diff options
Diffstat (limited to 'bin')
| -rw-r--r-- | bin/Proof_Of_Concept_PELT.py | 523 | ||||
| -rw-r--r-- | bin/plot_generator.py | 54 |
2 files changed, 374 insertions, 203 deletions
diff --git a/bin/Proof_Of_Concept_PELT.py b/bin/Proof_Of_Concept_PELT.py index 688c5a7..f0ecfc2 100644 --- a/bin/Proof_Of_Concept_PELT.py +++ b/bin/Proof_Of_Concept_PELT.py @@ -27,10 +27,10 @@ from dfatool.validation import CrossValidator # helper functions. Not used def plot_data_from_json(filename, trace_num, x_axis, y_axis): - with open(filename, 'r') as file: + with open(filename, "r") as file: tx_data = json.load(file) - print(tx_data[trace_num]['parameter']) - plt.plot(tx_data[trace_num]['offline'][0]['uW']) + print(tx_data[trace_num]["parameter"]) + plt.plot(tx_data[trace_num]["offline"][0]["uW"]) plt.xlabel(x_axis) plt.ylabel(y_axis) plt.show() @@ -49,12 +49,12 @@ def plot_data_vs_data_vs_means(signal1, signal2, x_axis, y_axis): plt.plot(signal1) lens = max(len(signal1), len(signal2)) average = np.mean(signal1) - plt.hlines(average, 0, lens, color='red') - plt.vlines(len(signal1), 0, 100000, color='red', linestyles='dashed') + plt.hlines(average, 0, lens, color="red") + plt.vlines(len(signal1), 0, 100000, color="red", linestyles="dashed") plt.plot(signal2) average = np.mean(signal2) - plt.hlines(average, 0, lens, color='green') - plt.vlines(len(signal2), 0, 100000, color='green', linestyles='dashed') + plt.hlines(average, 0, lens, color="green") + plt.vlines(len(signal2), 0, 100000, color="green", linestyles="dashed") plt.xlabel(x_axis) plt.ylabel(y_axis) plt.show() @@ -72,7 +72,7 @@ def get_bkps(algo, pen, q): # Wrapper for kneedle -def find_knee_point(data_x, data_y, S=1.0, curve='convex', direction='decreasing'): +def find_knee_point(data_x, data_y, S=1.0, curve="convex", direction="decreasing"): kneedle = KneeLocator(data_x, data_y, S=S, curve=curve, direction=direction) kneepoint = (kneedle.knee, kneedle.knee_y) return kneepoint @@ -111,9 +111,20 @@ def calc_pelt(signal, penalty, model="l1", jump=5, min_dist=2, plotting=False): # pen_modifier is used as a factor on the resulting penalty. # the interval [range_min, range_max] is used for searching. # refresh_delay and refresh_thresh are used to configure the progress "bar". -def calculate_penalty_value(signal, model="l1", jump=5, min_dist=2, range_min=0, range_max=50, - num_processes=8, refresh_delay=1, refresh_thresh=5, S=1.0, - pen_modifier=None, show_plots=False): +def calculate_penalty_value( + signal, + model="l1", + jump=5, + min_dist=2, + range_min=0, + range_max=50, + num_processes=8, + refresh_delay=1, + refresh_thresh=5, + S=1.0, + pen_modifier=None, + show_plots=False, +): # default params in Function if model is None: model = "l1" @@ -206,7 +217,7 @@ def calculate_penalty_value(signal, model="l1", jump=5, min_dist=2, range_min=0, longest_start = -1 longest_end = -1 prev_val = -1 - for i, num_bkpts in enumerate(fitted_bkps_val[knee[0]:]): + for i, num_bkpts in enumerate(fitted_bkps_val[knee[0] :]): if num_bkpts != prev_val: end_index = i - 1 if end_index - start_index > longest_end - longest_start: @@ -214,7 +225,7 @@ def calculate_penalty_value(signal, model="l1", jump=5, min_dist=2, range_min=0, longest_start = start_index longest_end = end_index start_index = i - if i == len(fitted_bkps_val[knee[0]:]) - 1: + if i == len(fitted_bkps_val[knee[0] :]) - 1: # end sequence with last value end_index = i # # since it is not guaranteed that this is the end of the plateau, assume the mid @@ -230,11 +241,15 @@ def calculate_penalty_value(signal, model="l1", jump=5, min_dist=2, range_min=0, start_index = i prev_val = num_bkpts if show_plots: - plt.xlabel('Penalty') - plt.ylabel('Number of Changepoints') + plt.xlabel("Penalty") + plt.ylabel("Number of Changepoints") plt.plot(pen_val, fitted_bkps_val) - plt.vlines(longest_start + knee[0], 0, max(fitted_bkps_val), linestyles='dashed') - plt.vlines(longest_end + knee[0], 0, max(fitted_bkps_val), linestyles='dashed') + plt.vlines( + longest_start + knee[0], 0, max(fitted_bkps_val), linestyles="dashed" + ) + plt.vlines( + longest_end + knee[0], 0, max(fitted_bkps_val), linestyles="dashed" + ) plt.show() # choosing pen from plateau mid_of_plat = longest_start + (longest_end - longest_start) // 2 @@ -250,8 +265,11 @@ def calculate_penalty_value(signal, model="l1", jump=5, min_dist=2, range_min=0, if knee[0] is not None: return knee - print_error("With the current thresh-hold S=" + str(S) - + " it is not possible to select a penalty value.") + print_error( + "With the current thresh-hold S=" + + str(S) + + " it is not possible to select a penalty value." + ) sys.exit(-1) @@ -260,7 +278,7 @@ def calculate_penalty_value(signal, model="l1", jump=5, min_dist=2, range_min=0, # penalty, model and jump are directly passed to pelt def calc_raw_states_func(num_measurement, measurement, penalty, model, jump): # extract signal - signal = np.array(measurement['uW']) + signal = np.array(measurement["uW"]) # norm signal to remove dependency on absolute