: Test Register */ + uint32 rsvd1; /**< 0x0018: Reserved */ + uint32 PERR; /**< 0x001C: Parity/SECDED Error Code Register */ + uint32 rsvd2[24]; /**< 0x002C - 0x7C: Reserved */ + uint32 ABOTR; /**< 0x0080: Auto Bus On Time Register */ + uint32 TXRQX; /**< 0x0084: Transmission Request X Register */ + uint32 TXRQx[4U]; /**< 0x0088-0x0094: Transmission Request Registers */ + uint32 NWDATX; /**< 0x0098: New Data X Register */ + uint32 NWDATx[4U]; /**< 0x009C-0x00A8: New Data Registers */ + uint32 INTPNDX; /**< 0x00AC: Interrupt Pending X Register */ + uint32 INTPNDx[4U]; /**< 0x00B0-0x00BC: Interrupt Pending Registers */ + uint32 MSGVALX; /**< 0x00C0: Message Valid X Register */ + uint32 MSGVALx[4U]; /**< 0x00C4-0x00D0: Message Valid Registers */ + uint32 rsvd3; /**< 0x00D4: Reserved */ + uint32 INTMUXx[4U]; /**< 0x00D8-0x00E4: Interrupt Multiplexer Registers */ + uint32 rsvd4[6]; /**< 0x00E8: Reserved */ +#if ((__little_endian__ == 1) || (__LITTLE_ENDIAN__ == 1)) + uint8 IF1NO; /**< 0x0100: IF1 Command Register, Msg Number */ + uint8 IF1STAT; /**< 0x0100: IF1 Command Register, Status */ + uint8 IF1CMD; /**< 0x0100: IF1 Command Register, Command */ + uint8 rsvd9; /**< 0x0100: IF1 Command Register, Reserved */ +#else + uint8 rsvd9; /**< 0x0100: IF1 Command Register, Reserved */ + uint8 IF1CMD; /**< 0x0100: IF1 Command Register, Command */ + uint8 IF1STAT; /**< 0x0100: IF1 Command Register, Status */ + uint8 IF1NO; /**< 0x0100: IF1 Command Register, Msg Number */ +#endif + uint32 IF1MSK; /**< 0x0104: IF1 Mask Register */ + uint32 IF1ARB; /**< 0x0108: IF1 Arbitration Register */ + uint32 IF1MCTL; /**< 0x010C: IF1 Message Control Register */ + uint8 IF1DATx[8U]; /**< 0x0110-0x0114: IF1 Data A and B Registers */ + uint32 rsvd5[2]; /**< 0x0118: Reserved */ +#if ((__little_endian__ == 1) || (__LITTLE_ENDIAN__ == 1)) + uint8 IF2NO; /**< 0x0120: IF2 Command Register, Msg No */ + uint8 IF2STAT; /**< 0x0120: IF2 Command Register, Status */ + uint8 IF2CMD; /**< 0x0120: IF2 Command Register, Command */ + uint8 rsvd10; /**< 0x0120: IF2 Command Register, Reserved */ +#else + uint8 rsvd10; /**< 0x0120: IF2 Command Register, Reserved */ + uint8 IF2CMD; /**< 0x0120: IF2 Command Register, Command */ + uint8 IF2STAT; /**< 0x0120: IF2 Command Register, Status */ + uint8 IF2NO; /**< 0x0120: IF2 Command Register, Msg Number */ +#endif + uint32 IF2MSK; /**< 0x0124: IF2 Mask Register */ + uint32 IF2ARB; /**< 0x0128: IF2 Arbitration Register */ + uint32 IF2MCTL; /**< 0x012C: IF2 Message Control Register */ + uint8 IF2DATx[8U]; /**< 0x0130-0x0134: IF2 Data A and B Registers */ + uint32 rsvd6[2]; /**< 0x0138: Reserved */ + uint32 IF3OBS; /**< 0x0140: IF3 Observation Register */ + uint32 IF3MSK; /**< 0x0144: IF3 Mask Register */ + uint32 IF3ARB; /**< 0x0148: IF3 Arbitration Register */ + uint32 IF3MCTL; /**< 0x014C: IF3 Message Control Register */ + uint8 IF3DATx[8U]; /**< 0x0150-0x0154: IF3 Data A and B Registers */ + uint32 rsvd7[2]; /**< 0x0158: Reserved */ + uint32 IF3UEy[4U]; /**< 0x0160-0x016C: IF3 Update Enable Registers */ + uint32 rsvd8[28]; /**< 0x0170: Reserved */ + uint32 TIOC; /**< 0x01E0: TX IO Control Register */ + uint32 RIOC; /**< 0x01E4: RX IO Control Register */ +} canBASE_t; + + +/** @def canREG1 +* @brief CAN1 Register Frame Pointer +* +* This pointer is used by the CAN driver to access the CAN1 registers. +*/ +#define canREG1 ((canBASE_t *)0xFFF7DC00U) + +/** @def canREG2 +* @brief CAN2 Register Frame Pointer +* +* This pointer is used by the CAN driver to access the CAN2 registers. +*/ +#define canREG2 ((canBASE_t *)0xFFF7DE00U) + +/** @def canREG3 +* @brief CAN3 Register Frame Pointer +* +* This pointer is used by the CAN driver to access the CAN3 registers. +*/ +#define canREG3 ((canBASE_t *)0xFFF7E000U) + +/** @def canRAM1 +* @brief CAN1 Mailbox RAM Pointer +* +* This pointer is used by the CAN driver to access the CAN1 RAM. +*/ +#define canRAM1 (*(volatile uint32 *)0xFF1E0000U) + +/** @def canRAM2 +* @brief CAN2 Mailbox RAM Pointer +* +* This pointer is used by the CAN driver to access the CAN2 RAM. +*/ +#define canRAM2 (*(volatile uint32 *)0xFF1C0000U) + +/** @def canRAM3 +* @brief CAN3 Mailbox RAM Pointer +* +* This pointer is used by the CAN driver to access the CAN3 RAM. +*/ +#define canRAM3 (*(volatile uint32 *)0xFF1A0000U) + +/** @def canPARRAM1 +* @brief CAN1 Mailbox Parity RAM Pointer +* +* This pointer is used by the CAN driver to access the CAN1 Parity RAM +* for testing RAM parity error detect logic. +*/ +#define canPARRAM1 (*(volatile uint32 *)(0xFF1E0000U + 0x10U)) + +/** @def canPARRAM2 +* @brief CAN2 Mailbox Parity RAM Pointer +* +* This pointer is used by the CAN driver to access the CAN2 Parity RAM +* for testing RAM parity error detect logic. +*/ +#define canPARRAM2 (*(volatile uint32 *)(0xFF1C0000U + 0x10U)) + +/** @def canPARRAM3 +* @brief CAN3 Mailbox Parity RAM Pointer +* +* This pointer is used by the CAN driver to access the CAN3 Parity RAM +* for testing RAM parity error detect logic. +*/ +#define canPARRAM3 (*(volatile uint32 *)(0xFF1A0000U + 0x10U)) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_crc.h b/include/arch/rm46l8lp/halcogen/reg_crc.h new file mode 100644 index 0000000..7ba7df6 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_crc.h @@ -0,0 +1,127 @@ +/** @file reg_crc.h +* @brief CRC Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the CRC driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_CRC_H__ +#define __REG_CRC_H__ + +#include "sys_common.h" + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Crc Register Frame Definition */ +/** @struct crcBase +* @brief CRC Register Frame Definition +* +* This type is used to access the CRC Registers. +*/ +/** @typedef crcBASE_t +* @brief CRC Register Frame Type Definition +* +* This type is used to access the CRC Registers. +*/ +typedef volatile struct crcBase +{ + uint32 CTRL0; /**< 0x0000: Global Control Register 0 >**/ + uint32 rvd1; /**< 0x0004: reserved >**/ + uint32 CTRL1; /**< 0x0008: Global Control Register 1 >**/ + uint32 rvd2; /**< 0x000C: reserved >**/ + uint32 CTRL2; /**< 0x0010: Global Control Register 2 >**/ + uint32 rvd3; /**< 0x0014: reserved >**/ + uint32 INTS; /**< 0x0018: Interrupt Enable Set Register >**/ + uint32 rvd4; /**< 0x001C: reserved >**/ + uint32 INTR; /**< 0x0020: Interrupt Enable Reset Register >**/ + uint32 rvd5; /**< 0x0024: reserved >**/ + uint32 STATUS; /**< 0x0028: Interrupt Status Register >**/ + uint32 rvd6; /**< 0x002C: reserved >**/ + uint32 INT_OFFSET_REG; /**< 0x0030: Interrupt Offset >**/ + uint32 rvd7; /**< 0x0034: reserved >**/ + uint32 BUSY; /**< 0x0038: CRC Busy Register >**/ + uint32 rvd8; /**< 0x003C: reserved >**/ + uint32 PCOUNT_REG1; /**< 0x0040: Pattern Counter Preload Register1 >**/ + uint32 SCOUNT_REG1; /**< 0x0044: Sector Counter Preload Register1 >**/ + uint32 CURSEC_REG1; /**< 0x0048: Current Sector Register 1 >**/ + uint32 WDTOPLD1; /**< 0x004C: Channel 1 Watchdog Timeout Preload Register A >**/ + uint32 BCTOPLD1; /**< 0x0050: Channel 1 Block Complete Timeout Preload Register B >**/ + uint32 rvd9[3]; /**< 0x0054: reserved >**/ + uint32 PSA_SIGREGL1; /**< 0x0060: Channel 1 PSA signature low register >**/ + uint32 PSA_SIGREGH1; /**< 0x0064: Channel 1 PSA signature high register >**/ + uint32 REGL1; /**< 0x0068: Channel 1 CRC value low register >**/ + uint32 REGH1; /**< 0x006C: Channel 1 CRC value high register >**/ + uint32 PSA_SECSIGREGL1; /**< 0x0070: Channel 1 PSA sector signature low register >**/ + uint32 PSA_SECSIGREGH1; /**< 0x0074: Channel 1 PSA sector signature high register >**/ + uint32 RAW_DATAREGL1; /**< 0x0078: Channel 1 Raw Data Low Register >**/ + uint32 RAW_DATAREGH1; /**< 0x007C: Channel 1 Raw Data High Register >**/ + uint32 PCOUNT_REG2; /**< 0x0080: CRC Pattern Counter Preload Register2 >**/ + uint32 SCOUNT_REG2; /**< 0x0084: Sector Counter Preload Register2 >**/ + uint32 CURSEC_REG2; /**< 0x0088: Current Sector Register 2>**/ + uint32 WDTOPLD2; /**< 0x008C: Channel 2 Watchdog Timeout Preload Register A >**/ + uint32 BCTOPLD2; /**< 0x0090: Channel 2 Block Complete Timeout Preload Register B >**/ + uint32 rvd10[3]; /**< 0x0094: reserved >**/ + uint32 PSA_SIGREGL2; /**< 0x00A0: Channel 2 PSA signature low register >**/ + uint32 PSA_SIGREGH2; /**< 0x00A4: Channel 2 PSA signature high register >**/ + uint32 REGL2; /**< 0x00A8: Channel 2 CRC value low register >**/ + uint32 REGH2; /**< 0x00AC: Channel 2 CRC value high register >**/ + uint32 PSA_SECSIGREGL2; /**< 0x00B0: Channel 2 PSA sector signature low register >**/ + uint32 PSA_SECSIGREGH2; /**< 0x00B4: Channel 2 PSA sector signature high register >**/ + uint32 RAW_DATAREGL2; /**< 0x00B8: Channel 2 Raw Data Low Register >**/ + uint32 RAW_DATAREGH2; /**< 0x00BC: Channel 2 Raw Data High Register >**/ +}crcBASE_t; + +/** @def crcREG +* @brief CRC Register Frame Pointer +* +* This pointer is used by the CRC driver to access the CRC registers. +*/ +#define crcREG ((crcBASE_t *)0xFE000000U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_dcc.h b/include/arch/rm46l8lp/halcogen/reg_dcc.h new file mode 100644 index 0000000..7edde03 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_dcc.h @@ -0,0 +1,103 @@ +/** @file reg_dcc.h +* @brief DCC Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the DCC driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_DCC_H__ +#define __REG_DCC_H__ + +#include "sys_common.h" + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Dcc Register Frame Definition */ +/** @struct dccBase +* @brief DCC Base Register Definition +* +* This structure is used to access the DCC module registers. +*/ +/** @typedef dccBASE_t +* @brief DCC Register Frame Type Definition +* +* This type is used to access the DCC Registers. +*/ +typedef volatile struct dccBase +{ + uint32 GCTRL; /**< 0x0000: DCC Control Register */ + uint32 REV; /**< 0x0004: DCC Revision Id Register */ + uint32 CNT0SEED; /**< 0x0008: DCC Counter0 Seed Register */ + uint32 VALID0SEED; /**< 0x000C: DCC Valid0 Seed Register */ + uint32 CNT1SEED; /**< 0x0010: DCC Counter1 Seed Register */ + uint32 STAT; /**< 0x0014: DCC Status Register */ + uint32 CNT0; /**< 0x0018: DCC Counter0 Value Register */ + uint32 VALID0; /**< 0x001C: DCC Valid0 Value Register */ + uint32 CNT1; /**< 0x0020: DCC Counter1 Value Register */ + uint32 CNT1CLKSRC; /**< 0x0024: DCC Counter1 Clock Source Selection Register */ + uint32 CNT0CLKSRC; /**< 0x0028: DCC Counter0 Clock Source Selection Register */ +} dccBASE_t; + + +/** @def dccREG1 +* @brief DCC1 Register Frame Pointer +* +* This pointer is used by the DCC driver to access the dcc2 module registers. +*/ +#define dccREG1 ((dccBASE_t *)0xFFFFEC00U) + + +/** @def dccREG2 +* @brief DCC2 Register Frame Pointer +* +* This pointer is used by the DCC driver to access the dcc2 module registers. +*/ +#define dccREG2 ((dccBASE_t *)0xFFFFF400U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_dma.h b/include/arch/rm46l8lp/halcogen/reg_dma.h new file mode 100644 index 0000000..60cc45f --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_dma.h @@ -0,0 +1,185 @@ +/** @file reg_dma.h +* @brief DMA Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* . +* which are relevant for the DMA driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_DMA_H__ +#define __REG_DMA_H__ + +#include "sys_common.h" + +#ifdef __cplusplus +extern "C" { +#endif +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* DMA Register Frame Definition */ +/** @struct dmaBase +* @brief DMA Register Frame Definition +* +* This type is used to access the DMA Registers. +*/ +/** @struct dmaBASE_t +* @brief DMA Register Definition +* +* This structure is used to access the DMA module egisters. +*/ +typedef volatile struct dmaBase +{ + + uint32 GCTRL; /**< 0x0000: Global Control Register */ + uint32 PEND; /**< 0x0004: Channel Pending Register */ + uint32 FBREG; /**< 0x0008: Fall Back Register */ + uint32 DMASTAT; /**< 0x000C: Status Register */ + uint32 rsvd1; /**< 0x0010: Reserved */ + uint32 HWCHENAS; /**< 0x0014: HW Channel Enable Set */ + uint32 rsvd2; /**< 0x0018: Reserved */ + uint32 HWCHENAR; /**< 0x001C: HW Channel Enable Reset */ + uint32 rsvd3; /**< 0x0020: Reserved */ + uint32 SWCHENAS; /**< 0x0024: SW Channel Enable Set */ + uint32 rsvd4; /**< 0x0028: Reserved */ + uint32 SWCHENAR; /**< 0x002C: SW Channel Enable Reset */ + uint32 rsvd5; /**< 0x0030: Reserved */ + uint32 CHPRIOS; /**< 0x0034: Channel Priority Set */ + uint32 rsvd6; /**< 0x0038: Reserved */ + uint32 CHPRIOR; /**< 0x003C: Channel Priority Reset */ + uint32 rsvd7; /**< 0x0040: Reserved */ + uint32 GCHIENAS; /**< 0x0044: Global Channel Interrupt Enable Set */ + uint32 rsvd8; /**< 0x0048: Reserved */ + uint32 GCHIENAR; /**< 0x004C: Global Channel Interrupt Enable Reset */ + uint32 rsvd9; /**< 0x0050: Reserved */ + uint32 DREQASI[8U]; /**< 0x0054 - 0x70: DMA Request Assignment Register */ + uint32 rsvd10[8U]; /**< 0x0074 - 0x90: Reserved */ + uint32 PAR[4U]; /**< 0x0094 - 0xA0: Port Assignment Register */ + uint32 rsvd11[4U]; /**< 0x00A4 - 0xB0: Reserved */ + uint32 FTCMAP; /**< 0x00B4: FTC Interrupt Mapping Register */ + uint32 rsvd12; /**< 0x00B8: Reserved */ + uint32 LFSMAP; /**< 0x00BC: LFS Interrupt Mapping Register */ + uint32 rsvd13; /**< 0x00C0: Reserved */ + uint32 HBCMAP; /**< 0x00C4: HBC Interrupt Mapping Register */ + uint32 rsvd14; /**< 0x00C8: Reserved */ + uint32 BTCMAP; /**< 0x00CC: BTC Interrupt Mapping Register */ + uint32 rsvd15; /**< 0x00D0: Reserved */ + uint32 BERMAP; /**< 0x00D4: BER Interrupt Mapping Register */ + uint32 rsvd16; /**< 0x00D8: Reserved */ + uint32 FTCINTENAS; /**< 0x00DC: FTC Interrupt Enable Set */ + uint32 rsvd17; /**< 0x00E0: Reserved */ + uint32 FTCINTENAR; /**< 0x00E4: FTC Interrupt Enable Reset */ + uint32 rsvd18; /**< 0x00E8: Reserved */ + uint32 LFSINTENAS; /**< 0x00EC: LFS Interrupt Enable Set */ + uint32 rsvd19; /**< 0x00F0: Reserved */ + uint32 LFSINTENAR; /**< 0x00F4: LFS Interrupt Enable Reset */ + uint32 rsvd20; /**< 0x00F8: Reserved */ + uint32 HBCINTENAS; /**< 0x00FC: HBC Interrupt Enable Set */ + uint32 rsvd21; /**< 0x0100: Reserved */ + uint32 HBCINTENAR; /**< 0x0104: HBC Interrupt Enable Reset */ + uint32 rsvd22; /**< 0x0108: Reserved */ + uint32 BTCINTENAS; /**< 0x010C: BTC Interrupt Enable Set */ + uint32 rsvd23; /**< 0x0110: Reserved */ + uint32 BTCINTENAR; /**< 0x0114: BTC Interrupt Enable Reset */ + uint32 rsvd24; /**< 0x0118: Reserved */ + uint32 GINTFLAG; /**< 0x011C: Global Interrupt Flag Register */ + uint32 rsvd25; /**< 0x0120: Reserved */ + uint32 FTCFLAG; /**< 0x0124: FTC Interrupt Flag Register */ + uint32 rsvd26; /**< 0x0128: Reserved */ + uint32 LFSFLAG; /**< 0x012C: LFS Interrupt Flag Register */ + uint32 rsvd27; /**< 0x0130: Reserved */ + uint32 HBCFLAG; /**< 0x0134: HBC Interrupt Flag Register */ + uint32 rsvd28; /**< 0x0138: Reserved */ + uint32 BTCFLAG; /**< 0x013C: BTC Interrupt Flag Register */ + uint32 rsvd29; /**< 0x0140: Reserved */ + uint32 BERFLAG; /**< 0x0144: BER Interrupt Flag Register */ + uint32 rsvd30; /**< 0x0148: Reserved */ + uint32 FTCAOFFSET; /**< 0x014C: FTCA Interrupt Channel Offset Register */ + uint32 LFSAOFFSET; /**< 0x0150: LFSA Interrupt Channel Offset Register */ + uint32 HBCAOFFSET; /**< 0x0154: HBCA Interrupt Channel Offset Register */ + uint32 BTCAOFFSET; /**< 0x0158: BTCA Interrupt Channel Offset Register */ + uint32 BERAOFFSET; /**< 0x015C: BERA Interrupt Channel Offset Register */ + uint32 FTCBOFFSET; /**< 0x0160: FTCB Interrupt Channel Offset Register */ + uint32 LFSBOFFSET; /**< 0x0164: LFSB Interrupt Channel Offset Register */ + uint32 HBCBOFFSET; /**< 0x0168: HBCB Interrupt Channel Offset Register */ + uint32 BTCBOFFSET; /**< 0x016C: BTCB Interrupt Channel Offset Register */ + uint32 BERBOFFSET; /**< 0x0170: BERB Interrupt Channel Offset Register */ + uint32 rsvd31; /**< 0x0174: Reserved */ + uint32 PTCRL; /**< 0x0178: Port Control Register */ + uint32 RTCTRL; /**< 0x017C: RAM Test Control Register */ + uint32 DCTRL; /**< 0x0180: Debug Control */ + uint32 WPR; /**< 0x0184: Watch Point Register */ + uint32 WMR; /**< 0x0188: Watch Mask Register */ + uint32 PAACSADDR; /**< 0x018C: */ + uint32 PAACDADDR; /**< 0x0190: */ + uint32 PAACTC; /**< 0x0194: */ + uint32 PBACSADDR; /**< 0x0198: Port B Active Channel Source Address Register */ + uint32 PBACDADDR; /**< 0x019C: Port B Active Channel Destination Address Register */ + uint32 PBACTC; /**< 0x01A0: Port B Active Channel Transfer Count Register */ + uint32 rsvd32; /**< 0x01A4: Reserved */ + uint32 DMAPCR; /**< 0x01A8: Parity Control Register */ + uint32 DMAPAR; /**< 0x01AC: DMA Parity Error Address Register */ + uint32 DMAMPCTRL; /**< 0x01B0: DMA Memory Protection Control Register */ + uint32 DMAMPST; /**< 0x01B4: DMA Memory Protection Status Register */ + struct + { + uint32 STARTADD; /**< 0x01B8, 0x01C0, 0x01C8, 0x1D0: DMA Memory Protection Region Start Address Register */ + uint32 ENDADD; /**< 0x01B8, 0x01C0, 0x01C8, 0x1D0: DMA Memory Protection Region Start Address Register */ + }DMAMPR[4U]; +} dmaBASE_t; + + +/** @def dmaREG +* @brief DMA1 Register Frame Pointer +* +* This pointer is used by the DMA driver to access the DMA module registers. +*/ +#define dmaREG ((dmaBASE_t *)0xFFFFF000U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_ecap.h b/include/arch/rm46l8lp/halcogen/reg_ecap.h new file mode 100644 index 0000000..9bfb07b --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_ecap.h @@ -0,0 +1,159 @@ +/** @file reg_ecap.h +* @brief ECAP Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the ECAP driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_ECAP_H__ +#define __REG_ECAP_H__ + +#include "sys_common.h" + + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Ecap Register Frame Definition */ +/** @struct ecapBASE +* @brief ECAP Register Frame Definition +* +* This type is used to access the ECAP Registers. +*/ +/** @typedef ecapBASE_t +* @brief ECAP Register Frame Type Definition +* +* This type is used to access the ECAP Registers. +*/ +#if ((__little_endian__ == 1) || (__LITTLE_ENDIAN__ == 1)) + +typedef volatile struct ecapBASE + { + uint32 TSCTR; /**< 0x0000 Time stamp counter Register*/ + uint32 CTRPHS; /**< 0x0004 Counter phase Register*/ + uint32 CAP1; /**< 0x0008 Capture 1 Register*/ + uint32 CAP2; /**< 0x000C Capture 2 Register*/ + uint32 CAP3; /**< 0x0010 Capture 3 Register*/ + uint32 CAP4; /**< 0x0014 Capture 4 Register*/ + uint16 rsvd1[8U]; /**< 0x0018 Reserved*/ + uint16 ECCTL1; /**< 0x0028 Capture Control Reg 1 Register*/ + uint16 ECCTL2; /**< 0x002A Capture Control Reg 2 Register*/ + uint16 ECEINT; /**< 0x002C Interrupt enable Register*/ + uint16 ECFLG; /**< 0x002E Interrupt flags Register*/ + uint16 ECCLR; /**< 0x0030 Interrupt clear Register*/ + uint16 ECFRC; /**< 0x0032 Interrupt force Register*/ + uint16 rsvd2[6U]; /**< 0x0034 Reserved*/ + +}ecapBASE_t; + +#else + +typedef volatile struct ecapBASE + { + uint32 TSCTR; /**< 0x0000 Time stamp counter Register*/ + uint32 CTRPHS; /**< 0x0004 Counter phase Register*/ + uint32 CAP1; /**< 0x0008 Capture 1 Register*/ + uint32 CAP2; /**< 0x000C Capture 2 Register*/ + uint32 CAP3; /**< 0x0010 Capture 3 Register*/ + uint32 CAP4; /**< 0x0014 Capture 4 Register*/ + uint16 rsvd1[8U]; /**< 0x0018 Reserved*/ + uint16 ECCTL2; /**< 0x002A Capture Control Reg 2 Register*/ + uint16 ECCTL1; /**< 0x0028 Capture Control Reg 1 Register*/ + uint16 ECFLG; /**< 0x002E Interrupt flags Register*/ + uint16 ECEINT; /**< 0x002C Interrupt enable Register*/ + uint16 ECFRC; /**< 0x0032 Interrupt force Register*/ + uint16 ECCLR; /**< 0x0030 Interrupt clear Register*/ + uint16 rsvd2[6U]; /**< 0x0034 Reserved*/ + +}ecapBASE_t; + +#endif +/** @def ecapREG1 +* @brief ECAP1 Register Frame Pointer +* +* This pointer is used by the ECAP driver to access the ECAP1 registers. +*/ +#define ecapREG1 ((ecapBASE_t *)0xFCF79300U) + +/** @def ecapREG2 +* @brief ECAP2 Register Frame Pointer +* +* This pointer is used by the ECAP driver to access the ECAP2 registers. +*/ +#define ecapREG2 ((ecapBASE_t *)0xFCF79400U) + +/** @def ecapREG3 +* @brief ECAP3 Register Frame Pointer +* +* This pointer is used by the ECAP driver to access the ECAP3 registers. +*/ +#define ecapREG3 ((ecapBASE_t *)0xFCF79500U) + +/** @def ecapREG4 +* @brief ECAP4 Register Frame Pointer +* +* This pointer is used by the ECAP driver to access the ECAP4 registers. +*/ +#define ecapREG4 ((ecapBASE_t *)0xFCF79600U) + +/** @def ecapREG5 +* @brief ECAP5 Register Frame Pointer +* +* This pointer is used by the ECAP driver to access the ECAP5 registers. +*/ +#define ecapREG5 ((ecapBASE_t *)0xFCF79700U) + +/** @def ecapREG6 +* @brief ECAP6 Register Frame Pointer +* +* This pointer is used by the ECAP driver to access the ECAP6 registers. +*/ +#define ecapREG6 ((ecapBASE_t *)0xFCF79800U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_efc.h b/include/arch/rm46l8lp/halcogen/reg_efc.h new file mode 100644 index 0000000..1890288 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_efc.h @@ -0,0 +1,96 @@ +/** @file reg_efc.h +* @brief EFC Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* . +* which are relevant for the System driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_EFC_H__ +#define __REG_EFC_H__ + +#include "sys_common.h" + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Efc Register Frame Definition */ +/** @struct efcBase +* @brief Efc Register Frame Definition +* +* This type is used to access the Efc Registers. +*/ +/** @typedef efcBASE_t +* @brief Efc Register Frame Type Definition +* +* This type is used to access the Efc Registers. +*/ +typedef volatile struct efcBase +{ + uint32 INSTRUCTION; /* 0x0 INSTRUCTION AN DUMPWORD REGISTER */ + uint32 ADDRESS; /* 0x4 ADDRESS REGISTER */ + uint32 DATA_UPPER; /* 0x8 DATA UPPER REGISTER */ + uint32 DATA_LOWER; /* 0xc DATA LOWER REGISTER */ + uint32 SYSTEM_CONFIG; /* 0x10 SYSTEM CONFIG REGISTER */ + uint32 SYSTEM_STATUS; /* 0x14 SYSTEM STATUS REGISTER */ + uint32 ACCUMULATOR; /* 0x18 ACCUMULATOR REGISTER */ + uint32 BOUNDARY; /* 0x1C BOUNDARY REGISTER */ + uint32 KEY_FLAG; /* 0x20 KEY FLAG REGISTER */ + uint32 KEY; /* 0x24 KEY REGISTER */ + uint32 rsvd1; /* 0x28 RESERVED */ + uint32 PINS; /* 0x2C PINS REGISTER */ + uint32 CRA; /* 0x30 CRA */ + uint32 READ; /* 0x34 READ REGISTER */ + uint32 PROGRAMME; /* 0x38 PROGRAMME REGISTER */ + uint32 ERROR; /* 0x3C ERROR STATUS REGISTER */ + uint32 SINGLE_BIT; /* 0x40 SINGLE BIT ERROR */ + uint32 TWO_BIT_ERROR; /* 0x44 DOUBLE BIT ERROR */ + uint32 SELF_TEST_CYCLES; /* 0x48 SELF TEST CYCLEX */ + uint32 SELF_TEST_SIGN; /* 0x4C SELF TEST SIGNATURE */ +} efcBASE_t; + +#define efcREG ((efcBASE_t *)0xFFF8C000U) +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_eqep.h b/include/arch/rm46l8lp/halcogen/reg_eqep.h new file mode 100644 index 0000000..39342c6 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_eqep.h @@ -0,0 +1,151 @@ +/** @file reg_eqep.h +* @brief EQEP Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the EQEP driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_EQEP_H__ +#define __REG_EQEP_H__ + +#include "sys_common.h" + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Eqep Register Frame Definition */ +/** @struct eqepBASE +* @brief EQEP Register Frame Definition +* +* This type is used to access the EQEP Registers. +*/ +/** @typedef eqepBASE_t +* @brief EQEP Register Frame Type Definition +* +* This type is used to access the EQEP Registers. +*/ +#if ((__little_endian__ == 1) || (__LITTLE_ENDIAN__ == 1)) + +typedef volatile struct eqepBASE +{ + uint32 QPOSCNT; /*< 0x0000 eQEP Position Counter*/ + uint32 QPOSINIT; /*< 0x0004 eQEP Initialization Position Count*/ + uint32 QPOSMAX; /*< 0x0008 eQEP Maximum Position Count*/ + uint32 QPOSCMP; /*< 0x000C eQEP Position Compare*/ + uint32 QPOSILAT; /*< 0x0010 eQEP Index Position Latch*/ + uint32 QPOSSLAT; /*< 0x0014 eQEP Strobe Position Latch*/ + uint32 QPOSLAT; /*< 0x0018 eQEP Position Latch*/ + uint32 QUTMR; /*< 0x001C eQEP Unit Timer*/ + uint32 QUPRD; /*< 0x0020 eQEP Unit Period*/ + uint16 QWDTMR; /*< 0x0024 eQEP Watchdog Timer*/ + uint16 QWDPRD; /*< 0x0026 eQEP Watchdog Period*/ + uint16 QDECCTL; /*< 0x0028 eQEP Decoder Control*/ + uint16 QEPCTL; /*< 0x002A eQEP Control*/ + uint16 QCAPCTL; /*< 0x002C eQEP Capture Control*/ + uint16 QPOSCTL; /*< 0x002E eQEP Position Compare Control*/ + uint16 QEINT; /*< 0x0030 eQEP Interrupt Enable Register*/ + uint16 QFLG; /*< 0x0032 eQEP Interrupt Flag Register*/ + uint16 QCLR; /*< 0x0034 eQEP Interrupt Clear Register*/ + uint16 QFRC; /*< 0x0036 eQEP Interrupt Force Register*/ + uint16 QEPSTS; /*< 0x0038 eQEP Status Register*/ + uint16 QCTMR; /*< 0x003A eQEP Capture Timer*/ + uint16 QCPRD; /*< 0x003C eQEP Capture Period*/ + uint16 QCTMRLAT; /*< 0x003E eQEP Capture Timer Latch*/ + uint16 QCPRDLAT; /*< 0x0040 eQEP Capture Period Latch*/ + uint16 rsvd_1; /*< 0x0042 Reserved*/ +} eqepBASE_t; + +#else + +typedef volatile struct eqepBASE +{ + uint32 QPOSCNT; /*< 0x0000 eQEP Position Counter*/ + uint32 QPOSINIT; /*< 0x0004 eQEP Initialization Position Count*/ + uint32 QPOSMAX; /*< 0x0008 eQEP Maximum Position Count*/ + uint32 QPOSCMP; /*< 0x000C eQEP Position Compare*/ + uint32 QPOSILAT; /*< 0x0010 eQEP Index Position Latch*/ + uint32 QPOSSLAT; /*< 0x0014 eQEP Strobe Position Latch*/ + uint32 QPOSLAT; /*< 0x0018 eQEP Position Latch*/ + uint32 QUTMR; /*< 0x001C eQEP Unit Timer*/ + uint32 QUPRD; /*< 0x0020 eQEP Unit Period*/ + uint16 QWDPRD; /*< 0x0026 eQEP Watchdog Period*/ + uint16 QWDTMR; /*< 0x0024 eQEP Watchdog Timer*/ + uint16 QEPCTL; /*< 0x002A eQEP Control*/ + uint16 QDECCTL; /*< 0x0028 eQEP Decoder Control*/ + uint16 QPOSCTL; /*< 0x002E eQEP Position Compare Control*/ + uint16 QCAPCTL; /*< 0x002C eQEP Capture Control*/ + uint16 QFLG; /*< 0x0032 eQEP Interrupt Flag Register*/ + uint16 QEINT; /*< 0x0030 eQEP Interrupt Enable Register*/ + uint16 QFRC; /*< 0x0036 eQEP Interrupt Force Register*/ + uint16 QCLR; /*< 0x0034 eQEP Interrupt Clear Register*/ + uint16 QCTMR; /*< 0x003A eQEP Capture Timer*/ + uint16 QEPSTS; /*< 0x0038 eQEP Status Register*/ + uint16 QCTMRLAT; /*< 0x003E eQEP Capture Timer Latch*/ + uint16 QCPRD; /*< 0x003C eQEP Capture Period*/ + uint16 rsvd_1; /*< 0x0042 Reserved*/ + uint16 QCPRDLAT; /*< 0x0040 eQEP Capture Period Latch*/ +} eqepBASE_t; + +#endif + +/** @def eqepREG1 +* @brief eQEP1 Register Frame Pointer +* +* This pointer is used by the eQEP driver to access the eQEP1 registers. +*/ +#define eqepREG1 ((eqepBASE_t *)0xFCF79900U) + +/** @def eqepREG2 +* @brief eQEP2 Register Frame Pointer +* +* This pointer is used by the eQEP driver to access the eQEP2 registers. +*/ +#define eqepREG2 ((eqepBASE_t *)0xFCF79A00U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_esm.h b/include/arch/rm46l8lp/halcogen/reg_esm.h new file mode 100644 index 0000000..ce5f5ab --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_esm.h @@ -0,0 +1,106 @@ +/** @file reg_esm.h +* @brief ESM Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the ESM driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_ESM_H__ +#define __REG_ESM_H__ + +#include "sys_common.h" + + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Esm Register Frame Definition */ +/** @struct esmBase +* @brief Esm Register Frame Definition +* +* This type is used to access the Esm Registers. +*/ +/** @typedef esmBASE_t +* @brief Esm Register Frame Type Definition +* +* This type is used to access the Esm Registers. +*/ +typedef volatile struct esmBase +{ + uint32 EEPAPR1; /* 0x0000 */ + uint32 DEPAPR1; /* 0x0004 */ + uint32 IESR1; /* 0x0008 */ + uint32 IECR1; /* 0x000C */ + uint32 ILSR1; /* 0x0010 */ + uint32 ILCR1; /* 0x0014 */ + uint32 SR1[3U]; /* 0x0018, 0x001C, 0x0020 */ + uint32 EPSR; /* 0x0024 */ + uint32 IOFFHR; /* 0x0028 */ + uint32 IOFFLR; /* 0x002C */ + uint32 LTCR; /* 0x0030 */ + uint32 LTCPR; /* 0x0034 */ + uint32 EKR; /* 0x0038 */ + uint32 SSR2; /* 0x003C */ + uint32 IEPSR4; /* 0x0040 */ + uint32 IEPCR4; /* 0x0044 */ + uint32 IESR4; /* 0x0048 */ + uint32 IECR4; /* 0x004C */ + uint32 ILSR4; /* 0x0050 */ + uint32 ILCR4; /* 0x0054 */ + uint32 SR4[3U]; /* 0x0058, 0x005C, 0x0060 */ +} esmBASE_t; + +/** @def esmREG +* @brief Esm Register Frame Pointer +* +* This pointer is used by the Esm driver to access the Esm registers. +*/ +#define esmREG ((esmBASE_t *)0xFFFFF500U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_etpwm.h b/include/arch/rm46l8lp/halcogen/reg_etpwm.h new file mode 100644 index 0000000..a6b8a8f --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_etpwm.h @@ -0,0 +1,225 @@ +/** @file reg_etpwm.h +* @brief ETPWM Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the ETPWM driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_ETPWM_H__ +#define __REG_ETPWM_H__ + +#include "sys_common.h" + + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* ETPWM Register Frame Definition */ +/** @struct etpwmBASE +* @brief ETPWM Register Frame Definition +* +* This type is used to access the ETPWM Registers. +*/ +/** @typedef etpwmBASE_t +* @brief ETPWM Register Frame Type Definition +* +* This type is used to access the ETPWM Registers. +*/ +#if ((__little_endian__ == 1) || (__LITTLE_ENDIAN__ == 1)) + +typedef volatile struct etpwmBASE +{ + uint16 TBCTL; /**< 0x0000 Time-Base Control Register*/ + uint16 TBSTS; /**< 0x0002 Time-Base Status Register*/ + uint16 rsvd1; /**< 0x0004 Reserved*/ + uint16 TBPHS; /**< 0x0006 Time-Base Phase Register*/ + uint16 TBCTR; /**< 0x0008 Time-Base Counter Register*/ + uint16 TBPRD; /**< 0x000A Time-Base Period Register*/ + uint16 rsvd2; /**< 0x000C Reserved*/ + uint16 CMPCTL; /**< 0x000E Counter-Compare Control Register*/ + uint16 rsvd3; /**< 0x0010 Reserved*/ + uint16 CMPA; /**< 0x0012 Counter-Compare A Register*/ + uint16 CMPB; /**< 0x0014 Counter-Compare B Register*/ + uint16 AQCTLA; /**< 0x0016 Action-Qualifier Control Register for Output A (ETPWMxA)*/ + uint16 AQCTLB; /**< 0x0018 Action-Qualifier Control Register for Output B (ETPWMxB)*/ + uint16 AQSFRC; /**< 0x001A Action-Qualifier Software Force Register*/ + uint16 AQCSFRC; /**< 0x001C Action-Qualifier Continuous S/W Force Register Set*/ + uint16 DBCTL; /**< 0x001E Dead-Band Generator Control Register*/ + uint16 DBRED; /**< 0x0020 Dead-Band Generator Rising Edge Delay Count Register*/ + uint16 DBFED; /**< 0x0022 Dead-Band Generator Falling Edge Delay Count Register*/ + uint16 TZSEL; /**< 0x0024 Trip-Zone Select Register*/ + uint16 TZDCSEL; /**< 0x0026 Trip Zone Digital Compare Select Register*/ + uint16 TZCTL; /**< 0x0028 Trip-Zone Control Register*/ + uint16 TZEINT; /**< 0x002A Trip-Zone Enable Interrupt Register*/ + uint16 TZFLG; /**< 0x002C Trip-Zone Flag Register*/ + uint16 TZCLR; /**< 0x002E Trip-Zone Clear Register*/ + uint16 TZFRC; /**< 0x0030 Trip-Zone Force Register*/ + uint16 ETSEL; /**< 0x0032 Event-Trigger Selection Register*/ + uint16 ETPS; /**< 0x0034 Event-Trigger Pre-Scale Register*/ + uint16 ETFLG; /**< 0x0036 Event-Trigger Flag Register*/ + uint16 ETCLR; /**< 0x0038 Event-Trigger Clear Register*/ + uint16 ETFRC; /**< 0x003A Event-Trigger Force Register*/ + uint16 PCCTL; /**< 0x003C PWM-Chopper Control Register*/ + uint16 rsvd4; /**< 0x003E Reserved*/ + uint16 rsvd5[16U]; /**< 0x0040 Reserved*/ + uint16 DCTRIPSEL; /**< 0x0060 Digital Compare Trip Select Register*/ + uint16 DCACTL; /**< 0x0062 Digital Compare A Control Register*/ + uint16 DCBCTL; /**< 0x0064 Digital Compare B Control Register*/ + uint16 DCFCTL; /**< 0x0066 Digital Compare Filter Control Register*/ + uint16 DCCAPCTL; /**< 0x0068 Digital Compare Capture Control Register*/ + uint16 DCFOFFSET; /**< 0x006A Digital Compare Filter Offset Register*/ + uint16 DCFOFFSETCNT; /**< 0x006C Digital Compare Filter Offset Counter Register*/ + uint16 DCFWINDOW; /**< 0x006E Digital Compare Filter Window Register*/ + uint16 DCFWINDOWCNT; /**< 0x0070 Digital Compare Filter Window Counter Register*/ + uint16 DCCAP; /**< 0x0072 Digital Compare Counter Capture Register*/ +} etpwmBASE_t; + +#else + +typedef volatile struct etpwmBASE +{ + uint16 TBSTS; /**< 0x0000 Time-Base Status Register*/ + uint16 TBCTL; /**< 0x0002 Time-Base Control Register*/ + uint16 TBPHS; /**< 0x0004 Time-Base Phase Register*/ + uint16 rsvd1; /**< 0x0006 Reserved*/ + uint16 TBPRD; /**< 0x0008 Time-Base Period Register*/ + uint16 TBCTR; /**< 0x000A Time-Base Counter Register*/ + uint16 CMPCTL; /**< 0x000C Counter-Compare Control Register*/ + uint16 rsvd2; /**< 0x000E Reserved*/ + uint16 CMPA; /**< 0x0010 Counter-Compare A Register*/ + uint16 rsvd3; /**< 0x0012 Reserved*/ + uint16 AQCTLA; /**< 0x0014 Action-Qualifier Control Register for Output A (ETPWMxA)*/ + uint16 CMPB; /**< 0x0016 Counter-Compare B Register*/ + uint16 AQSFRC; /**< 0x0018 Action-Qualifier Software Force Register*/ + uint16 AQCTLB; /**< 0x001A Action-Qualifier Control Register for Output B (ETPWMxB)*/ + uint16 DBCTL; /**< 0x001C Dead-Band Generator Control Register*/ + uint16 AQCSFRC; /**< 0x001E Action-Qualifier Continuous S/W Force Register Set*/ + uint16 DBFED; /**< 0x0020 Dead-Band Generator Falling Edge Delay Count Register*/ + uint16 DBRED; /**< 0x0022 Dead-Band Generator Rising Edge Delay Count Register*/ + uint16 TZDCSEL; /**< 0x0024 Trip Zone Digital Compare Select Register*/ + uint16 TZSEL; /**< 0x0026 Trip-Zone Select Register*/ + uint16 TZEINT; /**< 0x0028 Trip-Zone Enable Interrupt Register*/ + uint16 TZCTL; /**< 0x002A Trip-Zone Control Register*/ + uint16 TZCLR; /**< 0x002C Trip-Zone Clear Register*/ + uint16 TZFLG; /**< 0x002E Trip-Zone Flag Register*/ + uint16 ETSEL; /**< 0x0030 Event-Trigger Selection Register*/ + uint16 TZFRC; /**< 0x0032 Trip-Zone Force Register*/ + uint16 ETFLG; /**< 0x0034 Event-Trigger Flag Register*/ + uint16 ETPS; /**< 0x0036 Event-Trigger Pre-Scale Register*/ + uint16 ETFRC; /**< 0x0038 Event-Trigger Force Register*/ + uint16 ETCLR; /**< 0x003A Event-Trigger Clear Register*/ + uint16 rsvd4; /**< 0x003C Reserved*/ + uint16 PCCTL; /**< 0x003E PWM-Chopper Control Register*/ + uint16 rsvd5[16U]; /**< 0x0040 Reserved*/ + uint16 DCACTL; /**< 0x0060 Digital Compare A Control Register*/ + uint16 DCTRIPSEL; /**< 0x0062 Digital Compare Trip Select Register*/ + uint16 DCFCTL; /**< 0x0064 Digital Compare Filter Control Register*/ + uint16 DCBCTL; /**< 0x0066 Digital Compare B Control Register*/ + uint16 DCFOFFSET; /**< 0x0068 Digital Compare Filter Offset Register*/ + uint16 DCCAPCTL; /**< 0x006A Digital Compare Capture Control Register*/ + uint16 DCFWINDOW; /**< 0x006C Digital Compare Filter Window Register*/ + uint16 DCFOFFSETCNT; /**< 0x006E Digital Compare Filter Offset Counter Register*/ + uint16 DCCAP; /**< 0x0070 Digital Compare Counter Capture Register*/ + uint16 DCFWINDOWCNT; /**< 0x0072 Digital Compare Filter Window Counter Register*/ +} etpwmBASE_t; + +#endif + + + +/** @def etpwmREG1 +* @brief ETPWM1 Register Frame Pointer +* +* This pointer is used by the ETPWM driver to access the ETPWM1 registers. +*/ +#define etpwmREG1 ((etpwmBASE_t *)0xFCF78C00U) + +/** @def etpwmREG2 +* @brief ETPWM2 Register Frame Pointer +* +* This pointer is used by the ETPWM driver to access the ETPWM2 registers. +*/ +#define etpwmREG2 ((etpwmBASE_t *)0xFCF78D00U) + +/** @def etpwmREG3 +* @brief ETPWM3 Register Frame Pointer +* +* This pointer is used by the ETPWM driver to access the ETPWM3 registers. +*/ +#define etpwmREG3 ((etpwmBASE_t *)0xFCF78E00U) + +/** @def etpwmREG4 +* @brief ETPWM4 Register Frame Pointer +* +* This pointer is used by the ETPWM driver to access the ETPWM4 registers. +*/ +#define etpwmREG4 ((etpwmBASE_t *)0xFCF78F00U) + +/** @def etpwmREG5 +* @brief ETPWM5 Register Frame Pointer +* +* This pointer is used by the ETPWM driver to access the ETPWM5 registers. +*/ +#define etpwmREG5 ((etpwmBASE_t *)0xFCF79000U) + +/** @def etpwmREG6 +* @brief ETPWM6 Register Frame Pointer +* +* This pointer is used by the ETPWM driver to access the ETPWM6 registers. +*/ +#define etpwmREG6 ((etpwmBASE_t *)0xFCF79100U) + +/** @def etpwmREG7 +* @brief ETPWM7 Register Frame Pointer +* +* This pointer is used by the ETPWM driver to access the ETPWM7 registers. +*/ +#define etpwmREG7 ((etpwmBASE_t *)0xFCF79200U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_flash.h b/include/arch/rm46l8lp/halcogen/reg_flash.h new file mode 100644 index 0000000..b50da1e --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_flash.h @@ -0,0 +1,134 @@ +/** @file reg_flash.h +* @brief Flash Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* . +* which are relevant for the System driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_FLASH_H__ +#define __REG_FLASH_H__ + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +#include "sys_common.h" + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/* Flash Register Frame Definition */ +/** @struct flashWBase +* @brief Flash Wrapper Register Frame Definition +* +* This type is used to access the Flash Wrapper Registers. +*/ +/** @typedef flashWBASE_t +* @brief Flash Wrapper Register Frame Type Definition +* +* This type is used to access the Flash Wrapper Registers. +*/ +typedef volatile struct flashWBase +{ + uint32 FRDCNTL; /* 0x0000 */ + uint32 rsvd1; /* 0x0004 */ + uint32 FEDACCTRL1; /* 0x0008 */ + uint32 FEDACCTRL2; /* 0x000C */ + uint32 FCORERRCNT; /* 0x0010 */ + uint32 FCORERRADD; /* 0x0014 */ + uint32 FCORERRPOS; /* 0x0018 */ + uint32 FEDACSTATUS; /* 0x001C */ + uint32 FUNCERRADD; /* 0x0020 */ + uint32 FEDACSDIS; /* 0x0024 */ + uint32 FPRIMADDTAG; /* 0x0028 */ + uint32 FREDUADDTAG; /* 0x002C */ + uint32 FBPROT; /* 0x0030 */ + uint32 FBSE; /* 0x0034 */ + uint32 FBBUSY; /* 0x0038 */ + uint32 FBAC; /* 0x003C */ + uint32 FBFALLBACK; /* 0x0040 */ + uint32 FBPRDY; /* 0x0044 */ + uint32 FPAC1; /* 0x0048 */ + uint32 FPAC2; /* 0x004C */ + uint32 FMAC; /* 0x0050 */ + uint32 FMSTAT; /* 0x0054 */ + uint32 FEMUDMSW; /* 0x0058 */ + uint32 FEMUDLSW; /* 0x005C */ + uint32 FEMUECC; /* 0x0060 */ + uint32 FLOCK; /* 0x0064 */ + uint32 FEMUADDR; /* 0x0068 */ + uint32 FDIAGCTRL; /* 0x006C */ + uint32 FRAWDATAH; /* 0x0070 */ + uint32 FRAWDATAL; /* 0x0074 */ + uint32 FRAWECC; /* 0x0078 */ + uint32 FPAROVR; /* 0x007C */ + uint32 rsvd2[16U]; /* 0x009C */ + uint32 FEDACSDIS2; /* 0x00C0 */ + uint32 rsvd3[15U]; /* 0x00C4 */ + uint32 rsvd4[13U]; /* 0x0100 */ + uint32 rsvd5[85U]; /* 0x0134 */ + uint32 FSMWRENA; /* 0x0288 */ + uint32 rsvd6[6U]; /* 0x028C */ + uint32 FSMSECTOR; /* 0x02A4 */ + uint32 rsvd7[4U]; /* 0x02A8 */ + uint32 EEPROMCONFIG; /* 0x02B8 */ + uint32 rsvd8[19U]; /* 0x02BC */ + uint32 EECTRL1; /* 0x0308 */ + uint32 EECTRL2; /* 0x030C */ + uint32 EECORRERRCNT; /* 0x0310 */ + uint32 EECORRERRADD; /* 0x0314 */ + uint32 EECORRERRPOS; /* 0x0318 */ + uint32 EESTATUS; /* 0x031C */ + uint32 EEUNCERRADD; /* 0x0320 */ +} flashWBASE_t; + +/** @def flashWREG +* @brief Flash Wrapper Register Frame Pointer +* +* This pointer is used by the system driver to access the flash wrapper registers. +*/ +#define flashWREG ((flashWBASE_t *)(0xFFF87000U)) + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_gio.h b/include/arch/rm46l8lp/halcogen/reg_gio.h new file mode 100644 index 0000000..d845205 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_gio.h @@ -0,0 +1,134 @@ +/** @file reg_gio.h +* @brief GIO Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the GIO driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_GIO_H__ +#define __REG_GIO_H__ + +#include "sys_common.h" + + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Gio Register Frame Definition */ +/** @struct gioBase +* @brief GIO Base Register Definition +* +* This structure is used to access the GIO module registers. +*/ +/** @typedef gioBASE_t +* @brief GIO Register Frame Type Definition +* +* This type is used to access the GIO Registers. +*/ +typedef volatile struct gioBase +{ + uint32 GCR0; /**< 0x0000: Global Control Register */ + uint32 rsvd; /**< 0x0004: Reserved*/ + uint32 INTDET; /**< 0x0008: Interrupt Detect Register*/ + uint32 POL; /**< 0x000C: Interrupt Polarity Register */ + uint32 ENASET; /**< 0x0010: Interrupt Enable Set Register */ + uint32 ENACLR; /**< 0x0014: Interrupt Enable Clear Register */ + uint32 LVLSET; /**< 0x0018: Interrupt Priority Set Register */ + uint32 LVLCLR; /**< 0x001C: Interrupt Priority Clear Register */ + uint32 FLG; /**< 0x0020: Interrupt Flag Register */ + uint32 OFF1; /**< 0x0024: Interrupt Offset A Register */ + uint32 OFF2; /**< 0x0028: Interrupt Offset B Register */ + uint32 EMU1; /**< 0x002C: Emulation 1 Register */ + uint32 EMU2; /**< 0x0030: Emulation 2 Register */ +} gioBASE_t; + + +/** @struct gioPort +* @brief GIO Port Register Definition +*/ +/** @typedef gioPORT_t +* @brief GIO Port Register Type Definition +* +* This type is used to access the GIO Port Registers. +*/ +typedef volatile struct gioPort +{ + uint32 DIR; /**< 0x0000: Data Direction Register */ + uint32 DIN; /**< 0x0004: Data Input Register */ + uint32 DOUT; /**< 0x0008: Data Output Register */ + uint32 DSET; /**< 0x000C: Data Output Set Register */ + uint32 DCLR; /**< 0x0010: Data Output Clear Register */ + uint32 PDR; /**< 0x0014: Open Drain Register */ + uint32 PULDIS; /**< 0x0018: Pullup Disable Register */ + uint32 PSL; /**< 0x001C: Pull Up/Down Selection Register */ +} gioPORT_t; + + +/** @def gioREG +* @brief GIO Register Frame Pointer +* +* This pointer is used by the GIO driver to access the gio module registers. +*/ +#define gioREG ((gioBASE_t *)0xFFF7BC00U) + +/** @def gioPORTA +* @brief GIO Port (A) Register Pointer +* +* Pointer used by the GIO driver to access PORTA +*/ +#define gioPORTA ((gioPORT_t *)0xFFF7BC34U) + +/** @def gioPORTB +* @brief GIO Port (B) Register Pointer +* +* Pointer used by the GIO driver to access PORTB +*/ +#define gioPORTB ((gioPORT_t *)0xFFF7BC54U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_het.h b/include/arch/rm46l8lp/halcogen/reg_het.h new file mode 100644 index 0000000..f2d70eb --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_het.h @@ -0,0 +1,203 @@ +/** @file reg_het.h +* @brief HET Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the HET driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_HET_H__ +#define __REG_HET_H__ + +#include "sys_common.h" +#include "reg_gio.h" + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Het Register Frame Definition */ +/** @struct hetBase +* @brief HET Base Register Definition +* +* This structure is used to access the HET module registers. +*/ +/** @typedef hetBASE_t +* @brief HET Register Frame Type Definition +* +* This type is used to access the HET Registers. +*/ + +typedef volatile struct hetBase +{ + uint32 GCR; /**< 0x0000: Global control register */ + uint32 PFR; /**< 0x0004: Prescale factor register */ + uint32 ADDR; /**< 0x0008: Current address register */ + uint32 OFF1; /**< 0x000C: Interrupt offset register 1 */ + uint32 OFF2; /**< 0x0010: Interrupt offset register 2 */ + uint32 INTENAS; /**< 0x0014: Interrupt enable set register */ + uint32 INTENAC; /**< 0x0018: Interrupt enable clear register */ + uint32 EXC1; /**< 0x001C: Exception control register 1 */ + uint32 EXC2; /**< 0x0020: Exception control register 2 */ + uint32 PRY; /**< 0x0024: Interrupt priority register */ + uint32 FLG; /**< 0x0028: Interrupt flag register */ + uint32 AND; /**< 0x002C: AND share control register */ + uint32 rsvd1; /**< 0x0030: Reserved */ + uint32 HRSH; /**< 0x0034: High resolution share register */ + uint32 XOR; /**< 0x0038: XOR share register */ + uint32 REQENS; /**< 0x003C: Request enable set register */ + uint32 REQENC; /**< 0x0040: Request enable clear register */ + uint32 REQDS; /**< 0x0044: Request destination select register */ + uint32 rsvd2; /**< 0x0048: Reserved */ + uint32 DIR; /**< 0x004C: Direction register */ + uint32 DIN; /**< 0x0050: Data input register */ + uint32 DOUT; /**< 0x0054: Data output register */ + uint32 DSET; /**< 0x0058: Data output set register */ + uint32 DCLR; /**< 0x005C: Data output clear register */ + uint32 PDR; /**< 0x0060: Open drain register */ + uint32 PULDIS; /**< 0x0064: Pull disable register */ + uint32 PSL; /**< 0x0068: Pull select register */ + uint32 rsvd3; /**< 0x006C: Reserved */ + uint32 rsvd4; /**< 0x0070: Reserved */ + uint32 PCR; /**< 0x0074: Parity control register */ + uint32 PAR; /**< 0x0078: Parity address register */ + uint32 PPR; /**< 0x007C: Parity pin select register */ + uint32 SFPRLD; /**< 0x0080: Suppression filter preload register */ + uint32 SFENA; /**< 0x0084: Suppression filter enable register */ + uint32 rsvd5; /**< 0x0088: Reserved */ + uint32 LBPSEL; /**< 0x008C: Loop back pair select register */ + uint32 LBPDIR; /**< 0x0090: Loop back pair direction register */ + uint32 PINDIS; /**< 0x0094: Pin disable register */ +} hetBASE_t; + + +/** @struct hetInstructionBase +* @brief HET Instruction Definition +* +* This structure is used to access the HET RAM. +*/ +/** @typedef hetINSTRUCTION_t +* @brief HET Instruction Type Definition +* +* This type is used to access a HET Instruction. +*/ +typedef volatile struct hetInstructionBase +{ + uint32 Program; + uint32 Control; + uint32 Data; + uint32 rsvd1; +} hetINSTRUCTION_t; + + +/** @struct hetRamBase +* @brief HET RAM Definition +* +* This structure is used to access the HET RAM. +*/ +/** @typedef hetRAMBASE_t +* @brief HET RAM Type Definition +* +* This type is used to access the HET RAM. +*/ +typedef volatile struct het1RamBase +{ + hetINSTRUCTION_t Instruction[160U]; +} hetRAMBASE_t; + + +/** @def hetREG1 +* @brief HET Register Frame Pointer +* +* This pointer is used by the HET driver to access the het module registers. +*/ +#define hetREG1 ((hetBASE_t *)0xFFF7B800U) + + +/** @def hetPORT1 +* @brief HET GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of HET1 +* (use the GIO drivers to access the port pins). +*/ +#define hetPORT1 ((gioPORT_t *)0xFFF7B84CU) + +/** @def hetRAM1 +* @brief NHET1 RAM Pointer +* +* This pointer is used by the HET driver to access the NHET1 memory. +*/ +#define hetRAM1 ((hetRAMBASE_t *)0xFF460000U) + +#define NHET1RAMPARLOC (*(volatile uint32 *)0xFF462000U) +#define NHET1RAMLOC (*(volatile uint32 *)0xFF460000U) + +/** @def hetREG2 +* @brief HET2 Register Frame Pointer +* +* This pointer is used by the HET driver to access the het module registers. +*/ +#define hetREG2 ((hetBASE_t *)0xFFF7B900U) + +/** @def hetPORT2 +* @brief HET2 GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of HET2 +* (use the GIO drivers to access the port pins). +*/ +#define hetPORT2 ((gioPORT_t *)0xFFF7B94CU) + +/** @def hetRAM2 +* @brief NHET1 RAM Pointer +* +* This pointer is used by the HET driver to access the NHET2 memory. +*/ +#define hetRAM2 ((hetRAMBASE_t *)0xFF440000U) + +#define NHET2RAMPARLOC (*(volatile uint32 *)0xFF442000U) +#define NHET2RAMLOC (*(volatile uint32 *)0xFF440000U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_htu.h b/include/arch/rm46l8lp/halcogen/reg_htu.h new file mode 100644 index 0000000..92e830c --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_htu.h @@ -0,0 +1,141 @@ +/** @file reg_htu.h +* @brief HTU Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the HTU driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_HTU_H__ +#define __REG_HTU_H__ + +#include "sys_common.h" + + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* htu Register Frame Definition */ +/** @struct htuBase +* @brief HTU Base Register Definition +* +* This structure is used to access the HTU module registers. +*/ +/** @typedef htuBASE_t +* @brief HTU Register Frame Type Definition +* +* This type is used to access the HTU Registers. +*/ +typedef volatile struct htuBase +{ + uint32 GC; /** 0x00 */ + uint32 CPENA; /** 0x04 */ + uint32 BUSY0; /** 0x08 */ + uint32 BUSY1; /** 0x0C */ + uint32 BUSY2; /** 0x10 */ + uint32 BUSY3; /** 0x14 */ + uint32 ACPE; /** 0x18 */ + uint32 rsvd1; /** 0x1C */ + uint32 RLBECTRL; /** 0x20 */ + uint32 BFINTS; /** 0x24 */ + uint32 BFINTC; /** 0x28 */ + uint32 INTMAP; /** 0x2C */ + uint32 rsvd2; /** 0x30 */ + uint32 INTOFF0; /** 0x34 */ + uint32 INTOFF1; /** 0x38 */ + uint32 BIM; /** 0x3C */ + uint32 RLOSTFL; /** 0x40 */ + uint32 BFINTFL; /** 0x44 */ + uint32 BERINTFL; /** 0x48 */ + uint32 MP1S; /** 0x4C */ + uint32 MP1E; /** 0x50 */ + uint32 DCTRL; /** 0x54 */ + uint32 WPR; /** 0x58 */ + uint32 WMR; /** 0x5C */ + uint32 ID; /** 0x60 */ + uint32 PCR; /** 0x64 */ + uint32 PAR; /** 0x68 */ + uint32 rsvd3; /** 0x6C */ + uint32 MPCS; /** 0x70 */ + uint32 MP0S; /** 0x74 */ + uint32 MP0E; /** 0x78 */ +} htuBASE_t; + +typedef volatile struct +{ + struct /* 0x00-0x7C */ + { + uint32 IFADDRA; + uint32 IFADDRB; + uint32 IHADDRCT; + uint32 ITCOUNT; + }DCP[8U]; + + struct /* 0x80-0xFC */ + { + uint32 res[32U]; + } RESERVED; + + struct /* 0x100-0x17C */ + { + uint32 CFADDRA; + uint32 CFADDRB; + uint32 CFCOUNT; + uint32 rsvd4; + }CDCP[8U]; + +} htuRAMBASE_t; + +#define htuREG1 ((htuBASE_t *)0xFFF7A400U) +#define htuREG2 ((htuBASE_t *)0xFFF7A500U) + +#define htuRAM1 ((htuRAMBASE_t *)0xFF4E0000U) +#define htuRAM2 ((htuRAMBASE_t *)0xFF4C0000U) + + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_i2c.h b/include/arch/rm46l8lp/halcogen/reg_i2c.h new file mode 100644 index 0000000..4e86e4d --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_i2c.h @@ -0,0 +1,147 @@ +/** @file reg_i2c.h +* @brief I2C Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the I2C driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_I2C_H__ +#define __REG_I2C_H__ + +#include "sys_common.h" +#include "reg_gio.h" + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* I2c Register Frame Definition */ +/** @struct i2cBase +* @brief I2C Base Register Definition +* +* This structure is used to access the I2C module registers. +*/ +/** @typedef i2cBASE_t +* @brief I2C Register Frame Type Definition +* +* This type is used to access the I2C Registers. +*/ +typedef volatile struct i2cBase +{ + + uint32 OAR; /**< 0x0000 I2C Own Address register */ + uint32 IMR; /**< 0x0004 I2C Interrupt Mask/Status