/** @file reg_sci.h
*   @brief SCI Register Layer Header File
*   @date 11-Dec-2018
*   @version 04.07.01
*   
*   This file contains:
*   - Definitions
*   - Types
*   - Interface Prototypes
*   .
*   which are relevant for the SCI driver.
*/

/* 
* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com 
* 
* 
*  Redistribution and use in source and binary forms, with or without 
*  modification, are permitted provided that the following conditions 
*  are met:
*
*    Redistributions of source code must retain the above copyright 
*    notice, this list of conditions and the following disclaimer.
*
*    Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the 
*    documentation and/or other materials provided with the   
*    distribution.
*
*    Neither the name of Texas Instruments Incorporated nor the names of
*    its contributors may be used to endorse or promote products derived
*    from this software without specific prior written permission.
*
*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/


#ifndef __REG_SCI_H__
#define __REG_SCI_H__

#include "sys_common.h"
#include "reg_gio.h"



/* USER CODE BEGIN (0) */
/* USER CODE END */

/* Sci Register Frame Definition */
/** @struct sciBase
*   @brief SCI Base Register Definition
*
*   This structure is used to access the SCI module registers.
*/
/** @typedef sciBASE_t
*   @brief SCI Register Frame Type Definition
*
*   This type is used to access the SCI Registers.
*/
typedef volatile struct sciBase
{
    uint32 GCR0;          /**< 0x0000 Global Control Register 0 */
    uint32 GCR1;          /**< 0x0004 Global Control Register 1 */
    uint32 GCR2;         /**< 0x0008 Global Control Register 2. Note: Applicable only to LIN – SCI Compatibility Mode,Reserved for standalone SCI*/
    uint32 SETINT;       /**< 0x000C Set Interrupt Enable Register */
    uint32 CLEARINT;      /**< 0x0010 Clear Interrupt Enable Register */
    uint32 SETINTLVL;    /**< 0x0014 Set Interrupt Level Register */
    uint32 CLEARINTLVL;   /**< 0x0018 Set Interrupt Level Register */
    uint32 FLR;           /**< 0x001C Interrupt Flag Register */
    uint32 INTVECT0;      /**< 0x0020 Interrupt Vector Offset 0 */
    uint32 INTVECT1;      /**< 0x0024 Interrupt Vector Offset 1 */
    uint32 FORMAT;        /**< 0x0028 Format Control Register */
    uint32 BRS;           /**< 0x002C Baud Rate Selection Register */
    uint32 ED;            /**< 0x0030 Emulation Register */
    uint32 RD;            /**< 0x0034 Receive Data Buffer */
    uint32 TD;            /**< 0x0038 Transmit Data Buffer */
    uint32 PIO0;          /**< 0x003C Pin Function Register */
    uint32 PIO1;          /**< 0x0040 Pin Direction Register */
    uint32 PIO2;          /**< 0x0044 Pin Data In Register */
    uint32 PIO3;          /**< 0x0048 Pin Data Out Register */
    uint32 PIO4;          /**< 0x004C Pin Data Set Register */
    uint32 PIO5;          /**< 0x0050 Pin Data Clr Register */
    uint32 PIO6;          /**< 0x0054: Pin Open Drain Output Enable Register */
    uint32 PIO7;          /**< 0x0058: Pin Pullup/Pulldown Disable Register */
    uint32 PIO8;          /**< 0x005C: Pin Pullup/Pulldown Selection Register */
    uint32 rsdv2[12U];    /**< 0x0060: Reserved                               */
    uint32 IODFTCTRL;     /**< 0x0090: I/O Error Enable Register */
} sciBASE_t;


/** @def sciREG
*   @brief  Register Frame Pointer
*
*   This pointer is used by the SCI driver to access the sci module registers.
*/
#define sciREG ((sciBASE_t *)0xFFF7E500U)


/** @def sciPORT
*   @brief SCI GIO Port Register Pointer
*
*   Pointer used by the GIO driver to access I/O PORT of SCI
*   (use the GIO drivers to access the port pins).
*/
#define sciPORT ((gioPORT_t *)0xFFF7E540U)


/** @def scilinREG
*   @brief SCILIN (LIN - Compatibility Mode)  Register Frame Pointer
*
*   This pointer is used by the SCI driver to access the sci module registers.
*/
#define scilinREG ((sciBASE_t *)0xFFF7E400U)


/** @def scilinPORT
*   @brief SCILIN (LIN - Compatibility Mode)  Register Frame Pointer
*
*   Pointer used by the GIO driver to access I/O PORT of LIN
*   (use the GIO drivers to access the port pins).
*/
#define scilinPORT ((gioPORT_t *)0xFFF7E440U)

/* USER CODE BEGIN (1) */
/* USER CODE END */


#endif