values normed_signal = norm_signal(signal) # calculate the breakpoints @@ -274,7 +292,7 @@ def calc_raw_states_func(num_measurement, measurement, penalty, model, jump): # (Transitions are instantaneous) start_time = end_time end_time = bkpt - power_vals = signal[start_time: end_time] + power_vals = signal[start_time:end_time] mean_power = np.mean(power_vals) std_dev = np.std(power_vals) calced_state = (start_time, end_time, mean_power, std_dev) @@ -294,7 +312,7 @@ def calc_raw_states_func(num_measurement, measurement, penalty, model, jump): new_avg_std = new_avg_std / len(calced_states) else: new_avg_std = 0 - change_avg_std = measurement['uW_std'] - new_avg_std + change_avg_std = measurement["uW_std"] - new_avg_std # print_info("The average standard deviation for the newly found states is " # + str(new_avg_std)) # print_info("That is a reduction of " + str(change_avg_std)) @@ -318,7 +336,9 @@ def needs_refinement(signal, thresh): percentile_size = int() percentile_size = length_of_signal // 100 lower_percentile = sorted_signal[0:percentile_size] - upper_percentile = sorted_signal[length_of_signal - percentile_size: length_of_signal] + upper_percentile = sorted_signal[ + length_of_signal - percentile_size : length_of_signal + ] lower_percentile_mean = np.mean(lower_percentile) upper_percentile_mean = np.mean(upper_percentile) median = np.median(sorted_signal) @@ -330,22 +350,23 @@ def needs_refinement(signal, thresh): return True return False + # helper functions for user output # TODO: maybe switch with python logging feature def print_info(str_to_prt): - str_lst = str_to_prt.split(sep='\n') + str_lst = str_to_prt.split(sep="\n") for str_prt in str_lst: print("[INFO]" + str_prt) def print_warning(str_to_prt): - str_lst = str_to_prt.split(sep='\n') + str_lst = str_to_prt.split(sep="\n") for str_prt in str_lst: print("[WARNING]" + str_prt) def print_error(str_to_prt): - str_lst = str_to_prt.split(sep='\n') + str_lst = str_to_prt.split(sep="\n") for str_prt in str_lst: print("[ERROR]" + str_prt, file=sys.stderr) @@ -383,7 +404,7 @@ def get_state_num(state_name, distinct_states): return -1 -if __name__ == '__main__': +if __name__ == "__main__": # OPTION RECOGNITION opt = dict() @@ -429,87 +450,87 @@ if __name__ == '__main__': optname = re.sub(r"^--", "", option) opt[optname] = parameter - if 'filename' not in opt: + if "filename" not in opt: print_error("No file specified!") sys.exit(-1) else: - opt_filename = opt['filename'] - if 'v' in opt: + opt_filename = opt["filename"] + if "v" in opt: opt_verbose = True opt_plotting = True - if 'model' in opt: - opt_model = opt['model'] - if 'jump' in opt: + if "model" in opt: + opt_model = opt["model"] + if "jump" in opt: try: - opt_jump = int(opt['jump']) + opt_jump = int(opt["jump"]) except ValueError as verr: print(verr, file=sys.stderr) sys.exit(-1) - if 'min_dist' in opt: + if "min_dist" in opt: try: - opt_min_dist = int(opt['min_dist']) + opt_min_dist = int(opt["min_dist"]) except ValueError as verr: print(verr, file=sys.stderr) sys.exit(-1) - if 'range_min' in opt: + if "range_min" in opt: try: - opt_range_min = int(opt['range_min']) + opt_range_min = int(opt["range_min"]) except ValueError as verr: print(verr, file=sys.stderr) sys.exit(-1) - if 'range_max' in opt: + if "range_max" in opt: try: - opt_range_max = int(opt['range_max']) + opt_range_max = int(opt["range_max"]) except ValueError as verr: print(verr, file=sys.stderr) sys.exit(-1) - if 'num_processes' in opt: + if "num_processes" in opt: try: - opt_num_processes = int(opt['num_processes']) + opt_num_processes = int(opt["num_processes"]) except ValueError as verr: print(verr, file=sys.stderr) sys.exit(-1) - if 'refresh_delay' in opt: + if "refresh_delay" in opt: try: - opt_refresh_delay = int(opt['refresh_delay']) + opt_refresh_delay = int(opt["refresh_delay"]) except ValueError as verr: print(verr, file=sys.stderr) sys.exit(-1) - if 'refresh_thresh' in opt: + if "refresh_thresh" in opt: try: - opt_refresh_thresh = int(opt['refresh_thresh']) + opt_refresh_thresh = int(opt["refresh_thresh"]) except ValueError as verr: print(verr, file=sys.stderr) sys.exit(-1) - if 'S' in opt: + if "S" in opt: try: - opt_S = float(opt['S']) + opt_S = float(opt["S"]) except ValueError as verr: print(verr, file=sys.stderr) sys.exit(-1) - if 'pen_override' in opt: + if "pen_override" in opt: try: - opt_pen_override = int(opt['pen_override']) + opt_pen_override = int(opt["pen_override"]) except ValueError as verr: print(verr, file=sys.stderr) sys.exit(-1) - if 'pen_modifier' in opt: + if "pen_modifier" in opt: try: - opt_pen_modifier = float(opt['pen_modifier']) + opt_pen_modifier = float(opt["pen_modifier"]) except ValueError as verr: print(verr, file=sys.stderr) sys.exit(-1) - if 'refinement_thresh' in opt: + if "refinement_thresh" in opt: try: - opt_refinement_thresh = int(opt['refinement_thresh']) + opt_refinement_thresh = int(opt["refinement_thresh"]) except ValueError as verr: print(verr, file=sys.stderr) sys.exit(-1) - if 'cache_dicts' in