register */ + uint32 STR; /**< 0x0008 I2C Interrupt Status register */ + uint32 CKL; /**< 0x000C I2C Clock Divider Low register */ + uint32 CKH; /**< 0x0010 I2C Clock Divider High register */ + uint32 CNT; /**< 0x0014 I2C Data Count register */ +#if ((__little_endian__ == 1) || (__LITTLE_ENDIAN__ == 1)) + uint8 DRR; /**< 0x0018: I2C Data Receive register, */ + uint8 rsvd1; /**< 0x0018: I2C Data Receive register, Reserved */ + uint8 rsvd2; /**< 0x0018: I2C Data Receive register, Reserved */ + uint8 rsvd3; /**< 0x0018: I2C Data Receive register, Reserved */ +#else + uint8 rsvd3; /**< 0x0018: I2C Data Receive register, Reserved */ + uint8 rsvd2; /**< 0x0018: I2C Data Receive register, Reserved */ + uint8 rsvd1; /**< 0x0018: I2C Data Receive register, Reserved */ + uint8 DRR; /**< 0x0018: I2C Data Receive register, */ +#endif + uint32 SAR; /**< 0x001C I2C Slave Address register */ +#if ((__little_endian__ == 1) || (__LITTLE_ENDIAN__ == 1)) + uint8 DXR; /**< 0x0020: I2C Data Transmit register, */ + uint8 rsvd4; /**< 0x0020: I2C Data Transmit register, Reserved */ + uint8 rsvd5; /**< 0x0020: I2C Data Transmit register, Reserved */ + uint8 rsvd6; /**< 0x0020: I2C Data Transmit register, Reserved */ +#else + uint8 rsvd6; /**< 0x0020: I2C Data Transmit register, Reserved */ + uint8 rsvd5; /**< 0x0020: I2C Data Transmit register, Reserved */ + uint8 rsvd4; /**< 0x0020: I2C Data Transmit register, Reserved */ + uint8 DXR; /**< 0x0020: I2C Data Transmit register, */ +#endif + uint32 MDR; /**< 0x0024 I2C Mode register */ + uint32 IVR; /**< 0x0028 I2C Interrupt Vector register */ + uint32 EMDR; /**< 0x002C I2C Extended Mode register */ + uint32 PSC; /**< 0x0030 I2C Prescaler register */ + uint32 PID11; /**< 0x0034 I2C Peripheral ID register 1 */ + uint32 PID12; /**< 0x0038 I2C Peripheral ID register 2 */ + uint32 DMACR; /**< 0x003C I2C DMA Control Register */ + uint32 rsvd7; /**< 0x0040 Reserved */ + uint32 rsvd8; /**< 0x0044 Reserved */ + uint32 PFNC; /**< 0x0048 Pin Function Register */ + uint32 DIR; /**< 0x004C Pin Direction Register */ + uint32 DIN; /**< 0x0050 Pin Data In Register */ + uint32 DOUT; /**< 0x0054 Pin Data Out Register */ + uint32 SET; /**< 0x0058 Pin Data Set Register */ + uint32 CLR; /**< 0x005C Pin Data Clr Register */ + uint32 PDR; /**< 0x0060 Pin Open Drain Output Enable Register */ + uint32 PDIS; /**< 0x0064 Pin Pullup/Pulldown Disable Register */ + uint32 PSEL; /**< 0x0068 Pin Pullup/Pulldown Selection Register */ + uint32 PSRS; /**< 0x006C Pin Slew Rate Select Register */ +} i2cBASE_t; + + +/** @def i2cREG1 +* @brief I2C Register Frame Pointer +* +* This pointer is used by the I2C driver to access the I2C module registers. +*/ +#define i2cREG1 ((i2cBASE_t *)0xFFF7D400U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +/** @def i2cPORT1 +* @brief I2C GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of I2C +* (use the GIO drivers to access the port pins). +*/ +#define i2cPORT1 ((gioPORT_t *)0xFFF7D44CU) + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_lin.h b/include/arch/rm46l8lp/halcogen/reg_lin.h new file mode 100644 index 0000000..c9c7730 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_lin.h @@ -0,0 +1,129 @@ +/** @file reg_lin.h +* @brief LIN Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the LIN driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_LIN_H__ +#define __REG_LIN_H__ + +#include "sys_common.h" +#include "reg_gio.h" + + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Lin Register Frame Definition */ +/** @struct linBase +* @brief LIN Base Register Definition +* +* This structure is used to access the LIN module registers. +*/ +/** @typedef linBASE_t +* @brief LIN Register Frame Type Definition +* +* This type is used to access the LIN Registers. +*/ + +typedef volatile struct linBase +{ + uint32 GCR0; /**< 0x0000: Global control register 0 */ + uint32 GCR1; /**< 0x0004: Global control register 1 */ + uint32 GCR2; /**< 0x0008: Global control register 2 */ + uint32 SETINT; /**< 0x000C: Set interrupt enable register */ + uint32 CLEARINT; /**< 0x0010: Clear interrupt enable register */ + uint32 SETINTLVL; /**< 0x0014: Set interrupt level register */ + uint32 CLEARINTLVL; /**< 0x0018: Set interrupt level register */ + uint32 FLR; /**< 0x001C: interrupt flag register */ + uint32 INTVECT0; /**< 0x0020: interrupt vector Offset 0 */ + uint32 INTVECT1; /**< 0x0024: interrupt vector Offset 1 */ + uint32 FORMAT; /**< 0x0028: Format Control Register */ + uint32 BRS; /**< 0x002C: Baud rate selection register */ + uint32 ED; /**< 0x0030: Emulation register */ + uint32 RD; /**< 0x0034: Receive data register */ + uint32 TD; /**< 0x0038: Transmit data register */ + uint32 PIO0; /**< 0x003C: Pin function register */ + uint32 PIO1; /**< 0x0040: Pin direction register */ + uint32 PIO2; /**< 0x0044: Pin data in register */ + uint32 PIO3; /**< 0x0048: Pin data out register */ + uint32 PIO4; /**< 0x004C: Pin data set register */ + uint32 PIO5; /**< 0x0050: Pin data clr register */ + uint32 PIO6; /**< 0x0054: Pin open drain output enable register */ + uint32 PIO7; /**< 0x0058: Pin pullup/pulldown disable register */ + uint32 PIO8; /**< 0x005C: Pin pullup/pulldown selection register */ + uint32 COMP; /**< 0x0060: Compare register */ + uint8 RDx[8U]; /**< 0x0064-0x0068: RX buffer register */ + uint32 MASK; /**< 0x006C: Mask register */ + uint32 ID; /**< 0x0070: Identification Register */ + uint8 TDx[8U]; /**< 0x0074-0x0078: TX buffer register */ + uint32 MBRSR; /**< 0x007C: Maximum baud rate selection register */ + uint32 rsvd1[4U]; /**< 0x0080 - 0x8C: Reserved */ + uint32 IODFTCTRL; /**< 0x0090: IODFT loopback register */ +} linBASE_t; + + +/** @def linREG +* @brief LIN Register Frame Pointer +* +* This pointer is used by the LIN driver to access the lin module registers. +*/ +#define linREG ((linBASE_t *)0xFFF7E400U) + + +/** @def linPORT +* @brief LIN GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of LIN +* (use the GIO drivers to access the port pins). +*/ +#define linPORT ((gioPORT_t *)0xFFF7E440U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_mibspi.h b/include/arch/rm46l8lp/halcogen/reg_mibspi.h new file mode 100644 index 0000000..a696f40 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_mibspi.h @@ -0,0 +1,257 @@ +/** @file reg_mibspi.h +* @brief MIBSPI Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the MIBSPI driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_MIBSPI_H__ +#define __REG_MIBSPI_H__ + +#include "sys_common.h" +#include "reg_gio.h" + + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Mibspi Register Frame Definition */ +/** @struct mibspiBase +* @brief MIBSPI Register Definition +* +* This structure is used to access the MIBSPI module registers. +*/ +/** @typedef mibspiBASE_t +* @brief MIBSPI Register Frame Type Definition +* +* This type is used to access the MIBSPI Registers. +*/ +typedef volatile struct mibspiBase +{ + uint32 GCR0; /**< 0x0000: Global Control 0 */ + uint32 GCR1; /**< 0x0004: Global Control 1 */ + uint32 INT0; /**< 0x0008: Interrupt Register */ + uint32 LVL; /**< 0x000C: Interrupt Level */ + uint32 FLG; /**< 0x0010: Interrupt flags */ + uint32 PC0; /**< 0x0014: Function Pin Enable */ + uint32 PC1; /**< 0x0018: Pin Direction */ + uint32 PC2; /**< 0x001C: Pin Input Latch */ + uint32 PC3; /**< 0x0020: Pin Output Latch */ + uint32 PC4; /**< 0x0024: Output Pin Set */ + uint32 PC5; /**< 0x0028: Output Pin Clr */ + uint32 PC6; /**< 0x002C: Open Drain Output Enable */ + uint32 PC7; /**< 0x0030: Pullup/Pulldown Disable */ + uint32 PC8; /**< 0x0034: Pullup/Pulldown Selection */ + uint32 DAT0; /**< 0x0038: Transmit Data */ + uint32 DAT1; /**< 0x003C: Transmit Data with Format and Chip Select */ + uint32 BUF; /**< 0x0040: Receive Buffer */ + uint32 EMU; /**< 0x0044: Emulation Receive Buffer */ + uint32 DELAY; /**< 0x0048: Delays */ + uint32 DEF; /**< 0x004C: Default Chip Select */ + uint32 FMT0; /**< 0x0050: Data Format 0 */ + uint32 FMT1; /**< 0x0054: Data Format 1 */ + uint32 FMT2; /**< 0x0058: Data Format 2 */ + uint32 FMT3; /**< 0x005C: Data Format 3 */ + uint32 INTVECT0; /**< 0x0060: Interrupt Vector 0 */ + uint32 INTVECT1; /**< 0x0064: Interrupt Vector 1 */ + uint32 SRSEL; /**< 0x0068: Slew Rate Select */ + uint32 PMCTRL; /**< 0x006C: Parallel Mode Control */ + uint32 MIBSPIE; /**< 0x0070: Multi-buffer Mode Enable */ + uint32 TGITENST; /**< 0x0074: TG Interrupt Enable Set */ + uint32 TGITENCR; /**< 0x0078: TG Interrupt Enable Clear */ + uint32 TGITLVST; /**< 0x007C: Transfer Group Interrupt Level Set */ + uint32 TGITLVCR; /**< 0x0080: Transfer Group Interrupt Level Clear */ + uint32 TGINTFLG; /**< 0x0084: Transfer Group Interrupt Flag */ + uint32 rsvd1[2U]; /**< 0x0088: Reserved */ + uint32 TICKCNT; /**< 0x0090: Tick Counter */ + uint32 LTGPEND; /**< 0x0090: Last TG End Pointer */ + uint32 TGCTRL[16U]; /**< 0x0098 - 0x00D4: Transfer Group Control */ + uint32 DMACTRL[8U]; /**< 0x00D8 - 0x00F4: DMA Control */ + uint32 DMACOUNT[8U]; /**< 0x00F8 - 0x0114: DMA Count */ + uint32 DMACNTLEN; /**< 0x0118 - 0x0114: DMA Control length */ + uint32 rsvd2; /**< 0x011C: Reserved */ + uint32 UERRCTRL; /**< 0x0120: Multi-buffer RAM Uncorrectable Parity Error Control */ + uint32 UERRSTAT; /**< 0x0124: Multi-buffer RAM Uncorrectable Parity Error Status */ + uint32 UERRADDRRX; /**< 0x0128: RXRAM Uncorrectable Parity Error Address */ + uint32 UERRADDRTX; /**< 0x012C: TXRAM Uncorrectable Parity Error Address */ + uint32 RXOVRN_BUF_ADDR; /**< 0x0130: RXRAM Overrun Buffer Address */ + uint32 IOLPKTSTCR; /**< 0x0134: IO loopback */ + uint32 EXT_PRESCALE1; /**< 0x0138: */ + uint32 EXT_PRESCALE2; /**< 0x013C: */ +} mibspiBASE_t; + + +/** @def mibspiREG1 +* @brief MIBSPI1 Register Frame Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi module registers. +*/ +#define mibspiREG1 ((mibspiBASE_t *)0xFFF7F400U) + + +/** @def mibspiPORT1 +* @brief MIBSPI1 GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of MIBSPI1 +* (use the GIO drivers to access the port pins). +*/ +#define mibspiPORT1 ((gioPORT_t *)0xFFF7F418U) + +/** @def mibspiREG3 +* @brief MIBSPI3 Register Frame Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi module registers. +*/ +#define mibspiREG3 ((mibspiBASE_t *)0xFFF7F800U) + + +/** @def mibspiPORT3 +* @brief MIBSPI3 GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of MIBSPI3 +* (use the GIO drivers to access the port pins). +*/ +#define mibspiPORT3 ((gioPORT_t *)0xFFF7F818U) + +/** @def mibspiREG5 +* @brief MIBSPI5 Register Frame Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi module registers. +*/ +#define mibspiREG5 ((mibspiBASE_t *)0xFFF7FC00U) + + +/** @def mibspiPORT5 +* @brief MIBSPI5 GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of MIBSPI5 +* (use the GIO drivers to access the port pins). +*/ +#define mibspiPORT5 ((gioPORT_t *)0xFFF7FC18U) + + +/** @struct mibspiRamBase +* @brief MIBSPI Buffer RAM Definition +* +* This structure is used to access the MIBSPI buffer memory. +*/ +/** @typedef mibspiRAM_t +* @brief MIBSPI RAM Type Definition +* +* This type is used to access the MIBSPI RAM. +*/ +typedef volatile struct mibspiRamBase +{ + struct + { +#if ((__little_endian__ == 1) || (__LITTLE_ENDIAN__ == 1)) + uint16 data; /**< tx buffer data */ + uint16 control; /**< tx buffer control */ +#else + uint16 control; /**< tx buffer control */ + uint16 data; /**< tx buffer data */ +#endif + } tx[128]; + struct + { +#if ((__little_endian__ == 1) || (__LITTLE_ENDIAN__ == 1)) + uint16 data; /**< rx buffer data */ + uint16 flags; /**< rx buffer flags */ +#else + uint16 flags; /**< rx buffer flags */ + uint16 data; /**< rx buffer data */ +#endif + } rx[128]; +} mibspiRAM_t; + + +/** @def mibspiRAM1 +* @brief MIBSPI1 Buffer RAM Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi buffer memory. +*/ +#define mibspiRAM1 ((mibspiRAM_t *)0xFF0E0000U) + +/** @def mibspiRAM3 +* @brief MIBSPI3 Buffer RAM Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi buffer memory. +*/ +#define mibspiRAM3 ((mibspiRAM_t *)0xFF0C0000U) + +/** @def mibspiRAM5 +* @brief MIBSPI5 Buffer RAM Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi buffer memory. +*/ +#define mibspiRAM5 ((mibspiRAM_t *)0xFF0A0000U) + +/** @def mibspiPARRAM1 +* @brief MIBSPI1 Buffer RAM PARITY Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi buffer memory. +*/ +#define mibspiPARRAM1 (*(volatile uint32 *)(0xFF0E0000U + 0x00000400U)) + +/** @def mibspiPARRAM3 +* @brief MIBSPI3 Buffer RAM PARITY Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi buffer memory. +*/ +#define mibspiPARRAM3 (*(volatile uint32 *)(0xFF0C0000U + 0x00000400U)) + + +/** @def mibspiPARRAM5 +* @brief MIBSPI5 Buffer RAM PARITY Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi buffer memory. +*/ +#define mibspiPARRAM5 (*(volatile uint32 *)(0xFF0A0000U + 0x00000400U)) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_pbist.h b/include/arch/rm46l8lp/halcogen/reg_pbist.h new file mode 100644 index 0000000..636e939 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_pbist.h @@ -0,0 +1,98 @@ +/** @file reg_pbist.h +* @brief PBIST Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* . +* which are relevant for the System driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_PBIST_H__ +#define __REG_PBIST_H__ + +#include "sys_common.h" + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* PBIST Register Frame Definition */ +/** @struct pbistBase +* @brief PBIST Base Register Definition +* +* This structure is used to access the PBIST module registers. +*/ +/** @typedef pbistBASE_t +* @brief PBIST Register Frame Type Definition +* +* This type is used to access the PBIST Registers. +*/ +typedef volatile struct pbistBase +{ + uint32 RAMT; /* 0x0160: RAM Configuration Register */ + uint32 DLR; /* 0x0164: Datalogger Register */ + uint32 rsvd1[6U]; /* 0x0168 */ + uint32 PACT; /* 0x0180: PBIST Activate Register */ + uint32 PBISTID; /* 0x0184: PBIST ID Register */ + uint32 OVER; /* 0x0188: Override Register */ + uint32 rsvd2; /* 0x018C */ + uint32 FSRF0; /* 0x0190: Fail Status Fail Register 0 */ + uint32 rsvd5; /* 0x0194 */ + uint32 FSRC0; /* 0x0198: Fail Status Count Register 0 */ + uint32 FSRC1; /* 0x019C: Fail Status Count Register 1 */ + uint32 FSRA0; /* 0x01A0: Fail Status Address 0 Register */ + uint32 FSRA1; /* 0x01A4: Fail Status Address 1 Register */ + uint32 FSRDL0; /* 0x01A8: Fail Status Data Register 0 */ + uint32 rsvd3; /* 0x01AC */ + uint32 FSRDL1; /* 0x01B0: Fail Status Data Register 1 */ + uint32 rsvd4[3U]; /* 0x01B4 */ + uint32 ROM; /* 0x01C0: ROM Mask Register */ + uint32 ALGO; /* 0x01C4: Algorithm Mask Register */ + uint32 RINFOL; /* 0x01C8: RAM Info Mask Lower Register */ + uint32 RINFOU; /* 0x01CC: RAM Info Mask Upper Register */ +} pbistBASE_t; + +#define pbistREG ((pbistBASE_t *)0xFFFFE560U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_pcr.h b/include/arch/rm46l8lp/halcogen/reg_pcr.h new file mode 100644 index 0000000..f3d6f6b --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_pcr.h @@ -0,0 +1,113 @@ +/** @file reg_pcr.h +* @brief PCR Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* . +* which are relevant for the System driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_PCR_H__ +#define __REG_PCR_H__ + +#include "sys_common.h" + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Pcr Register Frame Definition */ +/** @struct pcrBase +* @brief Pcr Register Frame Definition +* +* This type is used to access the Pcr Registers. +*/ +/** @typedef pcrBASE_t +* @brief PCR Register Frame Type Definition +* +* This type is used to access the PCR Registers. +*/ +typedef volatile struct pcrBase +{ + uint32 PMPROTSET0; /* 0x0000 */ + uint32 PMPROTSET1; /* 0x0004 */ + uint32 rsvd1[2U]; /* 0x0008 */ + uint32 PMPROTCLR0; /* 0x0010 */ + uint32 PMPROTCLR1; /* 0x0014 */ + uint32 rsvd2[2U]; /* 0x0018 */ + uint32 PPROTSET0; /* 0x0020 */ + uint32 PPROTSET1; /* 0x0024 */ + uint32 PPROTSET2; /* 0x0028 */ + uint32 PPROTSET3; /* 0x002C */ + uint32 rsvd3[4U]; /* 0x0030 */ + uint32 PPROTCLR0; /* 0x0040 */ + uint32 PPROTCLR1; /* 0x0044 */ + uint32 PPROTCLR2; /* 0x0048 */ + uint32 PPROTCLR3; /* 0x004C */ + uint32 rsvd4[4U]; /* 0x0050 */ + uint32 PCSPWRDWNSET0; /* 0x0060 */ + uint32 PCSPWRDWNSET1; /* 0x0064 */ + uint32 rsvd5[2U]; /* 0x0068 */ + uint32 PCSPWRDWNCLR0; /* 0x0070 */ + uint32 PCSPWRDWNCLR1; /* 0x0074 */ + uint32 rsvd6[2U]; /* 0x0078 */ + uint32 PSPWRDWNSET0; /* 0x0080 */ + uint32 PSPWRDWNSET1; /* 0x0084 */ + uint32 PSPWRDWNSET2; /* 0x0088 */ + uint32 PSPWRDWNSET3; /* 0x008C */ + uint32 rsvd7[4U]; /* 0x0090 */ + uint32 PSPWRDWNCLR0; /* 0x00A0 */ + uint32 PSPWRDWNCLR1; /* 0x00A4 */ + uint32 PSPWRDWNCLR2; /* 0x00A8 */ + uint32 PSPWRDWNCLR3; /* 0x00AC */ +} pcrBASE_t; + +/** @def pcrREG +* @brief Pcr Register Frame Pointer +* +* This pointer is used by the system driver to access the Pcr registers. +*/ +#define pcrREG ((pcrBASE_t *)0xFFFFE000U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_pinmux.h b/include/arch/rm46l8lp/halcogen/reg_pinmux.h new file mode 100644 index 0000000..c70cf31 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_pinmux.h @@ -0,0 +1,180 @@ +/** @file reg_pinmux.h +* @brief PINMUX Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the PINMUX driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_PINMUX_H__ +#define __REG_PINMUX_H__ + +#include "sys_common.h" + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* IOMM Revision and Boot Register */ +#define REVISION_REG (*(volatile uint32 *)0xFFFFEA00U) +#define ENDIAN_REG (*(volatile uint32 *)0xFFFFEA20U) + +/* IOMM Error and Fault Registers */ +/** @struct iommErrFault +* @brief IOMM Error and Fault Register Definition +* +* This structure is used to access the IOMM Error and Fault registers. +*/ +typedef volatile struct iommErrFault +{ + uint32 ERR_RAW_STATUS_REG; /* Error Raw Status / Set Register */ + uint32 ERR_ENABLED_STATUS_REG; /* Error Enabled Status / Clear Register */ + uint32 ERR_ENABLE_REG; /* Error Signaling Enable Register */ + uint32 ERR_ENABLE_CLR_REG; /* Error Signaling Enable Clear Register */ + uint32 rsvd; /* Reserved */ + uint32 FAULT_ADDRESS_REG; /* Fault Address Register */ + uint32 FAULT_STATUS_REG; /* Fault Status Register */ + uint32 FAULT_CLEAR_REG; /* Fault Clear Register */ +} iommErrFault_t; + +/* Pinmux Register Frame Definition */ +/** @struct pinMuxKicker +* @brief Pin Muxing Kicker Register Definition +* +* This structure is used to access the Pin Muxing Kicker registers. +*/ +typedef volatile struct pinMuxKicker +{ + uint32 KICKER0; /* kicker 0 register */ + uint32 KICKER1; /* kicker 1 register */ +} pinMuxKICKER_t; + +/** @struct pinMuxBase +* @brief PINMUX Register Definition +* +* This structure is used to access the PINMUX module egisters. +*/ +/** @typedef pinMuxBASE_t +* @brief PINMUX Register Frame Type Definition +* +* This type is used to access the PINMUX Registers. +*/ +typedef volatile struct pinMuxBase +{ + uint32 PINMMR0; /**< 0xEB10 Pin Mux 0 register*/ + uint32 PINMMR1; /**< 0xEB14 Pin Mux 1 register*/ + uint32 PINMMR2; /**< 0xEB18 Pin Mux 2 register*/ + uint32 PINMMR3; /**< 0xEB1C Pin Mux 3 register*/ + uint32 PINMMR4; /**< 0xEB20 Pin Mux 4 register*/ + uint32 PINMMR5; /**< 0xEB24 Pin Mux 5 register*/ + uint32 PINMMR6; /**< 0xEB28 Pin Mux 6 register*/ + uint32 PINMMR7; /**< 0xEB2C Pin Mux 7 register*/ + uint32 PINMMR8; /**< 0xEB30 Pin Mux 8 register*/ + uint32 PINMMR9; /**< 0xEB34 Pin Mux 9 register*/ + uint32 PINMMR10; /**< 0xEB38 Pin Mux 10 register*/ + uint32 PINMMR11; /**< 0xEB3C Pin Mux 11 register*/ + uint32 PINMMR12; /**< 0xEB40 Pin Mux 12 register*/ + uint32 PINMMR13; /**< 0xEB44 Pin Mux 13 register*/ + uint32 PINMMR14; /**< 0xEB48 Pin Mux 14 register*/ + uint32 PINMMR15; /**< 0xEB4C Pin Mux 15 register*/ + uint32 PINMMR16; /**< 0xEB50 Pin Mux 16 register*/ + uint32 PINMMR17; /**< 0xEB54 Pin Mux 17 register*/ + uint32 PINMMR18; /**< 0xEB58 Pin Mux 18 register*/ + uint32 PINMMR19; /**< 0xEB5C Pin Mux 19 register*/ + uint32 PINMMR20; /**< 0xEB60 Pin Mux 20 register*/ + uint32 PINMMR21; /**< 0xEB64 Pin Mux 21 register*/ + uint32 PINMMR22; /**< 0xEB68 Pin Mux 22 register*/ + uint32 PINMMR23; /**< 0xEB6C Pin Mux 23 register*/ + uint32 PINMMR24; /**< 0xEB70 Pin Mux 24 register*/ + uint32 PINMMR25; /**< 0xEB74 Pin Mux 25 register*/ + uint32 PINMMR26; /**< 0xEB78 Pin Mux 26 register*/ + uint32 PINMMR27; /**< 0xEB7C Pin Mux 27 register*/ + uint32 PINMMR28; /**< 0xEB80 Pin Mux 28 register*/ + uint32 PINMMR29; /**< 0xEB84 Pin Mux 29 register*/ + uint32 PINMMR30; /**< 0xEB88 Pin Mux 30 register*/ + uint32 PINMMR31; /**< 0xEB8C Pin Mux 31 register*/ + uint32 PINMMR32; /**< 0xEB90 Pin Mux 32 register*/ + uint32 PINMMR33; /**< 0xEB94 Pin Mux 33 register*/ + uint32 PINMMR34; /**< 0xEB98 Pin Mux 34 register*/ + uint32 PINMMR35; /**< 0xEB9C Pin Mux 35 register*/ + uint32 PINMMR36; /**< 0xEBA0 Pin Mux 36 register*/ + uint32 PINMMR37; /**< 0xEBA4 Pin Mux 37 register*/ + uint32 PINMMR38; /**< 0xEBA8 Pin Mux 38 register*/ + uint32 PINMMR39; /**< 0xEBAC Pin Mux 39 register*/ + uint32 PINMMR40; /**< 0xEBB0 Pin Mux 40 register*/ + uint32 PINMMR41; /**< 0xEBB4 Pin Mux 41 register*/ + uint32 PINMMR42; /**< 0xEBB8 Pin Mux 42 register*/ + uint32 PINMMR43; /**< 0xEBBC Pin Mux 43 register*/ + uint32 PINMMR44; /**< 0xEBC0 Pin Mux 44 register*/ + uint32 PINMMR45; /**< 0xEBC4 Pin Mux 45 register*/ + uint32 PINMMR46; /**< 0xEBC8 Pin Mux 46 register*/ + uint32 PINMMR47; /**< 0xEBCC Pin Mux 47 register*/ +}pinMuxBASE_t; + + +/** @def iommErrFaultReg +* @brief IOMM Error Fault Register Frame Pointer +* +* This pointer is used to control IOMM Error and Fault across the device. +*/ +#define iommErrFaultReg ((iommErrFault_t *) 0xFFFFEAE0U) + +/** @def kickerReg +* @brief Pin Muxing Kicker Register Frame Pointer +* +* This pointer is used to enable and disable muxing accross the device. +*/ +#define kickerReg ((pinMuxKICKER_t *) 0xFFFFEA38U) + +/** @def pinMuxReg +* @brief Pin Muxing Control Register Frame Pointer +* +* This pointer is used to set the muxing registers accross the device. +*/ +#define pinMuxReg ((pinMuxBASE_t *) 0xFFFFEB10U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_pmm.h b/include/arch/rm46l8lp/halcogen/reg_pmm.h new file mode 100644 index 0000000..37e6ac3 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_pmm.h @@ -0,0 +1,111 @@ +/** @file reg_pmm.h +* @brief PMM Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* . +* which are relevant for the PMM driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_PMM_H__ +#define __REG_PMM_H__ + +#include "sys_common.h" + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Pmm Register Frame Definition */ +/** @struct pmmBase +* @brief Pmm Register Frame Definition +* +* This type is used to access the Pmm Registers. +*/ +/** @typedef pmmBase_t +* @brief Pmm Register Frame Type Definition +* +* This type is used to access the Pmm Registers. +*/ +typedef volatile struct pmmBase +{ + uint32 LOGICPDPWRCTRL0; /**< 0x0000: Logic Power Domain Control Register 0 */ + uint32 rsvd1[3U]; /**< 0x0004: Reserved*/ + uint32 MEMPDPWRCTRL0; /**< 0x0010: Memory Power Domain Control Register 0 */ + uint32 rsvd2[3U]; /**< 0x0014: Reserved*/ + uint32 PDCLKDISREG; /**< 0x0020: Power Domain Clock Disable Register */ + uint32 PDCLKDISSETREG; /**< 0x0024: Power Domain Clock Disable Set Register */ + uint32 PDCLKDISCLRREG; /**< 0x0028: Power Domain Clock Disable Clear Register */ + uint32 rsvd3[5U]; /**< 0x002C: Reserved */ + uint32 LOGICPDPWRSTAT[4U]; /**< 0x0040, 0x0044, 0x0048, 0x004C: Logic Power Domain Power Status Register + - 0: PD2 + - 1: PD3 + - 2: PD4 + - 3: PD5 */ + uint32 rsvd4[12U]; /**< 0x0050: Reserved*/ + uint32 MEMPDPWRSTAT[3U]; /**< 0x0080, 0x0084, 0x0088: Memory Power Domain Power Status Register + - 0: RAM_PD1 + - 1: RAM_PD2 + - 2: RAM_PD3 */ + uint32 rsvd5[5U]; /**< 0x008C: Reserved */ + uint32 GLOBALCTRL1; /**< 0x00A0: Global Control Register 1 */ + uint32 rsvd6; /**< 0x00A4: Reserved */ + uint32 GLOBALSTAT; /**< 0x00A8: Global Status Register */ + uint32 PRCKEYREG; /**< 0x00AC: PSCON Diagnostic Compare Key Register */ + uint32 LPDDCSTAT1; /**< 0x00B0: LogicPD PSCON Diagnostic Compare Status Register 1 */ + uint32 LPDDCSTAT2; /**< 0x00B4: LogicPD PSCON Diagnostic Compare Status Register 2 */ + uint32 MPDDCSTAT1; /**< 0x00B8: Memory PD PSCON Diagnostic Compare Status Register 1 */ + uint32 MPDDCSTAT2; /**< 0x00BC: Memory PD PSCON Diagnostic Compare Status Register 2 */ + uint32 ISODIAGSTAT; /**< 0x00C0: Isolation Diagnostic Status Register */ +}pmmBase_t; + + +/** @def pmmREG +* @brief Pmm Register Frame Pointer +* +* This pointer is used by the Pmm driver to access the Pmm registers. +*/ +#define pmmREG ((pmmBase_t *)0xFFFF0000U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_pom.h b/include/arch/rm46l8lp/halcogen/reg_pom.h new file mode 100644 index 0000000..6ee4574 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_pom.h @@ -0,0 +1,127 @@ +/** @file reg_pom.h +* @brief POM Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the POM driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_POM_H__ +#define __REG_POM_H__ + +#include "sys_common.h" + + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Pom Register Frame Definition */ +/** @struct POMBase +* @brief POM Register Frame Definition +* +* This structure is used to access the POM module registers(POM Register Map). +*/ +typedef struct +{ + uint32 POMGLBCTRL; /* 0x00 */ + uint32 POMREV; /* 0x04 */ + uint32 POMCLKCTRL; /* 0x08 */ + uint32 POMFLG; /* 0x0C */ + struct + { + uint32 rsdv1; + }RESERVED_REG[124U]; + struct /* 0x200 ... */ + { + uint32 POMPROGSTART; + uint32 POMOVLSTART; + uint32 POMREGSIZE; + uint32 rsdv2; + }POMRGNCONF_ST[32U]; +}pomBASE_t; + + +/** @struct POM_CORESIGHT_ST +* @brief POM_CORESIGHT_ST Register Definition +* +* This structure is used to access the POM module registers(POM CoreSight Registers ). +*/ +typedef struct +{ + uint32 POMITCTRL; /* 0xF00 */ + struct /* 0xF04 to 0xF9C */ + { + uint32 Reserved_Reg; + }Reserved1_ST[39U]; + uint32 POMCLAIMSET; /* 0xFA0 */ + uint32 POMCLAIMCLR; /* 0xFA4 */ + uint32 rsvd1[2U]; /* 0xFA8 */ + uint32 POMLOCKACCESS; /* 0xFB0 */ + uint32 POMLOCKSTATUS; /* 0xFB4 */ + uint32 POMAUTHSTATUS; /* 0xFB8 */ + uint32 rsvd2[3U]; /* 0xFBC */ + uint32 POMDEVID; /* 0xFC8 */ + uint32 POMDEVTYPE; /* 0xFCC */ + uint32 POMPERIPHERALID4; /* 0xFD0 */ + uint32 POMPERIPHERALID5; /* 0xFD4 */ + uint32 POMPERIPHERALID6; /* 0xFD8 */ + uint32 POMPERIPHERALID7; /* 0xFDC */ + uint32 POMPERIPHERALID0; /* 0xFE0 */ + uint32 POMPERIPHERALID1; /* 0xFE4 */ + uint32 POMPERIPHERALID2; /* 0xFE8 */ + uint32 POMPERIPHERALID3; /* 0xFEC */ + uint32 POMCOMPONENTID0; /* 0xFF0 */ + uint32 POMCOMPONENTID1; /* 0xFF4 */ + uint32 POMCOMPONENTID2; /* 0xFF8 */ + uint32 POMCOMPONENTID3; /* 0xFFC */ +}POM_CORESIGHT_ST; + + +#define pomREG ((pomBASE_t *)0xFFA04000U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_rti.h b/include/arch/rm46l8lp/halcogen/reg_rti.h new file mode 100644 index 0000000..633c692 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_rti.h @@ -0,0 +1,129 @@ +/** @file reg_rti.h +* @brief RTI Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the RTI driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_RTI_H__ +#define __REG_RTI_H__ + +#include "sys_common.h" + + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Rti Register Frame Definition */ +/** @struct rtiBase +* @brief RTI Register Frame Definition +* +* This type is used to access the RTI Registers. +*/ +/** @typedef rtiBASE_t +* @brief RTI Register Frame Type Definition +* +* This type is used to access the RTI Registers. +*/ +typedef volatile struct rtiBase +{ + uint32 GCTRL; /**< 0x0000: Global Control Register */ + uint32 TBCTRL; /**< 0x0004: Timebase Control Register */ + uint32 CAPCTRL; /**< 0x0008: Capture Control Register */ + uint32 COMPCTRL; /**< 0x000C: Compare Control Register */ + struct + { + uint32 FRCx; /**< 0x0010,0x0030: Free Running Counter x Register */ + uint32 UCx; /**< 0x0014,0x0034: Up Counter x Register */ + uint32 CPUCx; /**< 0x0018,0x0038: Compare Up Counter x Register */ + uint32 rsvd1; /**< 0x001C,0x003C: Reserved */ + uint32 CAFRCx; /**< 0x0020,0x0040: Capture Free Running Counter x Register */ + uint32 CAUCx; /**< 0x0024,0x0044: Capture Up Counter x Register */ + uint32 rsvd2[2U]; /**< 0x0028,0x0048: Reserved */ + } CNT[2U]; /**< Counter x selection: + - 0: Counter 0 + - 1: Counter 1 */ + struct + { + uint32 COMPx; /**< 0x0050,0x0058,0x0060,0x0068: Compare x Register */ + uint32 UDCPx; /**< 0x0054,0x005C,0x0064,0x006C: Update Compare x Register */ + } CMP[4U]; /**< Compare x selection: + - 0: Compare 0 + - 1: Compare 1 + - 2: Compare 2 + - 3: Compare 3 */ + uint32 TBLCOMP; /**< 0x0070: External Clock Timebase Low Compare Register */ + uint32 TBHCOMP; /**< 0x0074: External Clock Timebase High Compare Register */ + uint32 rsvd3[2U]; /**< 0x0078: Reserved */ + uint32 SETINTENA; /**< 0x0080: Set/Status Interrupt Register */ + uint32 CLEARINTENA; /**< 0x0084: Clear/Status Interrupt Register */ + uint32 INTFLAG; /**< 0x0088: Interrupt Flag Register */ + uint32 rsvd4; /**< 0x008C: Reserved */ + uint32 DWDCTRL; /**< 0x0090: Digital Watchdog Control Register */ + uint32 DWDPRLD; /**< 0x0094: Digital Watchdog Preload Register */ + uint32 WDSTATUS; /**< 0x0098: Watchdog Status Register */ + uint32 WDKEY; /**< 0x009C: Watchdog Key Register */ + uint32 DWDCNTR; /**< 0x00A0: Digital Watchdog Down Counter */ + uint32 WWDRXNCTRL; /**< 0x00A4: Digital Windowed Watchdog Reaction Control */ + uint32 WWDSIZECTRL; /**< 0x00A8: Digital Windowed Watchdog Window Size Control */ + uint32 INTCLRENABLE; /**< 0x00AC: RTI Compare Interrupt Clear Enable Register */ + uint32 COMP0CLR; /**< 0x00B0: RTI Compare 0 Clear Register */ + uint32 COMP1CLR; /**< 0x00B4: RTI Compare 1 Clear Register */ + uint32 COMP2CLR; /**< 0x00B8: RTI Compare 2 Clear Register */ + uint32 COMP3CLR; /**< 0x00BC: RTI Compare 3 Clear Register */ +} rtiBASE_t; + +/** @def rtiREG1 +* @brief RTI1 Register Frame Pointer +* +* This pointer is used by the RTI driver to access the RTI1 registers. +*/ +#define rtiREG1 ((rtiBASE_t *)0xFFFFFC00U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_sci.h b/include/arch/rm46l8lp/halcogen/reg_sci.h new file mode 100644 index 0000000..c0b7f88 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_sci.h @@ -0,0 +1,139 @@ +/** @file reg_sci.h +* @brief SCI Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the SCI driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_SCI_H__ +#define __REG_SCI_H__ + +#include "sys_common.h" +#include "reg_gio.h" + + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Sci Register Frame Definition */ +/** @struct sciBase +* @brief SCI Base Register Definition +* +* This structure is used to access the SCI module registers. +*/ +/** @typedef sciBASE_t +* @brief SCI Register Frame Type Definition +* +* This type is used to access the SCI Registers. +*/ +typedef volatile struct sciBase +{ + uint32 GCR0; /**< 0x0000 Global Control Register 0 */ + uint32 GCR1; /**< 0x0004 Global Control Register 1 */ + uint32 GCR2; /**< 0x0008 Global Control Register 2. Note: Applicable only to LIN – SCI Compatibility Mode,Reserved for standalone SCI*/ + uint32 SETINT; /**< 0x000C Set Interrupt Enable Register */ + uint32 CLEARINT; /**< 0x0010 Clear Interrupt Enable Register */ + uint32 SETINTLVL; /**< 0x0014 Set Interrupt Level Register */ + uint32 CLEARINTLVL; /**< 0x0018 Set Interrupt Level Register */ + uint32 FLR; /**< 0x001C Interrupt Flag Register */ + uint32 INTVECT0; /**< 0x0020 Interrupt Vector Offset 0 */ + uint32 INTVECT1; /**< 0x0024 Interrupt Vector Offset 1 */ + uint32 FORMAT; /**< 0x0028 Format Control Register */ + uint32 BRS; /**< 0x002C Baud Rate Selection Register */ + uint32 ED; /**< 0x0030 Emulation Register */ + uint32 RD; /**< 0x0034 Receive Data Buffer */ + uint32 TD; /**< 0x0038 Transmit Data Buffer */ + uint32 PIO0; /**< 0x003C Pin Function Register */ + uint32 PIO1; /**< 0x0040 Pin Direction Register */ + uint32 PIO2; /**< 0x0044 Pin Data In Register */ + uint32 PIO3; /**< 0x0048 Pin Data Out Register */ + uint32 PIO4; /**< 0x004C Pin Data Set Register */ + uint32 PIO5; /**< 0x0050 Pin Data Clr Register */ + uint32 PIO6; /**< 0x0054: Pin Open Drain Output Enable Register */ + uint32 PIO7; /**< 0x0058: Pin Pullup/Pulldown Disable Register */ + uint32 PIO8; /**< 0x005C: Pin Pullup/Pulldown Selection Register */ + uint32 rsdv2[12U]; /**< 0x0060: Reserved */ + uint32 IODFTCTRL; /**< 0x0090: I/O Error Enable Register */ +} sciBASE_t; + + +/** @def sciREG +* @brief Register Frame Pointer +* +* This pointer is used by the SCI driver to access the sci module registers. +*/ +#define sciREG ((sciBASE_t *)0xFFF7E500U) + + +/** @def sciPORT +* @brief SCI GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of SCI +* (use the GIO drivers to access the port pins). +*/ +#define sciPORT ((gioPORT_t *)0xFFF7E540U) + + +/** @def scilinREG +* @brief SCILIN (LIN - Compatibility Mode) Register Frame Pointer +* +* This pointer is used by the SCI driver to access the sci module registers. +*/ +#define scilinREG ((sciBASE_t *)0xFFF7E400U) + + +/** @def scilinPORT +* @brief SCILIN (LIN - Compatibility Mode) Register Frame Pointer +* +* Pointer used by the GIO driver to access I/O PORT of LIN +* (use the GIO drivers to access the port pins). +*/ +#define scilinPORT ((gioPORT_t *)0xFFF7E440U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_spi.h b/include/arch/rm46l8lp/halcogen/reg_spi.h new file mode 100644 index 0000000..50bd5a8 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_spi.h @@ -0,0 +1,187 @@ +/** @file reg_spi.h +* @brief SPI Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the SPI driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_SPI_H__ +#define __REG_SPI_H__ + +#include "sys_common.h" +#include "reg_gio.h" + + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Spi Register Frame Definition */ +/** @struct spiBase +* @brief SPI Register Definition +* +* This structure is used to access the SPI module registers. +*/ +/** @typedef spiBASE_t +* @brief SPI Register Frame Type Definition +* +* This type is used to access the SPI Registers. +*/ +typedef volatile struct spiBase +{ + uint32 GCR0; /**< 0x0000: Global Control 0 */ + uint32 GCR1; /**< 0x0004: Global Control 1 */ + uint32 INT0; /**< 0x0008: Interrupt Register */ + uint32 LVL; /**< 0x000C: Interrupt Level */ + uint32 FLG; /**< 0x0010: Interrupt flags */ + uint32 PC0; /**< 0x0014: Function Pin Enable */ + uint32 PC1; /**< 0x0018: Pin Direction */ + uint32 PC2; /**< 0x001C: Pin Input Latch */ + uint32 PC3; /**< 0x0020: Pin Output Latch */ + uint32 PC4; /**< 0x0024: Output Pin Set */ + uint32 PC5; /**< 0x0028: Output Pin Clr */ + uint32 PC6; /**< 0x002C: Open Drain Output Enable */ + uint32 PC7; /**< 0x0030: Pullup/Pulldown Disable */ + uint32 PC8; /**< 0x0034: Pullup/Pulldown Selection */ + uint32 DAT0; /**< 0x0038: Transmit Data */ + uint32 DAT1; /**< 0x003C: Transmit Data with Format and Chip Select */ + uint32 BUF; /**< 0x0040: Receive Buffer */ + uint32 EMU; /**< 0x0044: Emulation Receive Buffer */ + uint32 DELAY; /**< 0x0048: Delays */ + uint32 DEF; /**< 0x004C: Default Chip Select */ + uint32 FMT0; /**< 0x0050: Data Format 0 */ + uint32 FMT1; /**< 0x0054: Data Format 1 */ + uint32 FMT2; /**< 0x0058: Data Format 2 */ + uint32 FMT3; /**< 0x005C: Data Format 3 */ + uint32 INTVECT0; /**< 0x0060: Interrupt Vector 0 */ + uint32 INTVECT1; /**< 0x0064: Interrupt Vector 1 */ + uint32 RESERVED[51U]; /**< 0x0068 to 0x0130: Reserved */ + uint32 IOLPKTSTCR; /**< 0x0134: IO loopback */ +} spiBASE_t; + +/** @def spiREG1 +* @brief SPI1 (MIBSPI - Compatibility Mode) Register Frame Pointer +* +* This pointer is used by the SPI driver to access the spi module registers. +*/ +#define spiREG1 ((spiBASE_t *)0xFFF7F400U) + + +/** @def spiPORT1 +* @brief SPI1 (MIBSPI - Compatibility Mode) GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of SPI1 +* (use the GIO drivers to access the port pins). +*/ +#define spiPORT1 ((gioPORT_t *)0xFFF7F418U) + +/** @def spiREG2 +* @brief SPI2 Register Frame Pointer +* +* This pointer is used by the SPI driver to access the spi module registers. +*/ +#define spiREG2 ((spiBASE_t *)0xFFF7F600U) + + +/** @def spiPORT2 +* @brief SPI2 GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of SPI2 +* (use the GIO drivers to access the port pins). +*/ +#define spiPORT2 ((gioPORT_t *)0xFFF7F618U) + +/** @def spiREG3 +* @brief SPI3 (MIBSPI - Compatibility Mode) Register Frame Pointer +* +* This pointer is used by the SPI driver to access the spi module registers. +*/ +#define spiREG3 ((spiBASE_t *)0xFFF7F800U) + + +/** @def spiPORT3 +* @brief SPI3 (MIBSPI - Compatibility Mode) GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of SPI3 +* (use the GIO drivers to access the port pins). +*/ +#define spiPORT3 ((gioPORT_t *)0xFFF7F818U) + +/** @def spiREG4 +* @brief SPI4 Register Frame Pointer +* +* This pointer is used by the SPI driver to access the spi module registers. +*/ +#define spiREG4 ((spiBASE_t *)0xFFF7FA00U) + + +/** @def spiPORT4 +* @brief SPI4 GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of SPI4 +* (use the GIO drivers to access the port pins). +*/ +#define spiPORT4 ((gioPORT_t *)0xFFF7FA18U) + +/** @def spiREG5 +* @brief SPI5 (MIBSPI - Compatibility Mode) Register Frame Pointer +* +* This pointer is used by the SPI driver to access the spi module registers. +*/ +#define spiREG5 ((spiBASE_t *)0xFFF7FC00U) + + +/** @def spiPORT5 +* @brief SPI5 (MIBSPI - Compatibility Mode) GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of SPI5 +* (use the GIO drivers to access the port pins). +*/ +#define spiPORT5 ((gioPORT_t *)0xFFF7FC18U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_stc.h b/include/arch/rm46l8lp/halcogen/reg_stc.h new file mode 100644 index 0000000..ab56f8d --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_stc.h @@ -0,0 +1,93 @@ +/** @file reg_stc.h +* @brief STC Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* . +* which are relevant for the System driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_STC_H__ +#define __REG_STC_H__ + +#include "sys_common.h" + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Stc Register Frame Definition */ +/** @struct stcBase +* @brief STC Base Register Definition +* +* This structure is used to access the STC module registers. +*/ +/** @typedef stcBASE_t +* @brief STC Register Frame Type Definition +* +* This type is used to access the STC Registers. +*/ +typedef volatile struct stcBase +{ + uint32 STCGCR0; /**< 0x0000: STC Control Register 0 */ + uint32 STCGCR1; /**< 0x0004: STC Control Register 1 */ + uint32 STCTPR; /**< 0x0008: STC Self-Test Run Timeout Counter Preload Register */ + uint32 STCCADDR; /**< 0x000C: STC Self-Test Current ROM Address Register */ + uint32 STCCICR; /**< 0x0010: STC Self-Test Current Interval Count Register */ + uint32 STCGSTAT; /**< 0x0014: STC Self-Test Global Status Register */ + uint32 STCFSTAT; /**< 0x0018: STC Self-Test Fail Status Register */ + uint32 CPU1_CURMISR3; /**< 0x001C: STC CPU1 Current MISR Register */ + uint32 CPU1_CURMISR2; /**< 0x0020: STC CPU1 Current MISR Register */ + uint32 CPU1_CURMISR1; /**< 0x0024: STC CPU1 Current MISR Register */ + uint32 CPU1_CURMISR0; /**< 0x0028: STC CPU1 Current MISR Register */ + uint32 CPU2_CURMISR3; /**< 0x002C: STC CPU1 Current MISR Register */ + uint32 CPU2_CURMISR2; /**< 0x0030: STC CPU1 Current MISR Register */ + uint32 CPU2_CURMISR1; /**< 0x0034: STC CPU1 Current MISR Register */ + uint32 CPU2_CURMISR0; /**< 0x0038: STC CPU1 Current MISR Register */ + uint32 STCSCSCR; /**< 0x003C: STC Signature Compare Self-Check Register */ +} stcBASE_t; + +#define stcREG ((stcBASE_t *)0xFFFFE600U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_system.h b/include/arch/rm46l8lp/halcogen/reg_system.h new file mode 100644 index 0000000..772d0ce --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_system.h @@ -0,0 +1,191 @@ +/** @file reg_system.h +* @brief System Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* . +* which are relevant for the System driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_SYSTEM_H__ +#define __REG_SYSTEM_H__ + +#include "sys_common.h" +#include "reg_gio.h" + + +/* System Register Frame 1 Definition */ +/** @struct systemBase1 +* @brief System Register Frame 1 Definition +* +* This type is used to access the System 1 Registers. +*/ +/** @typedef systemBASE1_t +* @brief System Register Frame 1 Type Definition +* +* This type is used to access the System 1 Registers. +*/ +typedef volatile struct systemBase1 +{ + uint32 SYSPC1; /* 0x0000 */ + uint32 SYSPC2; /* 0x0004 */ + uint32 SYSPC3; /* 0x0008 */ + uint32 SYSPC4; /* 0x000C */ + uint32 SYSPC5; /* 0x0010 */ + uint32 SYSPC6; /* 0x0014 */ + uint32 SYSPC7; /* 0x0018 */ + uint32 SYSPC8; /* 0x001C */ + uint32 SYSPC9; /* 0x0020 */ + uint32 SSWPLL1; /* 0x0024 */ + uint32 SSWPLL2; /* 0x0028 */ + uint32 SSWPLL3; /* 0x002C */ + uint32 CSDIS; /* 0x0030 */ + uint32 CSDISSET; /* 0x0034 */ + uint32 CSDISCLR; /* 0x0038 */ + uint32 CDDIS; /* 0x003C */ + uint32 CDDISSET; /* 0x0040 */ + uint32 CDDISCLR; /* 0x0044 */ + uint32 GHVSRC; /* 0x0048 */ + uint32 VCLKASRC; /* 0x004C */ + uint32 RCLKSRC; /* 0x0050 */ + uint32 CSVSTAT; /* 0x0054 */ + uint32 MSTGCR; /* 0x0058 */ + uint32 MINITGCR; /* 0x005C */ + uint32 MSINENA; /* 0x0060 */ + uint32 MSTFAIL; /* 0x0064 */ + uint32 MSTCGSTAT; /* 0x0068 */ + uint32 MINISTAT; /* 0x006C */ + uint32 PLLCTL1; /* 0x0070 */ + uint32 PLLCTL2; /* 0x0074 */ + uint32 SYSPC10; /* 0x0078 */ + uint32 DIEIDL; /* 0x007C */ + uint32 DIEIDH; /* 0x0080 */ + uint32 VRCTL; /* 0x0084 */ + uint32 LPOMONCTL; /* 0x0088 */ + uint32 CLKTEST; /* 0x008C */ + uint32 DFTCTRLREG1; /* 0x0090 */ + uint32 DFTCTRLREG2; /* 0x0094 */ + uint32 rsvd1; /* 0x0098 */ + uint32 rsvd2; /* 0x009C */ + uint32 GPREG1; /* 0x00A0 */ + uint32 BTRMSEL; /* 0x00A4 */ + uint32 IMPFASTS; /* 0x00A8 */ + uint32 IMPFTADD; /* 0x00AC */ + uint32 SSISR1; /* 0x00B0 */ + uint32 SSISR2; /* 0x00B4 */ + uint32 SSISR3; /* 0x00B8 */ + uint32 SSISR4; /* 0x00BC */ + uint32 RAMGCR; /* 0x00C0 */ + uint32 BMMCR1; /* 0x00C4 */ + uint32 BMMCR2; /* 0x00C8 */ + uint32 CPURSTCR; /* 0x00CC */ + uint32 CLKCNTL; /* 0x00D0 */ + uint32 ECPCNTL; /* 0x00D4 */ + uint32 DSPGCR; /* 0x00D8 */ + uint32 DEVCR1; /* 0x00DC */ + uint32 SYSECR; /* 0x00E0 */ + uint32 SYSESR; /* 0x00E4 */ + uint32 SYSTASR; /* 0x00E8 */ + uint32 GBLSTAT; /* 0x00EC */ + uint32 DEV; /* 0x00F0 */ + uint32 SSIVEC; /* 0x00F4 */ + uint32 SSIF; /* 0x00F8 */ +} systemBASE1_t; + + +/** @def systemREG1 +* @brief System Register Frame 1 Pointer +* +* This pointer is used by the system driver to access the system frame 1 registers. +*/ +#define systemREG1 ((systemBASE1_t *)0xFFFFFF00U) + +/** @def systemPORT +* @brief ECLK GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of System/Eclk +* (use the GIO drivers to access the port pins). +*/ +#define systemPORT ((gioPORT_t *)0xFFFFFF04U) + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* System Register Frame 2 Definition */ +/** @struct systemBase2 +* @brief System Register Frame 2 Definition +* +* This type is used to access the System 2 Registers. +*/ +/** @typedef systemBASE2_t +* @brief System Register Frame 2 Type Definition +* +* This type is used to access the System 2 Registers. +*/ +typedef volatile struct systemBase2 +{ + uint32 PLLCTL3; /* 0x0000 */ + uint32 rsvd1; /* 0x0004 */ + uint32 STCCLKDIV; /* 0x0008 */ + uint32 rsvd2[6U]; /* 0x000C */ + uint32 ECPCNTRL0; /* 0x0024 */ + uint32 rsvd3[5U]; /* 0x0028 */ + uint32 CLK2CNTL; /* 0x003C */ + uint32 VCLKACON1; /* 0x0040 */ + uint32 rsvd4[11U]; /* 0x0044 */ + uint32 CLKSLIP; /* 0x0070 */ + uint32 rsvd5[30U]; /* 0x0074 */ + uint32 EFC_CTLEN; /* 0x00EC */ + uint32 DIEIDL_REG0; /* 0x00F0 */ + uint32 DIEIDH_REG1; /* 0x00F4 */ + uint32 DIEIDL_REG2; /* 0x00F8 */ + uint32 DIEIDH_REG3; /* 0x00FC */ +} systemBASE2_t; + +/** @def systemREG2 +* @brief System Register Frame 2 Pointer +* +* This pointer is used by the system driver to access the system frame 2 registers. +*/ +#define systemREG2 ((systemBASE2_t *)0xFFFFE100U) + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_tcram.h b/include/arch/rm46l8lp/halcogen/reg_tcram.h new file mode 100644 index 0000000..356f35d --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_tcram.h @@ -0,0 +1,94 @@ +/** @file reg_tcram.h +* @brief TCRAM Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* . +* which are relevant for the System driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_TCRAM_H__ +#define __REG_TCRAM_H__ + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +#include "sys_common.h" + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/* Tcram Register Frame Definition */ +/** @struct tcramBase +* @brief TCRAM Wrapper Register Frame Definition +* +* This type is used to access the TCRAM Wrapper Registers. +*/ +/** @typedef tcramBASE_t +* @brief TCRAM Wrapper Register Frame Type Definition +* +* This type is used to access the TCRAM Wrapper Registers. +*/ + +typedef volatile struct tcramBase +{ + uint32 RAMCTRL; /* 0x0000 */ + uint32 RAMTHRESHOLD; /* 0x0004 */ + uint32 RAMOCCUR; /* 0x0008 */ + uint32 RAMINTCTRL; /* 0x000C */ + uint32 RAMERRSTATUS; /* 0x0010 */ + uint32 RAMSERRADDR; /* 0x0014 */ + uint32 rsvd1; /* 0x0018 */ + uint32 RAMUERRADDR; /* 0x001C */ + uint32 rsvd2[4U]; /* 0x0020 */ + uint32 RAMTEST; /* 0x0030 */ + uint32 rsvd3; /* 0x0034 */ + uint32 RAMADDRDECVECT; /* 0x0038 */ + uint32 RAMPERADDR; /* 0x003C */ +} tcramBASE_t; + +#define tcram1REG ((tcramBASE_t *)(0xFFFFF800U)) +#define tcram2REG ((tcramBASE_t *)(0xFFFFF900U)) + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +#endif diff --git a/include/arch/rm46l8lp/halcogen/reg_vim.h b/include/arch/rm46l8lp/halcogen/reg_vim.h new file mode 100644 index 0000000..4922efb --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_vim.h @@ -0,0 +1,110 @@ +/** @file reg_vim.h +* @brief VIM Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* . +* which are relevant for the System driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_VIM_H__ +#define __REG_VIM_H__ + +#include "sys_common.h" + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Vim Register Frame Definition */ +/** @struct vimBase +* @brief Vim Register Frame Definition +* +* This type is used to access the Vim Registers. +*/ +/** @typedef vimBASE_t +* @brief VIM Register Frame Type Definition +* +* This type is used to access the VIM Registers. +*/ +typedef volatile struct vimBase +{ + uint32 IRQINDEX; /* 0x0000 */ + uint32 FIQINDEX; /* 0x0004 */ + uint32 rsvd1; /* 0x0008 */ + uint32 rsvd2; /* 0x000C */ + uint32 FIRQPR0; /* 0x0010 */ + uint32 FIRQPR1; /* 0x0014 */ + uint32 FIRQPR2; /* 0x0018 */ + uint32 FIRQPR3; /* 0x001C */ + uint32 INTREQ0; /* 0x0020 */ + uint32 INTREQ1; /* 0x0024 */ + uint32 INTREQ2; /* 0x0028 */ + uint32 INTREQ3; /* 0x002C */ + uint32 REQMASKSET0; /* 0x0030 */ + uint32 REQMASKSET1; /* 0x0034 */ + uint32 REQMASKSET2; /* 0x0038 */ + uint32 REQMASKSET3; /* 0x003C */ + uint32 REQMASKCLR0; /* 0x0040 */ + uint32 REQMASKCLR1; /* 0x0044 */ + uint32 REQMASKCLR2; /* 0x0048 */ + uint32 REQMASKCLR3; /* 0x004C */ + uint32 WAKEMASKSET0; /* 0x0050 */ + uint32 WAKEMASKSET1; /* 0x0054 */ + uint32 WAKEMASKSET2; /* 0x0058 */ + uint32 WAKEMASKSET3; /* 0x005C */ + uint32 WAKEMASKCLR0; /* 0x0060 */ + uint32 WAKEMASKCLR1; /* 0x0064 */ + uint32 WAKEMASKCLR2; /* 0x0068 */ + uint32 WAKEMASKCLR3; /* 0x006C */ + uint32 IRQVECREG; /* 0x0070 */ + uint32 FIQVECREG; /* 0x0074 */ + uint32 CAPEVT; /* 0x0078 */ + uint32 rsvd3; /* 0x007C */ + uint32 CHANCTRL[32U]; /* 0x0080-0x0FC */ +} vimBASE_t; + +#define vimREG ((vimBASE_t *)0xFFFFFE00U) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/rti.h b/include/arch/rm46l8lp/halcogen/rti.h new file mode 100644 index 0000000..279a8f8 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/rti.h @@ -0,0 +1,326 @@ +/** @file rti.h +* @brief RTI Driver Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the RTI driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + + +#ifndef __RTI_H__ +#define __RTI_H__ + +#include "reg_rti.