/* 
* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com 
* 
* 
*  Redistribution and use in source and binary forms, with or without 
*  modification, are permitted provided that the following conditions 
*  are met:
*
*    Redistributions of source code must retain the above copyright 
*    notice, this list of conditions and the following disclaimer.
*
*    Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the 
*    documentation and/or other materials provided with the   
*    distribution.
*
*    Neither the name of Texas Instruments Incorporated nor the names of
*    its contributors may be used to endorse or promote products derived
*    from this software without specific prior written permission.
*
*  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
*  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
*  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
*  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
*  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
*  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
*  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
*  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
*  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
*  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
*  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/


/**
 *  @file       usbdcdc.h
 *
 *  @brief      USBLib support for generic CDC ACM (serial) device.
 * 
 */

#ifndef __USBDCDC_H__
#define __USBDCDC_H__

/******************************************************************************
 *
 * If building with a C++ compiler, make all of the definitions in this header
 * have a C binding.
 *
 *****************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif

/** ***************************************************************************
 *
 *  \ingroup cdc_device_class_api
 *  @{
 *
 *****************************************************************************/

/******************************************************************************
 *
 * PRIVATE
 *
 * The first few sections of this header are private defines that are used by
 * the USB CDC Serial code and are here only to help with the application
 * allocating the correct amount of memory for the CDC Serial device code.
 *
 *****************************************************************************/

/******************************************************************************
 *
 * PRIVATE
 *
 * This enumeration holds the various states that the device can be in during
 * normal operation.
 *
 *****************************************************************************/
typedef enum
{
    /**
     *  @brief  Unconfigured.
     */
    CDC_STATE_UNCONFIGURED,

    /**
     *  @brief  No outstanding transaction remains to be completed.
     */
    CDC_STATE_IDLE,

    /**
     *  @brief  Waiting on completion of a send or receive transaction.
     */
    CDC_STATE_WAIT_DATA,

    /**
     *  @brief  Waiting for client to process data.
     */
    CDC_STATE_WAIT_CLIENT
}
tCDCState;

/******************************************************************************
 *
 * PRIVATE
 *
 * This structure defines the private instance data and state variables for the
 * CDC Serial device.  The memory for this structure is pointed to by the
 * psPrivateCDCSerData field in the tUSBDCDCDevice structure passed on
 * USBDCDCInit().
 *
 *****************************************************************************/
typedef struct
{
    uint32 ulUSBBase;
    tDeviceInfo *psDevInfo;
    tConfigDescriptor *psConfDescriptor;
    volatile tCDCState eCDCRxState;
    volatile tCDCState eCDCTxState;
    volatile tCDCState eCDCRequestState;
    volatile tCDCState eCDCInterruptState;
    volatile uint8 ucPendingRequest;
    uint16 usBreakDuration;
    uint16 usControlLineState;
    uint16 usSerialState;
    volatile uint32 usDeferredOpFlags;
    uint16 usLastTxSize;
    tLineCoding sLineCoding;
    volatile tBoolean bRxBlocked;
    volatile tBoolean bControlBlocked;
    volatile tBoolean bConnected;
    uint8 ucControlEndpoint;
    uint8 ucBulkINEndpoint;
    uint8 ucBulkOUTEndpoint;
    uint8 ucInterfaceControl;
    uint8 ucInterfaceData;
}
tCDCSerInstance;


#ifndef DEPRECATED
/** ***************************************************************************
 *
 *  @brief  The number of bytes of workspace required by the CDC device class 
 *          driver. The client must provide a block of RAM of at least this 
 *          size in the psPrivateCDCSerData field of the tUSBCDCDevice 
 *          structure passed on USBDCDCInit().
 *
 *          This value is deprecated and should not be used, any new code 
 *          should just pass in a tUSBCDCDevice structure in the 
 *          psPrivateCDCSerData field.
 *
 *****************************************************************************/
#define USB_CDCSER_WORKSPACE_SIZE (sizeof(tCDCSerInstance))
#endif

