1 files changed, 0 insertions, 88 deletions
diff --git a/src/app/ledblink/main.cc b/src/app/ledblink/main.cc
index 8b0fe87..8d2e9d4 100644
--- a/src/app/ledblink/main.cc
+++ b/src/app/ledblink/main.cc
@@ -7,89 +7,6 @@
 #error makeflag timer_cycles=1 required
 #endif
 
-/*
-void check_command(unsigned char argc, char** argv)
-{
-	unsigned char i2c_rxbuf[16];
-	unsigned char i2c_txbuf[16];
-	float buf = 0;
-	int i;
-	if (!strcmp(argv[0], "i2c")) {
-		if (argc == 0) {
-			uart_puterr("Usage: i2c <on|off|detect|gettemp> [-u]\n");
-			return;
-		}
-		if (!strcmp(argv[1], "on")) {
-			if ((argc >= 2) && !strcmp(argv[2], "-u")) {
-				if (i2c_setup(1) < 0)
-					uart_puterr("Error initializing I²C: Line is busy\n");
-			} else {
-				if (i2c_setup(0) < 0)
-					uart_puterr("Error initializing I²C: Line is busy\n"
-							"Do you have hardware pullups on SDA/SCL?\n");
-			}
-		} else if (!strcmp(argv[1], "off")) {
-			uart_puterr("Error: not implemented yet\n");
-		} else if (!strcmp(argv[1], "detect")) {
-			i2c_scan();
-		} else if (!strcmp(argv[1], "tc74")) {
-			i2c_txbuf[0] = 0x00;
-			i2c_xmit(0x4d, 1, 1, i2c_txbuf, i2c_rxbuf);
-			uart_putint(i2c_rxbuf[0]);
-			uart_puts("°C\n");
-		} else if (!strcmp(argv[1], "lm75")) {
-			i2c_txbuf[0] = 0x00;
-			i2c_xmit(0x48, 1, 2, i2c_txbuf, i2c_rxbuf);
-			uart_putfloat(i2c_rxbuf[0] + (i2c_rxbuf[1] / 256.0));
-			uart_puts("°C\n");
-		}
-		else if (!strcmp(argv[1], "eepr")) {
-			i2c_rxbuf[0] = 0;
-			i2c_txbuf[0] = 0;
-			i2c_txbuf[1] = argv[2][0];
-			i2c_xmit(0x50, 2, 1, i2c_txbuf, i2c_rxbuf);
-			uart_putint(i2c_rxbuf[0]);
-			uart_puts("\n");
-		}
-		else if (!strcmp(argv[1], "eepw")) {
-			i2c_txbuf[0] = 0;
-			i2c_txbuf[1] = argv[2][0];
-			i2c_txbuf[2] = argv[3][0];
-			i2c_txbuf[3] = argv[3][1];
-			i2c_txbuf[4] = argv[3][2];
-			i2c_txbuf[5] = argv[3][3];
-			i2c_txbuf[6] = argv[3][4];
-			i2c_txbuf[7] = argv[3][5];
-			i2c_xmit(0x50, 8, 0, i2c_txbuf, i2c_rxbuf);
-		}
-	} else if (!strcmp(argv[0], "sensors")) {
-		for (i = 0; i < 32; i++) {
-			buf += adc_gettemp();
-			__delay_cycles(64000);
-		}
-		uart_puts("Temperature : ");
-		uart_putfloat(buf / 32);
-		uart_puts("°C avg / ");
-		uart_putfloat(adc_gettemp());
-		uart_puts("°C single\n    Voltage : ");
-		uart_putfloat(adc_getvcc());
-		uart_puts("V\n");
-	} else if (!strcmp(argv[0], "spi")) {
-		if (argc == 0) {
-			uart_puterr("Usage: spi <on|off|sharp>\n");
-			return;
-		}
-		if (!strcmp(argv[1], "on")) {
-			spi_setup();
-		}
-	} else if (!strcmp(argv[0], "help")) {
-		uart_puts("Supported commands: i2c sensors\n");
-	} else {
-		uart_puterr("Unknown command\n");
-	}
-}
-*/
-
 void loop(void)
 {
 	gpio.led_toggle(1);
@@ -114,10 +31,5 @@ int main(void)
 
 	arch.idle_loop();
 
-	//uart_setup();
-	//uart_puts("\n" COL_YELLOW "dOS" COL_GREEN " > " COL_RESET);
-
-	//arch_idle_loop();
-
 	return 0;
 }