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* RTI General Definitions */ + +/** @def rtiCOUNTER_BLOCK0 +* @brief Alias name for RTI counter block 0 +* +* This is an alias name for the RTI counter block 0. +* +* @note This value should be used for API argument @a counter +*/ +#define rtiCOUNTER_BLOCK0 0U + +/** @def rtiCOUNTER_BLOCK1 +* @brief Alias name for RTI counter block 1 +* +* This is an alias name for the RTI counter block 1. +* +* @note This value should be used for API argument @a counter +*/ +#define rtiCOUNTER_BLOCK1 1U + +/** @def rtiCOMPARE0 +* @brief Alias name for RTI compare 0 +* +* This is an alias name for the RTI compare 0. +* +* @note This value should be used for API argument @a compare +*/ +#define rtiCOMPARE0 0U + +/** @def rtiCOMPARE1 +* @brief Alias name for RTI compare 1 +* +* This is an alias name for the RTI compare 1. +* +* @note This value should be used for API argument @a compare +*/ +#define rtiCOMPARE1 1U + +/** @def rtiCOMPARE2 +* @brief Alias name for RTI compare 2 +* +* This is an alias name for the RTI compare 2. +* +* @note This value should be used for API argument @a compare +*/ +#define rtiCOMPARE2 2U + +/** @def rtiCOMPARE3 +* @brief Alias name for RTI compare 3 +* +* This is an alias name for the RTI compare 3. +* +* @note This value should be used for API argument @a compare +*/ +#define rtiCOMPARE3 3U + +/** @def rtiNOTIFICATION_COMPARE0 +* @brief Alias name for RTI compare 0 notification +* +* This is an alias name for the RTI compare 0 notification. +* +* @note This value should be used for API argument @a notification +*/ +#define rtiNOTIFICATION_COMPARE0 1U + +/** @def rtiNOTIFICATION_COMPARE1 +* @brief Alias name for RTI compare 1 notification +* +* This is an alias name for the RTI compare 1 notification. +* +* @note This value should be used for API argument @a notification +*/ +#define rtiNOTIFICATION_COMPARE1 2U + +/** @def rtiNOTIFICATION_COMPARE2 +* @brief Alias name for RTI compare 2 notification +* +* This is an alias name for the RTI compare 2 notification. +* +* @note This value should be used for API argument @a notification +*/ +#define rtiNOTIFICATION_COMPARE2 4U + +/** @def rtiNOTIFICATION_COMPARE3 +* @brief Alias name for RTI compare 3 notification +* +* This is an alias name for the RTI compare 3 notification. +* +* @note This value should be used for API argument @a notification +*/ +#define rtiNOTIFICATION_COMPARE3 8U + +/** @def rtiNOTIFICATION_TIMEBASE +* @brief Alias name for RTI timebase notification +* +* This is an alias name for the RTI timebase notification. +* +* @note This value should be used for API argument @a notification +*/ +#define rtiNOTIFICATION_TIMEBASE 0x10000U + +/** @def rtiNOTIFICATION_COUNTER0 +* @brief Alias name for RTI counter block 0 overflow notification +* +* This is an alias name for the RTI counter block 0 overflow notification. +* +* @note This value should be used for API argument @a notification +*/ +#define rtiNOTIFICATION_COUNTER0 0x20000U + +/** @def rtiNOTIFICATION_COUNTER1 +* @brief Alias name for RTI counter block 1 overflow notification +* +* This is an alias name for the RTI counter block 1 overflow notification. +* +* @note This value should be used for API argument @a notification +*/ +#define rtiNOTIFICATION_COUNTER1 0x40000U + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/** @enum dwdViolationTag +* @brief DWD Violations +*/ +typedef enum dwdViolationTag +{ + NoTime_Violation = 0U, + Time_Window_Violation = 1U, + EndTime_Window_Violation = 2U, + StartTime_Window_Violation = 3U, + Key_Seq_Violation = 4U +}dwdViolation_t; + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +/** @enum dwdResetStatusTag +* @brief DWD Reset status +*/ +typedef enum dwdResetStatusTag +{ + No_Reset_Generated = 0U, + Reset_Generated = 1U +}dwdResetStatus_t; + +/* USER CODE BEGIN (3) */ +/* USER CODE END */ + +/** @enum dwwdReactionTag +* @brief DWWD Reaction on vioaltion +*/ +typedef enum dwwdReactionTag +{ + Generate_Reset = 0x00000005U, + Generate_NMI = 0x0000000AU +}dwwdReaction_t; + +/* USER CODE BEGIN (4) */ +/* USER CODE END */ + +/** @enum dwwdWindowSizeTag +* @brief DWWD Window size +*/ +typedef enum dwwdWindowSizeTag +{ + Size_100_Percent = 0x00000005U, + Size_50_Percent = 0x00000050U, + Size_25_Percent = 0x00000500U, + Size_12_5_Percent = 0x00005000U, + Size_6_25_Percent = 0x00050000U, + Size_3_125_Percent = 0x00500000U +}dwwdWindowSize_t; + +/* USER CODE BEGIN (5) */ +/* USER CODE END */ + +/* Configuration registers */ +typedef struct rti_config_reg +{ + uint32 CONFIG_GCTRL; + uint32 CONFIG_TBCTRL; + uint32 CONFIG_CAPCTRL; + uint32 CONFIG_COMPCTRL; + uint32 CONFIG_UDCP0; + uint32 CONFIG_UDCP1; + uint32 CONFIG_UDCP2; + uint32 CONFIG_UDCP3; +} rti_config_reg_t; + + +/* Configuration registers initial value */ +#define RTI_GCTRL_CONFIGVALUE ((uint32)((uint32)0x0U << 16U) | 0x00000000U) +#define RTI_TBCTRL_CONFIGVALUE 0x00000000U +#define RTI_CAPCTRL_CONFIGVALUE (0U | 0U) +#define RTI_COMPCTRL_CONFIGVALUE (0x00000000U | 0x00000000U | 0x00000000U | 0x00000000U) +#define RTI_UDCP0_CONFIGVALUE 50000U +#define RTI_UDCP1_CONFIGVALUE 50000000U +#define RTI_UDCP2_CONFIGVALUE 5000000U +#define RTI_UDCP3_CONFIGVALUE 50000000U + + +/** + * @defgroup RTI RTI + * @brief Real Time Interrupt Module. + * + * The real-time interrupt (RTI) module provides timer functionality for operating systems and for + * benchmarking code. The RTI module can incorporate several counters that define the timebases needed + * for scheduling in the operating system. + * + * Related Files + * - reg_rti.h + * - rti.h + * - rti.c + * @addtogroup RTI + * @{ + */ + +/* RTI Interface Functions */ + +void rtiInit(void); +void rtiStartCounter(uint32 counter); +void rtiStopCounter(uint32 counter); +uint32 rtiResetCounter(uint32 counter); +void rtiSetPeriod(uint32 compare, uint32 period); +uint32 rtiGetPeriod(uint32 compare); +uint32 rtiGetCurrentTick(uint32 compare); +void rtiEnableNotification(uint32 notification); +void rtiDisableNotification(uint32 notification); +void dwdInit(uint16 dwdPreload); +void dwwdInit(dwwdReaction_t Reaction, uint16 dwdPreload, dwwdWindowSize_t Window_Size); +uint32 dwwdGetCurrentDownCounter(void); +void dwdCounterEnable(void); +void dwdSetPreload(uint16 dwdPreload); +void dwdReset(void); +void dwdGenerateSysReset(void); +boolean IsdwdKeySequenceCorrect(void); +dwdResetStatus_t dwdGetStatus(void); +dwdViolation_t dwdGetViolationStatus(void); +void dwdClearFlag(void); +void rtiGetConfigValue(rti_config_reg_t *config_reg, config_value_type_t type); +/** @fn void rtiNotification(uint32 notification) +* @brief Notification of RTI module +* @param[in] notification Select notification of RTI module: +* - rtiNOTIFICATION_COMPARE0: RTI compare 0 notification +* - rtiNOTIFICATION_COMPARE1: RTI compare 1 notification +* - rtiNOTIFICATION_COMPARE2: RTI compare 2 notification +* - rtiNOTIFICATION_COMPARE3: RTI compare 3 notification +* - rtiNOTIFICATION_TIMEBASE: RTI Timebase notification +* - rtiNOTIFICATION_COUNTER0: RTI counter 0 overflow notification +* - rtiNOTIFICATION_COUNTER1: RTI counter 1 overflow notification +* +* @note This function has to be provide by the user. +*/ +void rtiNotification(uint32 notification); + +/* USER CODE BEGIN (6) */ +/* USER CODE END */ + +/**@}*/ +#ifdef __cplusplus +} +#endif /*extern "C" */ + +#endif diff --git a/include/arch/rm46l8lp/halcogen/sci.h b/include/arch/rm46l8lp/halcogen/sci.h new file mode 100644 index 0000000..6853ec1 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/sci.h @@ -0,0 +1,203 @@ +/** @file sci.h +* @brief SCI Driver Definition File +* @date 11-Dec-2018 +* @version 04.07.01 +* +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + + +#ifndef __SCI_H__ +#define __SCI_H__ + +#include "reg_sci.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/** @enum sciIntFlags +* @brief Interrupt Flag Definitions +* +* Used with sciEnableNotification, sciDisableNotification +*/ +enum sciIntFlags +{ + SCI_FE_INT = 0x04000000U, /* framing error */ + SCI_OE_INT = 0x02000000U, /* overrun error */ + SCI_PE_INT = 0x01000000U, /* parity error */ + SCI_RX_INT = 0x00000200U, /* receive buffer ready */ + SCI_TX_INT = 0x00000100U, /* transmit buffer ready */ + SCI_WAKE_INT = 0x00000002U, /* wakeup */ + SCI_BREAK_INT = 0x00000001U /* break detect */ +}; + +/** @def SCI_IDLE +* @brief Alias name for the SCI IDLE Flag +* +* This is an alias name for the SCI IDLE Flag. +* +*/ +#define SCI_IDLE 0x00000004U + +/** @struct sciBase +* @brief SCI Register Definition +* +* This structure is used to access the SCI module registers. +*/ +/** @typedef sciBASE_t +* @brief SCI Register Frame Type Definition +* +* This type is used to access the SCI Registers. +*/ + +enum sciPinSelect +{ + PIN_SCI_TX = 4U, + PIN_SCI_RX = 2U +}; + + +/* Configuration registers */ +typedef struct sci_config_reg +{ + uint32 CONFIG_GCR0; + uint32 CONFIG_GCR1; + uint32 CONFIG_SETINT; + uint32 CONFIG_SETINTLVL; + uint32 CONFIG_FORMAT; + uint32 CONFIG_BRS; + uint32 CONFIG_PIO0; + uint32 CONFIG_PIO1; + uint32 CONFIG_PIO6; + uint32 CONFIG_PIO7; + uint32 CONFIG_PIO8; +} sci_config_reg_t; + + + +/* Configuration registers initial value for SCI*/ +#define SCILIN_GCR0_CONFIGVALUE 0x00000001U +#define SCILIN_GCR1_CONFIGVALUE ((uint32)((uint32)1U << 5U) \ + |(uint32)((uint32)(2U-1U) << 4U) \ + |(uint32)((uint32)0U << 3U) \ + |(uint32)((uint32)0U << 2U) \ + |(uint32)((uint32)1U << 1U) \ + |(uint32)((uint32)0U << 2U) \ + |(uint32)(0x03000080U)) + +#define SCILIN_SETINTLVL_CONFIGVALUE ((uint32)((uint32)0U << 26U) \ + |(uint32)((uint32)0U << 25U) \ + |(uint32)((uint32)0U << 24U) \ + |(uint32)((uint32)0U << 9U) \ + |(uint32)((uint32)0U << 8U) \ + |(uint32)((uint32)0U << 1U) \ + |(uint32)((uint32)0U)) + +#define SCILIN_SETINT_CONFIGVALUE ((uint32)((uint32)0U << 26U) \ + |(uint32)((uint32)0U << 25U) \ + |(uint32)((uint32)0U << 24U) \ + |(uint32)((uint32)0U << 9U) \ + |(uint32)((uint32)0U << 1U) \ + |(uint32)((uint32)0U << 0U)) + +#define SCILIN_FORMAT_CONFIGVALUE (8U - 1U) +#define SCILIN_BRS_CONFIGVALUE (259U) +#define SCILIN_PIO0_CONFIGVALUE ((uint32)((uint32)1U << 2U) | (uint32)((uint32)1U << 1U)) +#define SCILIN_PIO1_CONFIGVALUE ((uint32)((uint32)0U << 2U) | (uint32)((uint32)0U << 1U)) +#define SCILIN_PIO6_CONFIGVALUE ((uint32)((uint32)0U << 2U) | (uint32)((uint32)0U << 1U)) +#define SCILIN_PIO7_CONFIGVALUE ((uint32)((uint32)0U << 2U) | (uint32)((uint32)0U << 1U)) +#define SCILIN_PIO8_CONFIGVALUE ((uint32)((uint32)1U << 2U) | (uint32)((uint32)1U << 1U)) + + + +/** + * @defgroup SCI SCI + * @brief Serial Communication Interface Module. + * + * The SCI module is a universal asynchronous receiver-transmitter that implements the standard nonreturn + * to zero format. The SCI can be used to communicate, for example, through an RS-232 port or over a K-line. + * + * Related Files + * - reg_sci.h + * - sci.h + * - sci.c + * @addtogroup SCI + * @{ + */ + +/* SCI Interface Functions */ +void sciInit(void); +void sciSetFunctional(sciBASE_t *sci, uint32 port); +void sciSetBaudrate(sciBASE_t *sci, uint32 baud); +uint32 sciIsTxReady(sciBASE_t *sci); +void sciSendByte(sciBASE_t *sci, uint8 byte); +void sciSend(sciBASE_t *sci, uint32 length, uint8 * data); +uint32 sciIsRxReady(sciBASE_t *sci); +uint32 sciIsIdleDetected(sciBASE_t *sci); +uint32 sciRxError(sciBASE_t *sci); +uint32 sciReceiveByte(sciBASE_t *sci); +void sciReceive(sciBASE_t *sci, uint32 length, uint8 * data); +void sciEnableNotification(sciBASE_t *sci, uint32 flags); +void sciDisableNotification(sciBASE_t *sci, uint32 flags); +void sciEnableLoopback(sciBASE_t *sci, loopBackType_t Loopbacktype); +void sciDisableLoopback(sciBASE_t *sci); +void sciEnterResetState(sciBASE_t *sci); +void sciExitResetState(sciBASE_t *sci); +void scilinGetConfigValue(sci_config_reg_t *config_reg, config_value_type_t type); +/** @fn void sciNotification(sciBASE_t *sci, uint32 flags) +* @brief Interrupt callback +* @param[in] sci - sci module base address +* @param[in] flags - copy of error interrupt flags +* +* This is a callback that is provided by the application and is called upon +* an interrupt. The parameter passed to the callback is a copy of the +* interrupt flag register. +*/ +void sciNotification(sciBASE_t *sci, uint32 flags); + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ +/**@}*/ +#ifdef __cplusplus +} +#endif + +#endif diff --git a/include/arch/rm46l8lp/halcogen/spi.h b/include/arch/rm46l8lp/halcogen/spi.h new file mode 100644 index 0000000..0dc9dab --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/spi.h @@ -0,0 +1,222 @@ +/** @file spi.h +* @brief SPI Driver Definition File +* @date 11-Dec-2018 +* @version 04.07.01 +* +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __SPI_H__ +#define __SPI_H__ + +#include "reg_spi.h" + +#ifdef __cplusplus +extern "C" { +#endif + + +/** @enum chipSelect +* @brief Transfer Group Chip Select +*/ +enum spiChipSelect +{ + SPI_CS_NONE = 0xFFU, + SPI_CS_0 = 0xFEU, + SPI_CS_1 = 0xFDU, + SPI_CS_2 = 0xFBU, + SPI_CS_3 = 0xF7U, + SPI_CS_4 = 0xEFU, + SPI_CS_5 = 0xDFU, + SPI_CS_6 = 0xBFU, + SPI_CS_7 = 0x7FU +}; + +/** @enum spiPinSelect +* @brief spi Pin Select +*/ +enum spiPinSelect +{ + SPI_PIN_CS0 = 0U, + SPI_PIN_CS1 = 1U, + SPI_PIN_CS2 = 2U, + SPI_PIN_CS3 = 3U, + SPI_PIN_CS4 = 4U, + SPI_PIN_CS5 = 5U, + SPI_PIN_CS6 = 6U, + SPI_PIN_CS7 = 7U, + SPI_PIN_ENA = 8U, + SPI_PIN_CLK = 9U, + SPI_PIN_SIMO = 10U, + SPI_PIN_SOMI = 11U, + SPI_PIN_SIMO_1 = 17U, + SPI_PIN_SIMO_2 = 18U, + SPI_PIN_SIMO_3 = 19U, + SPI_PIN_SIMO_4 = 20U, + SPI_PIN_SIMO_5 = 21U, + SPI_PIN_SIMO_6 = 22U, + SPI_PIN_SIMO_7 = 23U, + SPI_PIN_SOMI_1 = 25U, + SPI_PIN_SOMI_2 = 26U, + SPI_PIN_SOMI_3 = 27U, + SPI_PIN_SOMI_4 = 28U, + SPI_PIN_SOMI_5 = 29U, + SPI_PIN_SOMI_6 = 30U, + SPI_PIN_SOMI_7 = 31U +}; + +/** @enum dataformat +* @brief SPI dataformat register select +*/ +typedef enum dataformat +{ + SPI_FMT_0 = 0U, + SPI_FMT_1 = 1U, + SPI_FMT_2 = 2U, + SPI_FMT_3 = 3U +}SPIDATAFMT_t; + +/** @struct spiDAT1RegConfig +* @brief SPI data register configuration +*/ +typedef struct spiDAT1RegConfig +{ + boolean CS_HOLD; + boolean WDEL; + SPIDATAFMT_t DFSEL; + uint8 CSNR; +}spiDAT1_t; + +/** @enum SpiTxRxDataStatus +* @brief SPI Data Status +*/ +typedef enum SpiTxRxDataStatus +{ + SPI_READY = 0U, + SPI_PENDING = 1U, + SPI_COMPLETED = 2U +}SpiDataStatus_t; + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +typedef struct spi_config_reg +{ + uint32 CONFIG_GCR1; + uint32 CONFIG_INT0; + uint32 CONFIG_LVL; + uint32 CONFIG_PC0; + uint32 CONFIG_PC1; + uint32 CONFIG_PC6; + uint32 CONFIG_PC7; + uint32 CONFIG_PC8; + uint32 CONFIG_DELAY; + uint32 CONFIG_FMT0; + uint32 CONFIG_FMT1; + uint32 CONFIG_FMT2; + uint32 CONFIG_FMT3; +}spi_config_reg_t; + + + + + + + + + + +/** + * @defgroup SPI SPI + * @brief Serial Peripheral Interface Module. + * + * SPI is a high-speed synchronous serial input/output port that allows a serial bit stream of + * programmed length (2 to 16 bits) to be shifted in and out of the device at a programmed bit-transfer rate. + * + * Related Files + * - reg_spi.h + * - spi.h + * - spi.c + * @addtogroup SPI + * @{ + */ + +/* SPI Interface Functions */ +void spiInit(void); +void spiSetFunctional(spiBASE_t *spi, uint32 port); +void spiEnableNotification(spiBASE_t *spi, uint32 flags); +void spiDisableNotification(spiBASE_t *spi, uint32 flags); +uint32 spiTransmitData(spiBASE_t *spi, spiDAT1_t *dataconfig_t, uint32 blocksize, uint16 * srcbuff); +void spiSendData(spiBASE_t *spi, spiDAT1_t *dataconfig_t, uint32 blocksize, uint16 * srcbuff); +uint32 spiReceiveData(spiBASE_t *spi, spiDAT1_t *dataconfig_t, uint32 blocksize, uint16 * destbuff); +void spiGetData(spiBASE_t *spi, spiDAT1_t *dataconfig_t, uint32 blocksize, uint16 * destbuff); +uint32 spiTransmitAndReceiveData(spiBASE_t *spi, spiDAT1_t *dataconfig_t, uint32 blocksize, uint16 * srcbuff, uint16 * destbuff); +void spiSendAndGetData(spiBASE_t *spi, spiDAT1_t *dataconfig_t, uint32 blocksize, uint16 * srcbuff, uint16 * destbuff); +void spiEnableLoopback(spiBASE_t *spi, loopBackType_t Loopbacktype); +void spiDisableLoopback(spiBASE_t *spi); +SpiDataStatus_t SpiTxStatus(spiBASE_t *spi); +SpiDataStatus_t SpiRxStatus(spiBASE_t *spi); + +/** @fn void spiNotification(spiBASE_t *spi, uint32 flags) +* @brief Interrupt callback +* @param[in] spi - Spi module base address +* @param[in] flags - Copy of error interrupt flags +* +* This is a callback that is provided by the application and is called upon +* an interrupt. The parameter passed to the callback is a copy of the +* interrupt flag register. +*/ +void spiNotification(spiBASE_t *spi, uint32 flags); + +/** @fn void spiEndNotification(spiBASE_t *spi) +* @brief Interrupt callback for End of TX or RX data length. +* @param[in] spi - Spi module base address +* +* This is a callback that is provided by the application and is called upon +* an interrupt at the End of TX or RX data length. +*/ +void spiEndNotification(spiBASE_t *spi); + +/**@}*/ +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +#ifdef __cplusplus +} +#endif /*extern "C" */ + +#endif diff --git a/include/arch/rm46l8lp/halcogen/std_nhet.h b/include/arch/rm46l8lp/halcogen/std_nhet.h new file mode 100644 index 0000000..3d7ae2d --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/std_nhet.h @@ -0,0 +1,2499 @@ +/** @file std_nhet.h +* @brief NHET Instruction Definition File +* @date 11-Dec-2018 +* @version 04.07.01 +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + +#ifndef __STD_NHET_H__ +#define __STD_NHET_H__ + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +#include "sys_common.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +#ifndef HET_v2 +# define HET_v2 0 +#endif + +#if ((__little_endian__ == 0) || (__LITTLE_ENDIAN__ == 0) || defined(_TMS470_BIG) || defined(__big_endian__)) + +#ifndef HETBYTE +# define HETBYTE uint8 +#endif + +typedef struct memory_format +{ + uint32 program_word ; + uint32 control_word ; + uint32 data_word ; + uint32 reserved_word ; +} HET_MEMORY ; + +/*---------------------------------------------*/ +/* ACMP INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct acmp_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 : 9 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 coutprv : 1 ; + uint32 : 2 ; + uint32 en_pin_action : 1 ; + uint32 cond_addr : 9 ; + uint32 pin_select : 5 ; + uint32 ext_reg : 1 ; + uint32 : 2 ; + uint32 pin_action : 1 ; + uint32 : 1 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 interrupt_enable : 1 ; + + uint32 data : 25 ; + uint32 : 7 ; + +} ACMP_FIELDS; + +typedef union +{ + ACMP_FIELDS acmp ; + HET_MEMORY memory ; +} ACMP_INSTRUCTION; + + +/*---------------------------------------------*/ +/* ECMP INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct ecmp_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 hr_lr : 1 ; + uint32 angle_compare : 1 ; + uint32 : 7 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 : 3 ; + uint32 en_pin_action : 1 ; + uint32 cond_addr : 9 ; + uint32 pin_select : 5 ; + uint32 : 1 ; + uint32 sub_opcode : 2 ; + uint32 pin_action : 1 ; + uint32 opposite_action : 1 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 interrupt_enable : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} ECMP_FIELDS; + +typedef union +{ + ECMP_FIELDS ecmp ; + HET_MEMORY memory ; +} ECMP_INSTRUCTION; + + +/*---------------------------------------------*/ +/* SCMP INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct scmp_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 : 2 ; + uint32 : 2 ; + uint32 : 5 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 coutprv : 1 ; + uint32 : 2 ; + uint32 en_pin_action : 1 ; + uint32 cond_addr : 9 ; + uint32 pin_select : 5 ; + uint32 : 1 ; + uint32 compare_mode : 2 ; + uint32 pin_action : 1 ; + uint32 : 2 ; + uint32 restart_en : 1 ; + uint32 interrupt_enable : 1 ; + + + uint32 data : 25 ; + uint32 : 7 ; + +} SCMP_FIELDS ; + +typedef union +{ + SCMP_FIELDS scmp ; + HET_MEMORY memory ; +} SCMP_INSTRUCTION; + + +/*---------------------------------------------*/ +/* MCMP INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct mcmp_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 hr_lr : 1 ; + uint32 angle_compare : 1 ; + uint32 : 1 ; + uint32 save_subtract : 1 ; + uint32 : 5 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 : 3 ; + uint32 en_pin_action : 1 ; + uint32 cond_addr : 9 ; + uint32 pin_select : 5 ; + uint32 : 1 ; + uint32 sub_opcode : 1 ; + uint32 order : 1 ; + uint32 pin_action : 1 ; + uint32 opposite_action : 1 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 interrupt_enable : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} MCMP_FIELDS ; + +typedef union +{ + MCMP_FIELDS mcmp ; + HET_MEMORY memory ; +} MCMP_INSTRUCTION; + + +/*---------------------------------------------*/ +/* MOV64 INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct mov64_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 remote_address : 9 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 : 3 ; + uint32 en_pin_action : 1 ; + uint32 cond_addr : 9 ; + uint32 pin_select : 5 ; + uint32 : 1 ; + uint32 compare_mode : 2 ; + uint32 pin_action : 1 ; + uint32 opposite_action : 1 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 interrupt_enable : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} MOV64_FIELDS ; + +typedef union +{ + MOV64_FIELDS mov64 ; + HET_MEMORY memory ; +} MOV64_INSTRUCTION; + + +/*---------------------------------------------*/ +/* DADM64 INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct dadm64_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 remote_address : 9 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 : 3 ; + uint32 en_pin_action : 1 ; + uint32 cond_addr : 9 ; + uint32 pin_select : 5 ; + uint32 : 1 ; + uint32 compare_mode : 2 ; + uint32 pin_action : 1 ; + uint32 opposite_action : 1 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 interrupt_enable : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} DADM64_FIELDS ; + +typedef union +{ + DADM64_FIELDS dadm64 ; + HET_MEMORY memory ; +} DADM64_INSTRUCTION; + + +/*---------------------------------------------*/ +/* RADM64 INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct RADM64_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 remote_address : 9 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 : 3 ; + uint32 en_pin_action : 1 ; + uint32 cond_addr : 9 ; + uint32 pin_select : 5 ; + uint32 : 1 ; + uint32 compare_mode : 2 ; + uint32 pin_action : 1 ; + uint32 opposite_action : 1 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 interrupt_enable : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} RADM64_FIELDS ; + + +typedef union +{ + RADM64_FIELDS radm64 ; + HET_MEMORY memory ; +} RADM64_INSTRUCTION; + + +/*---------------------------------------------*/ +/* MOV32 INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct MOV32_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 remote_address : 9 ; + + uint32 : 5 ; + uint32 auto_read_clear : 1 ; + uint32 : 3 ; + uint32 z_flag : 1 ; + uint32 : 15 ; + uint32 init_flag : 1 ; + uint32 sub_opcode : 1 ; + uint32 move_type : 2 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} MOV32_FIELDS ; + + +typedef union +{ + MOV32_FIELDS mov32 ; + HET_MEMORY memory ; +} MOV32_INSTRUCTION; + + +/*---------------------------------------------*/ +/* ADM32 INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct ADM32_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 remote_address : 9 ; + + uint32 : 5 ; + uint32 auto_read_clear : 1 ; + uint32 : 19 ; + uint32 init_flag : 1 ; + uint32 sub_opcode : 1 ; + uint32 move_type : 2 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} ADM32_FIELDS ; + + +typedef union +{ + ADM32_FIELDS adm32 ; + HET_MEMORY memory ; +} ADM32_INSTRUCTION; + + +/*---------------------------------------------*/ +/* ADCNST INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct ADCNST_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 remote_address : 9 ; + + uint32 : 5 ; + uint32 control : 1 ; /* pk */ + uint32 : 1 ; + uint32 constant : 25 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} ADCNST_FIELDS ; + + +typedef union +{ + ADCNST_FIELDS adcnst ; + HET_MEMORY memory ; +} ADCNST_INSTRUCTION; + + +/*----------------------------------------------*/ +/* ADD INSTRUCTION */ +/*----------------------------------------------*/ + +typedef struct ADD_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 remote_address : 9 ; + + uint32 : 5 ; + uint32 control : 1; + uint32 sub_opcode3 : 3 ; + uint32 src_1 : 4 ; + uint32 src_2 : 3 ; + uint32 shft_mode : 3 ; + uint32 shft_cnt : 5 ; + uint32 reg_ext : 1 ; + uint32 init_flag : 1 ; + uint32 sub_opcode1 : 1 ; + uint32 rem_dest : 2 ; + uint32 reg : 2 ; + uint32 : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} ADD_FIELDS ; + + +typedef union +{ + ADD_FIELDS add ; + HET_MEMORY memory ; +} ADD_INSTRUCTION; + + + +/*----------------------------------------------*/ +/* ADC INSTRUCTION */ +/*----------------------------------------------*/ + +typedef struct ADC_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 remote_address : 9 ; + + uint32 : 5 ; + uint32 control : 1; + uint32 sub_opcode3 : 3 ; + uint32 src_1 : 4 ; + uint32 src_2 : 3 ; + uint32 shft_mode : 3 ; + uint32 shft_cnt : 5 ; + uint32 reg_ext : 1 ; + uint32 init_flag : 1 ; + uint32 sub_opcode1 : 1 ; + uint32 rem_dest : 2 ; + uint32 reg : 2 ; + uint32 : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} ADC_FIELDS ; + + +typedef union +{ + ADC_FIELDS adc ; + HET_MEMORY memory ; +} ADC_INSTRUCTION; + + + +/*----------------------------------------------*/ +/* SUB INSTRUCTION */ +/*----------------------------------------------*/ + +typedef struct SUB_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 remote_address : 9 ; + + uint32 : 5 ; + uint32 control : 1; + uint32 sub_opcode3 : 3 ; + uint32 src_1 : 4 ; + uint32 src_2 : 3 ; + uint32 shft_mode : 3 ; + uint32 shft_cnt : 5 ; + uint32 reg_ext : 1 ; + uint32 init_flag : 1 ; + uint32 sub_opcode1 : 1 ; + uint32 rem_dest : 2 ; + uint32 reg : 2 ; + uint32 : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} SUB_FIELDS ; + + +typedef union +{ + SUB_FIELDS sub ; + HET_MEMORY memory ; +} SUB_INSTRUCTION; + + + +/*----------------------------------------------*/ +/* SBB INSTRUCTION */ +/*----------------------------------------------*/ + +typedef struct SBB_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 remote_address : 9 ; + + uint32 : 5 ; + uint32 control : 1; + uint32 sub_opcode3 : 3 ; + uint32 src_1 : 4 ; + uint32 src_2 : 3 ; + uint32 shft_mode : 3 ; + uint32 shft_cnt : 5 ; + uint32 reg_ext : 1 ; + uint32 init_flag : 1 ; + uint32 sub_opcode1 : 1 ; + uint32 rem_dest : 2 ; + uint32 reg : 2 ; + uint32 : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} SBB_FIELDS ; + + +typedef union +{ + SBB_FIELDS sbb ; + HET_MEMORY memory ; +} SBB_INSTRUCTION; + + + +/*----------------------------------------------*/ +/* AND INSTRUCTION */ +/*----------------------------------------------*/ + +typedef struct AND_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 remote_address : 9 ; + + uint32 : 5 ; + uint32 control : 1; + uint32 sub_opcode3 : 3 ; + uint32 src_1 : 4 ; + uint32 src_2 : 3 ; + uint32 shft_mode : 3 ; + uint32 shft_cnt : 5 ; + uint32 reg_ext : 1 ; + uint32 init_flag : 1 ; + uint32 sub_opcode1 : 1 ; + uint32 rem_dest : 2 ; + uint32 reg : 2 ; + uint32 : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} AND_FIELDS ; + + +typedef union +{ +#ifdef __cplusplus + AND_FIELDS and_cpp ; +#else + AND_FIELDS and ; +#endif + HET_MEMORY memory ; +} AND_INSTRUCTION; + + + +/*----------------------------------------------*/ +/* OR INSTRUCTION */ +/*----------------------------------------------*/ + + +typedef struct OR_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 remote_address : 9 ; + + uint32 : 5 ; + uint32 control : 1; + uint32 sub_opcode3 : 3 ; + uint32 src_1 : 4 ; + uint32 src_2 : 3 ; + uint32 shft_mode : 3 ; + uint32 shft_cnt : 5 ; + uint32 reg_ext : 1 ; + uint32 init_flag : 1 ; + uint32 sub_opcode1 : 1 ; + uint32 rem_dest : 2 ; + uint32 reg : 2 ; + uint32 : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} OR_FIELDS ; + + +typedef union +{ +#ifdef __cplusplus + OR_FIELDS or_cpp ; +#else + OR_FIELDS or ; +#endif + HET_MEMORY memory ; +} OR_INSTRUCTION; + + + +/*----------------------------------------------*/ +/* XOR INSTRUCTION */ +/*----------------------------------------------*/ + +typedef struct XOR_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 remote_address : 9 ; + + uint32 : 5 ; + uint32 control : 1; + uint32 sub_opcode3 : 3 ; + uint32 src_1 : 4 ; + uint32 src_2 : 3 ; + uint32 shft_mode : 3 ; + uint32 shft_cnt : 5 ; + uint32 reg_ext : 1 ; + uint32 init_flag : 1 ; + uint32 sub_opcode1 : 1 ; + uint32 rem_dest : 2 ; + uint32 reg : 2 ; + uint32 : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} XOR_FIELDS ; + + +typedef union +{ +#ifdef __cplusplus + XOR_FIELDS xor_cpp ; +#else + XOR_FIELDS xor ; +#endif + HET_MEMORY memory ; +} XOR_INSTRUCTION; + + + +/*---------------------------------------------*/ +/* CNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct CNT_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 angle_cnt : 1 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 : 4 ; + uint32 interrupt_enable : 1 ; + + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 : 1 ; + uint32 max : 25 ; + + + uint32 data : 25 ; + uint32 : 7 ; + +} CNT_FIELDS ; + +typedef union +{ + CNT_FIELDS cnt ; + HET_MEMORY memory ; +} CNT_INSTRUCTION; + + +/*---------------------------------------------*/ +/* APCNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct apcnt_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 interrupt_enable : 1 ; + uint32 edge_select : 2 ; + uint32 : 6 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 previous_bit : 1 ; + uint32 count : 25 ; + + + uint32 data : 25 ; + uint32 : 7 ; + +} APCNT_FIELDS ; + +typedef union +{ + APCNT_FIELDS apcnt ; + HET_MEMORY memory ; +} APCNT_INSTRUCTION; + + + +/*---------------------------------------------*/ +/* PCNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct pcnt_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 interrupt_enable : 1 ; + uint32 period_pulse_select : 2 ; + uint32 : 1 ; + uint32 pin_select : 5 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 previous_bit : 1 ; + uint32 count : 25 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} PCNT_FIELDS ; + +typedef union +{ + PCNT_FIELDS pcnt ; + HET_MEMORY memory ; +} PCNT_INSTRUCTION; + + +/*---------------------------------------------*/ +/* SCNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct scnt_format +{ + uint32 : 9 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 : 1 ; + uint32 count_mode : 2 ; + uint32 step_width : 2 ; + uint32 : 4 ; + + uint32 : 5 ; + uint32 auto_read_clear : 1 ; + uint32 : 1 ; + uint32 gap_start : 25 ; + + + uint32 data : 25 ; + uint32 : 7 ; + +} SCNT_FIELDS ; + +typedef union +{ + SCNT_FIELDS scnt ; + HET_MEMORY memory ; +} SCNT_INSTRUCTION; + + + +/*---------------------------------------------*/ +/* ACNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct acnt_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 edge_select : 1 ; + uint32 : 7 ; + uint32 interrupt_enable : 1 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 previous_bit : 1 ; + uint32 gap_end : 25 ; + + + uint32 data : 25 ; + uint32 : 7 ; + +} ACNT_FIELDS ; + +typedef union +{ + ACNT_FIELDS acnt ; + HET_MEMORY memory ; +} ACNT_INSTRUCTION; + + +/*---------------------------------------------*/ +/* ECNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct ecnt_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 : 1 ; + uint32 count_mode : 2 ; + uint32 : 6 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 previous_bit : 1 ; + uint32 : 3 ; + uint32 cond_addr : 9 ; + uint32 pin_select : 5 ; + uint32 : 1 ; + uint32 count_cond : 3 ; + uint32 : 1 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 interrupt_enable : 1 ; + + + uint32 data : 25 ; + uint32 : 7 ; + +} ECNT_FIELDS ; + +typedef union +{ + ECNT_FIELDS ecnt ; + HET_MEMORY memory ; +} ECNT_INSTRUCTION; + + + +/*---------------------------------------------*/ +/* RCNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct rcnt_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 : 1 ; + uint32 count_mode : 2 ; + uint32 : 5 ; + uint32 count_mode1 : 1 ; + + uint32 : 3 ; + uint32 : 2 ; + uint32 control : 1 ; + uint32 : 1 ; + uint32 divisor : 25 ; + + + uint32 data : 25 ; + uint32 : 7 ; + +} RCNT_FIELDS ; + +typedef union +{ + RCNT_FIELDS rcnt ; + HET_MEMORY memory ; +} RCNT_INSTRUCTION; + + +/*---------------------------------------------*/ +/* DJNZ INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct djnz_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 : 1 ; + uint32 sub_opcode : 2 ; + uint32 : 6 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 : 4 ; + uint32 cond_addr : 9 ; + uint32 : 10 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 interrupt_enable : 1 ; + + + uint32 data : 25 ; + uint32 : 7 ; + +} DJNZ_FIELDS ; + +typedef union +{ + DJNZ_FIELDS djnz ; + HET_MEMORY memory ; +} DJNZ_INSTRUCTION; + + +/*---------------------------------------------*/ +/* DJZ INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct djz_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 : 1 ; + uint32 sub_opcode : 2 ; + uint32 : 6 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 : 4 ; + uint32 cond_addr : 9 ; + uint32 : 10 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 interrupt_enable : 1 ; + + + uint32 data : 25 ; + uint32 : 7 ; + +} DJZ_FIELDS ; + +typedef union +{ + DJZ_FIELDS djz ; + HET_MEMORY memory ; +} DJZ_INSTRUCTION; + +/*---------------------------------------------*/ +/* PWCNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct pwcnt_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 hr_lr : 1 ; + uint32 count_mode : 2 ; + uint32 : 6 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 : 3 ; + uint32 en_pin_action : 1 ; + uint32 cond_addr : 9 ; + uint32 pin_select : 5 ; + uint32 : 3 ; + uint32 pin_action : 1 ; + uint32 opposite_action : 1 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 interrupt_enable : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} PWCNT_FIELDS ; + +typedef union +{ + PWCNT_FIELDS pwcnt ; + HET_MEMORY memory ; +} PWCNT_INSTRUCTION; + + +/*---------------------------------------------*/ +/* WCAP INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct wcap_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 hr_lr : 1 ; + uint32 : 8 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 previous_bit : 1 ; + uint32 : 3 ; + uint32 cond_addr : 9 ; + uint32 pin_select : 5 ; + uint32 : 1 ; + uint32 capture_condition : 2 ; + uint32 : 2 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 interrupt_enable : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} WCAP_FIELDS ; + +typedef union +{ + WCAP_FIELDS wcap ; + HET_MEMORY memory ; +} WCAP_INSTRUCTION; + +/*----------------------------------------------*/ +/* WCAPE INSTRUCTION */ +/*----------------------------------------------*/ +typedef struct wcape_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 : 9 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 previous_bit : 1 ; + uint32 : 3 ; + uint32 cond_addr : 9 ; + uint32 pin_select : 5 ; + uint32 : 1 ; + uint32 capture_condition : 2 ; + uint32 : 2 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 interrupt_enable : 1 ; + + + uint32 ts_data : 25 ; + uint32 ec_data : 7 ; + +} WCAPE_FIELDS ; + +typedef union +{ + WCAPE_FIELDS wcape ; + HET_MEMORY memory ; +} WCAPE_INSTRUCTION; + + +/*---------------------------------------------*/ +/* BR INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct br_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 : 9 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 previous_bit : 1 ; + uint32 : 3 ; + uint32 cond_addr : 9 ; + uint32 pin_select : 5 ; + +#if HET_v2 + uint32 branch_condition : 5 ; +#else + uint32 branch_condition : 3 ; + uint32 : 1 ; + uint32 : 1 ; +#endif + + uint32 : 2 ; + uint32 interrupt_enable : 1 ; + + + uint32 data : 25 ; + uint32 hr_data : 7 ; + +} BR_FIELDS ; + +typedef union +{ + BR_FIELDS br ; + HET_MEMORY memory ; +} BR_INSTRUCTION; + + +/*---------------------------------------------*/ +/* SHFT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct shft_format +{ + uint32 : 6 ; + uint32 reqnum : 3 ; + uint32 brk : 1 ; + uint32 next_program_address : 9 ; + uint32 op_code : 4 ; + uint32 : 5 ; + uint32 shift_mode : 4 ; + + uint32 : 3 ; + uint32 request : 2 ; + uint32 auto_read_clear : 1 ; + uint32 previous_bit : 1 ; + uint32 : 3 ; + uint32 cond_addr : 9 ; + uint32 pin_select : 5 ; + uint32 : 1 ; + uint32 shift_condition : 2 ; + uint32 : 2 ; + uint32 t_register_select : 1 ; + uint32 ab_register_select : 1 ; + uint32 interrupt_enable : 1 ; + + + uint32 data : 25 ; + uint32 : 7 ; + +} SHFT_FIELDS ; + +typedef union +{ + SHFT_FIELDS shft ; + HET_MEMORY memory ; +} SHFT_INSTRUCTION; + +/* ---------------------------------------------------------------------------------------------------- */ + +#else + +#ifndef HETBYTE +# define HETBYTE uint8 +#endif + +typedef struct memory_format +{ + uint32 program_word ; + uint32 control_word ; + uint32 data_word ; + uint32 reserved_word ; +} HET_MEMORY ; + +/*---------------------------------------------*/ +/* ACMP INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct acmp_format +{ + uint32 : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 interrupt_enable : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 : 1 ; + uint32 pin_action : 1 ; + uint32 : 3 ; + uint32 pin_select : 5 ; + uint32 cond_addr : 9 ; + uint32 en_pin_action : 1 ; + uint32 : 2 ; + uint32 coutprv : 1 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 : 7 ; + uint32 data : 25 ; + +} ACMP_FIELDS; + +typedef union +{ + ACMP_FIELDS acmp ; + HET_MEMORY memory ; +} ACMP_INSTRUCTION; + + +/*---------------------------------------------*/ +/* ECMP INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct ecmp_format +{ + uint32 : 7 ; + uint32 angle_compare : 1 ; + uint32 hr_lr : 1 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 interrupt_enable : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 opposite_action : 1 ; + uint32 pin_action : 1 ; + uint32 sub_opcode : 2 ; + uint32 : 1 ; + uint32 pin_select : 5 ; + uint32 cond_addr : 9 ; + uint32 en_pin_action : 1 ; + uint32 : 3 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + +} ECMP_FIELDS; + +typedef union +{ + ECMP_FIELDS ecmp ; + HET_MEMORY memory ; +} ECMP_INSTRUCTION; + + +/*---------------------------------------------*/ +/* SCMP INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct scmp_format +{ + uint32 : 5 ; + uint32 : 2 ; + uint32 : 2 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 interrupt_enable : 1 ; + uint32 restart_en : 1 ; + uint32 : 2 ; + uint32 pin_action : 1 ; + uint32 compare_mode : 2 ; + uint32 : 1 ; + uint32 pin_select : 5 ; + uint32 cond_addr : 9 ; + uint32 en_pin_action : 1 ; + uint32 : 2 ; + uint32 coutprv : 1 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 : 7 ; + uint32 data : 25 ; + +} SCMP_FIELDS ; + +typedef union +{ + SCMP_FIELDS scmp ; + HET_MEMORY memory ; +} SCMP_INSTRUCTION; + + +/*---------------------------------------------*/ +/* MCMP INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct mcmp_format +{ + uint32 : 5 ; + uint32 save_subtract : 1 ; + uint32 : 1 ; + uint32 angle_compare : 1 ; + uint32 hr_lr : 1 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 interrupt_enable : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 opposite_action : 1 ; + uint32 pin_action : 1 ; + uint32 order : 1 ; + uint32 sub_opcode : 1 ; + uint32 : 1 ; + uint32 pin_select : 5 ; + uint32 cond_addr : 9 ; + uint32 en_pin_action : 1 ; + uint32 : 3 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + + uint32 hr_data : 7 ; + uint32 data : 25 ; + +} MCMP_FIELDS ; + +typedef union +{ + MCMP_FIELDS mcmp ; + HET_MEMORY memory ; +} MCMP_INSTRUCTION; + +/*---------------------------------------------*/ +/* MOV64 INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct mov64_format +{ + uint32 remote_address : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 interrupt_enable : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 opposite_action : 1 ; + uint32 pin_action : 1 ; + uint32 compare_mode : 2 ; + uint32 : 1 ; + uint32 pin_select : 5 ; + uint32 cond_addr : 9 ; + uint32 en_pin_action : 1 ; + uint32 : 3 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + +} MOV64_FIELDS ; + +typedef union +{ + MOV64_FIELDS mov64 ; + HET_MEMORY memory ; +} MOV64_INSTRUCTION; + + +/*---------------------------------------------*/ +/* DADM64 INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct dadm64_format +{ + uint32 remote_address : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 interrupt_enable : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 opposite_action : 1 ; + uint32 pin_action : 1 ; + uint32 compare_mode : 2 ; + uint32 : 1 ; + uint32 pin_select : 5 ; + uint32 cond_addr : 9 ; + uint32 en_pin_action : 1 ; + uint32 : 3 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + +} DADM64_FIELDS ; + +typedef union +{ + DADM64_FIELDS dadm64 ; + HET_MEMORY memory ; +} DADM64_INSTRUCTION; + + +/*---------------------------------------------*/ +/* RADM64 INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct RADM64_format +{ + uint32 remote_address : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 interrupt_enable : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 opposite_action : 1 ; + uint32 pin_action : 1 ; + uint32 compare_mode : 2 ; + uint32 : 1 ; + uint32 pin_select : 5 ; + uint32 cond_addr : 9 ; + uint32 en_pin_action : 1 ; + uint32 : 3 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + +} RADM64_FIELDS ; + + +typedef union +{ + RADM64_FIELDS radm64 ; + HET_MEMORY memory ; +} RADM64_INSTRUCTION; + + +/*---------------------------------------------*/ +/* MOV32 INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct MOV32_format +{ + uint32 remote_address : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 move_type : 2 ; + uint32 sub_opcode : 1 ; + uint32 init_flag : 1 ; + uint32 : 15 ; + uint32 z_flag : 1 ; + uint32 : 3 ; + uint32 auto_read_clear : 1 ; + uint32 : 5 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + +} MOV32_FIELDS ; + + +typedef union +{ + MOV32_FIELDS mov32 ; + HET_MEMORY memory ; +} MOV32_INSTRUCTION; + + +/*---------------------------------------------*/ +/* ADM32 INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct ADM32_format +{ + uint32 remote_address : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 move_type : 2 ; + uint32 sub_opcode : 1 ; + uint32 init_flag : 1 ; + uint32 : 19 ; + uint32 auto_read_clear : 1 ; + uint32 : 5 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + +} ADM32_FIELDS ; + + +typedef union +{ + ADM32_FIELDS adm32 ; + HET_MEMORY memory ; +} ADM32_INSTRUCTION; + + +/*---------------------------------------------*/ +/* ADCNST INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct ADCNST_format +{ + uint32 remote_address : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 constant : 25 ; + uint32 : 1 ; + uint32 : 5 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + +} ADCNST_FIELDS ; + + +typedef union +{ + ADCNST_FIELDS adcnst ; + HET_MEMORY memory ; +} ADCNST_INSTRUCTION; + + + +/*----------------------------------------------*/ +/* ADD INSTRUCTION */ +/*----------------------------------------------*/ +typedef struct ADD_format +{ + + uint32 remote_address : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 : 1 ; + uint32 reg : 2 ; + uint32 rem_dest : 2 ; + uint32 sub_opcode1 : 1 ; + uint32 init_flag : 1 ; + uint32 reg_ext : 1 ; + uint32 shft_cnt : 5 ; + uint32 shft_mode : 3 ; + uint32 src_2 : 3 ; + uint32 src_1 : 4 ; + uint32 sub_opcode3 : 3 ; + uint32 control : 1 ; + uint32 : 5 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + + +} ADD_FIELDS ; + + +typedef union +{ + ADD_FIELDS add ; + HET_MEMORY memory ; +} ADD_INSTRUCTION; + + + + +/*----------------------------------------------*/ +/* ADC INSTRUCTION */ +/*----------------------------------------------*/ + + +typedef struct ADC_format +{ + + uint32 remote_address : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 : 1 ; + uint32 reg : 2 ; + uint32 rem_dest : 2 ; + uint32 sub_opcode1 : 1 ; + uint32 init_flag : 1 ; + uint32 reg_ext : 1 ; + uint32 shft_cnt : 5 ; + uint32 shft_mode : 3 ; + uint32 src_2 : 3 ; + uint32 src_1 : 4 ; + uint32 sub_opcode3 : 3 ; + uint32 control : 1 ; + uint32 : 5 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + + +} ADC_FIELDS ; + + +typedef union +{ + ADC_FIELDS adc ; + HET_MEMORY memory ; +} ADC_INSTRUCTION; + + + + +/*----------------------------------------------*/ +/* SUB INSTRUCTION */ +/*----------------------------------------------*/ + +typedef struct SUB_format +{ + + uint32 remote_address : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 : 1 ; + uint32 reg : 2 ; + uint32 rem_dest : 2 ; + uint32 sub_opcode1 : 1 ; + uint32 init_flag : 1 ; + uint32 reg_ext : 1 ; + uint32 shft_cnt : 5 ; + uint32 shft_mode : 3 ; + uint32 src_2 : 3 ; + uint32 src_1 : 4 ; + uint32 sub_opcode3 : 3 ; + uint32 control : 1 ; + uint32 : 5 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + + +} SUB_FIELDS ; + + +typedef union +{ + SUB_FIELDS sub ; + HET_MEMORY memory ; +} SUB_INSTRUCTION; + + + + + +/*----------------------------------------------*/ +/* SBB INSTRUCTION */ +/*----------------------------------------------*/ + +typedef struct SBB_format +{ + + uint32 remote_address : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 : 1 ; + uint32 reg : 2 ; + uint32 rem_dest : 2 ; + uint32 sub_opcode1 : 1 ; + uint32 init_flag : 1 ; + uint32 reg_ext : 1 ; + uint32 shft_cnt : 5 ; + uint32 shft_mode : 3 ; + uint32 src_2 : 3 ; + uint32 src_1 : 4 ; + uint32 sub_opcode3 : 3 ; + uint32 control : 1 ; + uint32 : 5 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + + +} SBB_FIELDS ; + + +typedef union +{ + SBB_FIELDS sbb ; + HET_MEMORY memory ; +} SBB_INSTRUCTION; + + + + +/*----------------------------------------------*/ +/* AND INSTRUCTION */ +/*----------------------------------------------*/ + +typedef struct AND_format +{ + + uint32 remote_address : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 : 1 ; + uint32 reg : 2 ; + uint32 rem_dest : 2 ; + uint32 sub_opcode1 : 1 ; + uint32 init_flag : 1 ; + uint32 reg_ext : 1 ; + uint32 shft_cnt : 5 ; + uint32 shft_mode : 3 ; + uint32 src_2 : 3 ; + uint32 src_1 : 4 ; + uint32 sub_opcode3 : 3 ; + uint32 control : 1 ; + uint32 : 5 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + + +} AND_FIELDS ; + + +typedef union +{ +#ifdef __cplusplus + AND_FIELDS and_cpp ; +#else + AND_FIELDS and ; +#endif + HET_MEMORY memory ; +} AND_INSTRUCTION; + + + +/*----------------------------------------------*/ +/* OR INSTRUCTION */ +/*----------------------------------------------*/ + +typedef struct OR_format +{ + + uint32 remote_address : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 : 1 ; + uint32 reg : 2 ; + uint32 rem_dest : 2 ; + uint32 sub_opcode1 : 1 ; + uint32 init_flag : 1 ; + uint32 reg_ext : 1 ; + uint32 shft_cnt : 5 ; + uint32 shft_mode : 3 ; + uint32 src_2 : 3 ; + uint32 src_1 : 4 ; + uint32 sub_opcode3 : 3 ; + uint32 control : 1 ; + uint32 : 5 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + + +} OR_FIELDS ; + + +typedef union +{ +#ifdef __cplusplus + OR_FIELDS or_cpp ; +#else + OR_FIELDS or ; +#endif + HET_MEMORY memory ; +} OR_INSTRUCTION; + + + +/*----------------------------------------------*/ +/* XOR INSTRUCTION */ +/*----------------------------------------------*/ + +typedef struct XOR_format +{ + + uint32 remote_address : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 : 1 ; + uint32 reg : 2 ; + uint32 rem_dest : 2 ; + uint32 sub_opcode1 : 1 ; + uint32 init_flag : 1 ; + uint32 reg_ext : 1 ; + uint32 shft_cnt : 5 ; + uint32 shft_mode : 3 ; + uint32 src_2 : 3 ; + uint32 src_1 : 4 ; + uint32 sub_opcode3 : 3 ; + uint32 control : 1 ; + uint32 : 5 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + + +} XOR_FIELDS ; + + +typedef union +{ +#ifdef __cplusplus + XOR_FIELDS xor_cpp ; +#else + XOR_FIELDS xor ; +#endif + HET_MEMORY memory ; +} XOR_INSTRUCTION; + + + + +/*---------------------------------------------*/ +/* CNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct CNT_format +{ + uint32 interrupt_enable : 1 ; + uint32 : 4 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 angle_cnt : 1 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 max : 25 ; + uint32 : 1 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 : 7 ; + uint32 data : 25 ; + +} CNT_FIELDS ; + +typedef union +{ + CNT_FIELDS cnt ; + HET_MEMORY memory ; +} CNT_INSTRUCTION; + + +/*---------------------------------------------*/ +/* APCNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct apcnt_format +{ + uint32 : 6 ; + uint32 edge_select : 2 ; + uint32 interrupt_enable : 1 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 count : 25 ; + uint32 previous_bit : 1 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 : 7 ; + uint32 data : 25 ; + +} APCNT_FIELDS ; + +typedef union +{ + APCNT_FIELDS apcnt ; + HET_MEMORY memory ; +} APCNT_INSTRUCTION; + + + +/*---------------------------------------------*/ +/* PCNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct pcnt_format +{ + uint32 pin_select : 5 ; + uint32 : 1 ; + uint32 period_pulse_select : 2 ; + uint32 interrupt_enable : 1 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 count : 25 ; + uint32 previous_bit : 1 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + +} PCNT_FIELDS ; + +typedef union +{ + PCNT_FIELDS pcnt ; + HET_MEMORY memory ; +} PCNT_INSTRUCTION; + + +/*---------------------------------------------*/ +/* SCNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct scnt_format +{ + uint32 : 4 ; + uint32 step_width : 2 ; + uint32 count_mode : 2 ; + uint32 : 1 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 : 9 ; + + uint32 gap_start : 25 ; + uint32 : 1 ; + uint32 auto_read_clear : 1 ; + uint32 : 5 ; + + uint32 : 7 ; + uint32 data : 25 ; + +} SCNT_FIELDS ; + +typedef union +{ + SCNT_FIELDS scnt ; + HET_MEMORY memory ; +} SCNT_INSTRUCTION; + +/*---------------------------------------------*/ +/* ACNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct acnt_format +{ + uint32 interrupt_enable : 1 ; + uint32 : 7 ; + uint32 edge_select : 1 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 gap_end : 25 ; + uint32 previous_bit : 1 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 : 7 ; + uint32 data : 25 ; + +} ACNT_FIELDS ; + +typedef union +{ + ACNT_FIELDS acnt ; + HET_MEMORY memory ; +} ACNT_INSTRUCTION; + + +/*---------------------------------------------*/ +/* ECNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct ecnt_format +{ + uint32 : 6 ; + uint32 count_mode : 2 ; + uint32 : 1 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 interrupt_enable : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 : 1 ; + uint32 count_cond : 3 ; + uint32 : 1 ; + uint32 pin_select : 5 ; + uint32 cond_addr : 9 ; + uint32 : 3 ; + uint32 previous_bit : 1 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 : 7 ; + uint32 data : 25 ; + + +} ECNT_FIELDS ; + +typedef union +{ + ECNT_FIELDS ecnt ; + HET_MEMORY memory ; +} ECNT_INSTRUCTION; + +/*---------------------------------------------*/ +/* RCNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct rcnt_format +{ + + uint32 count_mode1 : 1 ; + uint32 : 5 ; + uint32 count_mode : 2 ; + uint32 : 1 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + + uint32 divisor : 25 ; + uint32 : 1 ; + uint32 control : 1 ; + uint32 : 2 ; + uint32 : 3 ; + + uint32 : 7 ; + uint32 data : 25 ; + + +} RCNT_FIELDS ; + +typedef union +{ + RCNT_FIELDS rcnt ; + HET_MEMORY memory ; +} RCNT_INSTRUCTION; + + +/*---------------------------------------------*/ +/* DJNZ INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct djnz_format +{ + uint32 : 6 ; + uint32 sub_opcode : 2 ; + uint32 : 1 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 interrupt_enable : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 : 10 ; + uint32 cond_addr : 9 ; + uint32 : 4 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 : 7 ; + uint32 data : 25 ; + +} DJNZ_FIELDS ; + +typedef union +{ + DJNZ_FIELDS djnz ; + HET_MEMORY memory ; +} DJNZ_INSTRUCTION; + + +/*---------------------------------------------*/ +/* DJZ INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct djz_format +{ + uint32 : 6 ; + uint32 sub_opcode : 2 ; + uint32 : 1 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 interrupt_enable : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 : 10 ; + uint32 cond_addr : 9 ; + uint32 : 4 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 : 7 ; + uint32 data : 25 ; + +} DJZ_FIELDS ; + +typedef union +{ + DJZ_FIELDS djz ; + HET_MEMORY memory ; +} DJZ_INSTRUCTION; + +/*---------------------------------------------*/ +/* PWCNT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct pwcnt_format +{ + uint32 : 6 ; + uint32 count_mode : 2 ; + uint32 hr_lr : 1 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 interrupt_enable : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 opposite_action : 1 ; + uint32 pin_action : 1 ; + uint32 : 3 ; + uint32 pin_select : 5 ; + uint32 cond_addr : 9 ; + uint32 en_pin_action : 1 ; + uint32 : 3 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + + uint32 hr_data : 7 ; + uint32 data : 25 ; + +} PWCNT_FIELDS ; + +typedef union +{ + PWCNT_FIELDS pwcnt ; + HET_MEMORY memory ; +} PWCNT_INSTRUCTION; + + +/*---------------------------------------------*/ +/* WCAP INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct wcap_format +{ + uint32 : 8 ; + uint32 hr_lr : 1 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 interrupt_enable : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 : 2 ; + uint32 capture_condition : 2 ; + uint32 : 1 ; + uint32 pin_select : 5 ; + uint32 cond_addr : 9 ; + uint32 : 3 ; + uint32 previous_bit : 1 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + +} WCAP_FIELDS ; + +typedef union +{ + WCAP_FIELDS wcap ; + HET_MEMORY memory ; +} WCAP_INSTRUCTION; + +/*----------------------------------------------*/ +/* WCAPE INSTRUCTION */ +/*----------------------------------------------*/ +typedef struct wcape_format +{ + uint32 : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 interrupt_enable : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 : 2 ; + uint32 capture_condition : 2 ; + uint32 : 1 ; + uint32 pin_select : 5 ; + uint32 cond_addr : 9 ; + uint32 previous_bit : 1 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 ec_data : 7 ; + uint32 ts_data : 25 ; + +} WCAPE_FIELDS ; + +typedef union +{ + WCAPE_FIELDS wcape ; + HET_MEMORY memory ; +} WCAPE_INSTRUCTION; + + +/*---------------------------------------------*/ +/* BR INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct br_format +{ + uint32 : 9 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 interrupt_enable : 1 ; + uint32 : 2 ; + uint32 : 1 ; + uint32 : 1 ; + uint32 branch_condition : 3 ; + uint32 pin_select : 5 ; + uint32 cond_addr : 9 ; + uint32 : 3 ; + uint32 previous_bit : 1 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 hr_data : 7 ; + uint32 data : 25 ; + +} BR_FIELDS ; + +typedef union +{ + BR_FIELDS br ; + HET_MEMORY memory ; +} BR_INSTRUCTION; + + +/*---------------------------------------------*/ +/* SHFT INSTRUCTION */ +/*---------------------------------------------*/ +typedef struct shft_format +{ + uint32 shift_mode : 4 ; + uint32 : 5 ; + uint32 op_code : 4 ; + uint32 next_program_address : 9 ; + uint32 brk : 1 ; + uint32 reqnum : 3 ; + uint32 : 6 ; + + uint32 interrupt_enable : 1 ; + uint32 ab_register_select : 1 ; + uint32 t_register_select : 1 ; + uint32 : 2 ; + uint32 shift_condition : 2 ; + uint32 : 1 ; + uint32 pin_select : 5 ; + uint32 cond_addr : 9 ; + uint32 : 3 ; + uint32 previous_bit : 1 ; + uint32 auto_read_clear : 1 ; + uint32 request : 2 ; + uint32 : 3 ; + + uint32 : 7 ; + uint32 data : 25 ; + +} SHFT_FIELDS ; + +typedef union +{ + SHFT_FIELDS shft ; + HET_MEMORY memory ; +} SHFT_INSTRUCTION; + +#endif + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +#ifdef __cplusplus +} +#endif /*extern "C" */ + +#endif +/*--------------------------- End Of File ----------------------------------*/ diff --git a/include/arch/rm46l8lp/halcogen/sys_common.h b/include/arch/rm46l8lp/halcogen/sys_common.h new file mode 100644 index 0000000..2dd8f1d --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/sys_common.h @@ -0,0 +1,130 @@ +/** @file sys_common.h +* @brief Common Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - General Definitions +* . +* which are relevant for all drivers. