diff options
Diffstat (limited to 'src/arch/stm32f446re-nucleo/Makefile.inc')
| -rw-r--r-- | src/arch/stm32f446re-nucleo/Makefile.inc | 116 |
1 files changed, 116 insertions, 0 deletions
diff --git a/src/arch/stm32f446re-nucleo/Makefile.inc b/src/arch/stm32f446re-nucleo/Makefile.inc new file mode 100644 index 0000000..54792d3 --- /dev/null +++ b/src/arch/stm32f446re-nucleo/Makefile.inc @@ -0,0 +1,116 @@ +# vim:ft=make + +SERIAL_PORT ?= ttyACM0 + +INCLUDES += -Iext/libopencm3/include + +COMMON_FLAGS += --static -nostartfiles -g3 -Os -fno-common +COMMON_FLAGS += -ffunction-sections -fdata-sections +COMMON_FLAGS += -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -DSTM32F4 + +CC = arm-none-eabi-gcc +CXX = arm-none-eabi-g++ +OBJCOPY = arm-none-eabi-objcopy +OBJDUMP = arm-none-eabi-objdump + +CXX_TARGETS += src/arch/stm32f446re-nucleo/arch.cc + +ifeq (${aspectc}, 1) + CXX = ag++ -r build/repo.acp -v 0 --c_compiler arm-none-eabi-g++ -p . --Xcompiler +endif + +ifneq ($(findstring adc,${arch_drivers}), ) + CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/adc.cc +endif + +CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/gpio.cc +CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/stdout.cc +#CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/uptime.cc + +ifneq ($(findstring stdin,${arch_drivers}), ) + CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/stdin.cc +endif + +ifneq ($(findstring softi2c,${drivers}), ) +else ifneq ($(findstring i2c,${arch_drivers}), ) + CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/i2c.cc + COMMON_FLAGS += -DDRIVER_I2C +endif + +ifneq ($(findstring spi_a1,${arch_drivers}), ) + CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/spi_a1.cc +endif + +ifneq ($(findstring spi_b,${arch_drivers}), ) + CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/spi_b.cc +endif + +ifneq ($(findstring timer,${arch_drivers}), ) + CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/timer.cc +endif + +ifneq ($(findstring counter,${arch_drivers}), ) + CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/counter.cc +endif + + +OBJECTS = ${CXX_TARGETS:.cc=.o} ${C_TARGETS:.c=.o} ${ASM_TARGETS:.S=.o} + +.cc.o: + ${QUIET}${CXX} ${INCLUDES} ${COMMON_FLAGS} ${CXXFLAGS} -c -o $@ ${@:.o=.cc} + +.c.o: + ${QUIET}${CC} ${INCLUDES} ${COMMON_FLAGS} ${CFLAGS} -c -o $@ ${@:.o=.c} + +.S.o: + ${QUIET}${CC} ${INCLUDES} ${COMMON_FLAGS} -c -o $@ ${@:.o=.S} + +.s.o: + ${QUIET}${CC} ${INCLUDES} ${COMMON_FLAGS} -c -o $@ ${@:.o=.S} + +# deliberately no ${MAKE} here -- multipass relies on make -B, but we don't +# want to re-make libopencm3 all the time +ext/libopencm3/lib/libopencm3_stm32f4.a: ext/libopencm3/Makefile + git submodule update --init + ${MAKE} -C ext/libopencm3 + +build/system.elf: ${OBJECTS} ext/libopencm3/lib/libopencm3_stm32f4.a + ${QUIET}mkdir -p build + ${QUIET}${CXX} ${INCLUDES} ${COMMON_FLAGS} ${CXXFLAGS} \ + -Lext/libopencm3/lib -Wl,--gc-sections \ + -Wl,--start-group -lc -lgcc -lnosys -Wl,--end-group \ + -T src/arch/stm32f446re-nucleo/stm32f446.ld \ + ${OBJECTS} -lopencm3_stm32f4 \ + -o $@ + +program: build/system.elf + openocd -c 'source [find interface/stlink-v2-1.cfg]' \ + -c 'transport select hla_swd' -c 'source [find target/stm32f4x.cfg]' \ + -c 'reset_config srst_only' -c '$$_TARGETNAME configure -rtos auto' \ + -c 'reset_config connect_assert_srst' -c init -c targets \ + -c 'reset halt' -c 'flash write_image erase "build/system.elf" 0' \ + 'verify_image "build/system.elf" 0' -c 'reset run' -c 'shutdown' + +arch_clean: + ${QUIET}rm -f ${OBJECTS} + +monitor: + ${QUIET}screen /dev/${SERIAL_PORT} 115200 + +arch_help: + @echo "stm32f446re-nucleo specific flags:" + @echo " DEBUG_PORT = ${DEBUG_PORT}" + @echo " SERIAL_PORT = ${SERIAL_PORT}" + @echo " cpu_freq = ${cpu_freq} (desired CPU frequency in Hz)" + @echo " supported frequencies: 1 / 4 / 8 / 16 MHz" + @echo " MSP430_FLASHER_DIR = /home/derf/var/projects/msp430/MSP430Flasher_1.3.7" + @echo " (required for flashing, must contain libmsp430.so and MSP430Flasher)" + +arch_info: + @echo "CPU Freq: ${cpu_freq} Hz" + @echo "Timer Freq: ${timer_freq} Hz -> $(shell src/arch/stm32f446re-nucleo/model.py f_timer "${cpu_freq}" "${timer_freq}")" + @echo "I2C Freq: ${i2c_freq} Hz" + @echo "Counter Overflow: 65536/255" + @echo "Monitor: /dev/${SERIAL_PORT} 115200" + +.PHONY: arch_clean arch_help arch_info monitor program |