/** ***************************************************************************
 *
 * The following defines are used when working with composite devices.
 *
 *****************************************************************************/

/** ***************************************************************************
 *
 *  @brief  The size of the memory that should be allocated to create a 
 *          configuration descriptor for a single instance of the USB Serial 
 *          CDC Device. This does not include the configuration descriptor 
 *          which is automatically ignored by the composite device class.
 *
 *          For reference this is sizeof(g_pIADSerDescriptor) +
 *          sizeof(g_pCDCSerCommInterface) + sizeof(g_pCDCSerDataInterface)
 *
 *****************************************************************************/
#define COMPOSITE_DCDC_SIZE     (8u + 35u + 23u)

/** ***************************************************************************
 *
 * CDC-specific events These events are provided to the application in the
 * \e ulMsg parameter of the tUSBCallback function.
 *
 *****************************************************************************/

/** ***************************************************************************
 *
 *  @brief  The host requests that the device send a BREAK condition on its
 *          serial communication channel.  The BREAK should remain active until
 *          a USBD_CDC_EVENT_CLEAR_BREAK event is received.
 */
#define USBD_CDC_EVENT_SEND_BREAK (USBD_CDC_EVENT_BASE + 0u)

/** ***************************************************************************
 *
 *  @brief  The host requests that the device stop sending a BREAK condition on
 *          its serial communication channel.
 */
#define USBD_CDC_EVENT_CLEAR_BREAK (USBD_CDC_EVENT_BASE + 1u)

/** ***************************************************************************
 *
 *  @brief  The host requests that the device set the RS232 signaling lines to
 *          a particular state.  The ulMsgValue parameter contains the RTS and
 *          DTR control line states as defined in table 51 of the USB CDC class
 *          definition and is a combination of the following values:
 *
 *         (RTS) USB_CDC_DEACTIVATE_CARRIER or USB_CDC_ACTIVATE_CARRIER
 *         (DTR) USB_CDC_DTE_NOT_PRESENT or USB_CDC_DTE_PRESENT
 */
#define USBD_CDC_EVENT_SET_CONTROL_LINE_STATE (USBD_CDC_EVENT_BASE + 2u)

/** ***************************************************************************
 *
 *  @brief  The host requests that the device set the RS232 communication
 *          parameters.  The pvMsgData parameter points to a tLineCoding 
 *          structure defining the required number of bits per character, 
 *          parity mode, number of stop bits and the baud rate.
 */
#define USBD_CDC_EVENT_SET_LINE_CODING (USBD_CDC_EVENT_BASE + 3u)

/** ***************************************************************************
 *
 *  @brief  The host is querying the current RS232 communication parameters.  
 *          The pvMsgData parameter points to a tLineCoding structure that the
 *          application must fill with the current settings prior to returning
 *          from the callback.
 */
#define USBD_CDC_EVENT_GET_LINE_CODING (USBD_CDC_EVENT_BASE + 4u)

/** ***************************************************************************
 *
 *  @brief  The structure used by the application to define operating 
 *          parameters for the CDC device.
 *
 *****************************************************************************/
typedef struct
{
    /**
     *  @brief  The vendor ID that this device is to present in the device 
     *          descriptor.
     */
    uint16 usVID;

    /**
     *  @brief  The product ID that this device is to present in the device 
     *          descriptor.
     */
    uint16 usPID;

    /**
     *  @brief  The maximum power consumption of the device, expressed in 
     *          milliamps.
     */
    uint16 usMaxPowermA;

    /**
     *  @brief  Indicates whether the device is self- or bus-powered and 
     *          whether or not it supports remote wakeup.  Valid values are 
     *          USB_CONF_ATTR_SELF_PWR or USB_CONF_ATTR_BUS_PWR, optionally 
     *          ORed with USB_CONF_ATTR_RWAKE.
     */
    uint8 ucPwrAttributes;