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __SYS_COMMON_H__ +#define __SYS_COMMON_H__ + +#include "hal_stdtypes.h" + +#ifdef __cplusplus +extern "C" { +#endif +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/************************************************************/ +/* Type Definitions */ +/************************************************************/ + +#ifndef _TBOOLEAN_DECLARED +typedef boolean tBoolean; +#define _TBOOLEAN_DECLARED +#endif + +/** @enum loopBackType +* @brief Loopback type definition +*/ +/** @typedef loopBackType_t +* @brief Loopback type Type Definition +* +* This type is used to select the module Loopback type Digital or Analog loopback. +*/ +typedef enum loopBackType +{ + Digital_Lbk = 0U, + Analog_Lbk = 1U +}loopBackType_t; + +/** @enum config_value_type +* @brief config type definition +*/ +/** @typedef config_value_type_t +* @brief config type Type Definition +* +* This type is used to specify the Initial and Current value. +*/ +typedef enum config_value_type +{ + InitialValue, + CurrentValue +}config_value_type_t; + +#ifndef __little_endian__ +#define __little_endian__ 0 +#endif +#ifndef __LITTLE_ENDIAN__ +#define __LITTLE_ENDIAN__ 0 +#endif + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/********************************************************************************/ +/* The ASSERT macro, which does the actual assertion checking. Typically, this */ +/* will be for procedure arguments. */ +/********************************************************************************/ +#ifdef DEBUG +#define ASSERT(expr) { \ + if(!(expr)) \ + { \ + __error__(__FILE__, __LINE__); \ + } \ + } +#else +#define ASSERT(expr) +#endif + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +/* USER CODE BEGIN (3) */ +/* USER CODE END */ +#ifdef __cplusplus +} +#endif + + +#endif diff --git a/include/arch/rm46l8lp/halcogen/sys_core.h b/include/arch/rm46l8lp/halcogen/sys_core.h new file mode 100644 index 0000000..33077a7 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/sys_core.h @@ -0,0 +1,358 @@ +/** @file sys_core.h +* @brief System Core Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Core Interface Functions +* . +* which are relevant for the System driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __SYS_CORE_H__ +#define __SYS_CORE_H__ + +#include "sys_common.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/** @def USER_STACK_LENGTH +* @brief USER Mode Stack length (in bytes) +* +* Alias for USER Mode Stack length (in bytes) +* +* @note: Use this macro for USER Mode Stack length (in bytes) +*/ +#define USER_STACK_LENGTH 0x00001000U + +/** @def SVC_STACK_LENGTH +* @brief SVC Mode Stack length (in bytes) +* +* Alias for SVC Mode Stack length (in bytes) +* +* @note: Use this macro for SVC Mode Stack length (in bytes) +*/ +#define SVC_STACK_LENGTH 0x00000100U + +/** @def FIQ_STACK_LENGTH +* @brief FIQ Mode Stack length (in bytes) +* +* Alias for FIQ Mode Stack length (in bytes) +* +* @note: Use this macro for FIQ Mode Stack length (in bytes) +*/ +#define FIQ_STACK_LENGTH 0x00000100U + +/** @def IRQ_STACK_LENGTH +* @brief IRQ Mode Stack length (in bytes) +* +* Alias for IRQ Mode Stack length (in bytes) +* +* @note: Use this macro for IRQ Mode Stack length (in bytes) +*/ +#define IRQ_STACK_LENGTH 0x00000200U + +/** @def ABORT_STACK_LENGTH +* @brief ABORT Mode Stack length (in bytes) +* +* Alias for ABORT Mode Stack length (in bytes) +* +* @note: Use this macro for ABORT Mode Stack length (in bytes) +*/ +#define ABORT_STACK_LENGTH 0x00000100U + +/** @def UNDEF_STACK_LENGTH +* @brief UNDEF Mode Stack length (in bytes) +* +* Alias for UNDEF Mode Stack length (in bytes) +* +* @note: Use this macro for UNDEF Mode Stack length (in bytes) +*/ +#define UNDEF_STACK_LENGTH 0x00000100U + +/* System Core Interface Functions */ + +/** @fn void _coreInitRegisters_(void) +* @brief Initialize Core register +*/ +void _coreInitRegisters_(void); + +/** @fn void _coreInitStackPointer_(void) +* @brief Initialize Core stack pointer +*/ +void _coreInitStackPointer_(void); + +/** @fn void _getCPSRValue_(void) +* @brief Get CPSR Value +*/ +uint32 _getCPSRValue_(void); + +/** @fn void _gotoCPUIdle_(void) +* @brief Take CPU to Idle state +*/ +void _gotoCPUIdle_(void); + +/** @fn void _coreEnableIrqVicOffset_(void) +* @brief Enable Irq offset propagation via Vic controller +*/ +void _coreEnableIrqVicOffset_(void); + +/** @fn void _coreEnableVfp_(void) +* @brief Enable vector floating point unit +*/ +void _coreEnableVfp_(void); + +/** @fn void _coreEnableEventBusExport_(void) +* @brief Enable event bus export for external monitoring modules +* @note It is required to enable event bus export to process ecc issues. +* +* This function enables event bus exports to external monitoring modules +* like tightly coupled RAM wrapper, Flash wrapper and error signaling module. +*/ +void _coreEnableEventBusExport_(void); + +/** @fn void _coreDisableEventBusExport_(void) +* @brief Disable event bus export for external monitoring modules +* +* This function disables event bus exports to external monitoring modules +* like tightly coupled RAM wrapper, Flash wrapper and error signaling module. +*/ +void _coreDisableEventBusExport_(void); + +/** @fn void _coreEnableRamEcc_(void) +* @brief Enable external ecc error for RAM odd and even bank +* @note It is required to enable event bus export to process ecc issues. +*/ +void _coreEnableRamEcc_(void); + +/** @fn void _coreDisableRamEcc_(void) +* @brief Disable external ecc error for RAM odd and even bank +*/ +void _coreDisableRamEcc_(void); + +/** @fn void _coreEnableFlashEcc_(void) +* @brief Enable external ecc error for the Flash +* @note It is required to enable event bus export to process ecc issues. +*/ +void _coreEnableFlashEcc_(void); + +/** @fn void _coreDisableFlashEcc_(void) +* @brief Disable external ecc error for the Flash +*/ +void _coreDisableFlashEcc_(void); + +/** @fn uint32 _coreGetDataFault_(void) +* @brief Get core data fault status register +* @return The function will return the data fault status register value: +* - bit [10,3..0]: +* - 0b00001: Alignment -> address is valid +* - 0b00000: Background -> address is valid +* - 0b01101: Permission -> address is valid +* - 0b01000: Precise External Abort -> address is valid +* - 0b10110: Imprecise External Abort -> address is unpredictable +* - 0b11001: Precise ECC Error -> address is valid +* - 0b11000: Imprecise ECC Error -> address is unpredictable +* - 0b00010: Debug -> address is unchanged +* - bit [11]: +* - 0: Read +* - 1: Write +* - bit [12]: +* - 0: AXI Decode Error (DECERR) +* - 1: AXI Slave Error (SLVERR) +*/ +uint32 _coreGetDataFault_(void); + +/** @fn void _coreClearDataFault_(void) +* @brief Clear core data fault status register +*/ +void _coreClearDataFault_(void); + +/** @fn uint32 _coreGetInstructionFault_(void) +* @brief Get core instruction fault status register +* @return The function will return the instruction fault status register value: +* - bit [10,3..0]: +* - 0b00001: Alignment -> address is valid +* - 0b00000: Background -> address is valid +* - 0b01101: Permission -> address is valid +* - 0b01000: Precise External Abort -> address is valid +* - 0b10110: Imprecise External Abort -> address is unpredictable +* - 0b11001: Precise ECC Error -> address is valid +* - 0b11000: Imprecise ECC Error -> address is unpredictable +* - 0b00010: Debug -> address is unchanged +* - bit [12]: +* - 0: AXI Decode Error (DECERR) +* - 1: AXI Slave Error (SLVERR) +*/ +uint32 _coreGetInstructionFault_(void); + +/** @fn void _coreClearInstructionFault_(void) +* @brief Clear core instruction fault status register +*/ +void _coreClearInstructionFault_(void); + +/** @fn uint32 _coreGetDataFaultAddress_(void) +* @brief Get core data fault address register +* @return The function will return the data fault address: +*/ +uint32 _coreGetDataFaultAddress_(void); + +/** @fn void _coreClearDataFaultAddress_(void) +* @brief Clear core data fault address register +*/ +void _coreClearDataFaultAddress_(void); + +/** @fn uint32 _coreGetInstructionFaultAddress_(void) +* @brief Get core instruction fault address register +* @return The function will return the instruction fault address: +*/ +uint32 _coreGetInstructionFaultAddress_(void); + +/** @fn void _coreClearInstructionFaultAddress_(void) +* @brief Clear core instruction fault address register +*/ +void _coreClearInstructionFaultAddress_(void); + +/** @fn uint32 _coreGetAuxiliaryDataFault_(void) +* @brief Get core auxiliary data fault status register +* @return The function will return the auxiliary data fault status register value: +* - bit [13..5]: +* - Index value for access giving error +* - bit [21]: +* - 0: Unrecoverable error +* - 1: Recoverable error +* - bit [23..22]: +* - 0: Side cache +* - 1: Side ATCM (Flash) +* - 2: Side BTCM (RAM) +* - 3: Reserved +* - bit [27..24]: +* - Cache way or way in which error occurred +*/ +uint32 _coreGetAuxiliaryDataFault_(void); + +/** @fn void _coreClearAuxiliaryDataFault_(void) +* @brief Clear core auxiliary data fault status register +*/ +void _coreClearAuxiliaryDataFault_(void); + +/** @fn uint32 _coreGetAuxiliaryInstructionFault_(void) +* @brief Get core auxiliary instruction fault status register +* @return The function will return the auxiliary instruction fault status register value: +* - bit [13..5]: +* - Index value for access giving error +* - bit [21]: +* - 0: Unrecoverable error +* - 1: Recoverable error +* - bit [23..22]: +* - 0: Side cache +* - 1: Side ATCM (Flash) +* - 2: Side BTCM (RAM) +* - 3: Reserved +* - bit [27..24]: +* - Cache way or way in which error occurred +*/ +uint32 _coreGetAuxiliaryInstructionFault_(void); + +/** @fn void _coreClearAuxiliaryInstructionFault_(void) +* @brief Clear core auxiliary instruction fault status register +*/ +void _coreClearAuxiliaryInstructionFault_(void); + +/** @fn void _disable_interrupt_(void) +* @brief Disable IRQ and FIQ Interrupt mode in CPSR register +* +* This function disables IRQ and FIQ Interrupt mode in CPSR register. +*/ +void _disable_interrupt_(void); + +/** @fn void _disable_IRQ_interrupt_(void) +* @brief Disable IRQ Interrupt mode in CPSR register +* +* This function disables IRQ Interrupt mode in CPSR register. +*/ +void _disable_IRQ_interrupt_(void); + +/** @fn void _disable_FIQ_interrupt_(void) +* @brief Disable FIQ Interrupt mode in CPSR register +* +* This function disables IRQ Interrupt mode in CPSR register. +*/ +void _disable_FIQ_interrupt_(void); + +/** @fn void _enable_interrupt_(void) +* @brief Enable IRQ and FIQ Interrupt mode in CPSR register +* +* This function Enables IRQ and FIQ Interrupt mode in CPSR register. +* User must call this function to enable Interrupts in non-OS environments. +*/ +void _enable_interrupt_(void); + +/** @fn void _esmCcmErrorsClear_(void) +* @brief Clears ESM Error caused due to CCM Errata in RevA Silicon +* +* This function Clears ESM Error caused due to CCM Errata +* in RevA Silicon immediately after powerup. +*/ +void _esmCcmErrorsClear_(void); + +/** @fn void _errata_CORTEXR4_66_(void) +* @brief Work Around for Errata CORTEX-R4#66 +* +* This function Disable out-of-order completion for divide +* instructions in Auxiliary Control register. +*/ +void _errata_CORTEXR4_66_(void); + +/** @fn void _errata_CORTEXR4_57_(void) +* @brief Work Around for Errata CORTEX-R4#57 +* +* Disable out-of-order single-precision floating point +* multiply-accumulate instruction completion. +*/ +void _errata_CORTEXR4_57_(void); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/include/arch/rm46l8lp/halcogen/sys_dma.h b/include/arch/rm46l8lp/halcogen/sys_dma.h new file mode 100644 index 0000000..813806a --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/sys_dma.h @@ -0,0 +1,367 @@ +/** @file dma.h +* @brief DMA Driver Definition File +* @date 11-Dec-2018 +* @version 04.07.01 +* +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __DMA_H__ +#define __DMA_H__ + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +#include "reg_dma.h" + +#ifdef __cplusplus +extern "C" { +#endif +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/** @def BLOCK_TRANSFER +* @brief Alias name for DMA Block transfer +* @note This value should be used while setting the DMA control packet +*/ +#define BLOCK_TRANSFER 1U + +/** @def FRAME_TRANSFER +* @brief Alias name for DMA Frame transfer +* @note This value should be used while setting the DMA control packet +*/ +#define FRAME_TRANSFER 0U + +/** @def AUTOINIT_ON +* @brief Alias name for Auto Initialization ON +* @note This value should be used while setting the DMA control packet +*/ +#define AUTOINIT_ON 1U + +/** @def AUTOINIT_OFF +* @brief Alias name for Auto Initialization OFF +* @note This value should be used while setting the DMA control packet +*/ +#define AUTOINIT_OFF 0U + +/** @def ADDR_FIXED +* @brief Alias name for Fixed Addressing mode +* @note This value should be used while setting the DMA control packet +*/ +#define ADDR_FIXED 0U + +/** @def ADDR_INC1 +* @brief Alias name for Post-increment Addressing mode +* @note This value should be used while setting the DMA control packet +*/ +#define ADDR_INC1 1U + +/** @def ADDR_OFFSET +* @brief Alias name for Offset Addressing mode +* @note This value should be used while setting the DMA control packet +*/ +#define ADDR_OFFSET 3U + +/** @def INTERRUPT_ENABLE +* @brief Alias name for Interrupt enable +* @note @note This value should be used for API argument @a intenable +*/ +#define INTERRUPT_ENABLE 1U + +/** @def INTERRUPT_DISABLE +* @brief Alias name for Interrupt disable +* @note @note This value should be used for API argument @a intenable +*/ +#define INTERRUPT_DISABLE 0U + + +/** @def DMA_GCTRL_BUSBUSY +* @brief Bit mask for BUS BUSY in GCTRL Register +* @note @note This value should be used for API argument @a intenable +*/ +#define DMA_GCTRL_BUSBUSY (0x00004000U) + +/** @enum dmaREQTYPE +* @brief DMA TRANSFER Type definitions +* +* Used to define DMA transfer type +*/ +enum dmaREQTYPE +{ + DMA_HW = 0x0U, /**< Hardware trigger */ + DMA_SW = 0x1U /**< Software trigger */ +}; + + +/** @enum dmaCHANNEL +* @brief DMA CHANNEL definitions +* +* Used to define DMA Channel Number +*/ +enum dmaCHANNEL +{ + DMA_CH0 = 0x00U, + DMA_CH1 = 0x01U, + DMA_CH2 = 0x02U, + DMA_CH3 = 0x03U, + DMA_CH4 = 0x04U, + DMA_CH5 = 0x05U, + DMA_CH6 = 0x06U, + DMA_CH7 = 0x07U, + DMA_CH8 = 0x08U, + DMA_CH9 = 0x09U, + DMA_CH10 = 0x0AU, + DMA_CH11 = 0x0BU, + DMA_CH12 = 0x0CU, + DMA_CH13 = 0x0DU, + DMA_CH14 = 0x0EU, + DMA_CH15 = 0x0FU, + DMA_CH16 = 0x10U, + DMA_CH17 = 0x11U, + DMA_CH18 = 0x12U, + DMA_CH19 = 0x13U, + DMA_CH20 = 0x14U, + DMA_CH21 = 0x15U, + DMA_CH22 = 0x16U, + DMA_CH23 = 0x17U, + DMA_CH24 = 0x18U, + DMA_CH25 = 0x19U, + DMA_CH26 = 0x1AU, + DMA_CH27 = 0x1BU, + DMA_CH28 = 0x1CU, + DMA_CH29 = 0x1DU, + DMA_CH30 = 0x1EU, + DMA_CH31 = 0x1FU +}; + +/** @enum dmaACCESS +* @brief DMA ACESS WIDTH definitions +* +* Used to define DMA access width +*/ +typedef enum dmaACCESS +{ + ACCESS_8_BIT = 0U, + ACCESS_16_BIT = 1U, + ACCESS_32_BIT = 2U, + ACCESS_64_BIT = 3U +}dmaACCESS_t; + + +/** @enum dmaPRIORITY +* @brief DMA Channel Priority +* +* Used to define to which priority queue a DMA channel is assigned to +*/ +typedef enum dmaPRIORITY +{ + LOWPRIORITY = 0U, + HIGHPRIORITY = 1U +}dmaPRIORITY_t; + + +/** @enum dmaREGION +* @brief DMA Memory Protection Region +* +* Used to define DMA Memory Protection Region +*/ +typedef enum dmaREGION +{ + DMA_REGION0 = 0U, + DMA_REGION1 = 1U, + DMA_REGION2 = 2U, + DMA_REGION3 = 3U +}dmaREGION_t; + + +/** @enum dmaRegionAccess +* @brief DMA Memory Protection Region Access +* +* Used to define access permission of DMA memory protection regions +*/ +typedef enum dmaRegionAccess +{ + FULLACCESS = 0U, + READONLY = 1U, + WRITEONLY = 2U, + NOACCESS = 3U +}dmaRegionAccess_t; + + +/** @enum dmaInterrupt +* @brief DMA Interrupt +* +* Used to define DMA interrupts +*/ +typedef enum dmaInterrupt +{ + FTC = 1U, /**< Frame transfer complete Interrupt */ + LFS = 2U, /**< Last frame transfer started Interrupt */ + HBC = 3U, /**< First half of block complete Interrupt */ + BTC = 4U /**< Block transfer complete Interrupt */ +}dmaInterrupt_t; + +/** @struct g_dmaCTRL +* @brief Interrupt mode globals +* +*/ +typedef struct dmaCTRLPKT +{ + uint32 SADD; /* initial source address */ + uint32 DADD; /* initial destination address */ + uint32 CHCTRL; /* next ctrl packet to be trigger + 1 */ + uint32 FRCNT; /* frame count */ + uint32 ELCNT; /* element count */ + uint32 ELDOFFSET; /* element destination offset */ + uint32 ELSOFFSET; /* element source offset */ + uint32 FRDOFFSET; /* frame detination offset */ + uint32 FRSOFFSET; /* frame source offset */ + uint32 PORTASGN; /* dma port */ + uint32 RDSIZE; /* read element size */ + uint32 WRSIZE; /* write element size */ + uint32 TTYPE; /* trigger type - frame/block */ + uint32 ADDMODERD; /* addresssing mode for source */ + uint32 ADDMODEWR; /* addresssing mode for destination */ + uint32 AUTOINIT; /* auto-init mode */ + uint32 COMBO; /* next ctrl packet trigger(Not used) */ +} g_dmaCTRL; + +typedef volatile struct +{ + + struct /* 0x000-0x400 */ + { + uint32 ISADDR; + uint32 IDADDR; + uint32 ITCOUNT; + uint32 rsvd1; + uint32 CHCTRL; + uint32 EIOFF; + uint32 FIOFF; + uint32 rsvd2; + }PCP[32U]; + + struct /* 0x400-0x800 */ + { + uint32 res[256U]; + } RESERVED; + + struct /* 0x800-0xA00 */ + { + uint32 CSADDR; + uint32 CDADDR; + uint32 CTCOUNT; + uint32 rsvd3; + }WCP[32U]; + +} dmaRAMBASE_t; + +#define dmaRAMREG ((dmaRAMBASE_t *)0xFFF80000U) + +typedef struct dma_config_reg +{ + uint32 CONFIG_CHPRIOS; + uint32 CONFIG_GCHIENAS; + uint32 CONFIG_DREQASI[8U]; + uint32 CONFIG_FTCINTENAS; + uint32 CONFIG_LFSINTENAS; + uint32 CONFIG_HBCINTENAS; + uint32 CONFIG_BTCINTENAS; + uint32 CONFIG_DMAPCR; + uint32 CONFIG_DMAMPCTRL; +} dma_config_reg_t; + + +/** + * @defgroup DMA DMA + * @brief Direct Memory Access Controller + * + * The DMA controller is used to transfer data between two locations in the memory map in the background + * of CPU operations. Typically, the DMA is used to: + * - Transfer blocks of data between external and internal data memories + * - Restructure portions of internal data memory + * - Continually service a peripheral + * - Page program sections to internal program memory + * + * Related files: + * - reg_dma.h + * - sys_dma.h + * - sys_dma.c + * + * @addtogroup DMA + * @{ + */ +/* DMA Interface Functions */ +void dmaEnable(void); +void dmaDisable(void); +void dmaSetCtrlPacket(uint32 channel, g_dmaCTRL g_dmaCTRLPKT); +void dmaSetChEnable(uint32 channel,uint32 type); +void dmaReqAssign(uint32 channel,uint32 reqline); +uint32 dmaGetReq(uint32 channel); +void dmaSetPriority(uint32 channel, dmaPRIORITY_t priority); +void dmaEnableInterrupt(uint32 channel, dmaInterrupt_t inttype); +void dmaDisableInterrupt(uint32 channel, dmaInterrupt_t inttype); +void dmaDefineRegion(dmaREGION_t region, uint32 start_add, uint32 end_add); +void dmaEnableRegion(dmaREGION_t region, dmaRegionAccess_t access, boolean intenable); +void dmaDisableRegion(dmaREGION_t region); +void dmaEnableParityCheck(void); +void dmaDisableParityCheck(void); +void dmaGetConfigValue(dma_config_reg_t *config_reg, config_value_type_t type); + +/** @fn void dmaGroupANotification(dmaInterrupt_t inttype, uint32 channel) +* @brief Interrupt callback +* @param[in] inttype Interrupt type +* - FTC +* - LFS +* - HBC +* - BTC +* @param[in] channel channel number 0..15 +* This is a callback that is provided by the application and is called apon +* an interrupt. The parameter passed to the callback is a copy of the +* interrupt flag register. +*/ +void dmaGroupANotification(dmaInterrupt_t inttype, uint32 channel); + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +/**@}*/ +#ifdef __cplusplus +} +#endif + +#endif diff --git a/include/arch/rm46l8lp/halcogen/sys_mpu.h b/include/arch/rm46l8lp/halcogen/sys_mpu.h new file mode 100644 index 0000000..d8c7e82 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/sys_mpu.h @@ -0,0 +1,517 @@ +/** @file sys_mpu.h +* @brief System Mpu Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Mpu Interface Functions +* . +* which are relevant for the memory protection unit driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __SYS_MPU_H__ +#define __SYS_MPU_H__ + +#include "sys_common.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/** @def mpuREGION1 +* @brief Mpu region 1 +* +* Alias for Mpu region 1 +*/ +#define mpuREGION1 0U + +/** @def mpuREGION2 +* @brief Mpu region 2 +* +* Alias for Mpu region 1 +*/ +#define mpuREGION2 1U + +/** @def mpuREGION3 +* @brief Mpu region 3 +* +* Alias for Mpu region 3 +*/ +#define mpuREGION3 2U + +/** @def mpuREGION4 +* @brief Mpu region 4 +* +* Alias for Mpu region 4 +*/ +#define mpuREGION4 3U + +/** @def mpuREGION5 +* @brief Mpu region 5 +* +* Alias for Mpu region 5 +*/ +#define mpuREGION5 4U + +/** @def mpuREGION6 +* @brief Mpu region 6 +* +* Alias for Mpu region 6 +*/ +#define mpuREGION6 5U + +/** @def mpuREGION7 +* @brief Mpu region 7 +* +* Alias for Mpu region 7 +*/ +#define mpuREGION7 6U + +/** @def mpuREGION8 +* @brief Mpu region 8 +* +* Alias for Mpu region 8 +*/ +#define mpuREGION8 7U + +/** @def mpuREGION9 +* @brief Mpu region 9 +* +* Alias for Mpu region 9 +*/ +#define mpuREGION9 8U + +/** @def mpuREGION10 +* @brief Mpu region 10 +* +* Alias for Mpu region 10 +*/ +#define mpuREGION10 9U + +/** @def mpuREGION11 +* @brief Mpu region 11 +* +* Alias for Mpu region 11 +*/ +#define mpuREGION11 10U + +/** @def mpuREGION12 +* @brief Mpu region 12 +* +* Alias for Mpu region 12 +*/ +#define mpuREGION12 11U + +/** @def mpuREGION_ENABLE +* @brief Enable MPU Region +* +* Alias for MPU region enable. +* +* @note This should be used as the parameter of the API _mpuSetRegionSizeRegister_ +*/ +#define mpuREGION_ENABLE 1U + +/** @def mpuREGION_DISABLE +* @brief Disable MPU Region +* +* Alias for MPU region disable. +* +* @note This should be used as the parameter of the API _mpuSetRegionSizeRegister_ +*/ +#define mpuREGION_DISABLE 0U + +/** @def mpuSUBREGION0_DISABLE +* @brief Disable MPU Sub Region0 +* +* Alias for MPU subregion0 disable. +* +* @note This should be used as the parameter of the API _mpuSetRegionSizeRegister_ +*/ +#define mpuSUBREGION0_DISABLE 0x100U + +/** @def mpuSUBREGION1_DISABLE +* @brief Disable MPU Sub Region1 +* +* Alias for MPU subregion1 disable. +* +* @note This should be used as the parameter of the API _mpuSetRegionSizeRegister_ +*/ +#define mpuSUBREGION1_DISABLE 0x200U + +/** @def mpuSUBREGION2_DISABLE +* @brief Disable MPU Sub Region2 +* +* Alias for MPU subregion2 disable. +* +* @note This should be used as the parameter of the API _mpuSetRegionSizeRegister_ +*/ +#define mpuSUBREGION2_DISABLE 0x400U + +/** @def mpuSUBREGION3_DISABLE +* @brief Disable MPU Sub Region3 +* +* Alias for MPU subregion3 disable. +* +* @note This should be used as the parameter of the API _mpuSetRegionSizeRegister_ +*/ +#define mpuSUBREGION3_DISABLE 0x800U + +/** @def mpuSUBREGION4_DISABLE +* @brief Disable MPU Sub Region4 +* +* Alias for MPU subregion4 disable. +* +* @note This should be used as the parameter of the API _mpuSetRegionSizeRegister_ +*/ +#define mpuSUBREGION4_DISABLE 0x1000U + +/** @def mpuSUBREGION5_DISABLE +* @brief Disable MPU Sub Region5 +* +* Alias for MPU subregion5 disable. +* +* @note This should be used as the parameter of the API _mpuSetRegionSizeRegister_ +*/ +#define mpuSUBREGION5_DISABLE 0x2000U + +/** @def mpuSUBREGION6_DISABLE +* @brief Disable MPU Sub Region6 +* +* Alias for MPU subregion6 disable. +* +* @note This should be used as the parameter of the API _mpuSetRegionSizeRegister_ +*/ +#define mpuSUBREGION6_DISABLE 0x4000U + +/** @def mpuSUBREGION7_DISABLE +* @brief Disable MPU Sub Region7 +* +* Alias for MPU subregion7 disable. +* +* @note This should be used as the parameter of the API _mpuSetRegionSizeRegister_ +*/ +#define mpuSUBREGION7_DISABLE 0x8000U + + + +/** @enum mpuRegionAccessPermission +* @brief Alias names for mpu region access permissions +* +* This enumeration is used to provide alias names for the mpu region access permission: +* - MPU_PRIV_NA_USER_NA_EXEC no access in privileged mode, no access in user mode and execute +* - MPU_PRIV_RW_USER_NA_EXEC read/write in privileged mode, no access in user mode and execute +* - MPU_PRIV_RW_USER_RO_EXEC read/write in privileged mode, read only in user mode and execute +* - MPU_PRIV_RW_USER_RW_EXEC read/write in privileged mode, read/write in user mode and execute +* - MPU_PRIV_RO_USER_NA_EXEC read only in privileged mode, no access in user mode and execute +* - MPU_PRIV_RO_USER_RO_EXEC read only in privileged mode, read only in user mode and execute +* - MPU_PRIV_NA_USER_NA_NOEXEC no access in privileged mode, no access in user mode and no execution +* - MPU_PRIV_RW_USER_NA_NOEXEC read/write in privileged mode, no access in user mode and no execution +* - MPU_PRIV_RW_USER_RO_NOEXEC read/write in privileged mode, read only in user mode and no execution +* - MPU_PRIV_RW_USER_RW_NOEXEC read/write in privileged mode, read/write in user mode and no execution +* - MPU_PRIV_RO_USER_NA_NOEXEC read only in privileged mode, no access in user mode and no execution +* - MPU_PRIV_RO_USER_RO_NOEXEC read only in privileged mode, read only in user mode and no execution +* +*/ +enum mpuRegionAccessPermission +{ + MPU_PRIV_NA_USER_NA_EXEC = 0x0000U, /**< Alias no access in privileged mode, no access in user mode and execute */ + MPU_PRIV_RW_USER_NA_EXEC = 0x0100U, /**< Alias no read/write in privileged mode, no access in user mode and execute */ + MPU_PRIV_RW_USER_RO_EXEC = 0x0200U, /**< Alias no read/write in privileged mode, read only in user mode and execute */ + MPU_PRIV_RW_USER_RW_EXEC = 0x0300U, /**< Alias no read/write in privileged mode, read/write in user mode and execute */ + MPU_PRIV_RO_USER_NA_EXEC = 0x0500U, /**< Alias no read only in privileged mode, no access in user mode and execute */ + MPU_PRIV_RO_USER_RO_EXEC = 0x0600U, /**< Alias no read only in privileged mode, read only in user mode and execute */ + MPU_PRIV_NA_USER_NA_NOEXEC = 0x1000U, /**< Alias no access in privileged mode, no access in user mode and no execution */ + MPU_PRIV_RW_USER_NA_NOEXEC = 0x1100U, /**< Alias no read/write in privileged mode, no access in user mode and no execution */ + MPU_PRIV_RW_USER_RO_NOEXEC = 0x1200U, /**< Alias no read/write in privileged mode, read only in user mode and no execution */ + MPU_PRIV_RW_USER_RW_NOEXEC = 0x1300U, /**< Alias no read/write in privileged mode, read/write in user mode and no execution */ + MPU_PRIV_RO_USER_NA_NOEXEC = 0x1500U, /**< Alias no read only in privileged mode, no access in user mode and no execution */ + MPU_PRIV_RO_USER_RO_NOEXEC = 0x1600U /**< Alias no read only in privileged mode, read only in user mode and no execution */ +}; + +/** @enum mpuRegionType +* @brief Alias names for mpu region type +* +* This enumeration is used to provide alias names for the mpu region type: +* - MPU_STRONGLYORDERED_SHAREABLE Memory type strongly ordered and sharable +* - MPU_DEVICE_SHAREABLE Memory type device and sharable +* - MPU_NORMAL_OIWTNOWA_NONSHARED Memory type normal outer and inner write-through, no write allocate and non shared +* - MPU_NORMAL_OIWTNOWA_SHARED Memory type normal outer and inner write-through, no write allocate and shared +* - MPU_NORMAL_OIWBNOWA_NONSHARED Memory type normal outer and inner write-back, no write allocate and non shared +* - MPU_NORMAL_OIWBNOWA_SHARED Memory type normal outer and inner write-back, no write allocate and shared +* - MPU_NORMAL_OINC_NONSHARED Memory type normal outer and inner non-cachable and non shared +* - MPU_NORMAL_OINC_SHARED Memory type normal outer and inner non-cachable and shared +* - MPU_NORMAL_OIWBWA_NONSHARED Memory type normal outer and inner write-back, write allocate and non shared +* - MPU_NORMAL_OIWBWA_SHARED Memory type normal outer and inner write-back, write allocate and shared +* - MPU_DEVICE_NONSHAREABLE Memory type device and non sharable +*/ +enum mpuRegionType +{ + MPU_STRONGLYORDERED_SHAREABLE = 0x0000U, /**< Memory type strongly ordered and sharable */ + MPU_DEVICE_SHAREABLE = 0x0001U, /**< Memory type device and sharable */ + MPU_NORMAL_OIWTNOWA_NONSHARED = 0x0002U, /**< Memory type normal outer and inner write-through, no write allocate and non shared */ + MPU_NORMAL_OIWBNOWA_NONSHARED = 0x0003U, /**< Memory type normal outer and inner write-back, no write allocate and non shared */ + MPU_NORMAL_OIWTNOWA_SHARED = 0x0006U, /**< Memory type normal outer and inner write-through, no write allocate and shared */ + MPU_NORMAL_OIWBNOWA_SHARED = 0x0007U, /**< Memory type normal outer and inner write-back, no write allocate and shared */ + MPU_NORMAL_OINC_NONSHARED = 0x0008U, /**< Memory type normal outer and inner non-cachable and non shared */ + MPU_NORMAL_OIWBWA_NONSHARED = 0x000BU, /**< Memory type normal outer and inner write-back, write allocate and non shared */ + MPU_NORMAL_OINC_SHARED = 0x000CU, /**< Memory type normal outer and inner non-cachable and shared */ + MPU_NORMAL_OIWBWA_SHARED = 0x000FU, /**< Memory type normal outer and inner write-back, write allocate and shared */ + MPU_DEVICE_NONSHAREABLE = 0x0010U /**< Memory type device and non sharable */ +}; + +/** @enum mpuRegionSize +* @brief Alias names for mpu region type +* +* This enumeration is used to provide alias names for the mpu region type: +* - MPU_STRONGLYORDERED_SHAREABLE Memory type strongly ordered and sharable +* - MPU_32_BYTES Memory size in bytes +* - MPU_64_BYTES Memory size in bytes +* - MPU_128_BYTES Memory size in bytes +* - MPU_256_BYTES Memory size in bytes +* - MPU_512_BYTES Memory size in bytes +* - MPU_1_KB Memory size in kB +* - MPU_2_KB Memory size in kB +* - MPU_4_KB Memory size in kB +* - MPU_8_KB Memory size in kB +* - MPU_16_KB Memory size in kB +* - MPU_32_KB Memory size in kB +* - MPU_64_KB Memory size in kB +* - MPU_128_KB Memory size in kB +* - MPU_256_KB Memory size in kB +* - MPU_512_KB Memory size in kB +* - MPU_1_MB Memory size in MB +* - MPU_2_MB Memory size in MB +* - MPU_4_MB Memory size in MB +* - MPU_8_MBv Memory size in MB +* - MPU_16_MB Memory size in MB +* - MPU_32_MB Memory size in MB +* - MPU_64_MB Memory size in MB +* - MPU_128_MB Memory size in MB +* - MPU_256_MB Memory size in MB +* - MPU_512_MB Memory size in MB +* - MPU_1_GB Memory size in GB +* - MPU_2_GB Memory size in GB +* - MPU_4_GB Memory size in GB +*/ +enum mpuRegionSize +{ + MPU_32_BYTES = 0x04U << 1U, /**< Memory size in bytes */ + MPU_64_BYTES = 0x05U << 1U, /**< Memory size in bytes */ + MPU_128_BYTES = 0x06U << 1U, /**< Memory size in bytes */ + MPU_256_BYTES = 0x07U << 1U, /**< Memory size in bytes */ + MPU_512_BYTES = 0x08U << 1U, /**< Memory size in bytes */ + MPU_1_KB = 0x09U << 1U, /**< Memory size in kB */ + MPU_2_KB = 0x0AU << 1U, /**< Memory size in kB */ + MPU_4_KB = 0x0BU << 1U, /**< Memory size in kB */ + MPU_8_KB = 0x0CU << 1U, /**< Memory size in kB */ + MPU_16_KB = 0x0DU << 1U, /**< Memory size in kB */ + MPU_32_KB = 0x0EU << 1U, /**< Memory size in kB */ + MPU_64_KB = 0x0FU << 1U, /**< Memory size in kB */ + MPU_128_KB = 0x10U << 1U, /**< Memory size in kB */ + MPU_256_KB = 0x11U << 1U, /**< Memory size in kB */ + MPU_512_KB = 0x12U << 1U, /**< Memory size in kB */ + MPU_1_MB = 0x13U << 1U, /**< Memory size in MB */ + MPU_2_MB = 0x14U << 1U, /**< Memory size in MB */ + MPU_4_MB = 0x15U << 1U, /**< Memory size in MB */ + MPU_8_MB = 0x16U << 1U, /**< Memory size in MB */ + MPU_16_MB = 0x17U << 1U, /**< Memory size in MB */ + MPU_32_MB = 0x18U << 1U, /**< Memory size in MB */ + MPU_64_MB = 0x19U << 1U, /**< Memory size in MB */ + MPU_128_MB = 0x1AU << 1U, /**< Memory size in MB */ + MPU_256_MB = 0x1BU << 1U, /**< Memory size in MB */ + MPU_512_MB = 0x1CU << 1U, /**< Memory size in MB */ + MPU_1_GB = 0x1DU << 1U, /**< Memory size in GB */ + MPU_2_GB = 0x1EU << 1U, /**< Memory size in GB */ + MPU_4_GB = 0x1FU << 1U /**< Memory size in GB */ +}; + +/** @fn void _mpuInit_(void) +* @brief Initialize Mpu +* +* This function initializes memory protection unit. +*/ +void _mpuInit_(void); + +/** @fn void _mpuEnable_(void) +* @brief Enable Mpu +* +* This function enables memory protection unit. +*/ +void _mpuEnable_(void); + +/** @fn void _mpuDisable_(void) +* @brief Disable Mpu +* +* This function disables memory protection unit. +*/ +void _mpuDisable_(void); + +/** @fn void _mpuEnableBackgroundRegion_(void) +* @brief Enable Mpu background region +* +* This function enables background region of the memory protection unit. +*/ +void _mpuEnableBackgroundRegion_(void); + +/** @fn void _mpuDisableBackgroundRegion_(void) +* @brief Disable Mpu background region +* +* This function disables background region of the memory protection unit. +*/ +void _mpuDisableBackgroundRegion_(void); + +/** @fn uint32 _mpuGetNumberOfRegions_(void) +* @brief Returns number of implemented Mpu regions +* @return Number of implemented mpu regions +* +* This function returns the number of implemented mpu regions. +*/ +uint32 _mpuGetNumberOfRegions_(void); + +/** @fn uint32 _mpuAreRegionsSeparate_(void) +* @brief Returns the type of the implemented mpu regions +* @return Mpu type of regions +* +* This function returns 0 when mpu regions are of type unified otherwise regions are of type separate. +*/ +uint32 _mpuAreRegionsSeparate_(void); + +/** @fn void _mpuSetRegion_(uint32 region) +* @brief Set mpu region number +* @param[in] region Region number: mpuREGION1..mpuREGION12 +* +* This function selects one of the implemented mpu regions. +*/ +void _mpuSetRegion_(uint32 region); + +/** @fn uint32 _mpuGetRegion_(void) +* @brief Returns the currently selected mpu region +* @return Mpu region number +* +* This function returns currently selected mpu region number. +*/ +uint32 _mpuGetRegion_(void); + +/** @fn void _mpuSetRegionBaseAddress_(uint32 address) +* @brief Set base address of currently selected mpu region +* @param[in] address Base address of the MPU region +* @note The base address must always aligned with region size +* +* This function sets the base address of currently selected mpu region. +*/ +void _mpuSetRegionBaseAddress_(uint32 address); + +/** @fn uint32 _mpuGetRegionBaseAddress_(void) +* @brief Returns base address of currently selected mpu region +* @return Current base address of selected mpu region +* +* This function returns the base address of currently selected mpu region. +*/ +uint32 _mpuGetRegionBaseAddress_(void); + +/** @fn void _mpuSetRegionTypeAndPermission_(uint32 type, uint32 permission) +* @brief Set type of currently selected mpu region +* @param[in] type Region Type +* - MPU_STRONGLYORDERED_SHAREABLE : Memory type strongly ordered and sharable +* - MPU_DEVICE_SHAREABLE : Memory type device and sharable +* - MPU_NORMAL_OIWTNOWA_NONSHARED : Memory type normal outer and inner write-through, no write allocate and non shared +* - MPU_NORMAL_OIWBNOWA_NONSHARED : Memory type normal outer and inner write-back, no write allocate and non shared +* - MPU_NORMAL_OIWTNOWA_SHARED : Memory type normal outer and inner write-through, no write allocate and shared +* - MPU_NORMAL_OIWBNOWA_SHARED : Memory type normal outer and inner write-back, no write allocate and shared +* - MPU_NORMAL_OINC_NONSHARED : Memory type normal outer and inner non-cachable and non shared +* - MPU_NORMAL_OIWBWA_NONSHARED : Memory type normal outer and inner write-back, write allocate and non shared +* - MPU_NORMAL_OINC_SHARED : Memory type normal outer and inner non-cachable and shared +* - MPU_NORMAL_OIWBWA_SHARED : Memory type normal outer and inner write-back, write allocate and shared +* - MPU_DEVICE_NONSHAREABLE : Memory type device and non sharable +* +* @param[in] permission Region Access permission +* - MPU_PRIV_NA_USER_NA_EXEC : Alias no access in privileged mode, no access in user mode and execute +* - MPU_PRIV_RW_USER_NA_EXEC : Alias no read/write in privileged mode, no access in user mode and execute +* - MPU_PRIV_RW_USER_RO_EXEC : Alias no read/write in privileged mode, read only in user mode and execute +* - MPU_PRIV_RW_USER_RW_EXEC : Alias no read/write in privileged mode, read/write in user mode and execute +* - MPU_PRIV_RO_USER_NA_EXEC : Alias no read only in privileged mode, no access in user mode and execute +* - MPU_PRIV_RO_USER_RO_EXEC : Alias no read only in privileged mode, read only in user mode and execute +* - MPU_PRIV_NA_USER_NA_NOEXEC : Alias no access in privileged mode, no access in user mode and no execution +* - MPU_PRIV_RW_USER_NA_NOEXEC : Alias no read/write in privileged mode, no access in user mode and no execution +* - MPU_PRIV_RW_USER_RO_NOEXEC : Alias no read/write in privileged mode, read only in user mode and no execution +* - MPU_PRIV_RW_USER_RW_NOEXEC : Alias no read/write in privileged mode, read/write in user mode and no execution +* - MPU_PRIV_RO_USER_NA_NOEXEC : Alias no read only in privileged mode, no access in user mode and no execution +* - MPU_PRIV_RO_USER_RO_NOEXEC : Alias no read only in privileged mode, read only in user mode and no execution +* +* This function sets the type of currently selected mpu region. +*/ +void _mpuSetRegionTypeAndPermission_(uint32 type, uint32 permission); + +/** @fn uint32 _mpuGetRegionType_(void) +* @brief Returns the type of currently selected mpu region +* @return Current type of selected mpu region +* +* This function returns the type of currently selected mpu region. +*/ +uint32 _mpuGetRegionType_(void); + +/** @fn uint32 _mpuGetRegionPermission_(void) +* @brief Returns permission of currently selected mpu region +* @return Current type of selected mpu region +* +* This function returns permission of currently selected mpu region. +*/ +uint32 _mpuGetRegionPermission_(void); + +/** @fn void _mpuSetRegionSizeRegister_(uint32 value) +* @brief Set mpu region size register value +* @param[in] value Value to be written in the MPU Region Size and Enable register +* +* This function sets mpu region size register value. +* +* Sample usuage: +* _mpuSetRegion_(mpuREGION5); +* _mpuSetRegionSizeRegister_(mpuREGION_ENABLE | MPU_16_KB | mpuSUBREGION3_DISABLE | mpuSUBREGION4_DISABLE); +*/ +void _mpuSetRegionSizeRegister_(uint32 value); + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ +#ifdef __cplusplus +} +#endif + +#endif diff --git a/include/arch/rm46l8lp/halcogen/sys_pcr.h b/include/arch/rm46l8lp/halcogen/sys_pcr.h new file mode 100644 index 0000000..387e021 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/sys_pcr.h @@ -0,0 +1,297 @@ +/** @file sys_pcr.h +* @brief PCR Driver Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* . +* which are relevant for the System driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __SYS_PCR_H__ +#define __SYS_PCR_H__ + +#include "reg_pcr.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* PCR General Definitions */ + +typedef uint32 peripheralFrame_CS_t; + +#define PeripheralFrame_CS0 0U +#define PeripheralFrame_CS1 1U +#define PeripheralFrame_CS2 2U +#define PeripheralFrame_CS3 3U +#define PeripheralFrame_CS4 4U +#define PeripheralFrame_CS5 5U +#define PeripheralFrame_CS6 6U +#define PeripheralFrame_CS7 7U +#define PeripheralFrame_CS8 8U +#define PeripheralFrame_CS9 9U +#define PeripheralFrame_CS10 10U +#define PeripheralFrame_CS11 11U +#define PeripheralFrame_CS12 12U +#define PeripheralFrame_CS13 13U +#define PeripheralFrame_CS14 14U +#define PeripheralFrame_CS15 15U +#define PeripheralFrame_CS16 16U +#define PeripheralFrame_CS17 17U +#define PeripheralFrame_CS18 18U +#define PeripheralFrame_CS19 19U +#define PeripheralFrame_CS20 20U +#define PeripheralFrame_CS21 21U +#define PeripheralFrame_CS22 22U +#define PeripheralFrame_CS23 23U +#define PeripheralFrame_CS24 24U +#define PeripheralFrame_CS25 25U +#define PeripheralFrame_CS26 26U +#define PeripheralFrame_CS27 27U +#define PeripheralFrame_CS28 28U +#define PeripheralFrame_CS29 29U +#define PeripheralFrame_CS30 30U +#define PeripheralFrame_CS31 31U + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +typedef uint32 quadrant_Select_t; +#define Quadrant0 1U +#define Quadrant1 2U +#define Quadrant2 4U +#define Quadrant3 8U + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + +/** @typedef peripheral_Frame_Select_t +* @brief PCR Peripheral Frame Type Definition +* +* This type is used to access the PCR peripheral Frame configuration register. +*/ +typedef struct peripheral_Frame_Select +{ + peripheralFrame_CS_t Peripheral_CS; + quadrant_Select_t Peripheral_Quadrant; +}peripheral_Frame_Select_t; + +/* USER CODE BEGIN (3) */ +/* USER CODE END */ + +/** @typedef peripheral_Quad_ChipSelect_t +* @brief PCR Peripheral Frame registers Type Definition +* +* This type is used to access all the PCR peripheral Frame configuration registers. +*/ +typedef struct peripheral_Quad_ChipSelect +{ + uint32 Peripheral_Quad0_3_CS0_7; + uint32 Peripheral_Quad4_7_CS8_15; + uint32 Peripheral_Quad8_11_CS16_23; + uint32 Peripheral_Quad12_15_CS24_31; +}peripheral_Quad_ChipSelect_t; + +/* USER CODE BEGIN (4) */ +/* USER CODE END */ + +/** @typedef peripheral_Memory_ChipSelect_t +* @brief PCR Peripheral Memory Frame registers Type Definition +* +* This type is used to access all the PCR peripheral Memory Frame configuration registers. +*/ +typedef struct peripheral_Memory_ChipSelect +{ + uint32 Peripheral_Mem_CS0_31; + uint32 Peripheral_Mem_CS32_63; +}peripheral_Memory_ChipSelect_t; + +/* USER CODE BEGIN (5) */ +/* USER CODE END */ + +typedef uint32 peripheral_MemoryFrame_CS_t; + +#define PeripheralMemoryFrame_CS0 0U +#define PeripheralMemoryFrame_CS1 1U +#define PeripheralMemoryFrame_CS2 2U +#define PeripheralMemoryFrame_CS3 3U +#define PeripheralMemoryFrame_CS4 4U +#define PeripheralMemoryFrame_CS5 5U +#define PeripheralMemoryFrame_CS6 6U +#define PeripheralMemoryFrame_CS7 7U +#define PeripheralMemoryFrame_CS8 8U +#define PeripheralMemoryFrame_CS9 9U +#define PeripheralMemoryFrame_CS10 10U +#define PeripheralMemoryFrame_CS11 11U +#define PeripheralMemoryFrame_CS12 12U +#define PeripheralMemoryFrame_CS13 13U +#define PeripheralMemoryFrame_CS14 14U +#define PeripheralMemoryFrame_CS15 15U +#define PeripheralMemoryFrame_CS16 16U +#define PeripheralMemoryFrame_CS17 17U +#define PeripheralMemoryFrame_CS18 18U +#define PeripheralMemoryFrame_CS19 19U +#define PeripheralMemoryFrame_CS20 20U +#define PeripheralMemoryFrame_CS21 21U +#define PeripheralMemoryFrame_CS22 22U +#define PeripheralMemoryFrame_CS23 23U +#define PeripheralMemoryFrame_CS24 24U +#define PeripheralMemoryFrame_CS25 25U +#define PeripheralMemoryFrame_CS26 26U +#define PeripheralMemoryFrame_CS27 27U +#define PeripheralMemoryFrame_CS28 28U +#define PeripheralMemoryFrame_CS29 29U +#define PeripheralMemoryFrame_CS30 30U +#define PeripheralMemoryFrame_CS31 31U +#define PeripheralMemoryFrame_CS32 32U +#define PeripheralMemoryFrame_CS33 33U +#define PeripheralMemoryFrame_CS34 34U +#define PeripheralMemoryFrame_CS35 35U +#define PeripheralMemoryFrame_CS36 36U +#define PeripheralMemoryFrame_CS37 37U +#define PeripheralMemoryFrame_CS38 38U +#define PeripheralMemoryFrame_CS39 39U +#define PeripheralMemoryFrame_CS40 40U +#define PeripheralMemoryFrame_CS41 41U +#define PeripheralMemoryFrame_CS42 42U +#define PeripheralMemoryFrame_CS43 43U +#define PeripheralMemoryFrame_CS44 44U +#define PeripheralMemoryFrame_CS45 45U +#define PeripheralMemoryFrame_CS46 46U +#define PeripheralMemoryFrame_CS47 47U +#define PeripheralMemoryFrame_CS48 48U +#define PeripheralMemoryFrame_CS49 49U +#define PeripheralMemoryFrame_CS50 50U +#define PeripheralMemoryFrame_CS51 51U +#define PeripheralMemoryFrame_CS52 52U +#define PeripheralMemoryFrame_CS53 53U +#define PeripheralMemoryFrame_CS54 54U +#define PeripheralMemoryFrame_CS55 55U +#define PeripheralMemoryFrame_CS56 56U +#define PeripheralMemoryFrame_CS57 57U +#define PeripheralMemoryFrame_CS58 58U +#define PeripheralMemoryFrame_CS59 59U +#define PeripheralMemoryFrame_CS60 60U +#define PeripheralMemoryFrame_CS61 61U +#define PeripheralMemoryFrame_CS62 62U +#define PeripheralMemoryFrame_CS63 63U + +/* USER CODE BEGIN (6) */ +/* USER CODE END */ + +typedef struct pcr_config_reg +{ + uint32 CONFIG_PMPROTSET0; + uint32 CONFIG_PMPROTSET1; + uint32 CONFIG_PPROTSET0; + uint32 CONFIG_PPROTSET1; + uint32 CONFIG_PPROTSET2; + uint32 CONFIG_PPROTSET3; + uint32 CONFIG_PCSPWRDWNSET0; + uint32 CONFIG_PCSPWRDWNSET1; + uint32 CONFIG_PSPWRDWNSET0; + uint32 CONFIG_PSPWRDWNSET1; + uint32 CONFIG_PSPWRDWNSET2; + uint32 CONFIG_PSPWRDWNSET3; +} pcr_config_reg_t; + +/** + * @defgroup PCR PCR + * @brief Peripheral Central Resource Controller + * + * The PCR manages the accesses to the peripheral registers and peripheral + * memories. It provides a global reset for all the peripherals. It also supports the + * capability to selectively enable or disable the clock for each peripheral + * individually. The PCR also manages the accesses to the system module + * registers required to configure the device’s clocks, interrupts, and so on. The + * system module registers also include status flags for indicating exception + * conditions – resets, aborts, errors, interrupts. + * + * Related files: + * - reg_pcr.h + * - sys_pcr.h + * - sys_pcr.c + * + * @addtogroup PCR + * @{ + */ + +/* PCR Interface Functions */ + +void peripheral_Frame_Protection_Set(peripheral_Frame_Select_t peripheral_Frame); +void peripheral_Frame_Protection_Clr(peripheral_Frame_Select_t peripheral_Frame); +void peripheral_Frame_Powerdown_Set(peripheral_Frame_Select_t peripheral_Frame); +void peripheral_Frame_Powerdown_Clr(peripheral_Frame_Select_t peripheral_Frame); + +void peripheral_Protection_Set(peripheral_Quad_ChipSelect_t peripheral_Quad_CS); +void peripheral_Protection_Clr(peripheral_Quad_ChipSelect_t peripheral_Quad_CS); +void peripheral_Protection_Status(peripheral_Quad_ChipSelect_t* peripheral_Quad_CS); +void peripheral_Powerdown_Set(peripheral_Quad_ChipSelect_t peripheral_Quad_CS); +void peripheral_Powerdown_Clr(peripheral_Quad_ChipSelect_t peripheral_Quad_CS); +void peripheral_Powerdown_Status(peripheral_Quad_ChipSelect_t* peripheral_Quad_CS); + +void peripheral_Memory_Protection_Set(peripheral_Memory_ChipSelect_t peripheral_Memory_CS); +void peripheral_Memory_Protection_Clr(peripheral_Memory_ChipSelect_t peripheral_Memory_CS); +void peripheral_Memory_Protection_Status(peripheral_Memory_ChipSelect_t* peripheral_Memory_CS); +void peripheral_Memory_Powerdown_Set(peripheral_Memory_ChipSelect_t peripheral_Memory_CS); +void peripheral_Memory_Powerdown_Clr(peripheral_Memory_ChipSelect_t peripheral_Memory_CS); +void peripheral_Memory_Powerdown_Status(peripheral_Memory_ChipSelect_t* peripheral_Memory_CS); + +void peripheral_Mem_Frame_Prot_Set(peripheral_MemoryFrame_CS_t peripheral_Memory_Frame_CS); +void peripheral_Mem_Frame_Prot_Clr(peripheral_MemoryFrame_CS_t peripheral_Memory_Frame_CS); +void peripheral_Mem_Frame_Pwrdwn_Set(peripheral_MemoryFrame_CS_t peripheral_Memory_Frame_CS); +void peripheral_Mem_Frame_Pwrdwn_Clr (peripheral_MemoryFrame_CS_t peripheral_Memory_Frame_CS); + +void pcrGetConfigValue(pcr_config_reg_t *config_reg, config_value_type_t type); + +/**@}*/ +/* USER CODE BEGIN (7) */ +/* USER CODE END */ + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/include/arch/rm46l8lp/halcogen/sys_pmm.h b/include/arch/rm46l8lp/halcogen/sys_pmm.h new file mode 100644 index 0000000..f2c049e --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/sys_pmm.h @@ -0,0 +1,182 @@ +/** @file sys_pmm.h +* @brief PMM Driver Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* . +* which are relevant for the System driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __SYS_PMM_H__ +#define __SYS_PMM_H__ + +#include "reg_pmm.