opt: - if 'cache_loc' in opt: - opt_cache_loc = opt['cache_loc'] + if "cache_dicts" in opt: + if "cache_loc" in opt: + opt_cache_loc = opt["cache_loc"] else: - print_error("If \"cache_dicts\" is set, \"cache_loc\" must be provided.") + print_error('If "cache_dicts" is set, "cache_loc" must be provided.') sys.exit(-1) except getopt.GetoptError as err: print(err, file=sys.stderr) @@ -519,8 +540,11 @@ if __name__ == '__main__': if ".json" in opt_filename: # open file with trace data from json print_info( - "Will only refine the state which is present in " + opt_filename + " if necessary.") - with open(opt_filename, 'r') as f: + "Will only refine the state which is present in " + + opt_filename + + " if necessary." + ) + with open(opt_filename, "r") as f: configurations = json.load(f) # for i in range(0, 7): @@ -562,57 +586,78 @@ if __name__ == '__main__': if flag: print_info("The cache will be build.") else: - print_warning("THE OPTION \"cache_dicts\" IS FOR DEBUGGING PURPOSES ONLY! " - "\nDO NOT USE FOR REGULAR APPLICATIONS!" - "\nThis will possibly not be maintained in further development.") + print_warning( + 'THE OPTION "cache_dicts" IS FOR DEBUGGING PURPOSES ONLY! ' + "\nDO NOT USE FOR REGULAR APPLICATIONS!" + "\nThis will possibly not be maintained in further development." + ) from_cache = True - big_state_name = configurations[0]['name'] + big_state_name = configurations[0]["name"] if None in (by_param_file, by_name_file, param_names_file): state_durations_by_config = [] state_consumptions_by_config = [] # loop through all traces check if refinement is necessary and if necessary refine it. for num_config, measurements_by_config in enumerate(configurations): # loop through all occurrences of the looked at state - print_info("Looking at state '" + measurements_by_config['name'] + "' with params: " - + str(measurements_by_config['parameter']) + "(" + str( - num_config + 1) + "/" - + str(len(configurations)) + ")") + print_info( + "Looking at state '" + + measurements_by_config["name"] + + "' with params: " + + str(measurements_by_config["parameter"]) + + "(" + + str(num_config + 1) + + "/" + + str(len(configurations)) + + ")" + ) num_needs_refine = 0 print_info("Checking if refinement is necessary...") - for measurement in measurements_by_config['offline']: + for measurement in measurements_by_config["offline"]: # loop through measurements of particular state # an check if state needs refinement - signal = measurement['uW'] + signal = measurement["uW"] # mean = measurement['uW_mean'] if needs_refinement(signal, opt_refinement_thresh): num_needs_refine = num_needs_refine + 1 if num_needs_refine == 0: print_info( - "No refinement necessary for state '" + measurements_by_config['name'] - + "' with params: " + str(measurements_by_config['parameter'])) - elif num_needs_refine < len(measurements_by_config['offline']) / 2: + "No refinement necessary for state '" + + measurements_by_config["name"] + + "' with params: " + + str(measurements_by_config["parameter"]) + ) + elif num_needs_refine < len(measurements_by_config["offline"]) / 2: print_info( - "No refinement necessary for state '" + measurements_by_config['name'] - + "' with params: " + str(measurements_by_config['parameter'])) + "No refinement necessary for state '" + + measurements_by_config["name"] + + "' with params: " + + str(measurements_by_config["parameter"]) + ) print_warning( "However this decision was not unanimously. This could hint a poor" - "measurement quality.") + "measurement quality." + ) else: - if num_needs_refine != len(measurements_by_config['parameter']): + if num_needs_refine != len(measurements_by_config["parameter"]): print_warning( "However this decision was not unanimously. This could hint a poor" - "measurement quality.") + "measurement quality." + ) # assume that all measurements of the same param configuration are fundamentally # similar -> calculate penalty for first measurement, use it for all if opt_pen_override is None: - signal = np.array(measurements_by_config['offline'][0]['uW']) + signal = np.array(measurements_by_config["offline"][0]["uW"]) normed_signal = norm_signal(signal) - penalty = calculate_penalty_value(normed_signal, model=opt_model, - range_min=opt_range_min, - range_max=opt_range_max, - num_processes=opt_num_processes, - jump=opt_jump, S=opt_S, - pen_modifier=opt_pen_modifier) + penalty = calculate_penalty_value( + normed_signal, + model=opt_model, + range_min=opt_range_min, + range_max=opt_range_max, + num_processes=opt_num_processes, + jump=opt_jump, + S=opt_S, + pen_modifier=opt_pen_modifier, + ) penalty = penalty[0] else: penalty = opt_pen_override @@ -620,12 +665,16 @@ if __name__ == '__main__': print_info("Starting raw_states calculation.") raw_states_calc_args = [] for num_measurement, measurement in enumerate( - measurements_by_config['offline']): - raw_states_calc_args.append((num_measurement, measurement, penalty, - opt_model, opt_jump)) + measurements_by_config["offline"] + ): + raw_states_calc_args.append( + (num_measurement, measurement, penalty, opt_model, opt_jump) + ) - raw_states_list = [None] * len(measurements_by_config['offline']) - raw_states_res = calc_raw_states(raw_states_calc_args, opt_num_processes) + raw_states_list = [None] * len(measurements_by_config["offline"]) + raw_states_res = calc_raw_states( + raw_states_calc_args, opt_num_processes + ) # extracting result and putting it in correct order -> index of raw_states_list # entry still corresponds with index of measurement in measurements_by_states # -> If measurements are discarded the used ones are easily recognized @@ -637,9 +686,13 @@ if __name__ == '__main__': # FIXME: Wieso gibt mir meine IDE hier eine Warning aus? Der Index müsste doch # int sein oder nicht? Es scheint auch vernünftig zu klappen... raw_states_list[num_measurement] = raw_states - print_info("The average standard deviation for the newly found states in " - + "measurement No. " + str(num_measurement) + " is " - + str(avg_std)) + print_info( + "The average standard deviation for the newly found states in " + + "measurement No. " + + str(num_measurement) + + " is " + + str(avg_std) + ) print_info("That is a reduction of " + str(change_avg_std)) # l_signal = measurements_by_config['offline'][num_measurement]['uW'] # l_bkpts = [s[1] for s in raw_states] @@ -652,15 +705,21 @@ if __name__ == '__main__': num_states_array[i] = len(x) avg_num_states = np.mean(num_states_array) num_states_dev = np.std(num_states_array) - print_info("On average " + str(avg_num_states) - + " States have been found. The standard deviation" - + " is " + str(num_states_dev)) + print_info( + "On average " + + str(avg_num_states) + + " States have been found. The standard deviation" + + " is " + + str(num_states_dev) + ) # TODO: MAGIC NUMBER if num_states_dev > 1: - print_warning("The number of states varies strongly across measurements." - " Consider choosing a larger range for penalty detection." - " It is also possible, that the processed data is not accurate" - " enough to produce proper results.") + print_warning( + "The number of states varies strongly across measurements." + " Consider choosing a larger range for penalty detection." + " It is also possible, that the processed data is not accurate" + " enough to produce proper results." + ) time.sleep(5) # TODO: Wie bekomme ich da jetzt raus, was die Wahrheit ist? # Einfach Durchschnitt nehmen? @@ -668,11 +727,14 @@ if __name__ == '__main__': # frequent state count counts = np.bincount(num_states_array) num_raw_states = np.argmax(counts) - print_info("Choose " + str(num_raw_states) + " as number of raw_states.") + print_info( + "Choose " + str(num_raw_states) + " as number of raw_states." + ) if num_raw_states == 1: print_info( "Upon further inspection it is clear that no refinement is necessary." - " The macromodel is usable for this configuration.") + " The macromodel is usable for this configuration." + ) continue # iterate through all found breakpoints and determine start and end points as well # as power consumption @@ -687,8 +749,12 @@ if __name__ == '__main__': if len(raw_states) == num_raw_states: num_used_measurements = num_used_measurements + 1 for num_state, s in enumerate(raw_states): - states_duration_list[num_state][num_measurement] = s[1] - s[0] - states_consumption_list[num_state][num_measurement] = s[2] + states_duration_list[num_state][num_measurement] = ( + s[1] - s[0] + ) + states_consumption_list[num_state][num_measurement] = s[ + 2 + ] # calced_state = (start_time, end_time, mean_power, std_dev) # for num_state, s in enumerate(raw_states): # state_duration = s[1] - s[0] @@ -698,9 +764,12 @@ if __name__ == '__main__': # states_consumption_list[num_state] = \ # states_consumption_list[num_state] + state_consumption else: - print_info("Discarding measurement No. " + str(num_measurement) - + " because it did not recognize the number of " - "raw_states correctly.") + print_info( + "Discarding measurement No. " + + str(num_measurement) + + " because it did not recognize the number of " + "raw_states correctly." + ) # l_signal = measurements_by_config['offline'][num_measurement]['uW'] # l_bkpts = [s[1] for s in raw_states] # fig, ax = rpt.display(np.array(l_signal), l_bkpts) @@ -711,65 +780,88 @@ if __name__ == '__main__': # states_consumption_list[i] = x / num_used_measurements if num_used_measurements != len(raw_states_list): if num_used_measurements / len(raw_states_list) <= 0.5: - print_warning("Only used " + str(num_used_measurements) + "/" - + str(len(raw_states_list)) - + " Measurements for refinement. " - + "Others did not recognize number of states correctly." - + "\nYou should verify the integrity of the measurements.") + print_warning( + "Only used " + + str(num_used_measurements) + + "/" + + str(len(raw_states_list)) + + " Measurements for refinement. " + + "Others did not recognize number of states correctly." + + "\nYou should verify the integrity of the measurements." + ) else: - print_info("Used " + str(num_used_measurements) + "/" - + str(len(raw_states_list)) + " Measurements