summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Makefile9
-rw-r--r--include/driver/ssd1306.h78
-rw-r--r--src/driver/Kconfig14
-rw-r--r--src/driver/ssd1306.cc52
4 files changed, 153 insertions, 0 deletions
diff --git a/Makefile b/Makefile
index 3a00779..abd4dca 100644
--- a/Makefile
+++ b/Makefile
@@ -108,6 +108,10 @@ ifneq ($(findstring sharp96,${drivers}), )
CONFIG_driver_sharp96 = y
endif
+ifneq ($(findstring ssd1306,${drivers}), )
+ CONFIG_driver_ssd1306 = y
+endif
+
ifneq ($(findstring tsl2591,${drivers}), )
CONFIG_driver_tsl2591 = y
endif
@@ -251,6 +255,11 @@ ifdef CONFIG_driver_sharp96
COMMON_FLAGS += -DSHARP96_CS_PIN=GPIO::${sharp96_cs_pin}
endif
+ifdef CONFIG_driver_ssd1306
+ CXX_TARGETS += src/driver/ssd1306.cc
+ COMMON_FLAGS += -DDRIVER_SSD1306 -DSSD1306_WIDTH=${CONFIG_driver_ssd1306_width} -DSSD1306_HEIGHT=${CONFIG_driver_ssd1306_height}
+endif
+
ifdef CONFIG_driver_resistive_load
CXX_TARGETS += src/driver/resistive_load.cc
resistor1_pin ?= p3_0
diff --git a/include/driver/ssd1306.h b/include/driver/ssd1306.h
new file mode 100644
index 0000000..4a2cf01
--- /dev/null
+++ b/include/driver/ssd1306.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2021 Daniel Friesel
+ *
+ * SPDX-License-Identifier: BSD-2-Clause
+ */
+#ifndef SSD1306_H
+#define SSD1306_H
+
+#define SSD1306_SET_CONTRAST 0x81
+#define SSD1306_SET_ENTIRE_ON 0xa4
+#define SSD1306_SET_NORM_INV 0xa6
+#define SSD1306_SET_DISP 0xae
+#define SSD1306_SET_MEM_ADDR 0x20
+#define SSD1306_SET_COL_ADDR 0x21
+#define SSD1306_SET_PAGE_ADDR 0x22
+#define SSD1306_SET_DISP_START_LINE 0x40
+#define SSD1306_SET_SEG_REMAP 0xa0
+#define SSD1306_SET_MUX_RATIO 0xa8
+#define SSD1306_SET_COM_OUT_DIR 0xc0
+#define SSD1306_SET_DISP_OFFSET 0xd3
+#define SSD1306_SET_COM_PIN_CFG 0xda
+#define SSD1306_SET_DISP_CLK_DIV 0xd5
+#define SSD1306_SET_PRECHARGE 0xd9
+#define SSD1306_SET_VCOM_DESEL 0xdb
+#define SSD1306_SET_CHARGE_PUMP 0x8d
+
+#include <stdint.h>
+#include <stddef.h>
+
+class SSD1306 {
+ private:
+ const uint8_t width = SSD1306_WIDTH;
+ const uint8_t height = SSD1306_HEIGHT;
+ SSD1306(const SSD1306 &copy);
+
+ unsigned char const address = 0x3c;
+
+ unsigned char txbuf[130];
+ unsigned char rxbuf[2];
+
+ const unsigned char init1[6] = {
+ SSD1306_SET_DISP | 0x00,
+ SSD1306_SET_MEM_ADDR, 0x00,
+ SSD1306_SET_DISP_START_LINE | 0x00,
+ SSD1306_SET_SEG_REMAP | 0x01,
+ SSD1306_SET_MUX_RATIO
+ };
+ // height
+ const unsigned char init2[4] = {
+ SSD1306_SET_COM_OUT_DIR | 0x08,
+ SSD1306_SET_DISP_OFFSET, 0x00,
+ SSD1306_SET_COM_PIN_CFG
+ };
+ // height == 32? 0x02 : 0x12
+ const unsigned char init3[13] = {
+ SSD1306_SET_DISP_CLK_DIV, 0x80,
+ SSD1306_SET_PRECHARGE, 0xf1,
+ SSD1306_SET_VCOM_DESEL, 0x30,
+ SSD1306_SET_CONTRAST, 0xff,
+ SSD1306_SET_ENTIRE_ON,
+ SSD1306_SET_NORM_INV,
+ SSD1306_SET_CHARGE_PUMP, 0x14,
+ SSD1306_SET_DISP | 0x01
+ };
+
+ void writeCommand(uint8_t command);
+ void writeData(unsigned char* data);
+
+ public:
+ SSD1306() {}
+
+ void init();
+ void showImage(unsigned char* data, uint16_t length);
+};
+
+extern SSD1306 ssd1306;
+
+#endif
diff --git a/src/driver/Kconfig b/src/driver/Kconfig
index 0b1b98b..3c96d9e 100644
--- a/src/driver/Kconfig
+++ b/src/driver/Kconfig
@@ -80,6 +80,20 @@ config driver_sharp96
bool "sharp LS013B4DN 96x96px Transflective LC Display"
depends on ( arch_msp430fr5969lp || arch_msp430fr5994lp ) && meta_driver_spi
+config driver_ssd1306
+bool "SSD1306 I2C OLED display"
+depends on meta_driver_i2c
+
+config driver_ssd1306_width
+int "Display width"
+default 128
+depends on driver_ssd1306
+
+config driver_ssd1306_height
+int "Display height"
+default 64
+depends on driver_ssd1306
+
config driver_softi2c
bool "Software I2C"
#depends on !driver_i2c
diff --git a/src/driver/ssd1306.cc b/src/driver/ssd1306.cc
new file mode 100644
index 0000000..69bd28c
--- /dev/null
+++ b/src/driver/ssd1306.cc
@@ -0,0 +1,52 @@
+/*
+ * Copyright 2021 Daniel Friesel
+ *
+ * SPDX-License-Identifier: BSD-2-Clause
+ */
+#include "driver/ssd1306.h"
+#include "driver/i2c.h"
+#include "driver/soft_i2c.h"
+
+void SSD1306::writeCommand(uint8_t command)
+{
+ txbuf[0] = 0x80;
+ txbuf[1] = command;
+ i2c.xmit(address, 2, txbuf, 0, rxbuf);
+}
+
+void SSD1306::init()
+{
+ unsigned char i;
+ for (i = 0; i < sizeof(init1); i++) {
+ writeCommand(init1[i]);
+ }
+ writeCommand(height - 1);
+ for (i = 0; i < sizeof(init2); i++) {
+ writeCommand(init2[i]);
+ }
+ writeCommand(height == 32 ? 0x02 : 0x12);
+ for (i = 0; i < sizeof(init3); i++) {
+ writeCommand(init3[i]);
+ }
+}
+
+void SSD1306::showImage(unsigned char* data, uint16_t length)
+{
+ uint8_t i;
+ uint8_t j;
+ txbuf[0] = 0x40;
+ for (i = 0; i < length / 128; i++) {
+ for (j = 0; j < 128; j++) {
+ txbuf[j+1] = data[(uint16_t)i*128 + j];
+ }
+ i2c.xmit(address, 129, txbuf, 0, rxbuf);
+ }
+ if (length % 128) {
+ for (j = 0; j < length % 128; j++) {
+ txbuf[j+1] = data[(uint16_t)i*128 + j];
+ }
+ i2c.xmit(address, (length % 128) + 1, txbuf, 0, rxbuf);
+ }
+}
+
+SSD1306 ssd1306;