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Bit Masks */ +#define PMM_LOGICPDPWRCTRL0_LOGICPDON0 0x0F000000U /*PD2*/ +#define PMM_LOGICPDPWRCTRL0_LOGICPDON1 0x000F0000U /*PD3*/ +#define PMM_LOGICPDPWRCTRL0_LOGICPDON2 0x00000F00U /*PD4*/ +#define PMM_LOGICPDPWRCTRL0_LOGICPDON3 0x0000000FU /*PD5*/ + +#define PMM_MEMPDPWRCTRL0_MEMPDON0 0x0F000000U /*RAM_PD1*/ +#define PMM_MEMPDPWRCTRL0_MEMPDON1 0x000F0000U /*RAM_PD2*/ +#define PMM_MEMPDPWRCTRL0_MEMPDON2 0x00000F00U /*RAM_PD3*/ + +#define PMM_LOGICPDPWRSTAT_DOMAINON 0x00000100U +#define PMM_LOGICPDPWRSTAT_LOGICPDPWRSTAT 0x00000003U +#define PMM_MEMPDPWRSTAT_DOMAINON 0x00000100U +#define PMM_MEMPDPWRSTAT_MEMPDPWRSTAT 0x00000003U +#define PMM_GLOBALCTRL1_AUTOCLKWAKEENA 0x00000001U + +/* Configuration registers initial value */ +#define PMM_LOGICPDPWRCTRL0_CONFIGVALUE ( (uint32)((uint32)0x5U << 24U) \ + | (uint32)((uint32)0x5U << 16U) \ + | (uint32)((uint32)0x5U << 8U) \ + | (uint32)((uint32)0x5U << 0U) ) +#define PMM_MEMPDPWRCTRL0_CONFIGVALUE ( (uint32)((uint32)0x5U << 24U) \ + | (uint32)((uint32)0x5U << 16U) \ + ) + +#define PMM_PDCLKDISREG_CONFIGVALUE ( (uint32)((uint32)(1U-1U) << 0U) \ + | (uint32)((uint32)(1U-1U) << 1U) \ + | (uint32)((uint32)(1U-1U) << 2U) \ + | (uint32)((uint32)(1U-1U) << 3U) ) + +#define PMM_GLOBALCTRL1_CONFIGVALUE ( (uint32)((uint32)0U << 8U) \ + | (uint32)((uint32)0U << 0U)) + + +/** @enum pmmLogicPDTag +* @brief PMM Logic Power Domain +* +* Used to define PMM Logic Power Domain +*/ +typedef enum pmmLogicPDTag +{ + PMM_LOGICPD1 = 4U, /*-- NOT USED*/ + PMM_LOGICPD2 = 0U, + PMM_LOGICPD3 = 1U, + PMM_LOGICPD4 = 2U, + PMM_LOGICPD5 = 3U +}pmm_LogicPD_t; + + +/** @enum pmmMemPDTag +* @brief PMM Memory-Only Power Domain +* +* Used to define PMM Memory-Only Power Domain +*/ +typedef enum pmmMemPDTag +{ + PMM_MEMPD1 = 0U, + PMM_MEMPD2 = 1U, + PMM_MEMPD3 = 2U +}pmm_MemPD_t; + + +/** @enum pmmModeTag +* @brief PSCON operating mode +* +* Used to define the operating mode of PSCON Compare Block +*/ +typedef enum pmmModeTag +{ + LockStep = 0x0U, + SelfTest = 0x6U, + ErrorForcing = 0x9U, + SelfTestErrorForcing = 0xFU +}pmm_Mode_t; + + +typedef struct pmm_config_reg +{ + uint32 CONFIG_LOGICPDPWRCTRL0; + uint32 CONFIG_MEMPDPWRCTRL0; + uint32 CONFIG_PDCLKDISREG; + uint32 CONFIG_GLOBALCTRL1; +}pmm_config_reg_t; + +/** + * @defgroup PMM PMM + * @brief Power Management Module + * + * The PMM provides memory-mapped registers that control the states of the supported power domains. + * The PMM includes interfaces to the Power Mode Controller (PMC) and the Power State Controller (PSCON). + * The PMC and PSCON control the power up/down sequence of each power domain. + * + * Related files: + * - reg_pmm.h + * - sys_pmm.h + * - sys_pmm.c + * + * @addtogroup PMM + * @{ + */ + +/* Pmm Interface Functions */ +void pmmInit(void); +void pmmTurnONLogicPowerDomain(pmm_LogicPD_t logicPD); +void pmmTurnONMemPowerDomain(pmm_MemPD_t memPD); +void pmmTurnOFFLogicPowerDomain(pmm_LogicPD_t logicPD); +void pmmTurnOFFMemPowerDomain(pmm_MemPD_t memPD); +boolean pmmIsLogicPowerDomainActive(pmm_LogicPD_t logicPD); +boolean pmmIsMemPowerDomainActive(pmm_MemPD_t memPD); +void pmmGetConfigValue(pmm_config_reg_t *config_reg, config_value_type_t type); +void pmmSetMode(pmm_Mode_t mode); +boolean pmmPerformSelfTest(void); + +/**@}*/ +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +#ifdef __cplusplus +} +#endif /*extern "C" */ + +#endif + diff --git a/include/arch/rm46l8lp/halcogen/sys_pmu.h b/include/arch/rm46l8lp/halcogen/sys_pmu.h new file mode 100644 index 0000000..c2f4e5c --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/sys_pmu.h @@ -0,0 +1,241 @@ +/** @file sys_pmu.h +* @brief System Pmu Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Pmu Interface Functions +* . +* which are relevant for the performance monitor unit driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __SYS_PMU_H__ +#define __SYS_PMU_H__ + +#include "sys_common.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/** @def pmuCOUNTER0 +* @brief pmu event counter 0 mask +* +* Alias for pmu event counter 0 mask +* +* @note: Use this macro as a parameter 'counters' in APIs _pmuStartCounters_ and _pmuStopCounters_ +*/ +#define pmuCOUNTER0 0x00000001U + +/** @def pmuCOUNTER1 +* @brief pmu event counter 1 mask +* +* Alias for pmu event counter 1 mask +* +* @note: Use this macro as a parameter 'counters' in APIs _pmuStartCounters_ and _pmuStopCounters_ +*/ +#define pmuCOUNTER1 0x00000002U + +/** @def pmuCOUNTER2 +* @brief pmu event counter 2 mask +* +* Alias for pmu event counter 2 mask +* +* @note: Use this macro as a parameter 'counters' in APIs _pmuStartCounters_ and _pmuStopCounters_ +*/ +#define pmuCOUNTER2 0x00000004U + +/** @def pmuCYCLE_COUNTER +* @brief pmu cycle counter mask +* +* Alias for pmu event counter mask +* +* @note: Use this macro as a parameter 'counters' in APIs _pmuStartCounters_ and _pmuStopCounters_ +*/ +#define pmuCYCLE_COUNTER 0x80000000U + +/** @enum pmuEvent +* @brief pmu event +* +* Alias for pmu event counter increment source +*/ +enum pmuEvent +{ + PMU_INST_CACHE_MISS = 0x01U, + PMU_DATA_CACHE_MISS = 0x03U, + PMU_DATA_CACHE_ACCESS = 0x04U, + PMU_DATA_READ_ARCH_EXECUTED = 0x06U, + PMU_DATA_WRITE_ARCH_EXECUTED = 0x07U, + PMU_INST_ARCH_EXECUTED = 0x08U, + PMU_EXCEPTION_TAKEN = 0x09U, + PMU_EXCEPTION_RETURN_ARCH_EXECUTED = 0x0AU, + PMU_CHANGE_TO_CONTEXT_ID_EXECUTED = 0x0BU, + PMU_SW_CHANGE_OF_PC_ARCH_EXECUTED = 0x0CU, + PMU_BRANCH_IMM_INST_ARCH_EXECUTED = 0x0DU, + PMU_PROC_RETURN_ARCH_EXECUTED = 0x0EU, + PMU_UNALIGNED_ACCESS_ARCH_EXECUTED = 0x0FU, + PMU_BRANCH_MISSPREDICTED = 0x10U, + PMU_CYCLE_COUNT = 0x11U, + PMU_PREDICTABLE_BRANCHES = 0x12U, + PMU_INST_BUFFER_STALL = 0x40U, + PMU_DATA_DEPENDENCY_INST_STALL = 0x41U, + PMU_DATA_CACHE_WRITE_BACK = 0x42U, + PMU_EXT_MEMORY_REQUEST = 0x43U, + PMU_LSU_BUSY_STALL = 0x44U, + PMU_FORCED_DRAIN_OFSTORE_BUFFER = 0x45U, + PMU_FIQ_DISABLED_CYCLE_COUNT = 0x46U, + PMU_IRQ_DISABLED_CYCLE_COUNT = 0x47U, + PMU_ETMEXTOUT_0 = 0x48U, + PMU_ETMEXTOUT_1 = 0x49U, + PMU_INST_CACHE_TAG_ECC_ERROR = 0x4AU, + PMU_INST_CACHE_DATA_ECC_ERROR = 0x4BU, + PMU_DATA_CACHE_TAG_ECC_ERROR = 0x4CU, + PMU_DATA_CACHE_DATA_ECC_ERROR = 0x4DU, + PMU_TCM_FATAL_ECC_ERROR_PREFETCH = 0x4EU, + PMU_TCM_FATAL_ECC_ERROR_LOAD_STORE = 0x4FU, + PMU_STORE_BUFFER_MERGE = 0x50U, + PMU_LSU_STALL_STORE_BUFFER_FULL = 0x51U, + PMU_LSU_STALL_STORE_QUEUE_FULL = 0x52U, + PMU_INTEGER_DIV_EXECUTED = 0x53U, + PMU_STALL_INTEGER_DIV = 0x54U, + PMU_PLD_INST_LINE_FILL = 0x55U, + PMU_PLD_INST_NO_LINE_FILL = 0x56U, + PMU_NON_CACHEABLE_ACCESS_AXI_MASTER = 0x57U, + PMU_INST_CACHE_ACCESS = 0x58U, + PMU_DOUBLE_DATA_CACHE_ISSUE = 0x59U, + PMU_DUAL_ISSUE_CASE_A = 0x5AU, + PMU_DUAL_ISSUE_CASE_B1_B2_F2_F2D = 0x5BU, + PMU_DUAL_ISSUE_OTHER = 0x5CU, + PMU_DP_FLOAT_INST_EXCECUTED = 0x5DU, + PMU_DUAL_ISSUED_PAIR_INST_ARCH_EXECUTED = 0x5EU, + PMU_DATA_CACHE_DATA_FATAL_ECC_ERROR = 0x60U, + PMU_DATA_CACHE_TAG_FATAL_ECC_ERROR = 0x61U, + PMU_PROCESSOR_LIVE_LOCK = 0x62U, + PMU_ATCM_MULTI_BIT_ECC_ERROR = 0x64U, + PMU_B0TCM_MULTI_BIT_ECC_ERROR = 0x65U, + PMU_B1TCM_MULTI_BIT_ECC_ERROR = 0x66U, + PMU_ATCM_SINGLE_BIT_ECC_ERROR = 0x67U, + PMU_B0TCM_SINGLE_BIT_ECC_ERROR = 0x68U, + PMU_B1TCM_SINGLE_BIT_ECC_ERROR = 0x69U, + PMU_TCM_COR_ECC_ERROR_LOAD_STORE = 0x6AU, + PMU_TCM_COR_ECC_ERROR_PREFETCH = 0x6BU, + PMU_TCM_FATAL_ECC_ERROR_AXI_SLAVE = 0x6CU, + PMU_TCM_COR_ECC_ERROR_AXI_SLAVE = 0x6DU +}; + +/** @fn void _pmuInit_(void) +* @brief Initialize Performance Monitor Unit +*/ +void _pmuInit_(void); + +/** @fn void _pmuEnableCountersGlobal_(void) +* @brief Enable and reset cycle counter and all 3 event counters +*/ +void _pmuEnableCountersGlobal_(void); + +/** @fn void _pmuDisableCountersGlobal_(void) +* @brief Disable cycle counter and all 3 event counters +*/ +void _pmuDisableCountersGlobal_(void); + +/** @fn void _pmuResetCycleCounter_(void) +* @brief Reset cycle counter +*/ +void _pmuResetCycleCounter_(void); + +/** @fn void _pmuResetEventCounters_(void) +* @brief Reset event counters 0-2 +*/ +void _pmuResetEventCounters_(void); + +/** @fn void _pmuResetCounters_(void) +* @brief Reset cycle counter and event counters 0-2 +*/ +void _pmuResetCounters_(void); + +/** @fn void _pmuStartCounters_(uint32 counters) +* @brief Starts selected counters +* @param[in] counters - Counter mask +*/ +void _pmuStartCounters_(uint32 counters); + +/** @fn void _pmuStopCounters_(uint32 counters) +* @brief Stops selected counters +* @param[in] counters - Counter mask +*/ +void _pmuStopCounters_(uint32 counters); + +/** @fn void _pmuSetCountEvent_(uint32 counter, uint32 event) +* @brief Set event counter count event +* @param[in] counter - Counter select 0..2 +* @param[in] event - Count event +*/ +void _pmuSetCountEvent_(uint32 counter, uint32 event); + +/** @fn uint32 _pmuGetCycleCount_(void) +* @brief Returns current cycle counter value +* +* @return cycle count. +*/ +uint32 _pmuGetCycleCount_(void); + +/** @fn uint32 _pmuGetEventCount_(uint32 counter) +* @brief Returns current event counter value +* @param[in] counter - Counter select 0..2 +* +* @return event counter count. +*/ +uint32 _pmuGetEventCount_(uint32 counter); + +/** @fn uint32 _pmuGetOverflow_(void) +* @brief Returns current overflow register and clear flags +* +* @return overflow flags. +*/ +uint32 _pmuGetOverflow_(void); + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +#ifdef __cplusplus +} +#endif /*extern "C" */ +#endif diff --git a/include/arch/rm46l8lp/halcogen/sys_selftest.h b/include/arch/rm46l8lp/halcogen/sys_selftest.h new file mode 100644 index 0000000..fcdcfac --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/sys_selftest.h @@ -0,0 +1,471 @@ +/** @file sys_selftest.h +* @brief System Memory Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Efuse Self Test Functions +* . +* which are relevant for the System driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __sys_selftest_H__ +#define __sys_selftest_H__ + +#include "reg_pbist.h" +#include "reg_stc.h" +#include "reg_efc.h" +#include "sys_core.h" +#include "system.h" +#include "sys_vim.h" +#include "adc.h" +#include "can.h" +#include "mibspi.h" +#include "het.h" +#include "htu.h" +#include "esm.h" + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +#define flash1bitError (*(volatile uint32 *)(0xF00803F0U)) +#define flash2bitError (*(volatile uint32 *)(0xF00803F8U)) + +#define tcramA1bitError (*(volatile uint32 *)(0x08400000U)) +#define tcramA2bitError (*(volatile uint32 *)(0x08400010U)) + +#define tcramB1bitError (*(volatile uint32 *)(0x08400008U)) +#define tcramB2bitError (*(volatile uint32 *)(0x08400018U)) + +#define tcramA1bit (*(volatile uint64 *)(0x08000000U)) +#define tcramA2bit (*(volatile uint64 *)(0x08000010U)) + +#define tcramB1bit (*(volatile uint64 *)(0x08000008U)) +#define tcramB2bit (*(volatile uint64 *)(0x08000018U)) + +#define flashBadECC1 (*(volatile uint32 *)(0x20000000U)) +#define flashBadECC2 (*(volatile uint32 *)(0x20000010U)) + +#define CCMSR (*(volatile uint32 *)(0xFFFFF600U)) +#define CCMKEYR (*(volatile uint32 *)(0xFFFFF604U)) + +#define DMA_PARCR (*(volatile uint32 *)(0xFFFFF1A8U)) +#define DMA_PARADDR (*(volatile uint32 *)(0xFFFFF1ACU)) +#define DMARAMLOC (*(volatile uint32 *)(0xFFF80000U)) +#define DMARAMPARLOC (*(volatile uint32 *)(0xFFF80A00U)) + +#define MIBSPI1RAMLOC (*(volatile uint32 *)(0xFF0E0000U)) +#define MIBSPI3RAMLOC (*(volatile uint32 *)(0xFF0C0000U)) +#define MIBSPI5RAMLOC (*(volatile uint32 *)(0xFF0A0000U)) + + +#ifndef __PBIST_H__ +#define __PBIST_H__ + +/** @enum pbistPort +* @brief Alias names for pbist Port number +* +* This enumeration is used to provide alias names for the pbist Port number +* - PBIST_PORT0 +* - PBIST_PORT1 +* +* @note Check the datasheet for the port avaiability +*/ +enum pbistPort +{ + PBIST_PORT0 = 0U, /**< Alias for PBIST Port 0 */ + PBIST_PORT1 = 1U /**< Alias for PBIST Port 1 < Check datasheet for Port 1 availability > */ +}; +/** @enum pbistAlgo +* @brief Alias names for pbist Algorithm +* +* This enumeration is used to provide alias names for the pbist Algorithm +*/ +enum pbistAlgo +{ + PBIST_TripleReadSlow = 0x00000001U, /**>16U) +#define SYS_EXCEPTION (*(volatile uint32 *)0xFFFFFFE4U) + +#define POWERON_RESET 0x8000U +#define OSC_FAILURE_RESET 0x4000U +#define WATCHDOG_RESET 0x2000U +#define ICEPICK_RESET 0x2000U +#define CPU_RESET 0x0020U +#define SW_RESET 0x0010U + +#define WATCHDOG_STATUS (*(volatile uint32 *)0xFFFFFC98U) +#define DEVICE_ID_REV (*(volatile uint32 *)0xFFFFFFF0U) + +/** @def OSC_FREQ +* @brief Oscillator clock source exported from HALCoGen GUI +* +* Oscillator clock source exported from HALCoGen GUI +*/ +#define OSC_FREQ 16.0F + +/** @def PLL1_FREQ +* @brief PLL 1 clock source exported from HALCoGen GUI +* +* PLL 1 clock source exported from HALCoGen GUI +*/ +#define PLL1_FREQ 160.00F + +/** @def LPO_LF_FREQ +* @brief LPO Low Freq Oscillator source exported from HALCoGen GUI +* +* LPO Low Freq Oscillator source exported from HALCoGen GUI +*/ +#define LPO_LF_FREQ 0.080F + +/** @def LPO_HF_FREQ +* @brief LPO High Freq Oscillator source exported from HALCoGen GUI +* +* LPO High Freq Oscillator source exported from HALCoGen GUI +*/ +#define LPO_HF_FREQ 10.000F + +/** @def PLL1_FREQ +* @brief PLL 2 clock source exported from HALCoGen GUI +* +* PLL 2 clock source exported from HALCoGen GUI +*/ +#define PLL2_FREQ 160.00F + +/** @def GCLK_FREQ +* @brief GCLK domain frequency exported from HALCoGen GUI +* +* GCLK domain frequency exported from HALCoGen GUI +*/ +#define GCLK_FREQ 160.000F + +/** @def HCLK_FREQ +* @brief HCLK domain frequency exported from HALCoGen GUI +* +* HCLK domain frequency exported from HALCoGen GUI +*/ +#define HCLK_FREQ 160.000F + +/** @def RTI_FREQ +* @brief RTI Clock frequency exported from HALCoGen GUI +* +* RTI Clock frequency exported from HALCoGen GUI +*/ +#define RTI_FREQ 80.000F + +/** @def AVCLK1_FREQ +* @brief AVCLK1 Domain frequency exported from HALCoGen GUI +* +* AVCLK Domain frequency exported from HALCoGen GUI +*/ +#define AVCLK1_FREQ 80.000F + +/** @def AVCLK2_FREQ +* @brief AVCLK2 Domain frequency exported from HALCoGen GUI +* +* AVCLK2 Domain frequency exported from HALCoGen GUI +*/ +#define AVCLK2_FREQ 80.000F + +/** @def AVCLK3_FREQ +* @brief AVCLK3 Domain frequency exported from HALCoGen GUI +* +* AVCLK3 Domain frequency exported from HALCoGen GUI +*/ +#define AVCLK3_FREQ 0.000F + +/** @def AVCLK4_FREQ +* @brief AVCLK4 Domain frequency exported from HALCoGen GUI +* +* AVCLK4 Domain frequency exported from HALCoGen GUI +*/ +#define AVCLK4_FREQ 80.000F + +/** @def VCLK1_FREQ +* @brief VCLK1 Domain frequency exported from HALCoGen GUI +* +* VCLK1 Domain frequency exported from HALCoGen GUI +*/ +#define VCLK1_FREQ 80.000F + +/** @def VCLK2_FREQ +* @brief VCLK2 Domain frequency exported from HALCoGen GUI +* +* VCLK2 Domain frequency exported from HALCoGen GUI +*/ +#define VCLK2_FREQ 80.000F + +/** @def VCLK3_FREQ +* @brief VCLK3 Domain frequency exported from HALCoGen GUI +* +* VCLK3 Domain frequency exported from HALCoGen GUI +*/ +#define VCLK3_FREQ 80.000F + +/** @def VCLK4_FREQ +* @brief VCLK4 Domain frequency exported from HALCoGen GUI +* +* VCLK4 Domain frequency exported from HALCoGen GUI +*/ +#define VCLK4_FREQ 80.000F + + +/** @def SYS_PRE1 +* @brief Alias name for RTI1CLK PRE clock source +* +* This is an alias name for the RTI1CLK pre clock source. +* This can be either: +* - Oscillator +* - Pll +* - 32 kHz Oscillator +* - External +* - Low Power Oscillator Low +* - Low Power Oscillator High +* - Flexray Pll +*/ +/*SAFETYMCUSW 79 S MR:19.4 " Value comes from GUI drop down option " */ +#define SYS_PRE1 (SYS_PLL1) + +/** @def SYS_PRE2 +* @brief Alias name for RTI2CLK pre clock source +* +* This is an alias name for the RTI2CLK pre clock source. +* This can be either: +* - Oscillator +* - Pll +* - 32 kHz Oscillator +* - External +* - Low Power Oscillator Low +* - Low Power Oscillator High +* - Flexray Pll +*/ +/*SAFETYMCUSW 79 S MR:19.4 " Value comes from GUI drop down option " */ +#define SYS_PRE2 (SYS_PLL1) + +/* Configuration registers */ +typedef struct system_config_reg +{ + uint32 CONFIG_SYSPC1; + uint32 CONFIG_SYSPC2; + uint32 CONFIG_SYSPC7; + uint32 CONFIG_SYSPC8; + uint32 CONFIG_SYSPC9; + uint32 CONFIG_CSDIS; + uint32 CONFIG_CDDIS; + uint32 CONFIG_GHVSRC; + uint32 CONFIG_VCLKASRC; + uint32 CONFIG_RCLKSRC; + uint32 CONFIG_MSTGCR; + uint32 CONFIG_MINITGCR; + uint32 CONFIG_MSINENA; + uint32 CONFIG_PLLCTL1; + uint32 CONFIG_PLLCTL2; + uint32 CONFIG_UERFLAG; + uint32 CONFIG_LPOMONCTL; + uint32 CONFIG_CLKTEST; + uint32 CONFIG_DFTCTRLREG1; + uint32 CONFIG_DFTCTRLREG2; + uint32 CONFIG_GPREG1; + uint32 CONFIG_RAMGCR; + uint32 CONFIG_BMMCR1; + uint32 CONFIG_MMUGCR; + uint32 CONFIG_CLKCNTL; + uint32 CONFIG_ECPCNTL; + uint32 CONFIG_DEVCR1; + uint32 CONFIG_SYSECR; + uint32 CONFIG_PLLCTL3; + uint32 CONFIG_STCCLKDIV; + uint32 CONFIG_CLK2CNTL; + uint32 CONFIG_VCLKACON1; + uint32 CONFIG_CLKSLIP; + uint32 CONFIG_EFC_CTLEN; +} system_config_reg_t; + +/* Configuration registers initial value */ +#define SYS_SYSPC1_CONFIGVALUE 0U + +#define SYS_SYSPC2_CONFIGVALUE 1U + +#define SYS_SYSPC7_CONFIGVALUE 0U + +#define SYS_SYSPC8_CONFIGVALUE 0U + +#define SYS_SYSPC9_CONFIGVALUE 1U + +#define SYS_CSDIS_CONFIGVALUE ( 0x00000000U\ + | 0x00000000U \ + | 0x00000008U \ + | 0x00000080U \ + | 0x00000000U \ + | 0x00000000U \ + | 0x00000000U\ + | 0x4U ) + +#define SYS_CDDIS_CONFIGVALUE ( (uint32)((uint32)0U << 4U )\ + | (uint32)((uint32)0U << 5U )\ + | (uint32)((uint32)0U << 8U )\ + | (uint32)((uint32)0U << 9U )\ + | (uint32)((uint32)1U << 10U)\ + | (uint32)((uint32)0U << 11U) ) + +#define SYS_GHVSRC_CONFIGVALUE ( (uint32)((uint32)SYS_OSC << 24U) \ + | (uint32)((uint32)SYS_OSC << 16U) \ + | (uint32)((uint32)SYS_PLL1 << 0U) ) + +#define SYS_VCLKASRC_CONFIGVALUE ( (uint32)((uint32)SYS_VCLK << 8U)\ + | (uint32)((uint32)SYS_VCLK << 0U) ) + +#define SYS_RCLKSRC_CONFIGVALUE ( (uint32)((uint32)1U << 24U)\ + | (uint32)((uint32)SYS_VCLK << 16U)\ + | (uint32)((uint32)1U << 8U)\ + | (uint32)((uint32)SYS_VCLK << 0U) ) + +#define SYS_MSTGCR_CONFIGVALUE 0x00000105U + +#define SYS_MINITGCR_CONFIGVALUE 0x5U + +#define SYS_MSINENA_CONFIGVALUE 0U + +#define SYS_PLLCTL1_CONFIGVALUE_1 ( (uint32)0x00000000U \ + | (uint32)0x20000000U \ + | (uint32)((uint32)0x1FU << 24U) \ + | (uint32)0x00000000U \ + | (uint32)((uint32)(6U - 1U)<< 16U)\ + | (uint32)(0x7700U)) + +#define SYS_PLLCTL1_CONFIGVALUE_2 (((SYS_PLLCTL1_CONFIGVALUE_1) & 0xE0FFFFFFU) | (uint32)((uint32)(1U - 1U) << 24U)) + +#define SYS_PLLCTL2_CONFIGVALUE ( (uint32)0x00000000U\ + | (uint32)((uint32)255U << 22U)\ + | (uint32)((uint32)7U << 12U)\ + | (uint32)((uint32)(2U - 1U)<< 9U)\ + | (uint32)61U) + +#define SYS_UERFLAG_CONFIGVALUE 0U + +#define SYS_LPOMONCTL_CONFIGVALUE_1 ((uint32)((uint32)1U << 24U) | LPO_TRIM_VALUE) +#define SYS_LPOMONCTL_CONFIGVALUE_2 ((uint32)((uint32)1U << 24U) | (uint32)((uint32)16U << 8U) | 16U) + +#define SYS_CLKTEST_CONFIGVALUE 0x000A0000U + +#define SYS_DFTCTRLREG1_CONFIGVALUE 0x00002205U + +#define SYS_DFTCTRLREG2_CONFIGVALUE 0x5U + +#define SYS_GPREG1_CONFIGVALUE 0x0005FFFFU + +#define SYS_RAMGCR_CONFIGVALUE 0x00050000U + +#define SYS_BMMCR1_CONFIGVALUE 0xAU + +#define SYS_MMUGCR_CONFIGVALUE 0U + +#define SYS_CLKCNTL_CONFIGVALUE ( 0x00000100U \ + | (uint32)((uint32)1U << 16U) \ + | (uint32)((uint32)1U << 24U) ) + +#define SYS_ECPCNTL_CONFIGVALUE ( (uint32)((uint32)0U << 24U)\ + | (uint32)((uint32)0U << 23U)\ + | (uint32)((uint32)(8U - 1U) & 0xFFFFU) ) + +#define SYS_DEVCR1_CONFIGVALUE 0xAU + +#define SYS_SYSECR_CONFIGVALUE 0x00004000U +#define SYS2_PLLCTL3_CONFIGVALUE_1 ( (uint32)((uint32)(2U - 1U) << 29U)\ + | (uint32)((uint32)0x1FU << 24U) \ + | (uint32)((uint32)(6U - 1U)<< 16U) \ + | (uint32)(0x7700U)) + +#define SYS2_PLLCTL3_CONFIGVALUE_2 (((SYS2_PLLCTL3_CONFIGVALUE_1) & 0xE0FFFFFFU) | (uint32)((uint32)(1U - 1U) << 24U)) +#define SYS2_STCCLKDIV_CONFIGVALUE 0U +#define SYS2_CLK2CNTL_CONFIGVALUE (1U | 0x00000100U) +#define SYS2_VCLKACON1_CONFIGVALUE ( (uint32)((uint32)1U << 24U) \ + | (uint32)((uint32)1U << 20U) \ + | (uint32)((uint32)SYS_VCLK << 16U)\ + | (uint32)((uint32)1U << 8U)\ + | (uint32)((uint32)1U << 4U) \ + | (uint32)((uint32)SYS_VCLK << 0U) ) +#define SYS2_CLKSLIP_CONFIGVALUE 0x5U +#define SYS2_EFC_CTLEN_CONFIGVALUE 0x5U + +void systemGetConfigValue(system_config_reg_t *config_reg, config_value_type_t type); + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + +/* FlashW General Definitions */ + + +/** @enum flashWPowerModes +* @brief Alias names for flash bank power modes +* +* This enumeration is used to provide alias names for the flash bank power modes: +* - sleep +* - standby +* - active +*/ +enum flashWPowerModes +{ + SYS_SLEEP = 0U, /**< Alias for flash bank power mode sleep */ + SYS_STANDBY = 1U, /**< Alias for flash bank power mode standby */ + SYS_ACTIVE = 3U /**< Alias for flash bank power mode active */ +}; + +/* USER CODE BEGIN (2) */ +/* USER CODE END */ + + +#define FSM_WR_ENA_HL (*(volatile uint32 *)0xFFF87288U) +#define EEPROM_CONFIG_HL (*(volatile uint32 *)0xFFF872B8U) + +/* Configuration registers */ +typedef struct tcmflash_config_reg +{ + uint32 CONFIG_FRDCNTL; + uint32 CONFIG_FEDACCTRL1; + uint32 CONFIG_FEDACCTRL2; + uint32 CONFIG_FEDACSDIS; + uint32 CONFIG_FBPROT; + uint32 CONFIG_FBSE; + uint32 CONFIG_FBAC; + uint32 CONFIG_FBFALLBACK; + uint32 CONFIG_FPAC1; + uint32 CONFIG_FPAC2; + uint32 CONFIG_FMAC; + uint32 CONFIG_FLOCK; + uint32 CONFIG_FDIAGCTRL; + uint32 CONFIG_FEDACSDIS2; +} tcmflash_config_reg_t; + +/* Configuration registers initial value */ +#define TCMFLASH_FRDCNTL_CONFIGVALUE (0x00000000U | (uint32)((uint32)3U << 8U) | (uint32)((uint32)1U << 4U) | 1U) +#define TCMFLASH_FEDACCTRL1_CONFIGVALUE 0x000A0005U +#define TCMFLASH_FEDACCTRL2_CONFIGVALUE 0U +#define TCMFLASH_FEDACSDIS_CONFIGVALUE 0U +#define TCMFLASH_FBPROT_CONFIGVALUE 0U +#define TCMFLASH_FBSE_CONFIGVALUE 0U +#define TCMFLASH_FBAC_CONFIGVALUE 0xFU +#define TCMFLASH_FBFALLBACK_CONFIGVALUE ( (uint32)((uint32)SYS_ACTIVE << 14U) \ + | (uint32)((uint32)3U << 12U) \ + | (uint32)((uint32)3U << 10U) \ + | (uint32)((uint32)3U << 8U) \ + | (uint32)((uint32)3U << 6U) \ + | (uint32)((uint32)3U << 4U) \ + | (uint32)((uint32)SYS_ACTIVE << 2U) \ + | (uint32)((uint32)SYS_ACTIVE << 0U) ) + +#define TCMFLASH_FPAC1_CONFIGVALUE 0x00C80001U +#define TCMFLASH_FPAC2_CONFIGVALUE 0U +#define TCMFLASH_FMAC_CONFIGVALUE 0U +#define TCMFLASH_FLOCK_CONFIGVALUE 0x55AAU +#define TCMFLASH_FDIAGCTRL_CONFIGVALUE 0x000A0000U +#define TCMFLASH_FEDACSDIS2_CONFIGVALUE 0U + +void tcmflashGetConfigValue(tcmflash_config_reg_t *config_reg, config_value_type_t type); + +/* USER CODE BEGIN (3) */ +/* USER CODE END */ + + +/* System Interface Functions */ +void setupPLL(void); +void trimLPO(void); +void customTrimLPO(void); +void setupFlash(void); +void periphInit(void); +void mapClocks(void); +void systemInit(void); +void systemPowerDown(uint32 mode); + +/*Configuration registers +* index 0: Even RAM +* index 1: Odd RAM +*/ +typedef struct sram_config_reg +{ + uint32 CONFIG_RAMCTRL[2U]; + uint32 CONFIG_RAMTHRESHOLD[2U]; + uint32 CONFIG_RAMINTCTRL[2U]; + uint32 CONFIG_RAMTEST[2U]; + uint32 CONFIG_RAMADDRDECVECT[2U]; +} sram_config_reg_t; + +/* Configuration registers initial value */ +#define SRAM_RAMCTRL_CONFIGVALUE 0x0005000AU +#define SRAM_RAMTHRESHOLD_CONFIGVALUE 1U +#define SRAM_RAMINTCTRL_CONFIGVALUE 1U +#define SRAM_RAMTEST_CONFIGVALUE 0x5U +#define SRAM_RAMADDRDECVECT_CONFIGVALUE 0U + +void sramGetConfigValue(sram_config_reg_t *config_reg, config_value_type_t type); +#ifdef __cplusplus +} +#endif /*extern "C" */ +#endif diff --git a/include/arch/rm46l8lp/halcogen/ti_fee.h b/include/arch/rm46l8lp/halcogen/ti_fee.h new file mode 100644 index 0000000..40800ef --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/ti_fee.h @@ -0,0 +1,504 @@ +/********************************************************************************************************************** + * FILE DESCRIPTION + * ------------------------------------------------------------------------------------------------------------------- + * File: ti_fee.h + * Project: Tms570_TIFEEDriver + * Module: TIFEEDriver + * Generator: None + * + * Description: This file implements the TI FEE Api. + *--------------------------------------------------------------------------------------------------------------------- + * Author: Vishwanath Reddy + *--------------------------------------------------------------------------------------------------------------------- + * Revision History + *--------------------------------------------------------------------------------------------------------------------- + * Version Date Author Change ID Description + *--------------------------------------------------------------------------------------------------------------------- + * 00.01.00 31Aug2012 Vishwanath Reddy 0000000000000 Initial Version + * 00.01.01 29Oct2012 Vishwanath Reddy 0000000000000 Changes for implementing Error Recovery + * 00.01.02 30Nov2012 Vishwanath Reddy SDOCM00097786 Misra Fixes, Memory segmentation changes. + * 00.01.03 14Jan2013 Vishwanath Reddy SDOCM00098510 Changes as requested by Vector. + * 00.01.04 12Feb2012 Vishwanath Reddy SDOCM00099152 Integration issues fix. + * 00.01.05 04Mar2013 Vishwanath Reddy SDOCM00099152 Added Deleting a block feature, bug fixes. + * 00.01.06 11Mar2013 Vishwanath Reddy SDOCM00099152 Added feature : copying of unconfigured blocks. + * 00.01.07 15Mar2013 Vishwanath Reddy SDOCM00099152 Added feature : Number of 8 bytes writes, fixed + issue with copy blocks. + * 00.01.08 05Apr2013 Vishwanath Reddy SDOCM00099152 Added feature : CRC check for unconfigured blocks, + Main function modified to complete writes as fast + as possible, Added Non polling mode support. + * 00.01.09 19Apr2013 Vishwanath Reddy SDOCM00099152 Warning removal, Added feature comparision of data + during write. + * 00.01.10 11Jun2013 Vishwanath Reddy SDOCM00101845 Updated version information. + * 00.01.11 05Jul2013 Vishwanath Reddy SDOCM00101643 Updated version information. + * 01.12.00 13Dec2013 Vishwanath Reddy SDOCM00105412 Traceability tags added. + * MISRA C fixes. Version info corrected. + * 01.13.00 30Dec2013 Vishwanath Reddy 0000000000000 Undated version info for SDOCM00107976 + * and SDOCM00105795. + * 01.13.01 19May2014 Vishwanath Reddy 0000000000000 Updated version info for SDOCM00107913 + * and SDOCM00107622. + * 01.13.02 12Jun2014 Vishwanath Reddy 0000000000000 Updated version info for SDOCM00108238 + * 01.14.00 26Mar2014 Vishwanath Reddy Update version info for SDOCM00107161. + * 01.15.00 06Jun2014 Vishwanath Reddy Support for Conqueror. + * 01.16.00 15Jul2014 Vishwanath Reddy SDOCM00112141 Remove MISRA warnings. + * 01.16.01 12Sep2014 Vishwanath Reddy SDOCM00112930 Prototype for TI_Fee_SuspendResumeErase added. + * TI_Fee_EraseCommandType enum added. + * extern added for TI_Fee_bEraseSuspended. + * 01.17.00 15Oct2014 Vishwanath Reddy SDOCM00113379 RAM Optimization changes. + * 01.17.01 30Oct2014 Vishwanath Reddy SDOCM00113536 Support for TMS570LS07xx,TMS570LS09xx, + * TMS570LS05xx, RM44Lx. + * 01.17.02 26Dec2014 Vishwanath Reddy SDOCM00114102 FLEE Errata Fix. + * SDOCM00114104 Change ALL 1's OK check condition. + * Updated version info. Added new macros. + * SDOCM00114423 Add new enum TI_Fee_DeviceType. + * Add new variable TI_Fee_MaxSectors and + * prototype TI_FeeInternal_PopulateStructures. + * 01.18.00 12Oct2015 Vishwanath Reddy SDOCM00119455 Update version history. + * Update ti_fee_util.c file for the + * bugfix "If morethan one data set is config- + * ured, then a valid block may get invalidated if + * multiple valid blocks are present in FEE memory. + * 01.18.01 17Nov2015 Vishwanath Reddy SDOCM00120161 Update version history. + * In TI_FeeInternal_FeeManager, do not change the + * state to IDLE,after completing the copy operation. + * 01.18.02 05Feb2016 Vishwanath Reddy SDOCM00121158 Update version history. + * Add a call of TI_FeeInternal_PollFlashStatus() + * before reading data from FEE bank in + * TI_FeeInternal_UpdateBlockOffsetArray(), + * TI_Fee_WriteAsync(),TI_Fee_WriteSync(), + * TI_Fee_ReadSync(), TI_Fee_Read() + * 01.18.03 30June2016 Vishwanath Reddy SDOCM00122388 Update patch version TI_FEE_SW_PATCH_VERSION. + * TI_FEE_FLASH_CRC_ENABLE is renamed to + * TI_FEE_FLASH_CHECKSUM_ENABLE. + * SDOCM00122429 In ti_fee_types.h, add error when endianess + * is not defined. + * 01.19.00 08Augu2016 Vishwanath Reddy SDOCM00122592 Update patch version TI_FEE_MINOR_VERSION. + * Code for using partially ersed sector is now + * removed. + * Bugfix for FEE reading from unimplemented memory + * space. + * 01.19.01 12Augu2016 Vishwanath Reddy SDOCM00122543 Update patch version TI_FEE_MINOR_VERSION. + * Synchronous write API modified to avoid copy of + * already copied block. + * 01.19.02 25Janu2017 Vishwanath Reddy SDOCM00122832 Update patch version TI_FEE_MINOR_VERSION. + * Format API modified to erase all configured VS. + * SDOCM00122833 In API TI_Fee_ErrorRecovery, added polling for + * flash status before calling TI_Fee_Init. + * 01.19.03 15May2017 Prathap Srinivasan SDOCM00122917 Added TI_Fee_bIsMainFunctionCalled Global Variable. + * 01.19.04 05Dec2017 Prathap Srinivasan HERCULES_SW-5082 Update version history. + *********************************************************************************************************************/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + +#ifndef TI_FEE_H +#define TI_FEE_H + +/********************************************************************************************************************** + * INCLUDES + *********************************************************************************************************************/ +#include "hal_stdtypes.h" +#include "fee_interface.h" +#include "ti_fee_types.h" +#include "ti_fee_cfg.h" +/********************************************************************************************************************** + * GLOBAL CONSTANT MACROS + *********************************************************************************************************************/ +/* Fee Published Information */ +#define TI_FEE_MAJOR_VERSION 3U +#define TI_FEE_MINOR_VERSION 0U +#define TI_FEE_PATCH_VERSION 2U +#define TI_FEE_SW_MAJOR_VERSION 1U +#define TI_FEE_SW_MINOR_VERSION 19U +#define TI_FEE_SW_PATCH_VERSION 4U + +#define TI_FEE_VIRTUAL_SECTOR_VERSION 1U + +/* Virtual sector states */ +#define ActiveVSHi 0x0000FFFFU +#define ActiveVSLo 0x00000000U +#define CopyVSHi 0xFFFFFFFFU +#define CopyVSLo 0x00000000U +#define EmptyVSHi 0xFFFFFFFFU +#define EmptyVSLo 0x0000FFFFU +#define InvalidVSHi 0xFFFFFFFFU +#define InvalidVSLo 0xFFFFFFFFU +#define ReadyforEraseVSHi 0x00000000U +#define ReadyforEraseVSLo 0x00000000U + +/* Data Block states*/ +#define EmptyBlockHi 0xFFFFFFFFU +#define EmptyBlockLo 0xFFFFFFFFU +#define StartProgramBlockHi 0xFFFF0000U +#define StartProgramBlockLo 0xFFFFFFFFU +#define ValidBlockHi 0x00000000U +#define ValidBlockLo 0xFFFFFFFFU +#define InvalidBlockHi 0x00000000U +#define InvalidBlockLo 0xFFFF0000U +#define CorruptBlockHi 0x00000000U +#define CorruptBlockLo 0x00000000U + +#define FEE_BANK 0U + +/* Enable/Disable FEE sectors */ +#define FEE_DISABLE_SECTORS_31_00 0x00000000U +#define FEE_DISABLE_SECTORS_63_32 0x00000000U +#define FEE_ENABLE_SECTORS_31_00 0xFFFFFFFFU +#define FEE_ENABLE_SECTORS_63_32 0xFFFFFFFFU + +/********************************************************************************************************************** + * GLOBAL DATA TYPES AND STRUCTURES + *********************************************************************************************************************/ +/* Structures used */ +/* Enum to describe the Fee Status types */ +typedef enum +{ + TI_FEE_OK = 0U, /* Function returned no error */ + TI_FEE_ERROR = 1U /* Function returned an error */ +} TI_Fee_StatusType; + +/* Enum to describe the Virtual Sector State */ +typedef enum +{ + VsState_Invalid=1U, + VsState_Empty=2U, + VsState_Copy=3U, + VsState_Active=4U, + VsState_ReadyForErase=5U +}VirtualSectorStatesType; + +/* Enum to describe the Block State */ +typedef enum +{ + Block_StartProg=1U, + Block_Valid=2U, + Block_Invalid=3U +}BlockStatesType; + +/* Enum for error trpes */ +typedef enum +{ + Error_Nil=0U, + Error_TwoActiveVS=1U, + Error_TwoCopyVS=2U, + Error_SetupStateMachine=3U, + Error_CopyButNoActiveVS=4U, + Error_NoActiveVS=5U, + Error_BlockInvalid=6U, + Error_NullDataPtr=7U, + Error_NoFreeVS=8U, + Error_InvalidVirtualSectorParameter=9U, + Error_ExceedSectorOnBank=10U, + Error_EraseVS=11U, + Error_BlockOffsetGtBlockSize=12U, + Error_LengthParam=13U, + Error_FeeUninit=14U, + Error_Suspend=15U, + Error_InvalidBlockIndex=16U, + Error_NoErase=17U, + Error_CurrentAddress=18U, + Error_Exceed_No_Of_DataSets=19U +}TI_Fee_ErrorCodeType; + +typedef enum +{ + Suspend_Erase=0U, + Resume_Erase +}TI_Fee_EraseCommandType; + +/* Enum to describe the Device types */ +typedef enum +{ + CHAMPION = 0U, /* Function returned no error */ + ARCHER = 1U /* Function returned an error */ +} TI_Fee_DeviceType; + +typedef uint32 TI_Fee_AddressType; /* Used for defining variables to indicate number of + bytes for address offset */ +typedef uint32 TI_Fee_LengthType; /* Used for defining variables to indicate number of + bytes per read/write/erase */ +typedef TI_Fee_ErrorCodeType Fee_ErrorCodeType; + +/* Structure used when defining virtual sectors */ +/* The following error checks need to be performed: */ +/* Virtual Sector definitions are not allowed to overlap */ +/* Virtual Sector definition is at least twice the size in bytes of the total size of all defined blocks */ +/* We will need to define a formula to indicate if the number of write cycles indicated in the block definitions */ +/* is possible in the defined Virtual Sector. */ +/* Ending sector cannot be less than Starting sector */ +typedef struct +{ + uint16 FeeVirtualSectorNumber; /* Virtual Sector's Number - 0 and 0xFFFF values are not allowed*/ + /* Minimum 1, Maximum 4 */ + uint16 FeeFlashBank; /* Flash Bank to use for virtual sector. */ + /* As we do not allow Flash EEPROM Emulation in Bank 0, + 0 is not a valid option */ + /* Defaultvalue 1, Minimum 1, Maxiumum 7 */ + Fapi_FlashSectorType FeeStartSector; /* Defines the Starting Sector inthe Bank for this VirtualSector*/ + Fapi_FlashSectorType FeeEndSector; /* Defines the Ending Sector inthe Bank for this Virtual Sector */ + /* Start and End sectors can be the same, which indicates only + one sector */ + /* is the entire virtual sector. */ + /* Values are based on the FLASH_SECT enum */ + /* Defaultvalue and Min is the same sector defined as the starting + sector */ + /* Max values are based onthe device definition file being used.*/ +} Fee_VirtualSectorConfigType; + +/* Structure used when defining blocks */ +typedef struct +{ + uint16 FeeBlockNumber; /* Block's Number - 0 and 0xFFFF values are not allowed */ + /* Start 1, Next: Number of Blocks + 1, Min 1, Max 0xFFFE */ + uint16 FeeBlockSize; /* Block's Size - Actual number of bits used is reduced */ + /* by number of bits used for dataset. */ + /* Default 8, Min 1, Max (2^(16-# of Dataset Bits))-1 */ + boolean FeeImmediateData; /* Indicates if the block is used for immediate data */ + /* Default: False */ + uint32 FeeNumberOfWriteCycles; /* Number of write cycles this block requires */ + /* Default: 0, but this will not be a valid number. + Force customer to select a value */ + /* Min 1, Max (2^32)-1 */ + uint8 FeeDeviceIndex; /* Device Index - This will always be 0 */ + /* Fixed value: 0 */ + uint8 FeeNumberOfDataSets; /* Number of DataSets for the Block */ + /* Default value: 1 */ + uint8 FeeEEPNumber; +} Fee_BlockConfigType; + + +/* Structure used for Global variables */ +typedef struct +{ + TI_Fee_AddressType Fee_oFlashNextAddress; /* The next Flash Address to write to */ + TI_Fee_AddressType Fee_oCopyCurrentAddress; /* Indicates the Address within the Active VS + which will be copied to Copy VS */ + TI_Fee_AddressType Fee_oCopyNextAddress; /* Indicates the Address within the Copy VS to + which the data from Active VS will be copied to */ + TI_Fee_AddressType Fee_u32nextwriteaddress; /* Indicates the next free Address within the curent + VS to which the data will be written */ + TI_Fee_AddressType Fee_oVirtualSectorStartAddress; /* Start Address of the current Virtual Sector */ + TI_Fee_AddressType Fee_oVirtualSectorEndAddress; /* End Address of the current Virtual Sector */ + TI_Fee_AddressType Fee_oCopyVirtualSectorAddress; /* Start Address of the Copy Virtual Address */ + TI_Fee_AddressType Fee_oCurrentStartAddress; /* Start Address of the Previous Block */ + TI_Fee_AddressType Fee_oCurrentBlockHeader; /* Start Address of the Block which is being currently + written*/ + TI_Fee_AddressType Fee_oWriteAddress; /* Address within the VS where data is to be written */ + TI_Fee_AddressType Fee_oCopyWriteAddress; /* Address within the VS where data is to be copied */ + TI_Fee_AddressType Fee_oActiveVirtualSectorAddress; /* Start Address of the Active VS */ + TI_Fee_AddressType Fee_oBlankFailAddress; /* Address of first non-blank location */ + TI_Fee_AddressType Fee_oActiveVirtualSectorStartAddress;/* Start Address of the active VS */ + TI_Fee_AddressType Fee_oActiveVirtualSectorEndAddress; /* End Address of the active VS */ + TI_Fee_AddressType Fee_oCopyVirtualSectorStartAddress; /* Start Address of the Copy VS */ + TI_Fee_AddressType Fee_oCopyVirtualSectorEndAddress; /* End Address of the Copy VS */ + TI_Fee_AddressType Fee_u32nextActiveVSwriteaddress; /* Next write address in Active VS */ + TI_Fee_AddressType Fee_u32nextCopyVSwriteaddress; /* Next write address in Copy VS */ + uint16 Fee_u16CopyBlockSize; /* Indicates the size of current block in bytes which is + been copied from Active to Copy VS */ + uint8 Fee_u8VirtualSectorStart; /* Index of the Start Sector of the VS */ + uint8 Fee_u8VirtualSectorEnd; /* Index of the End Sector of the VS */ + uint32 Fee_au32VirtualSectorStateValue[TI_FEE_VIRTUAL_SECTOR_OVERHEAD >> 2U]; /* Array to store the Virtual + Sector Header and + Information record */ + uint8 Fee_au8VirtualSectorState[TI_FEE_NUMBER_OF_VIRTUAL_SECTORS]; /* Stores the state of each + Virtual sector */ + uint32 Fee_au32VirtualSectorEraseCount[TI_FEE_NUMBER_OF_VIRTUAL_SECTORS]; /* Array to store the erase + count of each Virtual + Sector*/ + uint16 Fee_au16BlockOffset[TI_FEE_TOTAL_BLOCKS_DATASETS]; /* Array to store within the VS */ + uint32 Fee_au32BlockHeader[TI_FEE_BLOCK_OVERHEAD >> 2U]; /* Array to store the Block Header value */ + uint8 Fee_au8BlockCopyStatus[TI_FEE_TOTAL_BLOCKS_DATASETS]; /* Array to storeblock copy status */ + uint8 Fee_u8InternalVirtualSectorStart; /* Indicates internal VS start index */ + uint8 Fee_u8InternalVirtualSectorEnd; /* Indicates internal VS end index */ + TI_FeeModuleStatusType Fee_ModuleState; /* Indicates the state of the FEE module */ + TI_FeeJobResultType Fee_u16JobResult; /* Stores the Job Result of the current command */ + TI_Fee_StatusType Fee_oStatus; /* Indicates the status of FEE */ + TI_Fee_ErrorCodeType Fee_Error; /* Indicates the Error code */ + uint16 Fee_u16CopyBlockNumber; /* Block number which is currently being copied */ + uint16 Fee_u16BlockIndex; /* Index of the Current Block */ + uint16 Fee_u16BlockCopyIndex; /* Index of the Block being copied from Copy to Active VS */ + uint16 Fee_u16DataSetIndex; /* Index of the Current DataSet */ + uint16 Fee_u16ArrayIndex; /* Index of the Current DataSet */ + uint16 Fee_u16BlockSize; /* Size of the current block in bytes */ + uint16 Fee_u16BlockSizeinBlockHeader; /* Size of the current block. Used to write into Block Header */ + uint16 Fee_u16BlockNumberinBlockHeader; /* Number of the current block. Used to write into Block Header */ + uint8 Fee_u8ActiveVirtualSector; /* Indicates the FeeVirtualSectorNumber for the Active VS */ + uint8 Fee_u8CopyVirtualSector; /* Indicates the FeeVirtualSectorNumber for the Copy VS */ + uint32 Fee_u32InternalEraseQueue; /* Indicates which VS can be erased when the FEE is in + BusyInternal State*/ + uint8 Fee_u8WriteCopyVSHeader; /* Indicates the number of bytes of the Copy VS Header being + written */ + uint8 Fee_u8WriteCount; /* Indicates the number of bytes of the Block Header being + written */ + uint8 * Fee_pu8ReadDataBuffer; /* Pointer to read data */ + uint8 * Fee_pu8ReadAddress; /* Pointer to read address */ + uint8 * Fee_pu8Data; /* Pointer to the next data to be written to the VS */ + uint8 * Fee_pu8CopyData; /* Pointer to the next data to be copied to the VS */ + uint8 * Fee_pu8DataStart; /* Pointer to the first data to be written to the VS */ + boolean Fee_bInvalidWriteBit; /* Indicates whether the block is written/invalidated/erased + for the first time */ + boolean Fee_bWriteData; /* Indicates that there is data which is pending to be written + to the Block */ + boolean Fee_bWriteBlockHeader; /* Indicates whether the Block Header has been written or not */ + boolean bWriteFirstTime; /* Indicates if the block is being written first time */ + boolean Fee_bFindNextVirtualSector; /* Indicates if there is aneed to find next free VS */ + boolean Fee_bWriteVSHeader; /* Indicates if block header needs to be written */ + boolean Fee_bWriteStartProgram; /* Indicates if start program block header needs to be written */ + boolean Fee_bWritePartialBlockHeader; /* Indicates if start program block header needs to be written */ + #if (TI_FEE_NUMBER_OF_UNCONFIGUREDBLOCKSTOCOPY != 0U) + uint16 Fee_au16UnConfiguredBlockAddress[TI_FEE_NUMBER_OF_UNCONFIGUREDBLOCKSTOCOPY]; /* Indicates + number of unconfigured blocks to copy */ + uint8 Fee_au8UnConfiguredBlockCopyStatus[TI_FEE_NUMBER_OF_UNCONFIGUREDBLOCKSTOCOPY]; /* Array to store block + copy status */ + #endif +}TI_Fee_GlobalVarsType; + +/********************************************************************************************************************** + * EXTERN Declarations + *********************************************************************************************************************/ +/* Fee Global Variables */ +extern const Fee_BlockConfigType Fee_BlockConfiguration[TI_FEE_NUMBER_OF_BLOCKS]; +#if (TI_FEE_GENERATE_DEVICEANDVIRTUALSECTORSTRUC == STD_OFF) +extern const Fee_VirtualSectorConfigType Fee_VirtualSectorConfiguration[TI_FEE_NUMBER_OF_VIRTUAL_SECTORS]; +extern const Device_FlashType Device_FlashDevice; +#endif +#if (TI_FEE_GENERATE_DEVICEANDVIRTUALSECTORSTRUC == STD_ON) +extern Fee_VirtualSectorConfigType Fee_VirtualSectorConfiguration[TI_FEE_NUMBER_OF_VIRTUAL_SECTORS]; +extern Device_FlashType Device_FlashDevice; +extern uint8 TI_Fee_MaxSectors; +#endif +extern TI_Fee_GlobalVarsType TI_Fee_GlobalVariables[TI_FEE_NUMBER_OF_EEPS]; +extern TI_Fee_StatusWordType_UN TI_Fee_oStatusWord[TI_FEE_NUMBER_OF_EEPS]; +#if(TI_FEE_FLASH_CHECKSUM_ENABLE == STD_ON) +extern uint32 TI_Fee_u32FletcherChecksum; +#endif +extern uint32 TI_Fee_u32BlockEraseCount; +extern uint8 TI_Fee_u8DataSets; +extern uint8 TI_Fee_u8DeviceIndex; +extern uint32 TI_Fee_u32ActCpyVS; +extern uint8 TI_Fee_u8ErrEraseVS; +#if (TI_FEE_NUMBER_OF_UNCONFIGUREDBLOCKSTOCOPY != 0U) +extern uint16 TI_Fee_u16NumberOfUnconfiguredBlocks[TI_FEE_NUMBER_OF_EEPS]; +#endif +#if(TI_FEE_FLASH_ERROR_CORRECTION_HANDLING == TI_Fee_Fix) +extern boolean Fee_bDoubleBitError; +extern boolean Fee_bSingleBitError; +#endif +#if(TI_FEE_NUMBER_OF_EEPS==2U) +extern TI_Fee_StatusWordType_UN TI_Fee_oStatusWord_Global; +#endif +extern boolean TI_Fee_FapiInitCalled; +extern boolean TI_Fee_bEraseSuspended; +extern boolean TI_Fee_bIsMainFunctionCalled; + + +/********************************************************************************************************************** + * GLOBAL FUNCTION PROTOTYPES + *********************************************************************************************************************/ +/* Interface Functions */ +extern void TI_Fee_Cancel(uint8 u8EEPIndex); +extern Std_ReturnType TI_Fee_EraseImmediateBlock(uint16 BlockNumber); +extern TI_FeeModuleStatusType TI_Fee_GetStatus(uint8 u8EEPIndex); +extern void TI_Fee_GetVersionInfo(Std_VersionInfoType* VersionInfoPtr); +extern void TI_Fee_Init(void); +extern Std_ReturnType TI_Fee_InvalidateBlock(uint16 BlockNumber); +extern Std_ReturnType TI_Fee_Read(uint16 BlockNumber, + uint16 BlockOffset, + uint8* DataBufferPtr, + uint16 Length); +extern Std_ReturnType TI_Fee_WriteAsync(uint16 BlockNumber, uint8* DataBufferPtr); +extern void TI_Fee_MainFunction(void); +extern TI_Fee_ErrorCodeType TI_FeeErrorCode(uint8 u8EEPIndex); +extern void TI_Fee_ErrorRecovery(TI_Fee_ErrorCodeType ErrorCode, uint8 u8VirtualSector); +extern TI_FeeJobResultType TI_Fee_GetJobResult(uint8 u8EEPIndex); +extern void TI_Fee_SuspendResumeErase(TI_Fee_EraseCommandType Command); + +#if(TI_FEE_FLASH_ERROR_CORRECTION_HANDLING == TI_Fee_Fix) +extern void TI_Fee_ErrorHookSingleBitError(void); +extern void TI_Fee_ErrorHookDoubleBitError(void); +#endif + +#if(TI_FEE_DRIVER == 1U) +extern Std_ReturnType TI_Fee_WriteSync(uint16 BlockNumber, uint8* DataBufferPtr); +extern Std_ReturnType TI_Fee_Shutdown(void); +extern boolean TI_Fee_Format(uint32 u32FormatKey); +extern Std_ReturnType TI_Fee_ReadSync(uint16 BlockNumber,uint16 BlockOffset,uint8* DataBufferPtr,uint16 Length); +#endif + +/* TI Fee Internal Functions */ +TI_Fee_AddressType TI_FeeInternal_GetNextFlashAddress(uint8 u8EEPIndex); +TI_Fee_AddressType TI_FeeInternal_AlignAddressForECC(TI_Fee_AddressType oAddress); +TI_Fee_AddressType TI_FeeInternal_GetCurrentBlockAddress(uint16 BlockNumber,uint16 DataSetNumber, uint8 u8EEPIndex); +/*SAFETYMCUSW 61 X MR:1.4,5.1 "Reason - TI_FeeInternal_GetVirtualSectorParameter name is required here."*/ +uint32 TI_FeeInternal_GetVirtualSectorParameter(Fapi_FlashSectorType oSector, uint16 u16Bank, boolean VirtualSectorInfo, + uint8 u8EEPIndex); +uint32 TI_FeeInternal_PollFlashStatus(void); +uint16 TI_FeeInternal_GetBlockSize(uint16 BlockIndex); +uint16 TI_FeeInternal_GetBlockIndex(uint16 BlockNumber); +uint16 TI_FeeInternal_GetDataSetIndex(uint16 BlockNumber); +uint16 TI_FeeInternal_GetBlockNumber(uint16 BlockNumber); +uint8 TI_FeeInternal_FindNextVirtualSector(uint8 u8EEPIndex); +uint8 TI_FeeInternal_WriteDataF021(boolean bCopy,uint16 u16WriteSize, uint8 u8EEPIndex); +boolean TI_FeeInternal_BlankCheck(uint32 u32StartAddress, uint32 u32EndAddress, uint16 u16Bank, uint8 u8EEPIndex); +Std_ReturnType TI_FeeInternal_CheckReadParameters(uint32 u32BlockSize,uint16 BlockOffset, const uint8* DataBufferPtr, + uint16 Length, uint8 u8EEPIndex); +Std_ReturnType TI_FeeInternal_CheckModuleState(uint8 u8EEPIndex); +Std_ReturnType TI_FeeInternal_InvalidateErase(uint16 BlockNumber); +TI_Fee_StatusType TI_FeeInternal_FeeManager(uint8 u8EEPIndex); +void TI_FeeInternal_WriteVirtualSectorHeader(uint8 FeeVirtualSectorNumber, VirtualSectorStatesType VsState, + uint8 u8EEPIndex) ; +/*SAFETYMCUSW 61 X MR:1.4,5.1 "Reason - TI_FeeInternal_GetVirtualSectorIndex name is required here."