for refinement." - + " Others did not recognize number of states correctly.") + print_info( + "Used " + + str(num_used_measurements) + + "/" + + str(len(raw_states_list)) + + " Measurements for refinement." + + " Others did not recognize number of states correctly." + ) num_used_measurements = i else: print_info("Used all available measurements.") state_durations_by_config.append((num_config, states_duration_list)) - state_consumptions_by_config.append((num_config, states_consumption_list)) + state_consumptions_by_config.append( + (num_config, states_consumption_list) + ) # combine all state durations and consumptions to parametrized model if len(state_durations_by_config) == 0: - print("No refinement necessary for this state. The macromodel is usable.") + print( + "No refinement necessary for this state. The macromodel is usable." + ) sys.exit(1) - if len(state_durations_by_config) / len(configurations) > 1 / 2 \ - and len(state_durations_by_config) != len(configurations): + if len(state_durations_by_config) / len(configurations) > 1 / 2 and len( + state_durations_by_config + ) != len(configurations): print_warning( "Some measurements(>50%) need to be refined, however that is not true for" " all measurements. This hints a correlation between the structure of" " the underlying automaton and parameters. Only the ones which need to" " be refined will be refined. THE RESULT WILL NOT ACCURATELY DEPICT " - " THE REAL WORLD.") + " THE REAL WORLD." + ) not_accurate = True if len(state_durations_by_config) / len(configurations) < 1 / 2: print_warning( "Some measurements(<50%) need to be refined, however that is not true for" " all measurements. This hints a correlation between the structure of" " the underlying automaton and parameters. Or a poor quality of measurements." - " No Refinement will be done.") + " No Refinement will be done." + ) sys.exit(-1) # this is only necessary because at this state only linear automatons can be modeled. num_states_array = [int()] * len(state_consumptions_by_config) - for i, (_, states_consumption_list) in enumerate(state_consumptions_by_config): + for i, (_, states_consumption_list) in enumerate( + state_consumptions_by_config + ): num_states_array[i] = len(states_consumption_list) counts = np.bincount(num_states_array) num_raw_states = np.argmax(counts) usable_configs = len(state_consumptions_by_config) # param_list identical for each raw_state param_list = [] - param_names = configurations[0]['offline_aggregates']['paramkeys'][0] + param_names = configurations[0]["offline_aggregates"]["paramkeys"][0] print_info("param_names: " + str(param_names)) for num_config, states_consumption_list in state_consumptions_by_config: if len(states_consumption_list) != num_raw_states: print_warning( - "Config No." + str(num_config) + " not usable yet due to different " + "Config No." + + str(num_config) + + " not usable yet due to different " + "number of states. This hints a correlation between parameters and " + "the structure of the resulting automaton. This will be possibly" + " supported in a future version of this tool. HOWEVER AT THE MOMENT" - " THIS WILL LEAD TO INACCURATE RESULTS!") + " THIS WILL LEAD TO INACCURATE RESULTS!" + ) not_accurate = True usable_configs = usable_configs - 1 else: - param_list.extend(configurations[num_config]['offline_aggregates']['param']) + param_list.extend( + configurations[num_config]["offline_aggregates"]["param"] + ) print_info("param_list: " + str(param_list)) if usable_configs == len(state_consumptions_by_config): @@ -782,7 +874,9 @@ if __name__ == '__main__': for i in range(num_raw_states): consumptions_for_state = [] durations_for_state = [] - for j, (_, states_consumption_list) in enumerate(state_consumptions_by_config): + for j, (_, states_consumption_list) in enumerate( + state_consumptions_by_config + ): if len(states_consumption_list) == num_raw_states: consumptions_for_state.extend(states_consumption_list[i]) durations_for_state.extend(state_durations_by_config[j][1][i]) @@ -790,8 +884,10 @@ if __name__ == '__main__': not_accurate = True usable_configs_2 = usable_configs_2 - 1 if usable_configs_2 != usable_configs: - print_error("an zwei unterschiedlichen Stellen wurden unterschiedlich viele " - "Messungen rausgeworfen. Bei Janis beschweren.") + print_error( + "an zwei unterschiedlichen Stellen wurden unterschiedlich viele " + "Messungen rausgeworfen. Bei Janis beschweren." + ) state_name = "state_" + str(i) state_dict = { "param": param_list, @@ -799,7 +895,7 @@ if __name__ == '__main__': "duration": durations_for_state, "attributes": ["power", "duration"], # Da kein "richtiger" Automat generiert wird, gibt es auch keine Transitionen - "isa": "state" + "isa": "state", } by_name[state_name] = state_dict by_param = by_name_to_by_param(by_name) @@ -842,12 +938,22 @@ if __name__ == '__main__': paramfit.enqueue(state_name, "power", num_param, param_name) if