/** * Copyright (C) 2018 - 2019 Bosch Sensortec GmbH * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * Neither the name of the copyright holder nor the names of the * contributors may be used to endorse or promote products derived from * this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDER * OR CONTRIBUTORS BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, * OR CONSEQUENTIAL DAMAGES(INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE * * The information provided is believed to be accurate and reliable. * The copyright holder assumes no responsibility * for the consequences of use * of such information nor for any infringement of patents or * other rights of third parties which may result from its use. * No license is granted by implication or otherwise under any patent or * patent rights of the copyright holder. * * @file bme280_defs.h * @date 26 Aug 2019 * @version 3.3.7 * @brief * */ /*! @file bme280_defs.h * @brief Sensor driver for BME280 sensor */ /*! * @defgroup BME280 SENSOR API * @brief */ #ifndef BME280_DEFS_H_ #define BME280_DEFS_H_ /********************************************************/ /* header includes */ #ifdef __KERNEL__ #include #include #else #include #include #endif /********************************************************/ /*! @name Common macros */ /********************************************************/ #if !defined(UINT8_C) && !defined(INT8_C) #define INT8_C(x) S8_C(x) #define UINT8_C(x) U8_C(x) #endif #if !defined(UINT16_C) && !defined(INT16_C) #define INT16_C(x) S16_C(x) #define UINT16_C(x) U16_C(x) #endif #if !defined(INT32_C) && !defined(UINT32_C) #define INT32_C(x) S32_C(x) #define UINT32_C(x) U32_C(x) #endif #if !defined(INT64_C) && !defined(UINT64_C) #define INT64_C(x) S64_C(x) #define UINT64_C(x) U64_C(x) #endif /**@}*/ /**\name C standard macros */ #ifndef NULL #ifdef __cplusplus #define NULL 0 #else #define NULL ((void *) 0) #endif #endif /********************************************************/ #ifndef BME280_FLOAT_ENABLE /* #define BME280_FLOAT_ENABLE */ #endif #ifndef BME280_FLOAT_ENABLE #ifndef BME280_64BIT_ENABLE #define BME280_64BIT_ENABLE #endif #endif #ifndef TRUE #define TRUE UINT8_C(1) #endif #ifndef FALSE #define FALSE UINT8_C(0) #endif /**\name I2C addresses */ #define BME280_I2C_ADDR_PRIM UINT8_C(0x76) #define BME280_I2C_ADDR_SEC UINT8_C(0x77) /**\name BME280 chip identifier */ #define BME280_CHIP_ID UINT8_C(0x60) /**\name Register Address */ #define BME280_CHIP_ID_ADDR UINT8_C(0xD0) #define BME280_RESET_ADDR UINT8_C(0xE0) #define BME280_TEMP_PRESS_CALIB_DATA_ADDR UINT8_C(0x88) #define BME280_HUMIDITY_CALIB_DATA_ADDR UINT8_C(0xE1) #define BME280_PWR_CTRL_ADDR UINT8_C(0xF4) #define BME280_CTRL_HUM_ADDR UINT8_C(0xF2) #define BME280_CTRL_MEAS_ADDR UINT8_C(0xF4) #define BME280_CONFIG_ADDR UINT8_C(0xF5) #define BME280_DATA_ADDR UINT8_C(0xF7) /**\name API success code */ #define BME280_OK INT8_C(0) /**\name API error codes */ #define BME280_E_NULL_PTR INT8_C(-1) #define BME280_E_DEV_NOT_FOUND INT8_C(-2) #define BME280_E_INVALID_LEN INT8_C(-3) #define BME280_E_COMM_FAIL INT8_C(-4) #define BME280_E_SLEEP_MODE_FAIL INT8_C(-5) #define BME280_E_NVM_COPY_FAILED INT8_C(-6) /**\name API warning codes */ #define BME280_W_INVALID_OSR_MACRO INT8_C(1) /**\name Macros related to size */ #define BME280_TEMP_PRESS_CALIB_DATA_LEN UINT8_C(26) #define BME280_HUMIDITY_CALIB_DATA_LEN UINT8_C(7) #define BME280_P_T_H_DATA_LEN UINT8_C(8) /**\name Sensor power modes */ #define BME280_SLEEP_MODE UINT8_C(0x00) #define BME280_FORCED_MODE UINT8_C(0x01) #define BME280_NORMAL_MODE UINT8_C(0x03) /**\name Macro to combine two 8 bit data's to form a 16 bit data */ #define BME280_CONCAT_BYTES(msb, lsb) (((uint16_t)msb << 8) | (uint16_t)lsb) #define BME280_SET_BITS(reg_data, bitname, data) \ ((reg_data & ~(bitname##_MSK)) | \ ((data << bitname##_POS) & bitname##_MSK)) #define BME280_SET_BITS_POS_0(reg_data, bitname, data) \ ((reg_data & ~(bitname##_MSK)) | \ (data & bitname##_MSK)) #define BME280_GET_BITS(reg_data, bitname) ((reg_data & (bitname##_MSK)) >> \ (bitname##_POS)) #define BME280_GET_BITS_POS_0(reg_data, bitname) (reg_data & (bitname##_MSK)) /**\name Macros for bit masking */ #define BME280_SENSOR_MODE_MSK UINT8_C(0x03) #define BME280_SENSOR_MODE_POS UINT8_C(0x00) #define BME280_CTRL_HUM_MSK UINT8_C(0x07) #define BME280_CTRL_HUM_POS UINT8_C(0x00) #define BME280_CTRL_PRESS_MSK UINT8_C(0x1C) #define BME280_CTRL_PRESS_POS UINT8_C(0x02) #define BME280_CTRL_TEMP_MSK UINT8_C(0xE0) #define BME280_CTRL_TEMP_POS UINT8_C(0x05) #define BME280_FILTER_MSK UINT8_C(0x1C) #define BME280_FILTER_POS UINT8_C(0x02) #define BME280_STANDBY_MSK UINT8_C(0xE0) #define BME280_STANDBY_POS UINT8_C(0x05) /**\name Sensor component selection macros * These values are internal for API implementation. Don't relate this to * data sheet. */ #define BME280_PRESS UINT8_C(1) #define BME280_TEMP UINT8_C(1 << 1) #define BME280_HUM UINT8_C(1 << 2) #define BME280_ALL UINT8_C(0x07) /**\name Settings selection macros */ #define BME280_OSR_PRESS_SEL UINT8_C(1) #define BME280_OSR_TEMP_SEL UINT8_C(1 << 1) #define BME280_OSR_HUM_SEL UINT8_C(1 << 2) #define BME280_FILTER_SEL UINT8_C(1 << 3) #define BME280_STANDBY_SEL UINT8_C(1 << 4) #define BME280_ALL_SETTINGS_SEL UINT8_C(0x1F) /**\name Oversampling macros */ #define BME280_NO_OVERSAMPLING UINT8_C(0x00) #define BME280_OVERSAMPLING_1X UINT8_C(0x01) #define BME280_OVERSAMPLING_2X UINT8_C(0x02) #define BME280_OVERSAMPLING_4X UINT8_C(0x03) #define BME280_OVERSAMPLING_8X UINT8_C(0x04) #define BME280_OVERSAMPLING_16X UINT8_C(0x05) /**\name Standby duration selection macros */ #define BME280_STANDBY_TIME_0_5_MS (0x00) #define BME280_STANDBY_TIME_62_5_MS (0x01) #define BME280_STANDBY_TIME_125_MS (0x02) #define BME280_STANDBY_TIME_250_MS (0x03) #define BME280_STANDBY_TIME_500_MS (0x04) #define BME280_STANDBY_TIME_1000_MS (0x05) #define BME280_STANDBY_TIME_10_MS (0x06) #define BME280_STANDBY_TIME_20_MS (0x07) /**\name Filter coefficient selection macros */ #define BME280_FILTER_COEFF_OFF (0x00) #define BME280_FILTER_COEFF_2 (0x01) #define BME280_FILTER_COEFF_4 (0x02) #define BME280_FILTER_COEFF_8 (0x03) #define BME280_FILTER_COEFF_16 (0x04) #define BME280_STATUS_REG_ADDR (0xF3) #define BME280_SOFT_RESET_COMMAND (0xB6) #define BME280_STATUS_IM_UPDATE (0x01) /*! * @brief Interface selection Enums */ enum bme280_intf { /*! SPI interface */ BME280_SPI_INTF, /*! I2C interface */ BME280_I2C_INTF }; /*! * @brief Type definitions */ typedef int8_t (*bme280_com_fptr_t)(uint8_t dev_id, uint8_t reg_addr, uint8_t *data, uint16_t len); typedef void (*bme280_delay_fptr_t)(uint32_t period); /*! * @brief Calibration data */ struct bme280_calib_data { /** * @ Trim Variables */ /**@{*/ uint16_t dig_T1; int16_t dig_T2; int16_t dig_T3; uint16_t dig_P1; int16_t dig_P2; int16_t dig_P3; int16_t dig_P4; int16_t dig_P5; int16_t dig_P6; int16_t dig_P7; int16_t dig_P8; int16_t dig_P9; uint8_t dig_H1; int16_t dig_H2; uint8_t dig_H3; int16_t dig_H4; int16_t dig_H5; int8_t dig_H6; int32_t t_fine; /**@}*/ }; /*! * @brief bme280 sensor structure which comprises of temperature, pressure and * humidity data */ #ifdef BME280_FLOAT_ENABLE struct bme280_data { /*! Compensated pressure */ double pressure; /*! Compensated temperature */ double temperature; /*! Compensated humidity */ double humidity; }; #else struct bme280_data { /*! Compensated pressure */ uint32_t pressure; /*! Compensated temperature */ int32_t temperature; /*! Compensated humidity */ uint32_t humidity; }; #endif /* BME280_USE_FLOATING_POINT */ /*! * @brief bme280 sensor structure which comprises of uncompensated temperature, * pressure and humidity data */ struct bme280_uncomp_data { /*! un-compensated pressure */ uint32_t pressure; /*! un-compensated temperature */ uint32_t temperature; /*! un-compensated humidity */ uint32_t humidity; }; /*! * @brief bme280 sensor settings structure which comprises of mode, * oversampling and filter settings. */ struct bme280_settings { /*! pressure oversampling */ uint8_t osr_p; /*! temperature oversampling */ uint8_t osr_t; /*! humidity oversampling */ uint8_t osr_h; /*! filter coefficient */ uint8_t filter; /*! standby time */ uint8_t standby_time; }; #endif /* BME280_DEFS_H_ */ /** @}*/ /** @}*/