*/ +void TI_FeeInternal_GetVirtualSectorIndex(Fapi_FlashSectorType oSectorStart, Fapi_FlashSectorType oSectorEnd, + uint16 u16Bank, boolean bOperation, uint8 u8EEPIndex); +void TI_FeeInternal_WritePreviousBlockHeader(boolean bWrite, uint8 u8EEPIndex); +void TI_FeeInternal_WriteBlockHeader(boolean bWrite, uint8 u8EEPIndex,uint16 Fee_BlockSize_u16,uint16 u16BlockNumber); +void TI_FeeInternal_SetClearCopyBlockState(uint8 u8EEPIndex, boolean bSetClear); +void TI_FeeInternal_SanityCheck(uint16 BlockSize, uint8 u8EEPIndex); +void TI_FeeInternal_StartProgramBlock(uint8 u8EEPIndex); +void TI_FeeInternal_UpdateBlockOffsetArray(uint8 u8EEPIndex, boolean bActCpyVS,uint8 u8VirtualSector); +void TI_FeeInternal_WriteInitialize(TI_Fee_AddressType oFlashNextAddress, uint8* DataBufferPtr, uint8 u8EEPIndex); +void TI_FeeInternal_CheckForError(uint8 u8EEPIndex); +void TI_FeeInternal_EnableRequiredFlashSector(uint32 u32VirtualSectorStartAddress); +uint16 TI_FeeInternal_GetArrayIndex(uint16 BlockNumber, uint16 DataSetNumber, uint8 u8EEPIndex, boolean bCallContext); +#if(TI_FEE_FLASH_CHECKSUM_ENABLE == STD_ON) +uint32 TI_FeeInternal_Fletcher16( uint8 const *pu8data, uint16 u16Length); +#endif +#if (TI_FEE_GENERATE_DEVICEANDVIRTUALSECTORSTRUC == STD_ON) +void TI_FeeInternal_PopulateStructures(TI_Fee_DeviceType DeviceType); +#endif +#endif /* TI_FEE_H */ +/********************************************************************************************************************** + * END OF FILE: ti_fee.h + *********************************************************************************************************************/ + + diff --git a/include/arch/rm46l8lp/halcogen/ti_fee_cfg.h b/include/arch/rm46l8lp/halcogen/ti_fee_cfg.h new file mode 100644 index 0000000..f2d0a16 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/ti_fee_cfg.h @@ -0,0 +1,55 @@ +/********************************************************************************************************************** + * FILE DESCRIPTION + * ------------------------------------------------------------------------------------------------------------------- + * File: ti_fee_cfg.h + * Project: Tms570_TIFEEDriver + * Module: TIFEEDriver + * Generator: HALCoGen + * + * Description: This file implements the TI FEE Api. + *--------------------------------------------------------------------------------------------------------------------- + * Author: Vishwanath Reddy + *--------------------------------------------------------------------------------------------------------------------- + * Revision History + *--------------------------------------------------------------------------------------------------------------------- + * Version Date Author Change ID Description + *--------------------------------------------------------------------------------------------------------------------- + * 00.00.01 31Aug2012 Vishwanath Reddy 0000000000000 Initial Version + * 01.19.04 05Dec2017 Prathap Srinivasan HERCULES_SW-5082 Update version history. + * + *********************************************************************************************************************/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + diff --git a/include/arch/rm46l8lp/halcogen/ti_fee_types.h b/include/arch/rm46l8lp/halcogen/ti_fee_types.h new file mode 100644 index 0000000..5f889b2 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/ti_fee_types.h @@ -0,0 +1,203 @@ +/********************************************************************************************************************** + * FILE DESCRIPTION + * ------------------------------------------------------------------------------------------------------------------- + * File: ti_fee_types.h + * Project: Tms570_TIFEEDriver + * Module: TIFEEDriver + * Generator: None + * + * Description: This file implements the TI FEE Api. + *--------------------------------------------------------------------------------------------------------------------- + * Author: Vishwanath Reddy + *--------------------------------------------------------------------------------------------------------------------- + * Revision History + *--------------------------------------------------------------------------------------------------------------------- + * Version Date Author Change ID Description + *--------------------------------------------------------------------------------------------------------------------- + * 03.00.00 31Aug2012 Vishwanath Reddy 0000000000000 Initial Version + * 00.01.00 31Aug2012 Vishwanath Reddy 0000000000000 Initial Version + * 00.01.02 30Nov2012 Vishwanath Reddy SDOCM00097786 Misra Fixes, Memory segmentation changes. + * 01.12.00 13Dec2013 Vishwanath Reddy SDOCM00105412 MISRA C fixes. + * 01.15.00 06Jun2014 Vishwanath Reddy Support for LC Varients. + * 01.16.00 15Jul2014 Vishwanath Reddy SDOCM00112141 Remove MISRA warnings. + * 01.18.00 12Oct2015 Vishwanath Reddy SDOCM00119455 Update version history. + * 01.18.01 17Nov2015 Vishwanath Reddy SDOCM00120161 Update version history. + * 01.18.02 05Feb2016 Vishwanath Reddy SDOCM00121158 Update version history. + * 01.18.03 30June2016 Vishwanath Reddy SDOCM00122388 Update version history. + * SDOCM00122429 Added error when endianess is not defined. + * 01.19.00 08Augu2016 Vishwanath Reddy SDOCM00122592 Update version history. + * 01.19.01 12Augu2016 Vishwanath Reddy SDOCM00122543 Update version history. + * 01.19.03 15May2017 Prathap Srinivasan SDOCM00122917 Update version history. + * 01.19.04 05Dec2017 Prathap Srinivasan HERCULES_SW-5082 Update version history. + *********************************************************************************************************************/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + +#ifndef TI_FEE_TYPES_H +#define TI_FEE_TYPES_H + +/********************************************************************************************************************** + * INCLUDES + *********************************************************************************************************************/ +#include "Device_header.h" + +#ifndef TI_Fee_None +#define TI_Fee_None 0x00U /*Take no action on single bit errors, (respond with corrected data), */ + /*return error for uncorrectable error reads (multibit errors for ECC or parity failures)*/ + /*For devices with no ECC (they may have parity or not) the only valid option is none. */ +#endif + +#ifndef TI_Fee_Fix +#define TI_Fee_Fix 0x01U /* single bit error will be fixed by reprogramming */ + /* return previous valid data for uncorrectable error reads (multi bit errors for ECC + or parity failures). */ +#endif + +#if !defined(_LITTLE_ENDIAN) && !defined(_BIG_ENDIAN) +#error "Target Endianess is not defined. Include F021 header files and library." +#endif + +/*SAFETYMCUSW 74 S MR:18.4 "Reason - union declaration is necessary here."*/ +typedef union +{ + uint16 Fee_u16StatusWord; + #ifdef _BIG_ENDIAN + struct + { + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 Reserved: 5U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 Erase:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 ReadSync:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 ProgramFailed:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 Read:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 WriteSync:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 WriteAsync:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 EraseImmediate:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 InvalidateBlock:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 Copy:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 Initialized:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 SingleBitError:1U; + }Fee_StatusWordType_ST; + #endif + #ifdef _LITTLE_ENDIAN + struct + { + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 SingleBitError:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 Initialized:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 Copy:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 InvalidateBlock:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 EraseImmediate:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 WriteAsync:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 WriteSync:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 Read:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 ProgramFailed:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 ReadSync:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 Erase:1U; + /*SAFETYMCUSW 42 S MR:3.5 "Reason - Bit field declaration is necessary here."*/ + /*SAFETYMCUSW 73 S MR:6.4 "Reason - Bit field is declared as unsigned."*/ + uint16 Reserved: 5U; + }Fee_StatusWordType_ST; + #endif +}TI_Fee_StatusWordType_UN; + +typedef enum +{ + UNINIT, + IDLE, + /*SAFETYMCUSW 91 S MR:5.2,5.6,5.7 "Reason - BUSY in F021 is a member of structure."*/ + BUSY, + BUSY_INTERNAL +}TI_FeeModuleStatusType; + +typedef enum +{ + JOB_OK, + JOB_FAILED, + JOB_PENDING, + JOB_CANCELLED, + BLOCK_INCONSISTENT, + BLOCK_INVALID +}TI_FeeJobResultType; + +#endif /* TI_FEE_TYPES_H */ + +/********************************************************************************************************************** + * END OF FILE: ti_fee_types.h + *********************************************************************************************************************/ diff --git a/include/arch/rm46l8lp/halcogen/usb-ids.h b/include/arch/rm46l8lp/halcogen/usb-ids.h new file mode 100644 index 0000000..6490ece --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/usb-ids.h @@ -0,0 +1,71 @@ +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +/** + * @file usb-ids.h + * + * @brief Definitions of VIDs and PIDs used by Stellaris USB examples. + * + */ + +#ifndef __USBIDS_H__ +#define __USBIDS_H__ + +/** *************************************************************************** + * + * TI Vendor ID. + * + *****************************************************************************/ +#define USB_VID_TI 0x0000 + +/** *************************************************************************** + * + * Product IDs. + * + *****************************************************************************/ +#define USB_PID_MOUSE 0x0000 +#define USB_PID_KEYBOARD 0x0001 +#define USB_PID_SERIAL 0x0000 +#define USB_PID_BULK 0x0003 +#define USB_PID_SCOPE 0x0004 +#define USB_PID_MSC 0x0005 +#define USB_PID_AUDIO 0x0006 +#define USB_PID_COMP_SERIAL 0x0007 +#define USB_PID_COMP_AUDIO_HID 0x0008 +#define USB_PID_COMP_HID_SER 0x0009 +#define USB_PID_DFU 0x00FF + + +#endif /* __USBIDS_H__ */ diff --git a/include/arch/rm46l8lp/halcogen/usb.h b/include/arch/rm46l8lp/halcogen/usb.h new file mode 100644 index 0000000..d08df05 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/usb.h @@ -0,0 +1,694 @@ +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + +#ifndef USB_H_ +#define USB_H_ + +/****************************************************************************** + * + * These macros allow conversion between 0-based endpoint indices and the + * USB_EP_x values required when calling various USB APIs. + * + *****************************************************************************/ +#define INDEX_TO_USB_EP(x) ((x) << 4u) +#define USB_EP_TO_INDEX(x) ((x) >> 4u) + +/****************************************************************************** + * + * The following are values that can be passed to USBFIFOConfigSet() as the + * uFIFOSize parameter. + * + *****************************************************************************/ +#define USB_FIFO_SZ_8 0x00U /* 8 byte FIFO */ +#define USB_FIFO_SZ_16 0x01U /* 16 byte FIFO */ +#define USB_FIFO_SZ_32 0x02U /* 32 byte FIFO */ +#define USB_FIFO_SZ_64 0x03U /* 64 byte FIFO */ +#define USB_FIFO_SZ_128 0x04U /* 128 byte FIFO */ +#define USB_FIFO_SZ_256 0x05U /* 256 byte FIFO */ +#define USB_FIFO_SZ_512 0x06U /* 512 byte FIFO */ +#define USB_FIFO_SZ_1024 0x07U /* 1024 byte FIFO */ + + +/****************************************************************************** + * + * This macro allow conversion from a FIFO size label as defined above to + * a number of bytes + * + *****************************************************************************/ +#define USB_FIFO_SIZE_DB_FLAG 0x10U +#define USB_FIFO_SZ_TO_BYTES(x) (uint16_t)((uint8_t)8U << (((uint8_t)(x) & (uint8_t)(~(uint8_t)USB_FIFO_SIZE_DB_FLAG)) + \ + (uint8_t)(((uint8_t)(x) & (uint8_t)USB_FIFO_SIZE_DB_FLAG) >> 4U))) + + +/****************************************************************************** + * + * The maximum number of independent interfaces that any single device + * implementation can support. Independent interfaces means interface + * descriptors with different bInterfaceNumber values - several interface + * descriptors offering different alternative settings but the same interface + * number count as a single interface. + * + *****************************************************************************/ +#define USB_MAX_INTERFACES_PER_DEVICE 8u + + +/****************************************************************************** + * + * Following macro directives can be used for the configuring the USB device. + * Note that these directives map directly to the hardware bit definitions and + * cannot be modified to any other value. + * + *****************************************************************************/ +#define USBD_PWR_BUS_PWR (0x0000u) /* Device is bus powered */ +#define USBD_PWR_SELF_PWR (0x0004u) /* Device is self powered */ +#define USBD_DATA_ENDIAN_LITTLE (0x0000u) /* Little Endian Data (RM48x) */ +#define USBD_DATA_ENDIAN_BIG (0x0080u) /* Bit Endian Data */ +#define USBD_DMA_ENDIAN_LITTLE (0x0000u) /* DMA is Little Endian */ +#define USBD_DMA_ENDIAN_BIG (0x0040u) /* DMA is Big Endian */ + +/****************************************************************************** + * + * Following macro directives can be used for the configuring the Endpoints + * Note that these directives map directly to the hardware bit definitions and + * cannot be modified to any other value. + * + *****************************************************************************/ + +#define USBD_EP_DIR_IN (0x0010u) /* IN Endpoint */ +#define USBD_EP_DIR_OUT (0x0000u) /* OUT Endpoint */ +#define USB_EP_DEV_IN (USBD_EP_DIR_IN) /* IN Endpoint */ +#define USB_EP_DEV_OUT (USBD_EP_DIR_OUT)/* OUT Endpoint */ +#define USB_TRANS_IN (USBD_EP_DIR_IN) /* IN Endpoint */ +#define USB_TRANS_OUT (USBD_EP_DIR_OUT)/* OUT Endpoint */ +#define USB_EP_DIR_IN (USBD_EP_DIR_IN) +#define USB_EP_DIR_OUT (USBD_EP_DIR_OUT) +#define USB_TRANS_IN_LAST 0u /* Used to indicate the last transaction + (NOT USED in this port of USB) */ + +#define USBD_TXRX_EP_VALID_VALID (0x8000u) /* EP is valid & configured */ +#define USBD_TXRX_EP_VALID_NOTVALID (0x0000u) /* EP is not valid & not configured */ +#define USBD_TXRX_EP_ISO_ISO (0x0800u) /* EP is of ISO type */ +#define USBD_TXRX_EP_ISO_NONISO (0x0000u) /* EP is either Bulk/Interrup/Control */ +#define USBD_TXRX_EP_DB_ENABLED (0x4000u) /* EP has double buffering enabled */ + /* For IN EPs DB should be enabled only in DMA mode */ +#define USBD_TXRX_EP_DB_DISABLED (0x0000u) /* EP has double buffering disabled */ + +/****************************************************************************** + * + * Following macro directives are to be used for enabling/disabling interrupts + * Note that these directives map directly to the hardware bit definitions and + * cannot be modified to any other value. + * + *****************************************************************************/ +#define USBD_INT_EN_SOF_IE (0x0080u) /* Start-of-Frame Interrupt */ +#define USBD_INT_EN_EPN_RX_IE (0x0020u) /* Non-EP0 RX Interrupt */ +#define USBD_INT_EN_EPN_TX_IE (0x0010u) /* Non-EP0 TX Interrupt */ +#define USBD_INT_EN_DS_CHG_IE (0x0008u) /* Device State change interrupt */ +#define USBD_INT_EN_EP0_IE (0x0001u) /* EP0 Interrupt */ +#define USBD_INT_EN_ALL (USBD_IRQ_EN_SOF_IE | \ + USBD_IRQ_EN_EPN_RX_IE | \ + USBD_IRQ_EN_EPN_TX_IE | \ + USBD_IRQ_EN_DS_CHG_IE | \ + USBD_IRQ_EN_EP0_IE) + + +/****************************************************************************** + * + * Following macro directives are to be used for decoding the interrupt source + * Note that these directives map directly to the hardware bit definitions and + * cannot be modified to any other value. + * + *****************************************************************************/ +#define USBD_INT_SRC_TXN_DONE (0x0400u) /* non-EP0 TX done interrupt */ +#define USBD_INT_SRC_RXN_CNT (0x0200u) /* non-EP0 RX Count */ +#define USBD_INT_SRC_RXN_EOT (0x0100u) /* non-EP0 RX end of transfer */ +#define USBD_INT_SRC_SOF (0x0080u) /* Start-of-frame interrupt */ +#define USBD_INT_SRC_EPN_RX (0x0020u) /* non-EP0 RX interrupt */ +#define USBD_INT_SRC_EPN_TX (0x0010u) /* non-EP0 TX interrupt */ +#define USBD_INT_SRC_DS_CHG (0x0008u) /* Device State change interrupt */ +#define USBD_INT_SRC_SETUP (0x0004u) /* Setup interrupt */ +#define USBD_INT_SRC_EP0_RX (0x0002u) /* EP0 RX Interrupt */ +#define USBD_INT_SRC_EP0_TX (0x0001u) /* EP0 TX Interrupt */ + + +/****************************************************************************** + * + * These values are used to indicate which endpoint to access. + * + *****************************************************************************/ +#define USB_EP_0 0x00000000u /* Endpoint 0 */ +#define USB_EP_1 0x00000010u /* Endpoint 1 */ +#define USB_EP_2 0x00000020u /* Endpoint 2 */ +#define USB_EP_3 0x00000030u /* Endpoint 3 */ +#define USB_EP_4 0x00000040u /* Endpoint 4 */ +#define USB_EP_5 0x00000050u /* Endpoint 5 */ +#define USB_EP_6 0x00000060u /* Endpoint 6 */ +#define USB_EP_7 0x00000070u /* Endpoint 7 */ +#define USB_EP_8 0x00000080u /* Endpoint 8 */ +#define USB_EP_9 0x00000090u /* Endpoint 9 */ +#define USB_EP_10 0x000000A0u /* Endpoint 10 */ +#define USB_EP_11 0x000000B0u /* Endpoint 11 */ +#define USB_EP_12 0x000000C0u /* Endpoint 12 */ +#define USB_EP_13 0x000000D0u /* Endpoint 13 */ +#define USB_EP_14 0x000000E0u /* Endpoint 14 */ +#define USB_EP_15 0x000000F0u /* Endpoint 15 */ +#define NUM_USB_EP 16u /* Number of supported endpoints */ + + +/****************************************************************************** + * + * The following are values that can be passed to USBHostEndpointConfig() and + * USBDevEndpointConfigSet() as the ulFlags parameter. + * + *****************************************************************************/ +#define USB_EP_AUTO_SET 0x00000001u /* Auto set feature enabled */ +#define USB_EP_AUTO_REQUEST 0x00000002u /* Auto request feature enabled */ +#define USB_EP_AUTO_CLEAR 0x00000004u /* Auto clear feature enabled */ +#define USB_EP_DMA_MODE_0 0x00000008u /* Enable DMA access using mode 0 */ +#define USB_EP_DMA_MODE_1 0x00000010u /* Enable DMA access using mode 1 */ +#define USB_EP_MODE_ISOC 0x00000000u /* Isochronous endpoint */ +#define USB_EP_MODE_BULK 0x00000100u /* Bulk endpoint */ +#define USB_EP_MODE_INT 0x00000200u /* Interrupt endpoint */ +#define USB_EP_MODE_CTRL 0x00000300u /* Control endpoint */ +#define USB_EP_MODE_MASK 0x00000300u /* Mode Mask */ +#define USB_EP_SPEED_LOW 0x00000000u /* Low Speed */ +#define USB_EP_SPEED_FULL 0x00001000u /* Full Speed */ + + +/****************************************************************************** + * + * The following are values that are returned from USBEndpointStatus(). The + * USB_HOST_* values are used when the USB controller is in host mode and the + * USB_DEV_* values are used when the USB controller is in device mode. + * + *****************************************************************************/ +#define USB_DEV_EP0_OUT_PKTRDY 0x00000001u /* Receive data packet ready */ +#define USB_DEV_RX_PKT_RDY 0x00010000u /* Data packet ready */ +#define USB_DEV_TX_TXPKTRDY 0x00000001u +#define USB_DEV_TX_FIFO_NE 0x00000002u + + +/****************************************************************************** + * + * This value specifies the maximum size of transfers on endpoint 0 as 64 + * bytes. This value is fixed in hardware as the FIFO size for endpoint 0. + * + *****************************************************************************/ +#define MAX_PACKET_SIZE_EP0 64u + + +/****************************************************************************** + * + * Macros for hardware access, both direct and via the bit-band region. + * + *****************************************************************************/ +#define HWREG(x) (*((volatile uint32_t *)(x))) + + + + +/****************************************************************************** + * + * Initialize the USB Device + * + * \param ulBase specifies the USB module base address. + * \param usFlags specifies the bus/self powered and endianness for data & dma. + * Should be a combination of the following flags + * USBD_PWR_BUS_PWR or USBD_PWR_SELF_PWR + * USBD_DATA_ENDIAN_LITTLE or USBD_DATA_ENDIAN_BIG + * USBD_DMA_ENDIAN_LITTLE or USBD_DMA_ENDIAN_BIG + * \param usFifoPtr specifies the start of the EP0 FIFO. + * + * This function will initialize the USB Device controller specified by the + * \e ulBase parameter. + * + * \return None + * + * Note This function does not intiate a device connect (pull ups are + * not enabled). Also the EP0 is intialized with FIFO size of 64Bytes. + * + * + *****************************************************************************/ +void USBDevInit(uint32 ulBase, uint16 usFlags, uint16 usFifoPtr); + + +/****************************************************************************** + * + * Initialize the USB Device's EP0 + * + * \param ulBase specifies the USB module base address. + * \param usSize FIFO size. Supported values are USB_FIFO_SZ_8/USB_FIFO_SZ_16/ + * USB_FIFO_SZ_32/USB_FIFO_SZ_64. + * \param usFifoPtr specifies the start of the EP0 FIFO. + * + * This function will initialize the USB Device controller specified by the + * \e ulBase parameter. The \e uFlags parameter is not used by this + * implementation. + * + * \return None + * + * + *****************************************************************************/ +void USBDevEp0Config(uint32 ulBase, uint16 usSize, uint16 usFifoPtr); + + +/****************************************************************************** + * + * Disable control interrupts on a given USB device controller. + * + * \param ulBase specifies the USB module base address. + * \param usFlags specifies which control interrupts to disable. + * + * This function will disable the interrupts for the USB device controller + * specified by the \e ulBase parameter. The \e usFlags parameter specifies + * which control interrupts to disable. The flags passed in the \e usFlags + * parameters should be the definitions that start with \b USBD_INT_EN_* + * + * \return None. + * + *****************************************************************************/ +void USBIntDisable(uint32 ulBase, uint16 usFlags); + + +/****************************************************************************** + * + * Enable control interrupts on a given USB device controller. + * + * \param ulBase specifies the USB module base address. + * \param usFlags specifies which control interrupts to enable. + * + * This function will enable the control interrupts for the USB device controller + * specified by the \e ulBase parameter. The \e usFlags parameter specifies + * which control interrupts to enable. The flags passed in the \e usFlags + * parameters should be the definitions that start with \b USBD_INT_EN_* and + * not any other \b USB_INT flags. + * + * \return None. + * + *****************************************************************************/ +void USBIntEnable(uint32 ulBase, uint16 usFlags); + + +/****************************************************************************** + * + * Returns the control interrupt status on a given USB device controller. + * + * \param ulBase specifies the USB module base address. + * + * This function will read interrupt status for a USB device controller. + * The bit values returned should be compared against the \b USBD_INT_SRC_* + * values. + * + * \return Returns the status of the control interrupts for a USB device controller. + * + *****************************************************************************/ +uint16 USBIntStatus(uint32 ulBase); + + +/****************************************************************************** + * + * Stalls the specified endpoint in device mode. + * + * \param ulBase specifies the USB module base address. + * \param usEndpoint specifies the endpoint to stall. + * \param usFlags specifies whether to stall the IN or OUT endpoint. + * + * This function will cause to endpoint number passed in to go into a stall + * condition. If the \e usFlags parameter is \b USB_EP_DEV_IN then the stall + * will be issued on the IN portion of this endpoint. If the \e usFlags + * parameter is \b USB_EP_DEV_OUT then the stall will be issued on the OUT + * portion of this endpoint. + * + * \note This function should only be called in device mode. + * + * \return None. + * + *****************************************************************************/ +void USBDevEndpointStall(uint32 ulBase, uint16 usEndpoint, uint16 usFlags); + + +/****************************************************************************** + * + * Clears the stall condition on the specified endpoint in device mode. + * + * \param ulBase specifies the USB module base address. + * \param usEndpoint specifies which endpoint to remove the stall condition. + * \param usFlags specifies whether to remove the stall condition from the IN + * or the OUT portion of this endpoint. + * + * This function will cause the endpoint number passed in to exit the stall + * condition. If the \e usFlags parameter is \b USB_EP_DEV_IN then the stall + * will be cleared on the IN portion of this endpoint. If the \e usFlags + * parameter is \b USB_EP_DEV_OUT then the stall will be cleared on the OUT + * portion of this endpoint. + * + * \note This function should only be called in device mode. + * + * \return None. + * + *****************************************************************************/ +void USBDevEndpointStallClear(uint32 ulBase, uint16 usEndpoint, uint16 usFlags); + + +/****************************************************************************** + * + * Connects the USB device controller to the bus in device mode. + * + * \param ulBase specifies the USB module base address. + * + * This function will cause the soft connect feature of the USB device controller to + * be enabled. Call USBDisconnect() to remove the USB device from the bus. + * + * + * \return None. + * + *****************************************************************************/ +void USBDevConnect(uint32 ulBase); + + +/****************************************************************************** + * + * Removes the USB device controller from the bus in device mode. + * + * \param ulBase specifies the USB module base address. + * + * This function will cause the soft disconnect feature of the USB device controller to + * remove the device from the USB bus. A call to USBDevConnect() is needed to + * reconnect to the bus. + * + * + * \return None. + * + *****************************************************************************/ +void USBDevDisconnect(uint32 ulBase); + + +/****************************************************************************** + * + * Sets the address in device mode. + * + * \param ulBase specifies the USB module base address. + * \param ulAddress is the address to use for a device. + * + * This function will set the device address on the USB bus. This address was + * likely received via a SET ADDRESS command from the host controller. + * + * \note This function is not available on this controller. This is maintained + * for compatibility. + * + * \return None. + * + *****************************************************************************/ +void USBDevAddrSet(uint32 ulBase, uint32 ulAddress); + + +/****************************************************************************** + * + * Determine the number of bytes of data available in a given endpoint's FIFO. + * + * \param ulBase specifies the USB module base address. + * \param usEndpoint is the endpoint to access. + * + * This function will return the number of bytes of data currently available + * in the FIFO for the given receive (OUT) endpoint. It may be used prior to + * calling USBEndpointDataGet() to determine the size of buffer required to + * hold the newly-received packet. + * + * \return This call will return the number of bytes available in a given + * endpoint FIFO. + * + *****************************************************************************/ +uint16 USBEndpointDataAvail(uint32 ulBase, uint16 usEndpoint); + + +/****************************************************************************** + * + * Retrieves data from the given endpoint's FIFO. + * + * \param ulBase specifies the USB module base address. + * \param usEndpoint is the endpoint to access. + * \param pucData is a pointer to the data area used to return the data from + * the FIFO. + * \param pulSize is initially the size of the buffer passed into this call + * via the \e pucData parameter. It will be set to the amount of data + * returned in the buffer. + * + * This function will return the data from the FIFO for the given endpoint. + * The \e pulSize parameter should indicate the size of the buffer passed in + * the \e pulData parameter. The data in the \e pulSize parameter will be + * changed to match the amount of data returned in the \e pucData parameter. + * If a zero byte packet was received this call will not return a error but + * will instead just return a zero in the \e pulSize parameter. The only + * error case occurs when there is no data packet available. + * + * \return This call will return 0, or -1 if no packet was received. + * + *****************************************************************************/ +sint32 USBEndpointDataGet( + uint32 ulBase, + uint16 usEndpoint, + uint8 * pucData, + uint32 * pulSize); + + +/****************************************************************************** + * + * Retrieves the setup packet from EP0 Setup FIFO + * + * \param ulBase specifies the USB module base address. + * \param sPkt Pointer to the data area for storing the setup packet. + * Atleast 8 bytes should be available. + * \param pusPktSize On return this contains the size of the setup packet (8Bytes) + * + * This function will retrieves the 8Byte long setup packet from the EP0 setup + * FIFO. + * + * \return None. + * + *****************************************************************************/ +void USBDevGetSetupPacket (uint32 ulBase, uint8 * sPkt, uint16 * pusPktSize); + + +/****************************************************************************** + * + * Acknowledge that data was read from the given endpoint's FIFO in device + * mode. + * + * \param ulBase specifies the USB module base address. + * \param usEndpoint is the endpoint to access. + * \param bIsLastPacket This parameter is not used. + * + * This function acknowledges that the data was read from the endpoint's FIFO. + * The \e bIsLastPacket parameter is set to a \b true value if this is the + * last in a series of data packets on endpoint zero. The \e bIsLastPacket + * parameter is not used for endpoints other than endpoint zero. This call + * can be used if processing is required between reading the data and + * acknowledging that the data has been read. + * + * + * \return None. + * + *****************************************************************************/ +void USBDevEndpointDataAck(uint32 ulBase, uint16 usEndpoint, tBoolean bIsLastPacket); + + +/****************************************************************************** + * + * Puts data into the given endpoint's FIFO. + * + * \param ulBase specifies the USB module base address. + * \param usEndpoint is the endpoint to access. + * \param pucData is a pointer to the data area used as the source for the + * data to put into the FIFO. + * \param ulSize is the amount of data to put into the FIFO. + * + * This function will put the data from the \e pucData parameter into the FIFO + * for this endpoint. If a packet is already pending for transmission then + * this call will not put any of the data into the FIFO and will return -1. + * Care should be taken to not write more data than can fit into the FIFO + * allocated by the call to USBFIFOConfig(). + * + * \return This call will return 0 on success, or -1 to indicate that the FIFO + * is in use and cannot be written. + * + *****************************************************************************/ +uint32 USBEndpointDataPut( + uint32 ulBase, + uint16 usEndpoint, + uint8 * pucData, + uint32 ulSize); + +/****************************************************************************** + * + * Starts the transfer of data from an endpoint's FIFO. + * + * \param ulBase specifies the USB module base address. + * \param usEndpoint is the endpoint to access. + * \param ulTransType Not used. + * + * This function will start the transfer of data from the FIFO for a given + * endpoint. + * + * \return This call will return 0 on success, or -1 if a transmission is + * already in progress. + * + *****************************************************************************/ +uint32 USBEndpointDataSend(uint32 ulBase, uint16 usEndpoint, uint32 ulTransType); + + +/****************************************************************************** + * + * Resets the USB Device Controller + * + * \param void + * + * \return None. + * + * \note Since the USB Device reset is handled by the host, this is a dummy + * function & maintained for compatibility purpose. + * + *****************************************************************************/ +void USBReset(void); + + +/****************************************************************************** + * + * Sets the FIFO configuration for an endpoint. + * + * \param ulBase specifies the USB module base address. + * \param usEndpoint is the endpoint to access. + * \param uFIFOAddress is the starting address for the FIFO. + * \param uFIFOSize is the size of the FIFO in bytes. + * \param uFlags specifies what information to set in the FIFO configuration. + * + * This function will set the starting FIFO RAM address and size of the FIFO + * for a given endpoint. Endpoint zero does not have a dynamically + * configurable FIFO so this function should not be called for endpoint zero. + * The \e uFIFOSize parameter should be one of the values in the + * \b USB_FIFO_SZ_ values. If the endpoint is going to use double buffering + * it should use the values with the \b _DB at the end of the value. For + * example, use \b USB_FIFO_SZ_16_DB to configure an endpoint to have a 16 + * byte double buffered FIFO. If a double buffered FIFO is used, then the + * actual size of the FIFO will be twice the size indicated by the + * \e uFIFOSize parameter. This means that the \b USB_FIFO_SZ_16_DB value + * will use 32 bytes of the USB controller's FIFO memory. + * + * The \e uFIFOAddress value should be a multiple of 8 bytes and directly + * indicates the starting address in the USB controller's FIFO RAM. For + * example, a value of 64 indicates that the FIFO should start 64 bytes into + * the USB controller's FIFO memory. The \e uFlags value specifies whether + * the endpoint's OUT or IN FIFO should be configured. If in host mode, use + * \b USB_EP_HOST_OUT or \b USB_EP_HOST_IN, and if in device mode use + * \b USB_EP_DEV_OUT or \b USB_EP_DEV_IN. + * + * \return None. + * + *****************************************************************************/ +void USBFIFOConfigSet(uint32 ulBase, uint32 usEndpoint, uint32 uFIFOAddress, uint32 uFIFOSize, uint16 uFlags); + + +/****************************************************************************** + * + * Gets the current configuration for an endpoint. + * + * \param ulBase specifies the USB module base address. + * \param usEndpoint is the endpoint to access. + * \param pulMaxPacketSize is a pointer which will be written with the + * maximum packet size for this endpoint. + * \param puFlags is a pointer which will be written with the current + * endpoint settings. On entry to the function, this pointer must contain + * either \b USB_EP_DEV_IN or \b USB_EP_DEV_OUT to indicate whether the IN or + * OUT endpoint is to be queried. + * + * This function will return the basic configuration for an endpoint in device + * mode. The values returned in \e *pulMaxPacketSize and \e *puFlags are + * equivalent to the \e ulMaxPacketSize and \e uFlags previously passed to + * USBDevEndpointConfigSet() for this endpoint. + * + * \note This function should only be called in device mode. + * + * \return None. + * + *****************************************************************************/ +void USBDevEndpointConfigGet( + uint32 ulBase, + uint16 usEndpoint, + uint32 * pulMaxPacketSize, + uint32 * puFlags); + + +/****************************************************************************** + * + * Sets the configuration for an endpoint. + * + * \param ulBase specifies the USB module base address. + * \param usEndpoint is the endpoint to access. + * \param ulMaxPacketSize is the maximum packet size for this endpoint. + * \param uFlags are used to configure other endpoint settings. + * + * This function will set the basic configuration for an endpoint in device + * mode. Endpoint zero does not have a dynamic configuration, so this + * function should not be called for endpoint zero. The \e uFlags parameter + * determines some of the configuration while the other parameters provide the + * rest. + * + * The \b USB_EP_MODE_ flags define what the type is for the given endpoint. + * + * - \b USB_EP_MODE_CTRL is a control endpoint. + * - \b USB_EP_MODE_ISOC is an isochronous endpoint. + * - \b USB_EP_MODE_BULK is a bulk endpoint. + * - \b USB_EP_MODE_INT is an interrupt endpoint. + * + * + * \note This function should only be called in device mode. + * + * \return None. + * + *****************************************************************************/ +void USBDevEndpointConfigSet(uint32 ulBase, uint16 usEndpoint, uint32 ulMaxPacketSize, uint32 uFlags); + +void USBDevSetDevCfg(uint32 ulBase); +void USBDevClearDevCfg(uint32 ulBase); +uint16 USBDevGetEPnStat(uint32 ulBase); +void USBDevPullEnableDisable(uint32 ulBase, uint32 ulSet); +void USBIntStatusClear (uint16 uFlag); +uint16 USBDevGetDevStat(uint32 ulBase); +void USBDevCfgUnlock(uint32 ulBase); +void USBDevCfgLock(uint32 ulBase); + +#endif /*USB_H_*/ + + + + diff --git a/include/arch/rm46l8lp/halcogen/usb_serial_structs.h b/include/arch/rm46l8lp/halcogen/usb_serial_structs.h new file mode 100644 index 0000000..f970698 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/usb_serial_structs.h @@ -0,0 +1,74 @@ +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +/** + * @file usb_serial_structs.h + * + * @brief Data structures defining this USB CDC device. + * + */ + +#ifndef _USB_SERIAL_STRUCTS_H_ +#define _USB_SERIAL_STRUCTS_H_ + +/****************************************************************************** + * + * The size of the transmit and receive buffers used for the redirected UART. + * This number should be a power of 2 for best performance. 256 is chosen + * pretty much at random though the buffer should be at least twice the size of + * a maxmum-sized USB packet. + * + *****************************************************************************/ +#define UART_BUFFER_SIZE 0x0001 + +/** *************************************************************************** + * + * CDC device callback function prototypes. + * + *****************************************************************************/ +uint32 RxHandler(void *pvCBData, uint32 ulEvent, + uint32 ulMsgValue, void *pvMsgData); +uint32 TxHandler(void *pvCBData, uint32 ulEvent, + uint32 ulMsgValue, void *pvMsgData); +uint32 ControlHandler(void *pvCBData, uint32 ulEvent, + uint32 ulMsgValue, void *pvMsgData); + +extern const tUSBBuffer g_sTxBuffer; +extern const tUSBBuffer g_sRxBuffer; +extern const tUSBDCDCDevice g_sCDCDevice; +extern uint8 g_pucUSBTxBuffer[]; +extern uint8 g_pucUSBRxBuffer[]; + +#endif diff --git a/include/arch/rm46l8lp/halcogen/usbcdc.h b/include/arch/rm46l8lp/halcogen/usbcdc.h new file mode 100644 index 0000000..4e71e94 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/usbcdc.h @@ -0,0 +1,742 @@ +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +/****************************************************************************** + * + * Note: This header contains definitions related to the USB Communication + * Device Class specification. The header is complete for ACM model + * devices but request and notification definitions specific to other + * modem types, ISDN, ATM and Ethernet are currently incomplete or + * omitted. + * + *****************************************************************************/ + +#ifndef __USBCDC_H__ +#define __USBCDC_H__ + +/****************************************************************************** + * + * If building with a C++ compiler, make all of the definitions in this header + * have a C binding. + * + *****************************************************************************/ +#ifdef __cplusplus +extern "C" +{ +#endif + +/****************************************************************************** + * + * \ingroup cdc_device_class_api + * @{ + * + *****************************************************************************/ + +/****************************************************************************** + * + * Generic macros to read a byte, word or long from a character pointer. + * + *****************************************************************************/ +/* #define BYTE(pucData) (*(uint8 *)(pucData)) +#define SHORT(pucData) (*(uint16 *)(pucData)) +#define LONG(pucData) (*(uint32 *)(pucData)) */ + +/****************************************************************************** + * + * USB CDC subclass codes. Used in interface descriptor, bInterfaceClass + * + *****************************************************************************/ +#define USB_CDC_SUBCLASS_DIRECT_LINE_MODEL 0x01 +#define USB_CDC_SUBCLASS_ABSTRACT_MODEL 0x02 +#define USB_CDC_SUBCLASS_TELEPHONE_MODEL 0x03 +#define USB_CDC_SUBCLASS_MULTI_CHANNEL_MODEL 0x04 +#define USB_CDC_SUBCLASS_CAPI_MODEL 0x05 +#define USB_CDC_SUBCLASS_ETHERNET_MODEL 0x06 +#define USB_CDC_SUBCLASS_ATM_MODEL 0x07 + +/****************************************************************************** + * + * USB CDC control interface protocols. Used in control interface descriptor, + * bInterfaceProtocol + * + *****************************************************************************/ +#define USB_CDC_PROTOCOL_NONE 0x00 +#define USB_CDC_PROTOCOL_V25TER 0x01 +#define USB_CDC_PROTOCOL_VENDOR 0xFF + +/****************************************************************************** + * + * USB CDC data interface protocols. Used in data interface descriptor, + * bInterfaceProtocol + * + *****************************************************************************/ +/* USB_CDC_PROTOCOL_NONE 0x00 */ +#define USB_CDC_PROTOCOL_I420 0x30 +#define USB_CDC_PROTOCOL_TRANSPARENT 0x32 +#define USB_CDC_PROTOCOL_Q921M 0x50 +#define USB_CDC_PROTOCOL_Q921 0x51 +#define USB_CDC_PROTOCOL_Q921TM 0x52 +#define USB_CDC_PROTOCOL_V42BIS 0x90 +#define USB_CDC_PROTOCOL_Q921EURO 0x91 +#define USB_CDC_PROTOCOL_V120 0x92 +#define USB_CDC_PROTOCOL_CAPI20 0x93 +#define USB_CDC_PROTOCOL_HOST_DRIVER 0xFD +#define USB_CDC_PROTOCOL_CDC_SPEC 0xFE +/* USB_CDC_PROTOCOL_VENDOR 0xFF */ + +/****************************************************************************** + * + * Functional descriptor definitions + * + *****************************************************************************/ + +/****************************************************************************** + * + * Functional descriptor types + * + *****************************************************************************/ +#define USB_CDC_CS_INTERFACE 0x24 +#define USB_CDC_CS_ENDPOINT 0x25 + +/****************************************************************************** + * + * Functional descriptor subtypes + * + *****************************************************************************/ +#define USB_CDC_FD_SUBTYPE_HEADER 0x00 +#define USB_CDC_FD_SUBTYPE_CALL_MGMT 0x01 +#define USB_CDC_FD_SUBTYPE_ABSTRACT_CTL_MGMT 0x02 +#define USB_CDC_FD_SUBTYPE_DIRECT_LINE_MGMT 0x03 +#define USB_CDC_FD_SUBTYPE_TELEPHONE_RINGER 0x04 +#define USB_CDC_FD_SUBTYPE_LINE_STATE_CAPS 0x05 +#define USB_CDC_FD_SUBTYPE_UNION 0x06 +#define USB_CDC_FD_SUBTYPE_COUNTRY 0x07 +#define USB_CDC_FD_SUBTYPE_TELEPHONE_MODES 0x08 +#define USB_CDC_FD_SUBTYPE_USB_TERMINAL 0x09 +#define USB_CDC_FD_SUBTYPE_NETWORK_TERMINAL 0x0A +#define USB_CDC_FD_SUBTYPE_PROTOCOL_UNIT 0x0B +#define USB_CDC_FD_SUBTYPE_EXTENSION_UNIT 0x0C +#define USB_CDC_FD_SUBTYPE_MULTI_CHANNEL_MGMT 0x0D +#define USB_CDC_FD_SUBTYPE_CAPI_MGMT 0x0E +#define USB_CDC_FD_SUBTYPE_ETHERNET 0x0F +#define USB_CDC_FD_SUBTYPE_ATM 0x10 + +/****************************************************************************** + * + * USB_CDC_FD_SUBTYPE_CALL_MGMT, Header functional descriptor, bmCapabilities + * + *****************************************************************************/ +#define USB_CDC_CALL_MGMT_VIA_DATA 0x02 +#define USB_CDC_CALL_MGMT_HANDLED 0x01 + +/****************************************************************************** + * + * USB_CDC_FD_SUBTYPE_ABSTRACT_CTL_MGMT, Abstract Control Management functional + * descriptor, bmCapabilities + * + *****************************************************************************/ +#define USB_CDC_ACM_SUPPORTS_NETWORK_CONNECTION 0x08 +#define USB_CDC_ACM_SUPPORTS_SEND_BREAK 0x04 +#define USB_CDC_ACM_SUPPORTS_LINE_PARAMS 0x02 +#define USB_CDC_ACM_SUPPORTS_COMM_FEATURE 0x01 + +/****************************************************************************** + * + * USB_CDC_FD_SUBTYPE_DIRECT_LINE_MGMT, Direct Line Management functional + * descriptor, bmCapabilities + * + *****************************************************************************/ +#define USB_CDC_DLM_NEEDS_EXTRA_PULSE_SETUP 0x04 +#define USB_CDC_DLM_SUPPORTS_AUX 0x02 +#define USB_CDC_DLM_SUPPORTS_PULSE 0x01 + +/****************************************************************************** + * + * USB_CDC_FD_SUBTYPE_TELEPHONE_MODES, Telephone Operational Modes functional + * descriptor, bmCapabilities + * + *****************************************************************************/ +#define USB_CDC_TELEPHONE_SUPPORTS_COMPUTER 0x04 +#define USB_CDC_TELEPHONE_SUPPORTS_STANDALONE 0x02 +#define USB_CDC_TELEPHONE_SUPPORTS_SIMPLE 0x01 + +/****************************************************************************** + * + * USB_CDC_FD_SUBTYPE_LINE_STATE_CAPS, Telephone Call and Line State Reporting + * Capabilities descriptor + * + *****************************************************************************/ +#define USB_CDC_LINE_STATE_CHANGES_NOTIFIED 0x20 +#define USB_CDC_LINE_STATE_REPORTS_DTMF 0x10 +#define USB_CDC_LINE_STATE_REPORTS_DIST_RING 0x08 +#define USB_CDC_LINE_STATE_REPORTS_CALLERID 0x04 +#define USB_CDC_LINE_STATE_REPORTS_BUSY 0x02 +#define USB_CDC_LINE_STATE_REPORTS_INT_DIALTONE 0x01 + +/****************************************************************************** + * + * USB_CDC_FD_SUBTYPE_USB_TERMINAL, USB Terminal functional descriptor, + * bmOptions + * + *****************************************************************************/ +#define USB_CDC_TERMINAL_NO_WRAPPER_USED 0x00 +#define USB_CDC_TERMINAL_WRAPPER_USED 0x01 + +/****************************************************************************** + * + * USB_CDC_FD_SUBTYPE_MULTI_CHANNEL_MGMT, Multi-Channel Management functional + * descriptor, bmCapabilities + * + *****************************************************************************/ +#define USB_CDC_MCM_SUPPORTS_SET_UNIT_PARAM 0x04 +#define USB_CDC_MCM_SUPPORTS_CLEAR_UNIT_PARAM 0x02 +#define USB_CDC_MCM_UNIT_PARAMS_NON_VOLATILE 0x01 + +/****************************************************************************** + * + * USB_CDC_FD_SUBTYPE_CAPI_MGMT, CAPI Control Management functional descriptor, + * bmCapabilities + * + *****************************************************************************/ +#define USB_CDC_CAPI_INTELLIGENT 0x01 +#define USB_CDC_CAPI_SIMPLE 0x00 + +/****************************************************************************** + * + * USB_CDC_FD_SUBTYPE_ETHERNET, Ethernet Networking functional descriptor, + * bmEthernetStatistics + * + *****************************************************************************/ +#define USB_CDC_ENET_XMIT_OK 0x01000000U +#define USB_CDC_ENET_RCV_OK 0x02000000U +#define USB_CDC_ENET_XMIT_ERROR 0x04000000U +#define USB_CDC_ENET_RCV_ERROR 0x08000000U +#define USB_CDC_ENET_RCV_NO_BUFFER 0x10000000U +#define USB_CDC_ENET_DIRECTED_BYTES_XMIT 0x20000000U +#define USB_CDC_ENET_DIRECTED_FRAMES_XMIT 0x40000000U +#define USB_CDC_ENET_MULTICAST_BYTES_XMIT 0x80000000U +#define USB_CDC_ENET_MULTICAST_FRAMES_XMIT 0x00010000U +#define USB_CDC_ENET_BROADCAST_BYTES_XMIT 0x00020000U +#define