summaryrefslogtreecommitdiff
path: root/include/arch/msp430fr5994lp/driver
diff options
context:
space:
mode:
Diffstat (limited to 'include/arch/msp430fr5994lp/driver')
-rw-r--r--include/arch/msp430fr5994lp/driver/gpio.h33
1 files changed, 24 insertions, 9 deletions
diff --git a/include/arch/msp430fr5994lp/driver/gpio.h b/include/arch/msp430fr5994lp/driver/gpio.h
index aa32e7e..d42dace 100644
--- a/include/arch/msp430fr5994lp/driver/gpio.h
+++ b/include/arch/msp430fr5994lp/driver/gpio.h
@@ -23,7 +23,22 @@ class GPIO {
PIN_INVALID
};
+ /*
+ * Set all non-standard GPIOs to input with pull-down.
+ * This avoids excessive current draw due to floating inputs.
+ * Note that we do not set GPIOs to output low, as that might
+ * short-circuit other peripherals.
+ */
inline void setup() {
+ P1DIR = BIT0 | BIT1; // red LED, green LED
+ P2DIR = 0;
+ P3DIR = 0;
+ P4DIR = 0;
+ P5DIR = 0;
+ P6DIR = 0;
+ P7DIR = 0;
+ P8DIR = 0;
+ PJDIR = 0;
P1OUT = 0;
P2OUT = 0;
P3OUT = 0;
@@ -33,15 +48,15 @@ class GPIO {
P7OUT = 0;
P8OUT = 0;
PJOUT = 0;
- P1DIR = BIT0 | BIT1 | 0xff; // red LED, green LED
- P2DIR = 0xff ^ (BIT0 | BIT1); // UART
- P3DIR = 0xff;
- P4DIR = 0xff;
- P5DIR = 0xff;
- P6DIR = 0xff;
- P7DIR = 0xff;
- P8DIR = 0x0f;
- PJDIR = BIT6 | BIT7; // HFXT (not populated)
+ P1REN = 0xff & ~(BIT0 | BIT1); // red LED, green LED
+ P2REN = 0xff & ~(BIT0 | BIT1); // UART
+ P3REN = 0xff;
+ P4REN = 0xff;
+ P5REN = 0xff;
+ P6REN = 0xff;
+ P7REN = 0xff;
+ P8REN = 0xff;
+ PJREN = BIT6 | BIT7; // HFXT (not populated)
}
inline void led_on(unsigned char id) {
if (id == 0) {