stats.depends_on_param(state_name, "duration", param_name): paramfit.enqueue(state_name, "duration", num_param, param_name) - print_info("State " + state_name + "s power depends on param " + param_name + ":" + - str(stats.depends_on_param(state_name, "power", param_name)) - ) - print_info("State " + state_name + "s duration depends on param " + param_name + ":" - + str(stats.depends_on_param(state_name, "duration", param_name)) - ) + print_info( + "State " + + state_name + + "s power depends on param " + + param_name + + ":" + + str(stats.depends_on_param(state_name, "power", param_name)) + ) + print_info( + "State " + + state_name + + "s duration depends on param " + + param_name + + ":" + + str(stats.depends_on_param(state_name, "duration", param_name)) + ) paramfit.fit() fit_res_dur_dict = {} fit_res_pow_dict = {} @@ -856,13 +962,19 @@ if __name__ == '__main__': fit_power = paramfit.get_result(state_name, "power") fit_duration = paramfit.get_result(state_name, "duration") combined_fit_power = analytic.function_powerset(fit_power, param_names, 0) - combined_fit_duration = analytic.function_powerset(fit_duration, param_names, 0) + combined_fit_duration = analytic.function_powerset( + fit_duration, param_names, 0 + ) combined_fit_power.fit(by_param, state_name, "power") if not combined_fit_power.fit_success: - print_warning("Fitting(power) for state " + state_name + " was not succesful!") + print_warning( + "Fitting(power) for state " + state_name + " was not succesful!" + ) combined_fit_duration.fit(by_param, state_name, "duration") if not combined_fit_duration.fit_success: - print_warning("Fitting(duration) for state " + state_name + " was not succesful!") + print_warning( + "Fitting(duration) for state " + state_name + " was not succesful!" + ) fit_res_pow_dict[state_name] = combined_fit_power fit_res_dur_dict[state_name] = combined_fit_duration # only raw_states with the same number of function parameters can be similar @@ -876,8 +988,7 @@ if __name__ == '__main__': for num_arg, arg in enumerate(model_args): replace_string = "regression_arg(" + str(num_arg) + ")" model_function = model_function.replace(replace_string, str(arg)) - print_info("Power-Function for state " + state_name + ": " - + model_function) + print_info("Power-Function for state " + state_name + ": " + model_function) for state_name in by_name.keys(): model_function = str(fit_res_dur_dict[state_name].model_function) model_args = fit_res_dur_dict[state_name].model_args @@ -885,8 +996,9 @@ if __name__ == '__main__': for num_arg, arg in enumerate(model_args): replace_string = "regression_arg(" + str(num_arg) + ")" model_function = model_function.replace(replace_string, str(arg)) - print_info("Duration-Function for state " + state_name + ": " - + model_function) + print_info( + "Duration-Function for state " + state_name + ": " + model_function + ) # sort states in buckets for clustering similar_raw_state_buckets = {} for state_name in by_name.keys(): @@ -900,15 +1012,21 @@ if __name__ == '__main__': # cluster for each Key-Tuple using the function parameters distinct_states = [] for key_tuple in similar_raw_state_buckets.keys(): - print_info("Key-Tuple " + str(key_tuple) + ": " - + str(similar_raw_state_buckets[key_tuple])) + print_info( + "Key-Tuple " + + str(key_tuple) + + ": " + + str(similar_raw_state_buckets[key_tuple]) + ) similar_states = similar_raw_state_buckets[key_tuple] if len(similar_states) > 1: # only necessary to cluster if more than one raw_state has the same function # configuration # functions are identical -> num_params and used params are identical - num_params = num_param_dur_dict[similar_states[0]] + num_param_pow_dict[ - similar_states[0]] + num_params = ( + num_param_dur_dict[similar_states[0]] + + num_param_pow_dict[similar_states[0]] + ) values_to_cluster = np.zeros((len(similar_states), num_params)) for num_state, state_name in enumerate(similar_states): dur_params = fit_res_dur_dict[state_name].model_args @@ -921,11 +1039,14 @@ if __name__ == '__main__': values_to_cluster[num_state][j] = param j = j + 1 normed_vals_to_cluster = norm_values_to_cluster(values_to_cluster) - cluster = AgglomerativeClustering(n_clusters=None, compute_full_tree=True, - affinity='euclidean', - linkage='ward', - # TODO: Magic Number. Beim Evaluieren finetunen - distance_threshold=1) + cluster = AgglomerativeClustering( + n_clusters=None, + compute_full_tree=True, + affinity="euclidean", + linkage="ward", + # TODO: Magic Number. Beim Evaluieren finetunen + distance_threshold=1, + ) cluster.fit_predict(values_to_cluster) cluster_labels = cluster.labels_ print_info("Cluster labels:\n" + str(cluster_labels)) @@ -952,8 +1073,11 @@ if __name__ == '__main__': state_name = "state_" + str(i) state_num = get_state_num(state_name, distinct_states) if state_num == -1: - print_error("Critical Error when creating the resulting sequence. raw_state state_" - + str(i) + " could not be mapped to a state.") + print_error( + "Critical Error when creating the resulting sequence. raw_state state_" + + str(i) + + " could not be mapped to a