USB_CDC_ENET_BROADCAST_FRAMES_XMIT 0x00040000U +#define USB_CDC_ENET_DIRECTED_BYTES_RCV 0x00080000U +#define USB_CDC_ENET_DIRECTED_FRAMES_RCV 0x00100000U +#define USB_CDC_ENET_MULTICAST_BYTES_RCV 0x00200000U +#define USB_CDC_ENET_MULTICAST_FRAMES_RCV 0x00400000U +#define USB_CDC_ENET_BROADCAST_BYTES_RCV 0x00800000U +#define USB_CDC_ENET_BROADCAST_FRAMES_RCV 0x00000100U +#define USB_CDC_ENET_RCV_CRC_ERROR 0x00000200U +#define USB_CDC_ENET_TRANSMIT_QUEUE_LENGTH 0x00000400U +#define USB_CDC_ENET_RCV_ERROR_ALIGNMENT 0x00000800U +#define USB_CDC_ENET_XMIT_ONE_COLLISION 0x00001000U +#define USB_CDC_ENET_XMIT_MORE_COLLISIONS 0x00002000U +#define USB_CDC_ENET_XMIT_DEFERRED 0x00004000U +#define USB_CDC_ENET_XMIT_MAX_COLLISIONS 0x00008000U +#define USB_CDC_ENET_RCV_OVERRUN 0x00000001U +#define USB_CDC_ENET_XMIT_UNDERRUN 0x00000002U +#define USB_CDC_ENET_XMIT_HEARTBEAT_FAILURE 0x00000004U +#define USB_CDC_ENET_XMIT_TIMES_CRS_LOST 0x00000008U +#define USB_CDC_ENET_XMIT_LATE_COLLISIONS 0x00000010U + +/****************************************************************************** + * + * USB_CDC_FD_SUBTYPE_ATM, ATM Networking functional descriptor, + * bmDataCapabilities + * + *****************************************************************************/ +#define USB_CDC_ATM_TYPE_3 0x08 +#define USB_CDC_ATM_TYPE_2 0x04 +#define USB_CDC_ATM_TYPE_1 0x02 + +/****************************************************************************** + * + * bmATMDeviceStatistics + * + *****************************************************************************/ +#define USB_CDC_ATM_VC_US_CELLS_SENT 0x10 +#define USB_CDC_ATM_VC_US_CELLS_RECEIVED 0x08 +#define USB_CDC_ATM_DS_CELLS_HEC_ERR_CORRECTED 0x04 +#define USB_CDC_ATM_US_CELLS_SENT 0x02 +#define USB_CDC_ATM_US_CELLS_RECEIVED 0x01 + +/****************************************************************************** + * + * Management Element Requests (provided in tUSBRequest.ucRequest) + * + *****************************************************************************/ +#define USB_CDC_SEND_ENCAPSULATED_COMMAND 0x00u +#define USB_CDC_GET_ENCAPSULATED_RESPONSE 0x01u +#define USB_CDC_SET_COMM_FEATURE 0x02u +#define USB_CDC_GET_COMM_FEATURE 0x03u +#define USB_CDC_CLEAR_COMM_FEATURE 0x04u +#define USB_CDC_SET_AUX_LINE_STATE 0x10u +#define USB_CDC_SET_HOOK_STATE 0x11u +#define USB_CDC_PULSE_SETUP 0x12u +#define USB_CDC_SEND_PULSE 0x13u +#define USB_CDC_SET_PULSE_TIME 0x14u +#define USB_CDC_RING_AUX_JACK 0x15u +#define USB_CDC_SET_LINE_CODING 0x20u +#define USB_CDC_GET_LINE_CODING 0x21u +#define USB_CDC_SET_CONTROL_LINE_STATE 0x22u +#define USB_CDC_SEND_BREAK 0x23u +#define USB_CDC_SET_RINGER_PARMS 0x30u +#define USB_CDC_GET_RINGER_PARMS 0x31u +#define USB_CDC_SET_OPERATION_PARMS 0x32u +#define USB_CDC_GET_OPERATION_PARMS 0x33u +#define USB_CDC_SET_LINE_PARMS 0x34u +#define USB_CDC_GET_LINE_PARMS 0x35u +#define USB_CDC_DIAL_DIGITS 0x36u +#define USB_CDC_SET_UNIT_PARAMETER 0x37u +#define USB_CDC_GET_UNIT_PARAMETER 0x38u +#define USB_CDC_CLEAR_UNIT_PARAMETER 0x39u +#define USB_CDC_GET_PROFILE 0x3Au +#define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40u +#define USB_CDC_SET_ETHERNET_POWER_MANAGEMENT_PATTERN_FILTER 0x41u +#define USB_CDC_GET_ETHERNET_POWER_MANAGEMENT_PATTERN_FILTER 0x42u +#define USB_CDC_SET_ETHERNET_PACKET_FILTER 0x43u +#define USB_CDC_GET_ETHERNET_STATISTIC 0x44u +#define USB_CDC_SET_ATM_DATA_FORMAT 0x50u +#define USB_CDC_GET_ATM_DEVICE_STATISTICS 0x51u +#define USB_CDC_SET_ATM_DEFAULT_VC 0x52u +#define USB_CDC_GET_ATM_VC_STATISTICS 0x53u + +/****************************************************************************** + * + * In cases where a request defined above results in the return of a fixed size + * data block, the following group of labels define the size of that block. In + * each of these cases, an access macro is also provided to write the response + * data into an appropriately-sized array of uint8acters. + * + *****************************************************************************/ +#define USB_CDC_SIZE_COMM_FEATURE 2 +#define USB_CDC_SIZE_LINE_CODING 7 +#define USB_CDC_SIZE_RINGER_PARMS 4 +#define USB_CDC_SIZE_OPERATION_PARMS 2 +#define USB_CDC_SIZE_UNIT_PARAMETER 2 +#define USB_CDC_SIZE_PROFILE 64 +#define USB_CDC_SIZE_ETHERNET_POWER_MANAGEMENT_PATTERN_FILTER 2 +#define USB_CDC_SIZE_ETHERNET_STATISTIC 4 +#define USB_CDC_SIZE_ATM_DEVICE_STATISTICS 4 +#define USB_CDC_SIZE_ATM_VC_STATISTICS 4 +#define USB_CDC_SIZE_LINE_PARMS 10 + +/****************************************************************************** + * + * NB: USB_CDC_SIZE_LINE_PARAMS assumes only a single call. For multiple + * calls, add 4 bytes per additional call. + * + *****************************************************************************/ + +/****************************************************************************** + * + * USB_CDC_GET_COMM_FEATURE & USB_CDC_SET_COMM_FEATURE + * + *****************************************************************************/ + +/****************************************************************************** + * + * wValue (Feature Selector) + * + *****************************************************************************/ +#define USB_CDC_ABSTRACT_STATE 0x0001 +#define USB_CDC_COUNTRY_SETTING 0x0002 + +/****************************************************************************** + * + * Data when feature selector is USB_DCD_ABSTRACT_STATE + * + *****************************************************************************/ +#define USB_CDC_ABSTRACT_CALL_DATA_MULTIPLEXED 0x0002 +#define USB_CDC_ABSTRACT_ENDPOINTS_IDLE 0x0001 + +/****************************************************************************** + * + * Macros to populate the response data buffer (whose size in bytes is defined + * by USB_CDC_SIZE_COMM_FEATURE). + * + *****************************************************************************/ +/* + * Add code for macro SetResponseCommFeature. + */ +/****************************************************************************** + * + * USB_CDC_SET_AUX_LINE_STATE, wValue + * + *****************************************************************************/ +#define USB_CDC_AUX_DISCONNECT 0x0000 +#define USB_CDC_AUX_CONNECT 0x0001 + +/****************************************************************************** + * + * USB_CDC_SET_HOOK_STATE, wValue + * + *****************************************************************************/ +#define USB_CDC_ON_HOOK 0x0000 +#define USB_CDC_OFF_HOOK 0x0001 +#define USB_CDC_SNOOPING 0x0002 + +/****************************************************************************** + * + * USB_CDC_GET_LINE_CODING + * + *****************************************************************************/ +#define USB_CDC_STOP_BITS_1 0x00 +#define USB_CDC_STOP_BITS_1_5 0x01 +#define USB_CDC_STOP_BITS_2 0x02 + +#define USB_CDC_PARITY_NONE 0x00 +#define USB_CDC_PARITY_ODD 0x01 +#define USB_CDC_PARITY_EVEN 0x02 +#define USB_CDC_PARITY_MARK 0x03 +#define USB_CDC_PARITY_SPACE 0x04 + +/****************************************************************************** + * + * Macro to populate the response data buffer (whose size in bytes is defined + * by USB_CDC_SIZE_LINE_CODING). + * + *****************************************************************************/ +/* + * Add code for macro SetResponseLineCoding. + */ +/****************************************************************************** + * + * USB_CDC_SET_CONTROL_LINE_STATE, wValue + * + *****************************************************************************/ +#define USB_CDC_DEACTIVATE_CARRIER 0x00 +#define USB_CDC_ACTIVATE_CARRIER 0x02 +#define USB_CDC_DTE_NOT_PRESENT 0x00 +#define USB_CDC_DTE_PRESENT 0x01 + +/****************************************************************************** + * + * USB_CDC_SET_RINGER_PARMS, USB_CDC_GET_RINGER_PARMS and + * USB_CDC_GET_LINE_PARMS (ulRingerBmp) + * + *****************************************************************************/ +#define USB_CDC_RINGER_EXISTS 0x80000000U +#define USB_CDC_RINGER_DOES_NOT_EXIST 0x00000000 + +/****************************************************************************** + * + * Macro to populate the response data buffer to USB_CDC_GET_RINGER_PARMS. + * Parameter buf points to a buffer of size USB_CDC_SIZE_RINGER_PARMS bytes. + * + *****************************************************************************/ +/* + * Add code for macro SetResponseRingerParms. + */ +/****************************************************************************** + * + * Macros to extract fields from the USB_CDC_SET_RINGER_PARMS data + * + *****************************************************************************/ +/* #define GetRingerVolume(pcData) (BYTE((pcData)+1)) */ +/* #define GetRingerPattern(pcData) (BYTE(pcData)) */ +/* #define GetRingerExists(pcData) ((LONG(pcData)) & USB_CDC_RINGER_EXISTS) */ + +/****************************************************************************** + * + * USB_CDC_SET_OPERATION_PARMS, wValue + * + *****************************************************************************/ +#define USB_CDC_SIMPLE_MODE 0x0000 +#define USB_CDC_STANDALONE_MODE 0x0001 +#define USB_CDC_HOST_CENTRIC_MODE 0x0002 + +/****************************************************************************** + * + * Macro to populate the response data buffer to USB_CDC_GET_OPERATION_PARMS. + * Parameter buf points to a buffer of size USB_CDC_SIZE_OPERATION_PARMS + * bytes. + * + *****************************************************************************/ +/* + * Add code for macro SetResponseOperationParms. + */ +/****************************************************************************** + * + * USB_CDC_SET_LINE_PARMS, wParam - Line State Change + * + *****************************************************************************/ +#define USB_CDC_DROP_ACTIVE_CALL 0x0000 +#define USB_CDC_START_NEW_CALL 0x0001 +#define USB_CDC_APPLY_RINGING 0x0002 +#define USB_CDC_REMOVE_RINGING 0x0003 +#define USB_CDC_SWITCH_CALL 0x0004 + +/****************************************************************************** + * + * Line state bitmap in USB_CDC_GET_LINE_PARMS response + * + *****************************************************************************/ +#define USB_CDC_LINE_IS_ACTIVE 0x80000000U +#define USB_CDC_LINE_IS_IDLE 0x00000000U +#define USB_CDC_LINE_NO_ACTIVE_CALL 0x000000FFU + +#define USB_CDC_CALL_ACTIVE 0x80000000U + +/****************************************************************************** + * + * Call state value definitions + * + *****************************************************************************/ +#define USB_CDC_CALL_IDLE 0x00000000 +#define USB_CDC_CALL_TYPICAL_DIALTONE 0x00000001 +#define USB_CDC_CALL_INTERRUPTED_DIALTONE 0x00000002 +#define USB_CDC_CALL_DIALING 0x00000003 +#define USB_CDC_CALL_RINGBACK 0x00000004 +#define USB_CDC_CALL_CONNECTED 0x00000005 +#define USB_CDC_CALL_INCOMING 0x00000006 + +/****************************************************************************** + * + * Call state change value definitions + * + *****************************************************************************/ +#define USB_CDC_CALL_STATE_IDLE 0x01 +#define USB_CDC_CALL_STATE_DIALING 0x02 +#define USB_CDC_CALL_STATE_RINGBACK 0x03 +#define USB_CDC_CALL_STATE_CONNECTED 0x04 +#define USB_CDC_CALL_STATE_INCOMING 0x05 + +/****************************************************************************** + * + * Extra byte of data describing the connection type for + * USB_CDC_CALL_STATE_CONNECTED. + * + *****************************************************************************/ +#define USB_CDC_VOICE 0x00 +#define USB_CDC_ANSWERING_MACHINE 0x01 +#define USB_CDC_FAX 0x02 +#define USB_CDC_MODEM 0x03 +#define USB_CDC_UNKNOWN 0xFF + +/****************************************************************************** + * + * Macro to extract call index from request in cases where wParam is + * USB_CDC_SWITCH_CALL. + * + *****************************************************************************/ +/* #define GetCallIndex(pcData) (BYTE(pcData)) */ + +/****************************************************************************** + * + * Macro to populate the CallState entries in response to request + * USB_CDC_GET_LINE_PARMS. The ucIndex parameter is a zero based index + * indicating which call entry in the pcBuf response buffer to fill in. Note + * that pcBuf points to the first byte of the buffer (the wLength field). + * + *****************************************************************************/ +/* + * Add code for macro SetResponseCallState. + */ +/****************************************************************************** + * + * Macro to populate the response data buffer (whose size in bytes is defined + * by USB_CDC_SIZE_LINE_PARMS). Note that this macro only populates fields for + * a single call. If multiple calls are being managed, additional 4 byte + * fields must be appended to provide call state for each call after the first. + * This may be done using the SetResponseCallState macro with the appropriate + * call index supplied. + * + *****************************************************************************/ +/* + * Add code for macro SetResponseLineParms. + */ +/****************************************************************************** + * + * Notification Element definitions + * + *****************************************************************************/ +#define USB_CDC_NOTIFY_NETWORK_CONNECTION 0x00 +#define USB_CDC_NOTIFY_RESPONSE_AVAILABLE 0x01 +#define USB_CDC_NOTIFY_AUX_JACK_HOOK_STATE 0x08 +#define USB_CDC_NOTIFY_RING_DETECT 0x09 +#define USB_CDC_NOTIFY_SERIAL_STATE 0x20 +#define USB_CDC_NOTIFY_CALL_STATE_CHANGE 0x28 +#define USB_CDC_NOTIFY_LINE_STATE_CHANGE 0x29 +#define USB_CDC_NOTIFY_CONNECTION_SPEED_CHANGE 0x2A + +/****************************************************************************** + * + * USB_CDC_NOTIFY_NETWORK_CONNECTION, wValue + * + *****************************************************************************/ +#define USB_CDC_NETWORK_DISCONNECTED 0x0000 +#define USB_CDC_NETWORK_CONNECTED 0x0001 + +/****************************************************************************** + * + * USB_CDC_NOTIFY_AUX_JACK_HOOK_STATE, wValue + * + *****************************************************************************/ +#define USB_CDC_AUX_JACK_ON_HOOK 0x0000 +#define USB_CDC_AUX_JACK_OFF_HOOK 0x0001 + +/****************************************************************************** + * + * USB_CDC_NOTIFY_SERIAL_STATE, Data + * + *****************************************************************************/ + +/****************************************************************************** + * + * Number of bytes of data returned alongside this notification. + * + *****************************************************************************/ +#define USB_CDC_NOTIFY_SERIAL_STATE_SIZE 2u + +#define USB_CDC_SERIAL_STATE_OVERRUN 0x0040U +#define USB_CDC_SERIAL_STATE_PARITY 0x0020U +#define USB_CDC_SERIAL_STATE_FRAMING 0x0010U +#define USB_CDC_SERIAL_STATE_RING_SIGNAL 0x0008U +#define USB_CDC_SERIAL_STATE_BREAK 0x0004U +#define USB_CDC_SERIAL_STATE_TXCARRIER 0x0002U +#define USB_CDC_SERIAL_STATE_RXCARRIER 0x0001U + +/****************************************************************************** + * + * USB_CDC_NOTIFY_CALL_STATE_CHANGE, wValue + * + * Call state values are defined above in the group beginning + * USB_CDC_CALL_STATE_IDLE. Note that the data returned alongside this + * notification are heavily dependent upon the call state being reported so no + * specific lengths or access macros are provided here. + * + * Macro to construct the correct wValue for this notification given a state + * and call index. + * + *****************************************************************************/ +/* + * Add code for macro SetNotifyCallStatewValue. + */ +/****************************************************************************** + * + * USB_CDC_NOTIFY_LINE_STATE_CHANGE, wValue + * + * Note that the data returned alongside this notification are heavily + * dependent upon the call state being reported so no specific lengths or + * access macros are provided here. + * + *****************************************************************************/ +#define USB_CDC_LINE_STATE_IDLE 0x0000 +#define USB_CDC_LINE_STATE_HOLD 0x0001 +#define USB_CDC_LINE_STATE_OFF_HOOK 0x0002 +#define USB_CDC_LINE_STATE_ON_HOOK 0x0003 + +/****************************************************************************** + * + * USB_CDC_NOTIFY_CONNECTION_SPEED_CHANGE, Data + * + * Macro to populate the 8 byte data structure returned alongside this + * notification. + * + *****************************************************************************/ +/* + * Add code for macro SetNotifyConnectionSpeedChange. + */ +/****************************************************************************** + * + * Packed structure definitions for request/response data blocks + * + *****************************************************************************/ + +/****************************************************************************** + * + * All structures defined in this section of the header require byte packing of + * fields. This is usually accomplished using the PACKED macro but, for IAR + * Embedded Workbench, this requires a pragma. + * + *****************************************************************************/ +#if defined(ewarm) || defined(__IAR_SYSTEMS_ICC__) +#pragma pack(1) +#endif + +/** + * @brief USB_CDC_GET/SET_LINE_CODING request-specific data. + */ +typedef struct +{ + /** + * @brief The data terminal rate in bits per second. + */ + uint32 ulRate; + + /** + * @brief The number of stop bits. Valid values are USB_CDC_STOP_BITS_1, + * USB_CDC_STOP_BITS_1_5 or USB_CDC_STOP_BITS_2 + */ + uint8 ucStop; + + /** + * @brief The parity setting. Valid values are USB_CDC_PARITY_NONE, + * USB_CDC_PARITY_ODD, USB_CDC_PARITY_EVEN, USB_CDC_PARITY_MARK + * and USB_CDC_PARITY_SPACE. + */ + uint8 ucParity; + + /** + * @brief The number of data bits per character. Valid values are + * 5, 6, 7 and 8 in this implementation. + */ + uint8 ucDatabits; +} +PACKED tLineCoding; + +/****************************************************************************** + * + * Return to default packing when using the IAR Embedded Workbench compiler. + * + *****************************************************************************/ +#if defined(ewarm) || defined(__IAR_SYSTEMS_ICC__) +#pragma pack() +#endif + +/** + * Close the Doxygen group. + * @} + */ + +/****************************************************************************** + * + * Mark the end of the C bindings section for C++ compilers. + * + *****************************************************************************/ +#ifdef __cplusplus +} +#endif + +#endif /* __USBCDC_H__ */ diff --git a/include/arch/rm46l8lp/halcogen/usbdcdc.h b/include/arch/rm46l8lp/halcogen/usbdcdc.h new file mode 100644 index 0000000..0fd7494 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/usbdcdc.h @@ -0,0 +1,383 @@ +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +/** + * @file usbdcdc.h + * + * @brief USBLib support for generic CDC ACM (serial) device. + * + */ + +#ifndef __USBDCDC_H__ +#define __USBDCDC_H__ + +/****************************************************************************** + * + * If building with a C++ compiler, make all of the definitions in this header + * have a C binding. + * + *****************************************************************************/ +#ifdef __cplusplus +extern "C" +{ +#endif + +/** *************************************************************************** + * + * \ingroup cdc_device_class_api + * @{ + * + *****************************************************************************/ + +/****************************************************************************** + * + * PRIVATE + * + * The first few sections of this header are private defines that are used by + * the USB CDC Serial code and are here only to help with the application + * allocating the correct amount of memory for the CDC Serial device code. + * + *****************************************************************************/ + +/****************************************************************************** + * + * PRIVATE + * + * This enumeration holds the various states that the device can be in during + * normal operation. + * + *****************************************************************************/ +typedef enum +{ + /** + * @brief Unconfigured. + */ + CDC_STATE_UNCONFIGURED, + + /** + * @brief No outstanding transaction remains to be completed. + */ + CDC_STATE_IDLE, + + /** + * @brief Waiting on completion of a send or receive transaction. + */ + CDC_STATE_WAIT_DATA, + + /** + * @brief Waiting for client to process data. + */ + CDC_STATE_WAIT_CLIENT +} +tCDCState; + +/****************************************************************************** + * + * PRIVATE + * + * This structure defines the private instance data and state variables for the + * CDC Serial device. The memory for this structure is pointed to by the + * psPrivateCDCSerData field in the tUSBDCDCDevice structure passed on + * USBDCDCInit(). + * + *****************************************************************************/ +typedef struct +{ + uint32 ulUSBBase; + tDeviceInfo *psDevInfo; + tConfigDescriptor *psConfDescriptor; + volatile tCDCState eCDCRxState; + volatile tCDCState eCDCTxState; + volatile tCDCState eCDCRequestState; + volatile tCDCState eCDCInterruptState; + volatile uint8 ucPendingRequest; + uint16 usBreakDuration; + uint16 usControlLineState; + uint16 usSerialState; + volatile uint32 usDeferredOpFlags; + uint16 usLastTxSize; + tLineCoding sLineCoding; + volatile tBoolean bRxBlocked; + volatile tBoolean bControlBlocked; + volatile tBoolean bConnected; + uint8 ucControlEndpoint; + uint8 ucBulkINEndpoint; + uint8 ucBulkOUTEndpoint; + uint8 ucInterfaceControl; + uint8 ucInterfaceData; +} +tCDCSerInstance; + + +#ifndef DEPRECATED +/** *************************************************************************** + * + * @brief The number of bytes of workspace required by the CDC device class + * driver. The client must provide a block of RAM of at least this + * size in the psPrivateCDCSerData field of the tUSBCDCDevice + * structure passed on USBDCDCInit(). + * + * This value is deprecated and should not be used, any new code + * should just pass in a tUSBCDCDevice structure in the + * psPrivateCDCSerData field. + * + *****************************************************************************/ +#define USB_CDCSER_WORKSPACE_SIZE (sizeof(tCDCSerInstance)) +#endif + +/** *************************************************************************** + * + * The following defines are used when working with composite devices. + * + *****************************************************************************/ + +/** *************************************************************************** + * + * @brief The size of the memory that should be allocated to create a + * configuration descriptor for a single instance of the USB Serial + * CDC Device. This does not include the configuration descriptor + * which is automatically ignored by the composite device class. + * + * For reference this is sizeof(g_pIADSerDescriptor) + + * sizeof(g_pCDCSerCommInterface) + sizeof(g_pCDCSerDataInterface) + * + *****************************************************************************/ +#define COMPOSITE_DCDC_SIZE (8u + 35u + 23u) + +/** *************************************************************************** + * + * CDC-specific events These events are provided to the application in the + * \e ulMsg parameter of the tUSBCallback function. + * + *****************************************************************************/ + +/** *************************************************************************** + * + * @brief The host requests that the device send a BREAK condition on its + * serial communication channel. The BREAK should remain active until + * a USBD_CDC_EVENT_CLEAR_BREAK event is received. + */ +#define USBD_CDC_EVENT_SEND_BREAK (USBD_CDC_EVENT_BASE + 0u) + +/** *************************************************************************** + * + * @brief The host requests that the device stop sending a BREAK condition on + * its serial communication channel. + */ +#define USBD_CDC_EVENT_CLEAR_BREAK (USBD_CDC_EVENT_BASE + 1u) + +/** *************************************************************************** + * + * @brief The host requests that the device set the RS232 signaling lines to + * a particular state. The ulMsgValue parameter contains the RTS and + * DTR control line states as defined in table 51 of the USB CDC class + * definition and is a combination of the following values: + * + * (RTS) USB_CDC_DEACTIVATE_CARRIER or USB_CDC_ACTIVATE_CARRIER + * (DTR) USB_CDC_DTE_NOT_PRESENT or USB_CDC_DTE_PRESENT + */ +#define USBD_CDC_EVENT_SET_CONTROL_LINE_STATE (USBD_CDC_EVENT_BASE + 2u) + +/** *************************************************************************** + * + * @brief The host requests that the device set the RS232 communication + * parameters. The pvMsgData parameter points to a tLineCoding + * structure defining the required number of bits per character, + * parity mode, number of stop bits and the baud rate. + */ +#define USBD_CDC_EVENT_SET_LINE_CODING (USBD_CDC_EVENT_BASE + 3u) + +/** *************************************************************************** + * + * @brief The host is querying the current RS232 communication parameters. + * The pvMsgData parameter points to a tLineCoding structure that the + * application must fill with the current settings prior to returning + * from the callback. + */ +#define USBD_CDC_EVENT_GET_LINE_CODING (USBD_CDC_EVENT_BASE + 4u) + +/** *************************************************************************** + * + * @brief The structure used by the application to define operating + * parameters for the CDC device. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief The vendor ID that this device is to present in the device + * descriptor. + */ + uint16 usVID; + + /** + * @brief The product ID that this device is to present in the device + * descriptor. + */ + uint16 usPID; + + /** + * @brief The maximum power consumption of the device, expressed in + * milliamps. + */ + uint16 usMaxPowermA; + + /** + * @brief Indicates whether the device is self- or bus-powered and + * whether or not it supports remote wakeup. Valid values are + * USB_CONF_ATTR_SELF_PWR or USB_CONF_ATTR_BUS_PWR, optionally + * ORed with USB_CONF_ATTR_RWAKE. + */ + uint8 ucPwrAttributes; + + /** + * @brief A pointer to the callback function which will be called to + * notify the application of all asynchronous control events + * related to the operation of the device. + */ + tUSBCallback pfnControlCallback; + + /** + * @brief A client-supplied pointer which will be sent as the first + * parameter in all calls made to the control channel callback, + * pfnControlCallback. + */ + void *pvControlCBData; + + /** + * @brief A pointer to the callback function which will be called to + * notify the application of events related to the device's data + * receive channel. + */ + tUSBCallback pfnRxCallback; + + /** + * @brief A client-supplied pointer which will be sent as the first + * parameter in all calls made to the receive channel callback, + * pfnRxCallback. + */ + void *pvRxCBData; + + /** + * @brief A pointer to the callback function which will be called to + * notify the application of events related to the device's data + * transmit channel. + */ + tUSBCallback pfnTxCallback; + + /** + * @brief A client-supplied pointer which will be sent as the first + * parameter in all calls made to the transmit channel callback, + * pfnTxCallback. + */ + void *pvTxCBData; + + /** + * @brief A pointer to the string descriptor array for this device. This + * array must contain the following string descriptor pointers in + * this order. Language descriptor, Manufacturer name string + * (language 1), Product name string (language 1), Serial number + * Control interface description string (language 1), + * Configuration description string (language 1). + * + * If supporting more than 1 language, the strings for indices + * 1 through 5 must be repeated for each of the other languages + * defined in the language descriptor. + */ + const uint8 * const *ppStringDescriptors; + + /** + * @brief The number of descriptors provided in the ppStringDescriptors + * array. This must be 1 + (5 * number of supported languages). + */ + uint32 ulNumStringDescriptors; + + /** + * @brief A pointer to the private instance data for this device. This + * memory must remain accessible for as long as the CDC device is + * in use and must not be modified by any code outside the CDC + * class driver. + */ + tCDCSerInstance *psPrivateCDCSerData; +} +tUSBDCDCDevice; + +extern tDeviceInfo g_sCDCSerDeviceInfo; + +/** *************************************************************************** + * + * API Function Prototypes + * + *****************************************************************************/ +extern void * USBDCDCCompositeInit(uint32 ulIndex, + const tUSBDCDCDevice *psCDCDevice); +extern void *USBDCDCInit(uint32 ulIndex, + const tUSBDCDCDevice *psCDCDevice); +extern void USBDCDCTerm(void *pvInstance); +extern void *USBDCDCSetControlCBData(tUSBDCDCDevice *pvInstance, void *pvCBData); +extern void *USBDCDCSetRxCBData(void *pvInstance, void *pvCBData); +extern void *USBDCDCSetTxCBData(void *pvInstance, void *pvCBData); +extern uint32 USBDCDCPacketWrite(void *pvInstance, + uint8 *pcData, + uint32 ulLength, + tBoolean bLast); +extern uint32 USBDCDCPacketRead(void *pvInstance, + uint8 *pcData, + uint32 ulLength, + tBoolean bLast); +extern uint32 USBDCDCTxPacketAvailable(void *pvInstance); +extern uint32 USBDCDCRxPacketAvailable(void *pvInstance); +extern void USBDCDCSerialStateChange(void *pvInstance, + uint16 usState); +extern void USBDCDCPowerStatusSet(void *pvInstance, uint8 ucPower); +extern tBoolean USBDCDCRemoteWakeupRequest(void *pvInstance); + +/** *************************************************************************** + * + * Close the Doxygen group. + * @} + * + *****************************************************************************/ + +/****************************************************************************** + * + * Mark the end of the C bindings section for C++ compilers. + * + *****************************************************************************/ +#ifdef __cplusplus +} +#endif + +#endif /* __USBDCDC_H__ */ diff --git a/include/arch/rm46l8lp/halcogen/usbdevice.h b/include/arch/rm46l8lp/halcogen/usbdevice.h new file mode 100644 index 0000000..67c3484 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/usbdevice.h @@ -0,0 +1,153 @@ +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +/** + * @file usbdevice.h + * + * @brief Types and definitions used during USB enumeration. + * + */ + +#ifndef __USBDEVICE_H__ +#define __USBDEVICE_H__ + +/****************************************************************************** + * + * If building with a C++ compiler, make all of the definitions in this header + * have a C binding. + * + *****************************************************************************/ +#ifdef __cplusplus +extern "C" +{ +#endif + +/** *************************************************************************** + * + * \ingroup device_api + * @{ + * + *****************************************************************************/ + +/** *************************************************************************** + * + * @brief The maximum number of independent interfaces that any single device + * implementation can support. Independent interfaces means interface + * descriptors with different bInterfaceNumber values - several + * interface descriptors offering different alternative settings but + * the same interface number count as a single interface. + * + *****************************************************************************/ +/*#define USB_MAX_INTERFACES_PER_DEVICE 8u*/ + +/** *************************************************************************** + * + * Close the Doxygen group. + * @} + * + *****************************************************************************/ + +/** *************************************************************************** + * + * @brief The default USB endpoint FIFO configuration structure. This + * structure contains definitions to set all USB FIFOs into single + * buffered mode with no DMA use. Each endpoint's FIFO is sized to + * hold the largest maximum packet size for any interface alternate + * setting in the current config descriptor. A pointer to this + * structure may be passed in the psFIFOConfig field of the + * tDeviceInfo structure passed to USBCDCInit if the application does + * not require any special handling of the USB controller FIFO. + * + *****************************************************************************/ +extern const tFIFOConfig g_sUSBDefaultFIFOConfig; + +/** *************************************************************************** + * + * Public APIs offered by the USB library device control driver. + * + *****************************************************************************/ +extern void USBDCDInit(uint32 ulIndex, tDeviceInfo *psDevice); +extern void USBDCDTerm(uint32 ulIndex); +extern void USBDCDStallEP0(uint32 ulIndex); +extern void USBDCDRequestDataEP0(uint32 ulIndex, uint8 *pucData, + uint32 ulSize); +extern void USBDCDSendDataEP0(uint32 ulIndex, uint8 *pucData, + uint32 ulSize); +extern void USBDCDSetDefaultConfiguration(uint32 ulIndex, + uint32 ulDefaultConfig); +extern uint32 USBDCDConfigDescGetSize(const tConfigHeader *psConfig); +extern uint32 USBDCDConfigDescGetNum(const tConfigHeader *psConfig, + uint32 ulType); +extern tDescriptorHeader *USBDCDConfigDescGet(const tConfigHeader *psConfig, + uint32 ulType, + uint32 ulIndex, + uint32 *pulSection); +extern uint32 + USBDCDConfigGetNumAlternateInterfaces(const tConfigHeader *psConfig, + uint8 ucInterfaceNumber); +extern tInterfaceDescriptor * + USBDCDConfigGetInterface(const tConfigHeader *psConfig, + uint32 ulIndex, uint32 ulAltCfg, + uint32 *pulSection); +extern tEndpointDescriptor * + USBDCDConfigGetInterfaceEndpoint(const tConfigHeader *psConfig, + uint32 ulInterfaceNumber, + uint32 ulAltCfg, + uint32 ulIndex); +extern void USBDCDPowerStatusSet(uint32 ulIndex, uint8 ucPower); +extern tBoolean USBDCDRemoteWakeupRequest(uint32 ulIndex); + +/** *************************************************************************** + * + * Early releases of the USB library had the following function named + * incorrectly. This macro ensures that any code which used the previous name + * will still operate as expected. + * + *****************************************************************************/ +#ifndef DEPRECATED +#define USBCDCConfigGetInterfaceEndpoint(a, b, c, d) \ + USBDCDConfigGetInterfaceEndpoint((a), (b), (c), (d)) +#endif + +/** *************************************************************************** + * + * Mark the end of the C bindings section for C++ compilers. + * + *****************************************************************************/ +#ifdef __cplusplus +} +#endif + +#endif /* __USBENUM_H__ */ diff --git a/include/arch/rm46l8lp/halcogen/usbdevicepriv.h b/include/arch/rm46l8lp/halcogen/usbdevicepriv.h new file mode 100644 index 0000000..2617b76 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/usbdevicepriv.h @@ -0,0 +1,90 @@ +/****************************************************************************** + * FILE DESCRIPTION + * --------------------------------------------------------------------------- + * File: usbdevicepriv.h + * Component: + * Module: usb + * Generator: - + * + * Description: Private header file used to share internal variables and + * function prototypes between the various device-related + * modules in the USB library. This header MUST NOT be + * used by application code. + * + *****************************************************************************/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __USBDEVICEPRIV_H__ +#define __USBDEVICEPRIV_H__ + +/****************************************************************************** + * + * If building with a C++ compiler, make all of the definitions in this header + * have a C binding. + * + *****************************************************************************/ + +#ifdef __cplusplus +extern "C" +{ +#endif + +/****************************************************************************** + * + * Device enumeration functions provided by device/usbenum.c and called from + * the interrupt handler in device/usbhandler.c + * + *****************************************************************************/ +extern tBoolean USBDeviceConfig(uint32 ulIndex, + const tConfigHeader *psConfig, + const tFIFOConfig *psFIFOConfig); +extern tBoolean USBDeviceConfigAlternate(uint32 ulIndex, + const tConfigHeader *psConfig, + uint8 ucInterfaceNum, + uint8 ucAlternateSetting); +extern void USBDeviceResumeTickHandler(uint32 ulIndex); + +/****************************************************************************** + * + * Mark the end of the C bindings section for C++ compilers. + * + *****************************************************************************/ +#ifdef __cplusplus +} +#endif + +#endif /* __USBDEVICEPRIV_H__ */ diff --git a/include/arch/rm46l8lp/halcogen/usblib.h b/include/arch/rm46l8lp/halcogen/usblib.h new file mode 100644 index 0000000..88e7fa5 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/usblib.h @@ -0,0 +1,1899 @@ +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +/** + * @file usblib.h + * + * @brief Main header file for the USB Library. + * + */ + +#ifndef __USBLIB_H__ +#define __USBLIB_H__ + +/****************************************************************************** + * + * If building with a C++ compiler, make all of the definitions in this header + * have a C binding. + * + *****************************************************************************/ +#ifdef __cplusplus +extern "C" +{ +#endif + + + +/* standard device requests -- USB_SetupDataPacket::bRequest */ +#define USB_REQUEST_GETSTATUS (0u) +#define USB_REQUEST_CLEARFEATURE (1u) +#define USB_REQUEST_SETFEATURE (3u) +#define USB_REQUEST_SETADDRESS (5u) +#define USB_REQUEST_GETDESCRIPTOR (6u) +#define USB_REQUEST_SETDESCRIPTOR (7u) +#define USB_REQUEST_GETCONFIGURATION (8u) +#define USB_REQUEST_SETCONFIGURATION (9u) +#define USB_REQUEST_GETINTERFACE (10u) +#define USB_REQUEST_SETINTERFACE (11u) +#define USB_REQUEST_SYNCHFRAME (12u) + + +/** *************************************************************************** + * + * This is the maximum number of endpoints supported by the usblib. + * + *****************************************************************************/ +#define USBLIB_NUM_EP 16u /* Number of supported endpoints. */ + +/****************************************************************************** + * + * The following macro allows compiler-independent syntax to be used to + * define packed structures. A typical structure definition using these + * macros will look similar to the following example: + * + * #ifdef ewarm + * #pragma pack(1) + * #endif + * + * typedef struct _PackedStructName + * { + * uint32 ulFirstField; + * char cCharMember; + * uint16 usShort; + * } + * PACKED tPackedStructName; + * + * #ifdef ewarm + * #pragma pack() + * #endif + * + * The conditional blocks related to ewarm include the #pragma pack() lines + * only if the IAR Embedded Workbench compiler is being used. Unfortunately, + * it is not possible to emit a #pragma from within a macro definition so this + * must be done explicitly. + * + *****************************************************************************/ +#if defined(ccs) || \ + defined(codered) || \ + defined(gcc) || \ + defined(rvmdk) || \ + defined(__ARMCC_VERSION) || \ + defined(sourcerygxx) +#define PACKED __attribute__ ((packed)) +#elif defined(ewarm) || defined(__IAR_SYSTEMS_ICC__) +#define PACKED +#elif (__TMS470__) +#define PACKED __attribute__ ((packed)) +#else +#error Unrecognized COMPILER! +#endif + +/****************************************************************************** + * + * Assorted language IDs from the document "USB_LANGIDs.pdf" provided by the + * USB Implementers' Forum (Version 1.0). + * + *****************************************************************************/ +#define USB_LANG_CHINESE_PRC 0x0804u /**< Chinese (PRC) */ +#define USB_LANG_CHINESE_TAIWAN 0x0404u /**< Chinese (Taiwan) */ +#define USB_LANG_EN_US 0x0409u /**< English (United States) */ +#define USB_LANG_EN_UK 0x0809u /**< English (United Kingdom) */ +#define USB_LANG_EN_AUS 0x0C09u /**< English (Australia) */ +#define USB_LANG_EN_CA 0x1009u /**< English (Canada) */ +#define USB_LANG_EN_NZ 0x1409u /**< English (New Zealand) */ +#define USB_LANG_FRENCH 0x040Cu /**< French (Standard) */ +#define USB_LANG_GERMAN 0x0407u /**< German (Standard) */ +#define USB_LANG_HINDI 0x0439u /**< Hindi */ +#define USB_LANG_ITALIAN 0x0410u /**< Italian (Standard) */ +#define USB_LANG_JAPANESE 0x0411u /**< Japanese */ +#define USB_LANG_KOREAN 0x0412u /**< Korean */ +#define USB_LANG_ES_TRAD 0x040Au /**< Spanish (Traditional) */ +#define USB_LANG_ES_MODERN 0x0C0Au /**< Spanish (Modern) */ +#define USB_LANG_SWAHILI 0x0441u /**< Swahili (Kenya) */ +#define USB_LANG_URDU_IN 0x0820u /**< Urdu (India) */ +#define USB_LANG_URDU_PK 0x0420u /**< Urdu (Pakistan) */ +/** *************************************************************************** + * + * @ingroup usbchap9_src + * @{ + * + *****************************************************************************/ + +/****************************************************************************** + * + * Note: + * + * Structure definitions which are derived directly from the USB specification + * use field names from the specification. Since a somewhat different version + * of Hungarian prefix notation is used from the Stellaris standard, beware of + * making assumptions about field sizes based on the field prefix when using + * these structures. Of particular note is the difference in the meaning of + * the 'i' prefix. In USB structures, this indicates a single byte index + * whereas in Stellaris code, this is a 32 bit integer. + * + *****************************************************************************/ + +/****************************************************************************** + * + * All structures defined in this section of the header require byte packing of + * fields. This is usually accomplished using the PACKED macro but, for IAR + * Embedded Workbench, this requires a pragma. + * + *****************************************************************************/ +#if defined(ewarm) || defined(__IAR_SYSTEMS_ICC__) +#pragma pack(1) +#endif + +/****************************************************************************** + * + * Definitions related to standard USB device requests (sections 9.3 & 9.4) + * + *****************************************************************************/ + +/** *************************************************************************** + * + * @brief The standard USB request header as defined in section 9.3 of the + * USB 2.0 specification. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief Determines the type and direction of the request. + */ + uint8 bmRequestType; + + /** + * @brief Identifies the specific request being made. + */ + uint8 bRequest; + + /** + * @brief Word-sized field that varies according to the request. + */ + uint16 wValue; + + /** + * @brief Word-sized field that varies according to the request; typically used + * to pass an index or offset. + */ + uint16 wIndex; + + /** + * @brief The number of bytes to transfer if there is a data stage to the + * request. + */ + uint16 wLength; + +} +PACKED tUSBRequest; + +/****************************************************************************** + * + * The following defines are used with the bmRequestType member of tUSBRequest. + * + * Request types have 3 bit fields: + * 4:0 - Is the recipient type. + * 6:5 - Is the request type. + * 7 - Is the direction of the request. + * + *****************************************************************************/ +#define USB_RTYPE_DIR_IN 0x80u +#define USB_RTYPE_DIR_OUT 0x00u + +#define USB_RTYPE_TYPE_M 0x60u +#define USB_RTYPE_VENDOR 0x40u +#define USB_RTYPE_CLASS 0x20u +#define USB_RTYPE_STANDARD 0x00u + +#define USB_RTYPE_RECIPIENT_M 0x1fu +#define USB_RTYPE_OTHER 0x03u +#define USB_RTYPE_ENDPOINT 0x02u +#define USB_RTYPE_INTERFACE 0x01u +#define USB_RTYPE_DEVICE 0x00u + +/****************************************************************************** + * + * Standard USB requests IDs used in the bRequest field of tUSBRequest. + * + *****************************************************************************/ +#define USBREQ_GET_STATUS 0x00u +#define USBREQ_CLEAR_FEATURE 0x01u +#define USBREQ_SET_FEATURE 0x03u +#define USBREQ_SET_ADDRESS 0x05u +#define USBREQ_GET_DESCRIPTOR 0x06u +#define USBREQ_SET_DESCRIPTOR 0x07u +#define USBREQ_GET_CONFIG 0x08u +#define USBREQ_SET_CONFIG 0x09u +#define USBREQ_GET_INTERFACE 0x0au +#define USBREQ_SET_INTERFACE 0x0bu +#define USBREQ_SYNC_FRAME 0x0cu + +#define USBREQ_COUNT (USBREQ_SYNC_FRAME + 1u) + +/****************************************************************************** + * + * Data returned from a USBREQ_GET_STATUS request to a device. + * + *****************************************************************************/ +#define USB_STATUS_SELF_PWR 0x0001u /**< Currently self powered. */ +#define USB_STATUS_BUS_PWR 0x0000u /**< Currently bus-powered. */ +#define USB_STATUS_PWR_M 0x0001u /**< Mask for power mode. */ +#define USB_STATUS_REMOTE_WAKE 0x0002u /**< Remote wake-up is currently + enabled. */ + +/****************************************************************************** + * + * Feature Selectors (tUSBRequest.wValue) passed on USBREQ_CLEAR_FEATURE and + * USBREQ_SET_FEATURE. + * + *****************************************************************************/ +#define USB_FEATURE_EP_HALT 0x0000u /**< Endpoint halt feature. */ +#define USB_FEATURE_REMOTE_WAKE 0x0001u /**< Remote wake feature, device only. */ +#define USB_FEATURE_TEST_MODE 0x0002u /**< Test mode */ + +/****************************************************************************** + * + * Endpoint Selectors (tUSBRequest.wIndex) passed on USBREQ_CLEAR_FEATURE, + * USBREQ_SET_FEATURE and USBREQ_GET_STATUS. + * + *****************************************************************************/ +#define USB_REQ_EP_NUM_M 0x007Fu +#define USB_REQ_EP_DIR_M 0x0080u +#define USB_REQ_EP_DIR_IN 0x0080u +#define USB_REQ_EP_DIR_OUT 0x0000u + +/****************************************************************************** + * + * Standard USB descriptor types. These values are passed in the upper bytes + * of tUSBRequest.wValue on USBREQ_GET_DESCRIPTOR and also appear in the + * bDescriptorType field of standard USB descriptors. + * + *****************************************************************************/ +#define USB_DTYPE_DEVICE 1u +#define USB_DTYPE_CONFIGURATION 2u +#define USB_DTYPE_STRING 3u +#define USB_DTYPE_INTERFACE 4u +#define USB_DTYPE_ENDPOINT 5u +#define USB_DTYPE_DEVICE_QUAL 6u +#define USB_DTYPE_OSPEED_CONF 7u +#define USB_DTYPE_INTERFACE_PWR 8u +#define USB_DTYPE_OTG 9u +#define USB_DTYPE_INTERFACE_ASC 11u +#define USB_DTYPE_CS_INTERFACE 36u + +/****************************************************************************** + * + * Definitions related to USB descriptors (sections 9.5 & 9.6) + * + *****************************************************************************/ + +/** *************************************************************************** + * + * @brief This structure describes a generic descriptor header. These + * fields are to be found at the beginning of all valid USB + * descriptors. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief The length of this descriptor (including this length byte) expressed + * in bytes. + */ + uint8 bLength; + + /** + * @brief The type identifier of the descriptor whose information follows. + * For standard descriptors, this field could contain, for example, + * USB_DTYPE_DEVICE to identify a device descriptor or + * USB_DTYPE_ENDPOINT to identify an endpoint descriptor. + */ + uint8 bDescriptorType; +} +PACKED tDescriptorHeader; + +/** *************************************************************************** + * + * @brief This structure describes the USB device descriptor as defined in USB + * 2.0 specification section 9.6.1. