/** @file reg_crc.h
*   @brief CRC Register Layer Header File
*   @date 11-Dec-2018
*   @version 04.07.01
*   
*   This file contains:
*   - Definitions
*   - Types
*   - Interface Prototypes
*   .
*   which are relevant for the CRC driver.
*/

/* 
* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com  
* 
* 
*  Redistribution and use in source and binary forms, with or without 
*  modification, are permitted provided that the following conditions 
*  are met:
*
*    Redistributions of source code must retain the above copyright 
*    notice, this list of conditions and the following disclaimer.
*
*    Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the 
*    documentation and/or other materials provided with the   
*    distribution.
*
*    Neither the name of Texas Instruments Incorporated nor the names of
*    its contributors may be used to endorse or promote products derived
*    from this software without specific prior written permission.
*
*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/


#ifndef __REG_CRC_H__
#define __REG_CRC_H__

#include "sys_common.h"

/* USER CODE BEGIN (0) */
/* USER CODE END */

/* Crc Register Frame Definition */
/** @struct crcBase
*   @brief CRC Register Frame Definition
*
*   This type is used to access the CRC Registers.
*/
/** @typedef crcBASE_t
*   @brief CRC Register Frame Type Definition
*
*   This type is used to access the CRC Registers.
*/
typedef volatile struct crcBase
{
    uint32      CTRL0;                /**< 0x0000: Global Control Register 0 >**/
    uint32      rvd1;                 /**< 0x0004: reserved >**/
    uint32      CTRL1;                /**< 0x0008: Global Control Register 1 >**/
    uint32      rvd2;                 /**< 0x000C: reserved >**/    
    uint32      CTRL2;                /**< 0x0010: Global Control Register 2 >**/
    uint32      rvd3;                 /**< 0x0014: reserved >**/        
    uint32      INTS;                 /**< 0x0018: Interrupt Enable Set Register >**/
    uint32      rvd4;                 /**< 0x001C: reserved >**/        
    uint32      INTR;                 /**< 0x0020: Interrupt Enable Reset Register >**/
    uint32      rvd5;                 /**< 0x0024: reserved >**/    
    uint32      STATUS;               /**< 0x0028: Interrupt Status Register >**/
    uint32      rvd6;                 /**< 0x002C: reserved >**/    
    uint32      INT_OFFSET_REG;       /**< 0x0030: Interrupt Offset >**/
    uint32      rvd7;                 /**< 0x0034: reserved >**/    
    uint32      BUSY;                 /**< 0x0038: CRC Busy Register >**/
    uint32      rvd8;                 /**< 0x003C: reserved >**/    
    uint32      PCOUNT_REG1;          /**< 0x0040: Pattern Counter Preload Register1 >**/
    uint32      SCOUNT_REG1;          /**< 0x0044: Sector Counter Preload Register1 >**/
    uint32      CURSEC_REG1;          /**< 0x0048: Current Sector Register 1 >**/
    uint32      WDTOPLD1;             /**< 0x004C: Channel 1 Watchdog Timeout Preload Register A >**/
    uint32      BCTOPLD1;             /**< 0x0050: Channel 1 Block Complete Timeout Preload Register B >**/
    uint32      rvd9[3];              /**< 0x0054: reserved >**/
    uint32      PSA_SIGREGL1;         /**< 0x0060: Channel 1 PSA signature low register >**/
    uint32      PSA_SIGREGH1;         /**< 0x0064: Channel 1 PSA signature high register >**/
    uint32      REGL1;                /**< 0x0068: Channel 1 CRC value low register >**/
    uint32      REGH1;                /**< 0x006C: Channel 1 CRC value high register >**/
    uint32      PSA_SECSIGREGL1;      /**< 0x0070: Channel 1 PSA sector signature low register >**/
    uint32      PSA_SECSIGREGH1;      /**< 0x0074: Channel 1 PSA sector signature high register >**/
    uint32      RAW_DATAREGL1;        /**< 0x0078: Channel 1 Raw Data Low Register >**/
    uint32      RAW_DATAREGH1;        /**< 0x007C: Channel 1 Raw Data High Register >**/
    uint32      PCOUNT_REG2;          /**< 0x0080: CRC Pattern Counter Preload Register2 >**/
    uint32      SCOUNT_REG2;          /**< 0x0084: Sector Counter Preload Register2 >**/
    uint32      CURSEC_REG2;          /**< 0x0088: Current Sector Register 2>**/
    uint32      WDTOPLD2;             /**< 0x008C: Channel 2 Watchdog Timeout Preload Register A >**/
    uint32      BCTOPLD2;             /**< 0x0090: Channel 2 Block Complete Timeout Preload Register B >**/
    uint32      rvd10[3];             /**< 0x0094: reserved >**/
    uint32      PSA_SIGREGL2;         /**< 0x00A0: Channel 2 PSA signature low register >**/
    uint32      PSA_SIGREGH2;         /**< 0x00A4: Channel 2 PSA signature high register >**/
    uint32      REGL2;                /**< 0x00A8: Channel 2 CRC value low register >**/
    uint32      REGH2;                /**< 0x00AC: Channel 2 CRC value high register >**/
    uint32      PSA_SECSIGREGL2;      /**< 0x00B0: Channel 2 PSA sector signature low register >**/
    uint32      PSA_SECSIGREGH2;      /**< 0x00B4: Channel 2 PSA sector signature high register >**/
    uint32      RAW_DATAREGL2;        /**< 0x00B8: Channel 2 Raw Data Low Register >**/
    uint32      RAW_DATAREGH2;        /**< 0x00BC: Channel 2 Raw Data High Register >**/
}crcBASE_t;
 
/** @def crcREG
*   @brief CRC Register Frame Pointer
*
*   This pointer is used by the CRC driver to access the CRC registers.
*/
#define crcREG ((crcBASE_t *)0xFE000000U)

/* USER CODE BEGIN (1) */
/* USER CODE END */


#endif