state." + ) sys.exit(-1) resulting_sequence[i] = state_num print("Resulting sequence is: " + str(resulting_sequence)) @@ -981,11 +1105,13 @@ if __name__ == '__main__': "duration": durations_for_state, "attributes": ["power", "duration"], # Da kein richtiger Automat generiert wird, gibt es auch keine Transitionen - "isa": "state" + "isa": "state", } new_by_name[state_name] = new_state_dict new_by_param = by_name_to_by_param(new_by_name) - new_stats = parameters.ParamStats(new_by_name, new_by_param, param_names, dict()) + new_stats = parameters.ParamStats( + new_by_name, new_by_param, param_names, dict() + ) new_paramfit = ParallelParamFit(new_by_param) for state_name in new_by_name.keys(): for num_param, param_name in enumerate(param_names): @@ -993,12 +1119,24 @@ if __name__ == '__main__': new_paramfit.enqueue(state_name, "power", num_param, param_name) if new_stats.depends_on_param(state_name, "duration", param_name): new_paramfit.enqueue(state_name, "duration", num_param, param_name) - print_info("State " + state_name + "s power depends on param " + param_name + ":" + - str(new_stats.depends_on_param(state_name, "power", param_name)) - ) - print_info("State " + state_name + "s duration depends on param " + param_name + ":" - + str(new_stats.depends_on_param(state_name, "duration", param_name)) - ) + print_info( + "State " + + state_name + + "s power depends on param " + + param_name + + ":" + + str(new_stats.depends_on_param(state_name, "power", param_name)) + ) + print_info( + "State " + + state_name + + "s duration depends on param " + + param_name + + ":" + + str( + new_stats.depends_on_param(state_name, "duration", param_name) + ) + ) new_paramfit.fit() new_fit_res_dur_dict = {} new_fit_res_pow_dict = {} @@ -1006,13 +1144,19 @@ if __name__ == '__main__': fit_power = new_paramfit.get_result(state_name, "power") fit_duration = new_paramfit.get_result(state_name, "duration") combined_fit_power = analytic.function_powerset(fit_power, param_names, 0) - combined_fit_duration = analytic.function_powerset(fit_duration, param_names, 0) + combined_fit_duration = analytic.function_powerset( + fit_duration, param_names, 0 + ) combined_fit_power.fit(new_by_param, state_name, "power") if not combined_fit_power.fit_success: - print_warning("Fitting(power) for state " + state_name + " was not succesful!") + print_warning( + "Fitting(power) for state " + state_name + " was not succesful!" + ) combined_fit_duration.fit(new_by_param, state_name, "duration") if not combined_fit_duration.fit_success: - print_warning("Fitting(duration) for state " + state_name + " was not succesful!") + print_warning( + "Fitting(duration) for state " + state_name + " was not succesful!" + ) new_fit_res_pow_dict[state_name] = combined_fit_power new_fit_res_dur_dict[state_name] = combined_fit_duration # output results @@ -1026,10 +1170,14 @@ if __name__ == '__main__': for num_arg, arg in enumerate(model_args): replace_string = "regression_arg(" + str(num_arg) + ")" model_function = model_function.replace(replace_string, str(arg)) - print("Power-Function for state " + state_name + ": " - + model_function) - f.write("Power-Function for state " + state_name + ": " - + model_function + "\n") + print("Power-Function for state " + state_name + ": " + model_function) + f.write( + "Power-Function for state " + + state_name + + ": " + + model_function + + "\n" + ) f.write("\n\n") for state_name in new_by_name.keys(): model_function = str(new_fit_res_dur_dict[state_name].model_function) @@ -1037,16 +1185,25 @@ if __name__ == '__main__': for num_arg, arg in enumerate(model_args): replace_string = "regression_arg(" + str(num_arg) + ")" model_function = model_function.replace(replace_string, str(arg)) - print("Duration-Function for state " + state_name + ": " - + model_function) - f.write("Duration-Function for state " + state_name + ": " - + model_function + "\n") + print( + "Duration-Function for state " + state_name + ": " + model_function + ) + f.write( + "Duration-Function for state " + + state_name + + ": " + + model_function + + "\n" + ) if not_accurate: print_warning( "THIS RESULT IS NOT ACCURATE. SEE WARNINGLOG TO GET A BETTER UNDERSTANDING" - " WHY.") - f.write("THIS RESULT IS NOT ACCURATE. SEE WARNINGLOG TO GET A BETTER UNDERSTANDING" - " WHY.") + " WHY." + ) + f.write( + "THIS RESULT IS NOT ACCURATE. SEE WARNINGLOG TO GET A BETTER UNDERSTANDING" + " WHY." + ) # Removed clustering at this point, since it provided too much difficulties # at the current state. Clustering is still used, but at another point of execution. @@ -1227,16 +1384,18 @@ if __name__ == '__main__': # open with dfatool raw_data_args = list() raw_data_args.append(opt_filename) - raw_data = RawData( - raw_data_args, with_traces=True + raw_data = RawData(raw_data_args, with_traces=True) + print_info( + "Preprocessing file. Depending on its size, this could take a while." ) - print_info("Preprocessing file. Depending on its size, this could take a while.") preprocessed_data = raw_data.get_preprocessed_data() print_info("File fully preprocessed") # TODO: Mal schauen, wie ich das mache. Erstmal nur mit json. Ist erstmal raus. Wird nicht # umgesetzt. - print_error("Not implemented yet. Please generate .json files first with dfatool and use" - " those.") + print_error( + "Not implemented yet. Please generate .json files first with dfatool and use" + " those." + ) else: print_error("Unknown dataformat") - sys.exit(-1)