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief The length of this descriptor in bytes. All device descriptors + * are 18 bytes long. + */ + uint8 bLength; + + /** + * @brief The type of the descriptor. For a device descriptor, this will + * be USB_DTYPE_DEVICE (1). + */ + uint8 bDescriptorType; + + /** + * @brief The USB Specification Release Number in BCD format. + * For USB 2.0, this will be 0x0200. + */ + uint16 bcdUSB; + + /** + * @brief The device class code. + */ + uint8 bDeviceClass; + + /** + * @brief The device subclass code. This value qualifies the value + * found in the bDeviceClass field. + */ + uint8 bDeviceSubClass; + + /** + * @brief The device protocol code. This value is qualified by the + * values of bDeviceClass and bDeviceSubClass. + */ + uint8 bDeviceProtocol; + + /** + * @brief The maximum packet size for endpoint zero. Valid values + * are 8, 16, 32 and 64. + */ + uint8 bMaxPacketSize0; + + /** + * @brief The device Vendor ID (VID) as assigned by the USB-IF. + */ + uint16 idVendor; + + /** + * @brief The device Product ID (PID) as assigned by the manufacturer. + */ + uint16 idProduct; + + /** + * @brief The device release number in BCD format. + */ + uint16 bcdDevice; + + /** + * @brief The index of a string descriptor describing the manufacturer. + */ + uint8 iManufacturer; + + /** + * @brief The index of a string descriptor describing the product. + */ + uint8 iProduct; + + /** + * @brief The index of a string descriptor describing the device's serial + * number. + */ + uint8 iSerialNumber; + + /** + * @brief The number of possible configurations offered by the device. + * This field indicates the number of distinct configuration + * descriptors that the device offers. + */ + uint8 bNumConfigurations; +} +PACKED tDeviceDescriptor; + +/****************************************************************************** + * + * USB Device Class codes used in the tDeviceDescriptor.bDeviceClass field. + * Definitions for the bDeviceSubClass and bDeviceProtocol fields are device + * specific and can be found in the appropriate device class header files. + * + *****************************************************************************/ +#define USB_CLASS_DEVICE 0x00u +#define USB_CLASS_AUDIO 0x01u +#define USB_CLASS_CDC 0x02u +#define USB_CLASS_HID 0x03u +#define USB_CLASS_PHYSICAL 0x05u +#define USB_CLASS_IMAGE 0x06u +#define USB_CLASS_PRINTER 0x07u +#define USB_CLASS_MASS_STORAGE 0x08u +#define USB_CLASS_HUB 0x09u +#define USB_CLASS_CDC_DATA 0x0au +#define USB_CLASS_SMART_CARD 0x0bu +#define USB_CLASS_SECURITY 0x0du +#define USB_CLASS_VIDEO 0x0eu +#define USB_CLASS_HEALTHCARE 0x0fu +#define USB_CLASS_DIAG_DEVICE 0xdcu +#define USB_CLASS_WIRELESS 0xe0u +#define USB_CLASS_MISC 0xefu +#define USB_CLASS_APP_SPECIFIC 0xfeu +#define USB_CLASS_VEND_SPECIFIC 0xffu +#define USB_CLASS_EVENTS 0xffffffffU + +/****************************************************************************** + * + * Generic values for undefined subclass and protocol. + * + *****************************************************************************/ +#define USB_SUBCLASS_UNDEFINED 0x00u +#define USB_PROTOCOL_UNDEFINED 0x00u + +/****************************************************************************** + * + * The following are the miscellaneous subclass values. + * + *****************************************************************************/ +#define USB_MISC_SUBCLASS_SYNC 0x01u +#define USB_MISC_SUBCLASS_COMMON 0x02u + +/****************************************************************************** + * + * These following are miscellaneous protocol values. + * + *****************************************************************************/ +#define USB_MISC_PROTOCOL_IAD 0x01u + +/** *************************************************************************** + * + * @brief This structure describes the USB device qualifier descriptor as + * defined in the USB 2.0 specification, section 9.6.2. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief The length of this descriptor in bytes. All device qualifier + * descriptors are 10 bytes long. + */ + uint8 bLength; + + /** + * @brief The type of the descriptor. For a device descriptor, this will + * be USB_DTYPE_DEVICE_QUAL (6). + */ + uint8 bDescriptorType; + + /** + * @brief The USB Specification Release Number in BCD format. + * For USB 2.0, this will be 0x0200. + */ + uint16 bcdUSB; + + /** + * @brief The device class code. + */ + uint8 bDeviceClass; + + /** + * @brief The device subclass code. This value qualifies the value + * found in the bDeviceClass field. + */ + uint8 bDeviceSubClass; + + /** + * @brief The device protocol code. This value is qualified by the + * values of bDeviceClass and bDeviceSubClass. + */ + uint8 bDeviceProtocol; + + /** + * @brief The maximum packet size for endpoint zero when operating at + * a speed other than high speed. + */ + uint8 bMaxPacketSize0; + + /** + * @brief The number of other-speed configurations supported. + */ + uint8 bNumConfigurations; + + /** + * @brief Reserved for future use. Must be set to zero. + */ + uint8 bReserved; +} +PACKED tDeviceQualifierDescriptor; + +/** *************************************************************************** + * + * This structure describes the USB configuration descriptor as defined in + * USB 2.0 specification section 9.6.3. This structure also applies to the + * USB other speed configuration descriptor defined in section 9.6.4. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief The length of this descriptor in bytes. All configuration + * descriptors are 9 bytes long. + */ + uint8 bLength; + + /** + * @brief The type of the descriptor. For a configuration descriptor, + * this will be USB_DTYPE_CONFIGURATION (2). + */ + uint8 bDescriptorType; + + /** + * @brief The total length of data returned for this configuration. + * This includes the combined length of all descriptors + * (configuration, interface, endpoint and class- or + * vendor-specific) returned for this configuration. + */ + uint16 wTotalLength; + + /** + * @brief The number of interface supported by this configuration. + */ + uint8 bNumInterfaces; + + /** + * @brief The value used as an argument to the SetConfiguration standard + * request to select this configuration. + */ + uint8 bConfigurationValue; + + /** + * @brief The index of a string descriptor describing this configuration. + */ + uint8 iConfiguration; + + /** + * @brief Attributes of this configuration. + */ + uint8 bmAttributes; + + /** + * @brief The maximum power consumption of the USB device from the bus + * in this configuration when the device is fully operational. + * This is expressed in units of 2mA so, for example, + * 100 represents 200mA. + */ + uint8 bMaxPower; +} +PACKED tConfigDescriptor; + +/****************************************************************************** + * + * Flags used in constructing the value assigned to the field + * tConfigDescriptor.bmAttributes. Note that bit 7 is reserved and must be set + * to 1. + * + *****************************************************************************/ +#define USB_CONF_ATTR_PWR_M 0xC0u + +#define USB_CONF_ATTR_SELF_PWR 0xC0u +#define USB_CONF_ATTR_BUS_PWR 0x80u +#define USB_CONF_ATTR_RWAKE 0xA0u + +/** *************************************************************************** + * + * This structure describes the USB interface descriptor as defined in USB + * 2.0 specification section 9.6.5. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief The length of this descriptor in bytes. All interface + * descriptors are 9 bytes long. + */ + uint8 bLength; + + /** + * @brief The type of the descriptor. For an interface descriptor, this + * will be USB_DTYPE_INTERFACE (4). + */ + uint8 bDescriptorType; + + /** + * @brief The number of this interface. This is a zero based index into + * the array of concurrent interfaces supported by this + * configuration. + */ + uint8 bInterfaceNumber; + + /** + * @brief The value used to select this alternate setting for the + * interface defined in bInterfaceNumber. + */ + uint8 bAlternateSetting; + + /** + * @brief The number of endpoints used by this interface (excluding + * endpoint zero). + */ + uint8 bNumEndpoints; + + /** + * @brief The interface class code as assigned by the USB-IF. + */ + uint8 bInterfaceClass; + + /** + * @brief The interface subclass code as assigned by the USB-IF. + */ + uint8 bInterfaceSubClass; + + /** + * @brief The interface protocol code as assigned by the USB-IF. + */ + uint8 bInterfaceProtocol; + + /** + * @brief The index of a string descriptor describing this interface. + */ + uint8 iInterface; +} +PACKED tInterfaceDescriptor; + +/** *************************************************************************** + * + * This structure describes the USB endpoint descriptor as defined in USB + * 2.0 specification section 9.6.6. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief The length of this descriptor in bytes. All endpoint + * descriptors are 7 bytes long. + */ + uint8 bLength; + + /** + * @brief The type of the descriptor. For an endpoint descriptor, this + * will be USB_DTYPE_ENDPOINT (5). + */ + uint8 bDescriptorType; + + /** + * @brief The address of the endpoint. This field contains the endpoint + * number ORed with flag USB_EP_DESC_OUT or USB_EP_DESC_IN to + * indicate the endpoint direction. + */ + uint8 bEndpointAddress; + + /** + * @brief The endpoint transfer type, USB_EP_ATTR_CONTROL, + * USB_EP_ATTR_ISOC, USB_EP_ATTR_BULK or USB_EP_ATTR_INT and, + * if isochronous, additional flags indicating usage type and + * synchronization method. + */ + uint8 bmAttributes; + + /** + * @brief The maximum packet size this endpoint is capable of sending or + * receiving when this configuration is selected. For high speed + * isochronous or interrupt endpoints, bits 11 and 12 are used to + * pass additional information. + */ + uint16 wMaxPacketSize; + + /** + * @brief The polling interval for data transfers expressed in frames or + * micro frames depending upon the operating speed. + */ + uint8 bInterval; +} +PACKED tEndpointDescriptor; + +/****************************************************************************** + * + * Flags used in constructing the value assigned to the field + * tEndpointDescriptor.bEndpointAddress. + * + *****************************************************************************/ +#define USB_EP_DESC_OUT 0x00u +#define USB_EP_DESC_IN 0x80u +#define USB_EP_DESC_NUM_M 0x0fu + +/****************************************************************************** + * + * Mask used to extract the maximum packet size (in bytes) from the + * wMaxPacketSize field of the endpoint descriptor. + * + *****************************************************************************/ +#define USB_EP_MAX_PACKET_COUNT_M 0x07FFu + +/****************************************************************************** + * + * Endpoint attributes used in tEndpointDescriptor.bmAttributes. + * + *****************************************************************************/ +#define USB_EP_ATTR_CONTROL 0x00u +#define USB_EP_ATTR_ISOC 0x01u +#define USB_EP_ATTR_BULK 0x02u +#define USB_EP_ATTR_INT 0x03u +#define USB_EP_ATTR_TYPE_M 0x03u + +#define USB_EP_ATTR_ISOC_M 0x0cu +#define USB_EP_ATTR_ISOC_NOSYNC 0x00u +#define USB_EP_ATTR_ISOC_ASYNC 0x04u +#define USB_EP_ATTR_ISOC_ADAPT 0x08u +#define USB_EP_ATTR_ISOC_SYNC 0x0cu +#define USB_EP_ATTR_USAGE_M 0x30u +#define USB_EP_ATTR_USAGE_DATA 0x00u +#define USB_EP_ATTR_USAGE_FEEDBACK 0x10u +#define USB_EP_ATTR_USAGE_IMPFEEDBACK 0x20u + +/** *************************************************************************** + * + * @brief This structure describes the USB string descriptor for index 0 as + * defined in USB 2.0 specification section 9.6.7. Note that the + * number of language IDs is variable and can be determined by + * examining bLength. The number of language IDs present in the + * descriptor is given by ((bLength - 2) / 2). + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief The length of this descriptor in bytes. This value will vary + * depending upon the number of language codes provided in the + * descriptor. + */ + uint8 bLength; + + /** + * @brief The type of the descriptor. For a string descriptor, this will + * be USB_DTYPE_STRING (3). + */ + uint8 bDescriptorType; + + /** + * @brief The language code (LANGID) for the first supported language. + * Note that this descriptor may support multiple languages, in + * which case, the number of elements in the wLANGID array will + * increase and bLength will be updated accordingly. + */ + uint16 wLANGID[1]; +} +PACKED tString0Descriptor; + +/** *************************************************************************** + * + * @brief This structure describes the USB string descriptor for all string + * indexes other than 0 as defined in USB 2.0 specification + * section 9.6.7. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief The length of this descriptor in bytes. This value will be + * 2 greater than the number of bytes comprising the UNICODE + * string that the descriptor contains. + */ + uint8 bLength; + + /** + * @brief The type of the descriptor. For a string descriptor, this will + * be USB_DTYPE_STRING (3). + */ + uint8 bDescriptorType; + + /** + * @brief The first byte of the UNICODE string. This string is not NULL + * terminated. Its length (in bytes) can be computed by + * subtracting 2 from the value in the bLength field. + */ + uint8 bString; +} +PACKED tStringDescriptor; + +/** *************************************************************************** + * + * Write a 2 byte uint16 value to a USB descriptor block. + * + * @param usValue is the two byte uint16 that is to be written to + * the descriptor. + * + * This helper macro is used in descriptor definitions to write two-byte + * values. Since the configuration descriptor contains all interface and + * endpoint descriptors in a contiguous block of memory, these descriptors are + * typically defined using an array of bytes rather than as packed structures. + * + * @return Not a function. + * + *****************************************************************************/ +#define USBShort(usValue) (uint8_t)((uint16_t)(usValue) & (uint16_t)0x00ffU), (uint8_t)((uint16_t)(usValue) >> 8U) + +/** *************************************************************************** + * + * Write a 3 byte uint32 value to a USB descriptor block. + * + * @param ulValue is the three byte unsigned value that is to be written to the + * descriptor. + * + * This helper macro is used in descriptor definitions to write three-byte + * values. Since the configuration descriptor contains all interface and + * endpoint descriptors in a contiguous block of memory, these descriptors are + * typically defined using an array of bytes rather than as packed structures. + * + * @return Not a function. + * + *****************************************************************************/ +#define USB3Byte(ulValue) (ulValue & 0xff), \ + ((ulValue >> 8) & 0xff), \ + ((ulValue >> 16) & 0xff) + +/** *************************************************************************** + * + * Write a 4 byte uint32 value to a USB descriptor block. + * + * @param ulValue is the four byte uint32 that is to be written to the + * descriptor. + * + * This helper macro is used in descriptor definitions to write four-byte + * values. Since the configuration descriptor contains all interface and + * endpoint descriptors in a contiguous block of memory, these descriptors are + * typically defined using an array of bytes rather than as packed structures. + * + * @return Not a function. + * + *****************************************************************************/ +#define USBLong(ulValue) (ulValue & 0xff), \ + ((ulValue >> 8) & 0xff), \ + ((ulValue >> 16) & 0xff), \ + ((ulValue >> 24) & 0xff) + +/** *************************************************************************** + * + * Traverse to the next USB descriptor in a block. + * + * @param ptr points to the first byte of a descriptor in a block of + * USB descriptors. + * + * This macro aids in traversing lists of descriptors by returning a pointer + * to the next descriptor in the list given a pointer to the current one. + * + * @return Returns a pointer to the next descriptor in the block following + * @e ptr. + * + *****************************************************************************/ +#define NEXT_USB_DESCRIPTOR(ptr) \ + (tDescriptorHeader *)(((uint8 *)(ptr)) + \ + (ptr)->bLength) + +/****************************************************************************** + * + * Return to default packing when using the IAR Embedded Workbench compiler. + * + *****************************************************************************/ +#if defined(ewarm) || defined(__IAR_SYSTEMS_ICC__) +#pragma pack() +#endif + +/** *************************************************************************** + * + * Close the usbchap9_src Doxygen group. + * @} + * + *****************************************************************************/ + +/** *************************************************************************** + * + * @ingroup device_api + * @{ + * + *****************************************************************************/ + +/** *************************************************************************** + * + * @brief Function prototype for any standard USB request. + * + *****************************************************************************/ +typedef void (* tStdRequest)(void * pvInstance, tUSBRequest * pUSBRequest); + +/** *************************************************************************** + * + * @brief Data callback for receiving data from an endpoint. + * + *****************************************************************************/ +typedef void (* tInfoCallback)(void * pvInstance, uint32 ulInfo); + +/** *************************************************************************** + * + * @brief Callback made to indicate that an interface alternate setting + * change has occurred. + * + *****************************************************************************/ +typedef void (* tInterfaceCallback)(void * pvInstance, + uint8 ucInterfaceNum, + uint8 ucAlternateSetting); + +/** *************************************************************************** + * + * @brief Generic interrupt handler callbacks. + * + *****************************************************************************/ +typedef void (* tUSBIntHandler)(void * pvInstance); + +/** *************************************************************************** + * + * @brief Interrupt handler callbacks that have status information. + * + *****************************************************************************/ +typedef void (* tUSBEPIntHandler)(void * pvInstance, + uint32 ulStatus); + +/** *************************************************************************** + * + * @brief Generic handler callbacks that are used when the callers needs to + * call into an instance of class. + * + *****************************************************************************/ +typedef void (* tUSBDeviceHandler)(void * pvInstance, + uint32 ulRequest, + void * pvRequestData); + +/** *************************************************************************** + * + * @brief USB event handler functions used during enumeration and operation + * of the device stack. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief This callback is made whenever the USB host requests a + * non-standard descriptor from the device. + */ + tStdRequest pfnGetDescriptor; + + /** + * @brief This callback is made whenever the USB host makes a + * non-standard request. + */ + tStdRequest pfnRequestHandler; + + /** + * @brief This callback is made in response to a SetInterface request + * from the host. + */ + tInterfaceCallback pfnInterfaceChange; + + /** + * @brief This callback is made in response to a SetConfiguration + * request from the host. + */ + tInfoCallback pfnConfigChange; + + /** + * @brief This callback is made when data has been received following + * to a call to USBDCDRequestDataEP0. + */ + tInfoCallback pfnDataReceived; + + /** + * @brief This callback is made when data has been transmitted following + * a call to USBDCDSendDataEP0. + */ + tInfoCallback pfnDataSent; + + /** + * @brief This callback is made when a USB reset is detected. + */ + tUSBIntHandler pfnResetHandler; + + /** + * @brief This callback is made when the bus has been inactive long + * enough to trigger a suspend condition. + */ + tUSBIntHandler pfnSuspendHandler; + + /** + * @brief This is called when resume signaling is detected. + */ + tUSBIntHandler pfnResumeHandler; + + /** + * @brief This callback is made when the device is disconnected from + * the USB bus. + */ + tUSBIntHandler pfnDisconnectHandler; + + /** + * @brief This callback is made to inform the device of activity on + * all endpoints other than endpoint zero. + */ + tUSBEPIntHandler pfnEndpointHandler; + + /** + * @brief This generic handler is provided to allow requests based on + * a given instance to be passed into a device. This is commonly + * used by a top level composite device that is using multiple + * instances of a class. + */ + tUSBDeviceHandler pfnDeviceHandler; +} +tCustomHandlers; + +/** *************************************************************************** + * + * @brief This structure defines how a given endpoint's FIFO is configured in + * relation to the maximum packet size for the endpoint as specified + * in the endpoint descriptor. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief The multiplier to apply to an endpoint's maximum packet size + * when configuring the FIFO for that endpoint. For example, + * setting this value to 2 will result in a 128 byte FIFO being + * configured if bDoubleBuffer is FALSE and the associated + * endpoint is set to use a 64 byte maximum packet size. + */ + uint8 cMultiplier; + + /** + * @brief This field indicates whether to configure an endpoint's FIFO + * to be double- or single-buffered. If TRUE, a double-buffered + * FIFO is created and the amount of required FIFO storage is + * multiplied by two. + */ + tBoolean bDoubleBuffer; + + /** + * @brief This field defines endpoint mode flags which cannot be deduced + * from the configuration descriptor, namely any in the set + * USB_EP_AUTO_xxx or USB_EP_DMA_MODE_x. USBDCDConfig adds these + * flags to the endpoint mode and direction determined from the + * config descriptor before it configures the endpoint using a + * call to USBDevEndpointConfigSet(). + */ + uint16 usEPFlags; +} +tFIFOEntry; + +/** *************************************************************************** + * + * @brief This structure defines endpoint and FIFO configuration information + * for all endpoints that the device wishes to use. This information + * cannot be determined by examining the USB configuration descriptor + * and is provided to USBDCDConfig by the application to allow the USB + * controller endpoints to be correctly configured. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief An array containing one FIFO entry for each of the IN + * endpoints. Note that endpoint 0 is configured and managed by + * the USB device stack so is excluded from this array. The + * index 0 entry of the array corresponds to endpoint 1, + * index 1 to endpoint 2, etc. + */ + tFIFOEntry sIn[USBLIB_NUM_EP - 1]; + + /** + * @brief An array containing one FIFO entry for each of the OUT + * endpoints. Note that endpoint 0 is configured and managed by + * the USB device stack so is excluded from this array. + * The index 0 entry of the array corresponds to endpoint 1, + * index 1 to endpoint 2, etc. + */ + tFIFOEntry sOut[USBLIB_NUM_EP - 1]; +} +tFIFOConfig; + +/** *************************************************************************** + * + * @brief This structure defines a contiguous block of data which contains a + * group of descriptors that form part of a configuration descriptor + * for a device. It is assumed that a config section contains only + * whole descriptors. It is not valid to split a single descriptor + * across multiple sections. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief The number of bytes of descriptor data pointed to by pucData. + */ + uint8 ucSize; + + /** + * @brief A pointer to a block of data containing an integral number of + * SB descriptors which form part of a larger configuration + * descriptor. + */ + const uint8 * pucData; +} +tConfigSection; + +/** *************************************************************************** + * + * @brief This is the top level structure defining a USB device configuration + * descriptor. A configuration descriptor contains a collection of + * device-specific descriptors in addition to the basic config, + * interface and endpoint descriptors. To allow flexibility in + * constructing the configuration, the descriptor is described in + * terms of a list of data blocks. The first block must contain the + * configuration descriptor itself and the following blocks are + * appended to this in order to produce the full descriptor sent to + * the host in response to a GetDescriptor request for the + * configuration descriptor. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief The number of sections comprising the full descriptor for this + * configuration. + */ + uint8 ucNumSections; + + /** + * @brief A pointer to an array of ucNumSections section pointers which + * must be concatenated to form the configuration descriptor. + */ + const tConfigSection * const * psSections; +} +tConfigHeader; + +/** *************************************************************************** + * + * @brief This structure is passed to the USB library on a call to USBDCDInit + * and provides the library with information about the device that the + * application is implementing. It contains functions pointers for + * the various USB event handlers and pointers to each of the standard + * device descriptors. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief A pointer to a structure containing pointers to event handler + * functions provided by the client to support the operation of + * this device. + */ + tCustomHandlers sCallbacks; + + /** + * @brief A pointer to the device descriptor for this device. + */ + const uint8 * pDeviceDescriptor; + + /** + * @brief A pointer to an array of configuration descriptor pointers. + * Each entry in the array corresponds to one configuration that + * the device may be set to use by the USB host. The number of + * entries in the array must match the bNumConfigurations value + * in the device descriptor array, pDeviceDescriptor. + */ + const tConfigHeader * const * ppConfigDescriptors; + + /** + * @brief A pointer to the string descriptor array for this device. + * This array must be arranged as follows: + * + * - [0] - Standard descriptor containing supported language codes. + * - [1] - String 1 for the first language listed in descriptor 0. + * - [2] - String 2 for the first language listed in descriptor 0. + * - ... + * - [n] - String n for the first language listed in descriptor 0. + * - [n+1] - String 1 for the second language listed in descriptor 0. + * - ... + * - [2n] - String n for the second language listed in descriptor 0. + * - [2n+1]- String 1 for the third language listed in descriptor 0. + * - ... + * - [3n] - String n for the third language listed in descriptor 0. + * + * and so on. + */ + const uint8 * const * ppStringDescriptors; + + /** + * @brief The total number of descriptors provided in the ppStringDescriptors + * array. + */ + uint32 ulNumStringDescriptors; + + /** + * @brief A structure defining how the USB controller FIFO is to be + * partitioned between the various endpoints. This member can be + * set to point to g_sUSBDefaultFIFOConfig if the default FIFO + * configuration is acceptable. This configuration sets each + * endpoint FIFO to be single buffered and sized to hold the + * maximum packet size for the endpoint. + */ + const tFIFOConfig * psFIFOConfig; + + /** + * @brief This value will be passed back to all call back functions so + * that they have access to individual instance data based on the + * this pointer. + */ + void * pvInstance; +} +tDeviceInfo; + +/** *************************************************************************** + * + * Close the Doxygen group. + * @} + * + *****************************************************************************/ + +/** *************************************************************************** + * + * @ingroup general_usblib_api + * @{ + * + *****************************************************************************/ + +/****************************************************************************** + * + * USB descriptor parsing functions found in usbdesc.c + * + *****************************************************************************/ + +/** *************************************************************************** + * + * @brief The USB_DESC_ANY label is used as a wild card in several of the + * descriptor parsing APIs to determine whether or not particular + * search criteria should be ignored. + * + *****************************************************************************/ +#define USB_DESC_ANY 0xFFFFFFFFu + +extern uint32 USBDescGetNum(tDescriptorHeader * psDesc, + uint32 ulSize, uint32 ulType); +extern tDescriptorHeader * USBDescGet(tDescriptorHeader * psDesc, + uint32 ulSize, + uint32 ulType, + uint32 ulIndex); +extern uint32 + USBDescGetNumAlternateInterfaces(tConfigDescriptor * psConfig, + uint8 ucInterfaceNumber); +extern tInterfaceDescriptor * USBDescGetInterface(tConfigDescriptor * psConfig, + uint32 ulIndex, + uint32 ulAltCfg); +extern tEndpointDescriptor * + USBDescGetInterfaceEndpoint(tInterfaceDescriptor * psInterface, + uint32 ulIndex, + uint32 ulSize); + +/** *************************************************************************** + * + * The operating mode required by the USB library client. This type is used + * by applications which wish to be able to switch between host and device + * modes by calling the USBStackModeSet() API. + * + *****************************************************************************/ +typedef enum +{ + /** + * @brief The application wishes to operate as a USB device. + */ + USB_MODE_DEVICE = 0, + + /** + * @brief The application wishes to operate as a USB host. + */ + USB_MODE_HOST, + + /** + * @brief The application wishes to operate as both a host and device + * using On-The-Go protocols to negotiate. + */ + USB_MODE_OTG, + + /** + * @brief A marker indicating that no USB mode has yet been set by the + * application. + */ + USB_MODE_NONE +} tUSBMode; + +/** *************************************************************************** + * + * A pointer to a USB mode callback function. This function is called by the + * USB library to indicate to the application which operating mode it should + * use, host or device. + * + *****************************************************************************/ +typedef void (* tUSBModeCallback)(uint32 ulIndex, tUSBMode eMode); + +/** *************************************************************************** + * + * Mode selection and dual mode interrupt steering functions. + * + *****************************************************************************/ +extern void USBStackModeSet(uint32 ulIndex, tUSBMode eUSBMode, + tUSBModeCallback pfnCallback); +extern void USBDualModeInit(uint32 ulIndex); +extern void USBDualModeTerm(uint32 ulIndex); +extern void USBOTGMain(uint32 ulMsTicks); +extern void USBOTGPollRate(uint32 ulIndex, uint32 ulPollRate); +extern void USBOTGModeInit(uint32 ulIndex, uint32 ulPollRate, + void * pHostData, uint32 ulHostDataSize); +extern void USBOTGModeTerm(uint32 ulIndex); +extern void USB0OTGModeIntHandler(void); +extern void USB0DualModeIntHandler(void); + +/** *************************************************************************** + * + * USB callback function. + * + * @param pvCBData is the callback pointer associated with the instance + * generating the callback. This is a value provided by the client during + * initialization of the instance making the callback. + * @param ulEvent is the identifier of the asynchronous event which is being + * notified to the client. + * @param ulMsgParam is an event-specific parameter. + * @param pvMsgData is an event-specific data pointer. + * + * A function pointer provided to the USB layer by the application + * which will be called to notify it of all asynchronous events relating to + * data transmission or reception. This callback is used by device class + * drivers and host pipe functions. + * + * @return Returns an event-dependent value. + * + *****************************************************************************/ +typedef uint32 (* tUSBCallback)(void * pvCBData, uint32 ulEvent, + uint32 ulMsgParam, + void * pvMsgData); + +/** *************************************************************************** + * + * Base identifiers for groups of USB events. These are used by both the + * device class drivers and host layer. + * + * USB_CLASS_EVENT_BASE is the lowest identifier that should be used for + * a class-specific event. Individual event bases are defined for each + * of the supported device class drivers. Events with IDs between + * USB_EVENT_BASE and USB_CLASS_EVENT_BASE are reserved for stack use. + * + *****************************************************************************/ +#define USB_EVENT_BASE 0x0000u +#define USB_CLASS_EVENT_BASE 0x8000u + +/** *************************************************************************** + * + * Event base identifiers for the various device classes supported in host + * and device modes. + * The first 0x800 values of a range are reserved for the device specific + * messages and the second 0x800 values of a range are used for the host + * specific messages for a given class. + * + *****************************************************************************/ +#define USBD_CDC_EVENT_BASE (USB_CLASS_EVENT_BASE + 0u) +#define USBD_HID_EVENT_BASE (USB_CLASS_EVENT_BASE + 0x1000u) +#define USBD_HID_KEYB_EVENT_BASE (USBD_HID_EVENT_BASE + 0x100u) +#define USBD_BULK_EVENT_BASE (USB_CLASS_EVENT_BASE + 0x2000u) +#define USBD_MSC_EVENT_BASE (USB_CLASS_EVENT_BASE + 0x3000u) +#define USBD_AUDIO_EVENT_BASE (USB_CLASS_EVENT_BASE + 0x4000u) + +#define USBH_CDC_EVENT_BASE (USBD_CDC_EVENT_BASE + 0x800u) +#define USBH_HID_EVENT_BASE (USBD_HID_EVENT_BASE + 0x800u) +#define USBH_BULK_EVENT_BASE (USBD_BULK_EVENT_BASE + 0x800u) +#define USBH_MSC_EVENT_BASE (USBD_MSC_EVENT_BASE + 0x800u) +#define USBH_AUDIO_EVENT_BASE (USBD_AUDIO_EVENT_BASE + 0x800u) + +/** *************************************************************************** + * + * General events supported by device classes and host pipes. + * + *****************************************************************************/ + +/** + * @brief The device is now attached to a USB host and ready to begin sending + * and receiving data (used by device classes only). + */ +#define USB_EVENT_CONNECTED (USB_EVENT_BASE + 0u) + +/** + * @brief The device has been disconnected from the USB host (used by device + * classes only). + * + * Note: Due to a hardware erratum in revision A of LM3S3748, this + * event is not posted to self-powered USB devices when they are disconnected + * from the USB host. + */ +#define USB_EVENT_DISCONNECTED (USB_EVENT_BASE + 1u) + +/** + * @brief Data has been received and is in the buffer provided. + */ +#define USB_EVENT_RX_AVAILABLE (USB_EVENT_BASE + 2u) + +/** + * @brief This event is sent by a lower layer to inquire about the amount of + * unprocessed data buffered in the layers above. It is used in + * cases where a low level driver needs to ensure that all preceding + * data has been processed prior to performing some action or making + * some notification. Clients receiving this event should return the + * number of bytes of data that are unprocessed or 0 if no outstanding + * data remains. + */ +#define USB_EVENT_DATA_REMAINING (USB_EVENT_BASE + 3u) + +/** + * @brief This event is sent by a lower layer supporting DMA to request a + * buffer in which the next received packet may be stored. + * The \e ulMsgValue parameter indicates the maximum size of packet + * that can be received in this channel and \e pvMsgData points to + * storage which should be written with the returned buffer pointer. + * The return value from the callback should be the size of the buffer + * allocated (which may be less than the maximum size passed in + * \e ulMsgValue if the client knows that fewer bytes are expected + * to be received) or 0 if no buffer is being returned. + */ +#define USB_EVENT_REQUEST_BUFFER (USB_EVENT_BASE + 4u) + +/** + * @brief Data has been sent and acknowledged. If this event is received via + * the USB buffer callback, the \e ulMsgValue parameter indicates the + * number of bytes from the transmit buffer that have been successfully + * transmitted and acknowledged. + */ +#define USB_EVENT_TX_COMPLETE (USB_EVENT_BASE + 5u) + +/** + * @brief An error has been reported on the channel or pipe. The + * \e ulMsgValue parameter indicates the source(s) of the error and + * is the logical OR combination of "USBERR_" flags defined below. + */ +#define USB_EVENT_ERROR (USB_EVENT_BASE + 6u) + +/** + * @brief The bus has entered suspend state. + */ +#define USB_EVENT_SUSPEND (USB_EVENT_BASE + 7u) + +/** + * @brief The bus has left suspend state. + */ +#define USB_EVENT_RESUME (USB_EVENT_BASE + 8u) + +/** + * @brief A scheduler event has occurred. + */ +#define USB_EVENT_SCHEDULER (USB_EVENT_BASE + 9u) +/** + * @brief A device or host has detected a stall condition. + */ +#define USB_EVENT_STALL (USB_EVENT_BASE + 10u) + +/** + * @brief The host detected a power fault condition. + */ +#define USB_EVENT_POWER_FAULT (USB_EVENT_BASE + 11u) + +/** + * @brief The controller has detected a A-Side cable and needs power applied. + * This is only generated on OTG parts if automatic power control is + * disabled. + */ +#define USB_EVENT_POWER_ENABLE (USB_EVENT_BASE + 12u) + +/** + * @brief The controller needs power removed, This is only generated on OTG + * parts if automatic power control is disabled. + */ +#define USB_EVENT_POWER_DISABLE (USB_EVENT_BASE + 13u) + +/** + * @brief Used with pfnDeviceHandler handler function is classes to indicate + * changes in the interface number by a class outside the class being + * accessed. Typically this is when composite device class is in use. + * + * The \e pvInstance value should point to an instance of the device being + * accessed. + * + * The \e ulRequest should be USB_EVENT_COMP_IFACE_CHANGE. + * + * The \e pvRequestData should point to a two byte array where the first value + * is the old interface number and the second is the new interface number. + */ +#define USB_EVENT_COMP_IFACE_CHANGE (USB_EVENT_BASE + 14u) + +/** + * @brief Used with pfnDeviceHandler handler function is classes to indicate + * changes in endpoint number by a class outside the class being + * accessed. Typically this is when composite device class is in use. + * + * The \e pvInstance value should point to an instance of the device being + * accessed. + * + * The \e ulRequest should be USB_EVENT_COMP_EP_CHANGE. + * + * The \e pvRequestData should point to a two byte array where the first value + * is the old endpoint number and the second is the new endpoint number. The + * endpoint numbers should be exactly as USB specification defines them and + * bit 7 set indicates an IN endpoint and bit 7 clear indicates an OUT + * endpoint. + */ +#define USB_EVENT_COMP_EP_CHANGE (USB_EVENT_BASE + 15u) + +/** + * @brief Used with pfnDeviceHandler handler function is classes to indicate + * changes in string index number by a class outside the class being + * accessed. Typically this is when composite device class is in use. + * + * The \e pvInstance value should point to an instance of the device being + * accessed. + * + * The \e ulRequest should be USB_EVENT_COMP_STR_CHANGE. + * + * The \e pvRequestData should point to a two byte array where the first value + * is the old string index and the second is the new string index. + */ +#define USB_EVENT_COMP_STR_CHANGE (USB_EVENT_BASE + 16u) + +/** + * @brief Used with pfnDeviceHandler handler function is classes to allow the + * device class to make final adjustments to the configuration + * descriptor. This is only used when a device class is used in a + * composite device class is in use. + * + * The \e pvInstance value should point to an instance of the device being + * accessed. + * + * The \e ulRequest should be USB_EVENT_COMP_CONFIG. + * + * The \e pvRequestData should point to the beginning of the configuration + * descriptor for the device instance. + */ +#define USB_EVENT_COMP_CONFIG (USB_EVENT_BASE + 17u) + +/** *************************************************************************** + * + * Error sources reported via USB_EVENT_ERROR. + * + *****************************************************************************/ + +/** + * @brief The host received an invalid PID in a transaction. + */ +#define USBERR_HOST_IN_PID_ERROR 0x01000000u + +/** + * @brief The host did not receive a response from a device. + */ +#define USBERR_HOST_IN_NOT_COMP 0x00100000u + +/** + * @brief The host received a stall on an IN endpoint. + */ +#define USBERR_HOST_IN_STALL 0x00400000u + +/** + * @brief The host detected a CRC or bit-stuffing error (isochronous mode). + */ +#define USBERR_HOST_IN_DATA_ERROR 0x00080000u + +/** + * @brief The host received NAK on an IN endpoint for longer than the + * specified timeout period (interrupt, bulk and control modes). + */ +#define USBERR_HOST_IN_NAK_TO 0x00080000u + +/** + * @brief The host failed to communicate with a device via an IN endpoint. + */ +#define USBERR_HOST_IN_ERROR 0x00040000u + +/** + * @brief The host receive FIFO is full. + */ +#define USBERR_HOST_IN_FIFO_FULL 0x00020000u /* RX FIFO full */ +/** + * @brief The host received NAK on an OUT endpoint for longer than the + * specified timeout period (bulk, interrupt and control modes). + */ +#define USBERR_HOST_OUT_NAK_TO 0x00000080u + +/** + * @brief The host did not receive a response from a device (isochronous mode). + */ +#define USBERR_HOST_OUT_NOT_COMP 0x00000080u + +/** + * @brief The host received a stall on an OUT endpoint. + */ +#define USBERR_HOST_OUT_STALL 0x00000020u + +/** + * @brief The host failed to communicate with a device via an OUT endpoint. + */ +#define USBERR_HOST_OUT_ERROR 0x00000004u + +/** + * @brief The host received NAK on endpoint 0 for longer than the configured + * timeout. + */ +#define USBERR_HOST_EP0_NAK_TO 0x00000080u + +/** + * @brief The host failed to communicate with a device via an endpoint zero. + */ +#define USBERR_HOST_EP0_ERROR 0x00000010u + +/** + * @brief The device detected a CRC error in received data. + */ +#define USBERR_DEV_RX_DATA_ERROR 0x00080000u + +/** + * @brief The device was unable to receive a packet from the host since the + * receive FIFO is full. + */ +#define USBERR_DEV_RX_OVERRUN 0x00040000u + +/** + * @brief The device receive FIFO is full. + */ +#define USBERR_DEV_RX_FIFO_FULL 0x00020000u /* RX FIFO full */ + +/** *************************************************************************** + * + * Close the general_usblib_api Doxygen group. + * @} + * + *****************************************************************************/ + +/** *************************************************************************** + * + * @ingroup usblib_buffer_api + * @{ + * + *****************************************************************************/ + +/** *************************************************************************** + * + * @brief A function pointer type which describes either a class driver + * packet read or packet write function (both have the same prototype) + * to the USB buffer object. + * + *****************************************************************************/ +typedef uint32 (* tUSBPacketTransfer)(void * pvHandle, + uint8 * pcData, + uint32 ulLength, + tBoolean bLast); + +/** *************************************************************************** + * + * @brief A function pointer type which describes either a class driver + * transmit or receive packet available function (both have the same + * prototype) to the USB buffer object. + * + *****************************************************************************/ +typedef uint32 (* tUSBPacketAvailable)(void * pvHandle); + +/** *************************************************************************** + * + * @brief The number of bytes of workspace that each USB buffer object + * requires. This workspace memory is provided to the buffer on + * USBBufferInit() in the \e pvWorkspace field of the \e tUSBBuffer + * structure. + * + *****************************************************************************/ +#define USB_BUFFER_WORKSPACE_SIZE 16 + +/** *************************************************************************** + * + * @brief The structure used by the application to initialize a buffer object + * that will provide buffered access to either a transmit or receive + * channel. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief This field sets the mode of the buffer. If TRUE, the buffer + * operates as a transmit buffer and supports calls to + * USBBufferWrite by the client. If FALSE, the buffer operates + * as a receive buffer and supports calls to USBBufferRead. + */ + tBoolean bTransmitBuffer; + + /** + * @brief A pointer to the callback function which will be called to + * notify the application of all asynchronous events related to + * the operation of the buffer. + */ + tUSBCallback pfnCBack; + + /** + * @brief A pointer that the buffer will pass back to the client in the + * first parameter of all callbacks related to this instance. + */ + void * pvCBData; + + /** + * @brief The function which should be called to transmit a packet of + * data in transmit mode or receive a packet in receive mode. + */ + tUSBPacketTransfer pfnTransfer; + + /** + * @brief The function which should be called to determine if the + * endpoint is ready to accept a new packet for transmission in + * transmit mode or to determine the size of the buffer required + * to read a packet in receive mode. + */ + tUSBPacketAvailable pfnAvailable; + + /** + * @brief The handle to pass to the low level function pointers provided + * in the pfnTransfer and pfnAvailable members. For USB device + * use, this is the psDevice parameter required by the relevant + * device class driver APIs. For USB host use, this is the pipe + * identifier returned by USBHCDPipeAlloc. + */ + void * pvHandle; + + /** + * @brief A pointer to memory to be used as the ring buffer for this + * instance. + */ + uint8 * pcBuffer; + + /** + * @brief The size, in bytes, of the buffer pointed to by pcBuffer. + */ + uint32 ulBufferSize; + + /** + * @brief A pointer to USB_BUFFER_WORKSPACE_SIZE bytes of RAM that the + * buffer object can use for workspace. + */ + void * pvWorkspace; +} +tUSBBuffer; + +/** *************************************************************************** + * + * @brief The structure used for encapsulating all the items associated with + * a ring buffer. + * + *****************************************************************************/ +typedef struct +{ + /** + * @brief The ring buffer size. + */ + uint32 ulSize; + + /** + * @brief The ring buffer write index. + */ + volatile uint32 ulWriteIndex; + + /** + * @brief The ring buffer read index. + */ + volatile uint32 ulReadIndex; + + /** + * @brief The ring buffer. + */ + uint8 * pucBuf; +} +tUSBRingBufObject; + +/** *************************************************************************** + * + * USB buffer API function prototypes. + * + *****************************************************************************/ +extern const tUSBBuffer * USBBufferInit(const tUSBBuffer * psBuffer); +extern void USBBufferInfoGet(const tUSBBuffer * psBuffer, + tUSBRingBufObject * psRingBuf); +extern void * USBBufferCallbackDataSet(tUSBBuffer * psBuffer, void * pvCBData); +extern uint32 USBBufferWrite(const tUSBBuffer * psBuffer, + const uint8 * pucData, + uint32 ulLength); +extern void USBBufferDataWritten(const tUSBBuffer * psBuffer, + uint32 ulLength); +extern void USBBufferDataRemoved(const tUSBBuffer * psBuffer, + uint32 ulLength); +extern void USBBufferFlush(const tUSBBuffer * psBuffer); +extern uint32 USBBufferRead(const tUSBBuffer * psBuffer, + uint8 * pucData, + uint32 ulLength); +extern uint32 USBBufferDataAvailable(const tUSBBuffer * psBuffer); +extern uint32 USBBufferSpaceAvailable(const tUSBBuffer * psBuffer); +extern uint32 USBBufferEventCallback(void * pvCBData, + uint32 ulEvent, + uint32 ulMsgValue, + void * pvMsgData); +extern tBoolean USBRingBufFull(tUSBRingBufObject * ptUSBRingBuf); +extern tBoolean USBRingBufEmpty(tUSBRingBufObject * ptUSBRingBuf); +extern void USBRingBufFlush(tUSBRingBufObject * ptUSBRingBuf); +extern uint32 USBRingBufUsed(tUSBRingBufObject * ptUSBRingBuf); +extern uint32 USBRingBufFree(tUSBRingBufObject * ptUSBRingBuf); +extern uint32 USBRingBufContigUsed(tUSBRingBufObject * ptUSBRingBuf); +extern uint32 USBRingBufContigFree(tUSBRingBufObject * ptUSBRingBuf); +extern uint32 USBRingBufSize(tUSBRingBufObject * ptUSBRingBuf); +extern uint8 USBRingBufReadOne(tUSBRingBufObject * ptUSBRingBuf); +extern void USBRingBufRead(tUSBRingBufObject * ptUSBRingBuf, + uint8 * pucData, uint32 ulLength); +extern void USBRingBufWriteOne(tUSBRingBufObject * ptUSBRingBuf, + uint8 ucData); +extern void USBRingBufWrite(tUSBRingBufObject * ptUSBRingBuf, + const uint8 pucData[], + uint32 ulLength); +extern void USBRingBufAdvanceWrite(tUSBRingBufObject * ptUSBRingBuf, + uint32 ulNumBytes); +extern void USBRingBufAdvanceRead(tUSBRingBufObject * ptUSBRingBuf, + uint32 ulNumBytes); +extern void USBRingBufInit(tUSBRingBufObject * ptUSBRingBuf, + uint8 * pucBuf, uint32 ulSize); + +/** *************************************************************************** + * + * Close the Doxygen group. + * @} + * + *****************************************************************************/ + +/****************************************************************************** + * + * Mark the end of the C bindings section for C++ compilers. + * + *****************************************************************************/ +#ifdef __cplusplus +} +#endif + +#endif /* __USBLIB_H__ */ -- cgit v1.2.3