    /**
     *  @brief  A pointer to the callback function which will be called to 
     *          notify the application of all asynchronous control events 
     *          related to the operation of the device.
     */
    tUSBCallback pfnControlCallback;

    /**
     *  @brief  A client-supplied pointer which will be sent as the first
     *          parameter in all calls made to the control channel callback,
     *          pfnControlCallback.
     */
    void *pvControlCBData;

    /**
     *  @brief  A pointer to the callback function which will be called to 
     *          notify the application of events related to the device's data 
     *          receive channel.
     */
    tUSBCallback pfnRxCallback;

    /**
     *  @brief  A client-supplied pointer which will be sent as the first
     *          parameter in all calls made to the receive channel callback,
     *          pfnRxCallback.
     */
    void *pvRxCBData;

    /**
     *  @brief  A pointer to the callback function which will be called to 
     *          notify the application of events related to the device's data 
     *          transmit channel.
     */
    tUSBCallback pfnTxCallback;

    /**
     *  @brief  A client-supplied pointer which will be sent as the first
     *          parameter in all calls made to the transmit channel callback,
     *          pfnTxCallback.
     */
    void *pvTxCBData;

    /**
     *  @brief  A pointer to the string descriptor array for this device.  This
     *          array must contain the following string descriptor pointers in
     *          this order. Language descriptor, Manufacturer name string 
     *          (language 1), Product name string (language 1), Serial number 
     *          Control interface description string (language 1), 
     *          Configuration description string (language 1).
     * 
     *          If supporting more than 1 language, the strings for indices 
     *          1 through 5 must be repeated for each of the other languages 
     *          defined in the language descriptor.
     */
    const uint8 * const *ppStringDescriptors;

    /**
     *  @brief  The number of descriptors provided in the ppStringDescriptors
     *          array.  This must be 1 + (5 * number of supported languages).
     */
    uint32 ulNumStringDescriptors;

    /**
     *  @brief  A pointer to the private instance data for this device.  This 
     *          memory must remain accessible for as long as the CDC device is
     *          in use and must not be modified by any code outside the CDC 
     *          class driver.
     */
    tCDCSerInstance *psPrivateCDCSerData;
}
tUSBDCDCDevice;

extern tDeviceInfo g_sCDCSerDeviceInfo;

/** ***************************************************************************
 *
 * API Function Prototypes
 *
 *****************************************************************************/
extern void * USBDCDCCompositeInit(uint32 ulIndex,
                                   const tUSBDCDCDevice *psCDCDevice);
extern void *USBDCDCInit(uint32 ulIndex,
                         const tUSBDCDCDevice *psCDCDevice);
extern void USBDCDCTerm(void *pvInstance);
extern void *USBDCDCSetControlCBData(tUSBDCDCDevice *pvInstance, void *pvCBData);
extern void *USBDCDCSetRxCBData(void *pvInstance, void *pvCBData);
extern void *USBDCDCSetTxCBData(void *pvInstance, void *pvCBData);
extern uint32 USBDCDCPacketWrite(void *pvInstance,
                                        uint8 *pcData,
                                        uint32 ulLength,
                                        tBoolean bLast);
extern uint32 USBDCDCPacketRead(void *pvInstance,
                                       uint8 *pcData,
                                       uint32 ulLength,
                                       tBoolean bLast);
extern uint32 USBDCDCTxPacketAvailable(void *pvInstance);
extern uint32 USBDCDCRxPacketAvailable(void *pvInstance);
extern void USBDCDCSerialStateChange(void *pvInstance,
                                     uint16 usState);
extern void USBDCDCPowerStatusSet(void *pvInstance, uint8 ucPower);
extern tBoolean USBDCDCRemoteWakeupRequest(void *pvInstance);

/** ***************************************************************************
 *
 *  Close the Doxygen group.
 *  @}
 *
 *****************************************************************************/

/******************************************************************************
 *
 * Mark the end of the C bindings section for C++ compilers.
 *
 *****************************************************************************/
#ifdef __cplusplus
}
#endif

#endif /* __USBDCDC_H__ */