\ No newline at end of file + sys.exit(-1) diff --git a/bin/plot_generator.py b/bin/plot_generator.py index 458271d..69df7d2 100644 --- a/bin/plot_generator.py +++ b/bin/plot_generator.py @@ -7,14 +7,11 @@ import pprint import json import matplotlib.pyplot as plt -if __name__ == '__main__': +if __name__ == "__main__": # OPTION RECOGNITION opt = dict() - optspec = ( - "bench_filename= " - "result_filename= " - ) + optspec = "bench_filename= " "result_filename= " opt_bench_filename = None opt_result_filename = None try: @@ -28,19 +25,19 @@ if __name__ == '__main__': sys.exit(-1) if "bench_filename" in opt: - opt_bench_filename = opt['bench_filename'] + opt_bench_filename = opt["bench_filename"] else: sys.exit(-1) if "result_filename" in opt: - opt_result_filename = opt['result_filename'] + opt_result_filename = opt["result_filename"] else: print("wth") sys.exit(-1) - with open(opt_bench_filename, 'r') as f: + with open(opt_bench_filename, "r") as f: configurations = json.load(f) - with open(opt_result_filename, 'r') as f: + with open(opt_result_filename, "r") as f: sequence_line = f.readline() begin_sequence = sequence_line.rfind("Resulting Sequence: ") + 20 @@ -58,7 +55,7 @@ if __name__ == '__main__': state_name_pos = function_line.find("Power-Function for state ") + 25 state_name_end = function_line.find(":") state_name = function_line[state_name_pos:state_name_end] - function_string = function_line[state_name_end+1:-1] + function_string = function_line[state_name_end + 1 : -1] pow_function_dict[state_name] = function_string function_line = f.readline() new_line = "\n" @@ -66,25 +63,36 @@ if __name__ == '__main__': new_line = f.readline() function_line = new_line dur_function_dict = dict() - while function_line != "\n" and function_line != "" and "THIS RESULT IS NOT ACCURATE." not in function_line: + while ( + function_line != "\n" + and function_line != "" + and "THIS RESULT IS NOT ACCURATE." not in function_line + ): state_name_pos = function_line.find("Duration-Function for state ") + 28 state_name_end = function_line.find(":") state_name = function_line[state_name_pos:state_name_end] - function_string = function_line[state_name_end+1:-1] + function_string = function_line[state_name_end + 1 : -1] dur_function_dict[state_name] = function_string function_line = f.readline() - param_names = configurations[0]['offline_aggregates']['paramkeys'][0] + param_names = configurations[0]["offline_aggregates"]["paramkeys"][0] for num_fig in range(0, min(4, len(configurations))): rand_config_no = np.random.randint(0, len(configurations), 1)[0] rand_conf = configurations[rand_config_no] - rand_signal = np.array(rand_conf['offline'][0]['uW']) - rand_param = rand_conf['offline_aggregates']['param'][0] + rand_signal = np.array(rand_conf["offline"][0]["uW"]) + rand_param = rand_conf["offline_aggregates"]["param"][0] rand_max_pow = max(rand_signal) # pprint.pprint(rand_param) pretty_rand_param = pprint.pformat(rand_param) - print(str(param_names) + "(" + str(rand_config_no) + ")" + "\n" + pretty_rand_param) + print( + str(param_names) + + "(" + + str(rand_config_no) + + ")" + + "\n" + + pretty_rand_param + ) time = 0 next_time = 0 rand_stepper = 0 @@ -97,8 +105,12 @@ if __name__ == '__main__': curr_dur_func = dur_function_dict[curr_state_name] for num_param, name in enumerate(param_names): replace_string = "parameter(" + name + ")" - curr_pow_func = curr_pow_func.replace(replace_string, str(rand_param[num_param])) - curr_dur_func = curr_dur_func.replace(replace_string, str(rand_param[num_param])) + curr_pow_func = curr_pow_func.replace( + replace_string, str(rand_param[num_param]) + ) + curr_dur_func = curr_dur_func.replace( + replace_string, str(rand_param[num_param]) + ) pow = eval(curr_pow_func) dur = eval(curr_dur_func) next_time = time + dur @@ -109,15 +121,15 @@ if __name__ == '__main__': rand_stepper = rand_stepper + 1 time = next_time - with open("res_conf_" + str(num_fig) + "_signal.txt", 'w') as f: + with open("res_conf_" + str(num_fig) + "_signal.txt", "w") as f: f.write("x,y\n") for x, y in enumerate(rand_signal): f.write(str(x) + "," + str(y) + "\n") - with open("res_conf_" + str(num_fig) + "_fit.txt", 'w') as f: + with open("res_conf_" + str(num_fig) + "_fit.txt", "w") as f: f.write("x,y\n") for x, y in resulting_coords: f.write(str(x) + "," + str(y) + "\n") plt.plot(rand_signal) plt.plot([x for x, y in resulting_coords], [y for x, y in resulting_coords]) - plt.savefig("res_conf_" + str(num_fig) + "_pic.pdf", format='pdf', dpi=300) + plt.savefig("res_conf_" + str(num_fig) + "_pic.pdf", format="pdf", dpi=300) plt.clf() |