From 4e70dc99f2fe61235c7e23739f91e3f7e2fff837 Mon Sep 17 00:00:00 2001 From: Daniel Friesel Date: Thu, 25 Feb 2021 21:49:29 +0100 Subject: move datalog functions from i2cdetect into separate app --- src/app/i2cdetect/Kconfig | 2 +- src/app/i2cdetect/Makefile.inc | 1 - src/app/i2cdetect/main.cc | 225 ++++------------------------------------- 3 files changed, 23 insertions(+), 205 deletions(-) (limited to 'src/app/i2cdetect') diff --git a/src/app/i2cdetect/Kconfig b/src/app/i2cdetect/Kconfig index fe4de80..c8c6744 100644 --- a/src/app/i2cdetect/Kconfig +++ b/src/app/i2cdetect/Kconfig @@ -3,4 +3,4 @@ # SPDX-License-Identifier: CC0-1.0 prompt "I2C Bus Scanner" -depends on loop && !wakeup && meta_driver_i2c +depends on !loop && !wakeup && meta_driver_i2c diff --git a/src/app/i2cdetect/Makefile.inc b/src/app/i2cdetect/Makefile.inc index d2a9de5..501e914 100644 --- a/src/app/i2cdetect/Makefile.inc +++ b/src/app/i2cdetect/Makefile.inc @@ -5,6 +5,5 @@ # SPDX-License-Identifier: CC0-1.0 ifdef app - CONFIG_loop = y override arch_drivers += ,i2c endif diff --git a/src/app/i2cdetect/main.cc b/src/app/i2cdetect/main.cc index 27e35bf..fb6f54c 100644 --- a/src/app/i2cdetect/main.cc +++ b/src/app/i2cdetect/main.cc @@ -11,168 +11,6 @@ #else #include "driver/soft_i2c.h" #endif -#ifdef DRIVER_LM75 -#include "driver/lm75.h" -#endif -#ifdef DRIVER_S5851A -#include "driver/s5851a.h" -#endif -#ifdef DRIVER_AM2320 -#include "driver/am2320.h" -#endif -#ifdef DRIVER_BME280 -#include "driver/bme280.h" -#include "driver/bme680_util.h" -#endif -#ifdef DRIVER_BME680 -#include "driver/bme680.h" -#include "driver/bme680_util.h" -#endif -#ifdef DRIVER_CCS811 -#include "driver/ccs811.h" -#endif -#ifdef DRIVER_EEPROM24LC64 -#include "driver/eeprom24lc64.h" -#endif -#ifdef DRIVER_MAX44009 -#include "driver/max44009.h" -#endif -#ifdef DRIVER_HDC1080 -#include "driver/hdc1080.h" -#endif -#ifdef DRIVER_MPU9250 -#include "driver/mpu9250.h" -#endif -#ifdef DRIVER_MMSIMPLE -#include "driver/mmsimple.h" -#endif - -void loop(void) -{ -#ifdef DRIVER_LM75 - kout.printf_float(lm75.getTemp()); - kout << endl; -#endif -#ifdef DRIVER_S5851A - kout.printf_float(s5851a.getTemp()); - kout << endl; -#endif -#ifdef DRIVER_AM2320 - am2320.read(); - if (am2320.getStatus() == 0) { - kout.printf_float(am2320.getTemp()); - kout << " degC @ "; - kout.printf_float(am2320.getHumidity()); - kout << " rel%" << endl; - } else { - kout << "AM2320 error " << dec << am2320.getStatus() << endl; - } -#endif -#ifdef DRIVER_BME280 - bme280.intf = BME280_I2C_INTF; - bme280.read = bme680_i2c_read; - bme280.write = bme680_i2c_write; - bme280.delay_ms = bme680_delay_ms; - - int8_t rslt = BME280_OK; - struct bme280_data comp_data; - rslt = bme280.init(); - kout << "BME280 init " << rslt << endl; - bme280.settings.osr_p = BME280_OVERSAMPLING_16X; - bme280.settings.osr_t = BME280_OVERSAMPLING_16X; - bme280.settings.osr_h = BME280_OVERSAMPLING_16X; - bme280.settings.filter = BME280_FILTER_COEFF_OFF; - bme280.settings.standby_time = BME280_STANDBY_TIME_500_MS; - bme280.setSensorSettings(BME280_OSR_PRESS_SEL | BME280_OSR_TEMP_SEL | BME280_OSR_HUM_SEL | BME280_FILTER_SEL | BME280_STANDBY_SEL); - bme280.enterNormalMode(); - arch.delay_ms(100); - rslt = bme280.getSensorData(BME280_ALL, &comp_data); - kout << "BME280 read " << rslt << endl; - kout << "BME280 temperature " << (float)comp_data.temperature / 100 << " degC" << endl; - kout << "BME280 humidity " << (float)comp_data.humidity / 1024 << " %" << endl; - kout << "BME280 pressure " << (float)comp_data.pressure / 100 << " Pa" << endl; -#endif -#ifdef DRIVER_BME680 - bme680.intf = BME680_I2C_INTF; - bme680.read = bme680_i2c_read; - bme680.write = bme680_i2c_write; - bme680.delay_ms = bme680_delay_ms; - /* amb_temp can be set to 25 prior to configuring the gas sensor - * or by performing a few temperature readings without operating the gas sensor. - */ - bme680.amb_temp = 25; - - int8_t rslt = BME680_OK; - rslt = bme680.init(); - kout << "BME680 init " << rslt << endl; - - bme680.power_mode = BME680_FORCED_MODE; - bme680.tph_sett.os_hum = BME680_OS_1X; - bme680.tph_sett.os_pres = BME680_OS_16X; - bme680.tph_sett.os_temp = BME680_OS_2X; - - bme680.gas_sett.run_gas = BME680_ENABLE_GAS_MEAS; - bme680.gas_sett.heatr_dur = 30; - bme680.gas_sett.heatr_temp = 300; - bme680.setSensorSettings(BME680_OST_SEL | BME680_OSP_SEL | BME680_OSH_SEL | BME680_GAS_SENSOR_SEL); - bme680.setSensorMode(); - arch.delay_ms(200); - struct bme680_field_data data; - bme680.getSensorData(&data); - kout << "BME680 temperature " << (float)data.temperature / 100 << " degC" << endl; - kout << "BME680 humidity " << (float)data.humidity / 1000 << " %" << endl; - kout << "BME680 pressure " << (float)data.pressure / 100 << " hPa" << endl; - kout << "BME680 gas resistance " << data.gas_resistance << endl; -#endif -#ifdef DRIVER_CCS811 - ccs811.read(); - kout << bin; - kout << "CCS811 status / error: " << ccs811.status << " / " << ccs811.error_id << endl; - kout << dec; - kout << "CCS811 tVOC / eCO₂ : " << ccs811.tvoc << " ppb / " << ccs811.eco2 << " ppm" << endl; -#endif -#ifdef DRIVER_HDC1080 - /* - hdc1080.heater(1); - for (unsigned char i = 0; i < 50; i++) { - hdc1080.getTemp(); - } - */ - kout << "HDC1080 temperature " << hdc1080.getTemp() << " degC" << endl; - kout << "HDC1080 humidity " << hdc1080.getRH() << " %H" << endl; -#endif -#ifdef DRIVER_MPU9250 - int mx, my, mz; - kout << "Temperature: " << mpu9250.getTemperature() << endl; - kout << "Accel X " << mpu9250.getAccelX() << endl; - kout << "Accel Y " << mpu9250.getAccelY() << endl; - kout << "Accel Z " << mpu9250.getAccelZ() << endl; - kout << "Gyro X " << mpu9250.getGyroX() << endl; - kout << "Gyro Y " << mpu9250.getGyroY() << endl; - kout << "Gyro Z " << mpu9250.getGyroZ() << endl; - mpu9250.getRawMagnet(&mx, &my, &mz); - kout << "Magnet X " << mx << endl; - kout << "Magnet Y " << my << endl; - kout << "Magnet Z " << mz << endl; -#endif -#ifdef DRIVER_MAX44009 - kout.printf_float(max44009.getLux()); - kout << endl; -#endif -#ifdef DRIVER_EEPROM24LC64 - char buf[33]; - static unsigned char page = 0; - eeprom24lc64.writePage(page, "Hello, World! Und so weiter, lol"); - arch.delay_ms(10); - eeprom24lc64.readPage(page, buf); - buf[32] = '\0'; - kout << "Address " << page << ": " << buf << endl; - page++; -#endif -#ifdef DRIVER_MMSIMPLE - moody.toggleBlue(); -#endif -} unsigned int i2c_status[128 / (8 * sizeof(unsigned int)) + 1]; @@ -184,56 +22,37 @@ int main(void) kout.setup(); if (i2c.setup() != 0) { + kout << "I2C setup FAILED" << endl; return 1; } kout << "I2C setup OK" << endl; -#ifdef DRIVER_CCS811 - kout << hex; - kout << "CCS811 HWID: " << ccs811.getManufacturerID() << endl; - arch.delay_ms(65); - kout << "CCS811 status: " << ccs811.getStatus() << endl; - arch.delay_ms(65); - ccs811.init(); - arch.delay_ms(65); - kout << "CCS811 status: " << ccs811.getStatus() << endl; - kout << dec; - ccs811.setMode(2); - //arch.delay_ms(50); -#endif -#ifdef DRIVER_HDC1080 - hdc1080.init(); - if (hdc1080.getManufacturerID() != 0x5449) { - kout << "[!] invalid HDC1080 manufacturer ID: " << hex << hdc1080.getManufacturerID() << endl; - } -#endif -#ifdef DRIVER_MPU9250 - mpu9250.init(); -#endif - - for (unsigned char i = 0; i < sizeof(i2c_status)/sizeof(unsigned int); i++) { - i2c_status[i] = 0; - } - - i2c.scan(i2c_status); - - kout << " 0 1 2 3 4 5 6 7 8 9 a b c d e f"; - for (unsigned char address = 0; address < 128; address++) { - if ((address & 0x0f) == 0) { - kout << endl; - kout.printf_uint8(address); - kout << ":"; + while (1) { + for (unsigned char i = 0; i < sizeof(i2c_status)/sizeof(unsigned int); i++) { + i2c_status[i] = 0; } - if (i2c_status[address / (8 * sizeof(unsigned int))] & (1 << (address % (8 * sizeof(unsigned int))))) { - kout << " "; - kout.printf_uint8(address); - } else { - kout << " --"; + i2c.scan(i2c_status); + + kout << " 0 1 2 3 4 5 6 7 8 9 a b c d e f"; + for (unsigned char address = 0; address < 128; address++) { + if ((address & 0x0f) == 0) { + kout << endl; + kout.printf_uint8(address); + kout << ":"; + } + + if (i2c_status[address / (8 * sizeof(unsigned int))] & (1 << (address % (8 * sizeof(unsigned int))))) { + kout << " "; + kout.printf_uint8(address); + } else { + kout << " --"; + } } + kout << endl << endl; + arch.delay_ms(1000); } - kout << endl; arch.idle_loop(); -- cgit v1.2.3