summaryrefslogtreecommitdiff
path: root/src
diff options
context:
space:
mode:
Diffstat (limited to 'src')
-rw-r--r--src/app/i2cdetect/main.cc28
-rw-r--r--src/driver/bme280.cc68
2 files changed, 62 insertions, 34 deletions
diff --git a/src/app/i2cdetect/main.cc b/src/app/i2cdetect/main.cc
index e235369..faa2725 100644
--- a/src/app/i2cdetect/main.cc
+++ b/src/app/i2cdetect/main.cc
@@ -12,6 +12,10 @@
#ifdef DRIVER_AM2320
#include "driver/am2320.h"
#endif
+#ifdef DRIVER_BME280
+#include "driver/bme280.h"
+#include "driver/bme680_util.h"
+#endif
#ifdef DRIVER_BME680
#include "driver/bme680.h"
#include "driver/bme680_util.h"
@@ -52,6 +56,30 @@ void loop(void)
kout << "AM2320 error " << dec << am2320.getStatus() << endl;
}
#endif
+#ifdef DRIVER_BME280
+ bme280.intf = BME280_I2C_INTF;
+ bme280.read = bme680_i2c_read;
+ bme280.write = bme680_i2c_write;
+ bme280.delay_ms = bme680_delay_ms;
+
+ int8_t rslt = BME280_OK;
+ struct bme280_data comp_data;
+ rslt = bme280.init();
+ kout << "BME280 init " << rslt << endl;
+ bme280.settings.osr_p = BME280_OVERSAMPLING_16X;
+ bme280.settings.osr_t = BME280_OVERSAMPLING_16X;
+ bme280.settings.osr_h = BME280_OVERSAMPLING_16X;
+ bme280.settings.filter = BME280_FILTER_COEFF_OFF;
+ bme280.settings.standby_time = BME280_STANDBY_TIME_500_MS;
+ bme280.setSensorSettings(BME280_OSR_PRESS_SEL | BME280_OSR_TEMP_SEL | BME280_OSR_HUM_SEL | BME280_FILTER_SEL | BME280_STANDBY_SEL);
+ bme280.setSensorMode(BME280_NORMAL_MODE);
+ arch.delay_ms(100);
+ rslt = bme280.getSensorData(BME280_ALL, &comp_data);
+ kout << "BME280 read " << rslt << endl;
+ kout << "BME280 temperature " << (float)comp_data.temperature / 100 << " degC" << endl;
+ kout << "BME280 humidity " << (float)comp_data.humidity / 1024 << " %" << endl;
+ kout << "BME280 pressure " << (float)comp_data.pressure / 100 << " Pa" << endl;
+#endif
#ifdef DRIVER_BME680
bme680.intf = BME680_I2C_INTF;
bme680.read = bme680_i2c_read;
diff --git a/src/driver/bme280.cc b/src/driver/bme280.cc
index 69ef445..bf2cab5 100644
--- a/src/driver/bme280.cc
+++ b/src/driver/bme280.cc
@@ -102,13 +102,13 @@ int8_t BME280::init()
while (try_count)
{
/* Read the chip-id of bme280 sensor */
- rslt = get_regs(BME280_CHIP_ID_ADDR, &chip_id, 1);
+ rslt = getRegs(BME280_CHIP_ID_ADDR, &chip_id, 1);
/* Check for chip id validity */
if ((rslt == BME280_OK) && (chip_id == BME280_CHIP_ID))
{
/* Reset the sensor */
- rslt = soft_reset();
+ rslt = softReset();
if (rslt == BME280_OK)
{
/* Read the calibration data */
@@ -135,7 +135,7 @@ int8_t BME280::init()
/*!
* @brief This API reads the data from the given register address of the sensor.
*/
-int8_t BME280::get_regs(uint8_t reg_addr, uint8_t *reg_data, uint16_t len)
+int8_t BME280::getRegs(uint8_t reg_addr, uint8_t *reg_data, uint16_t len)
{
int8_t rslt;
@@ -168,7 +168,7 @@ int8_t BME280::get_regs(uint8_t reg_addr, uint8_t *reg_data, uint16_t len)
* @brief This API writes the given data to the register address
* of the sensor.
*/
-int8_t BME280::set_regs(uint8_t *reg_addr, const uint8_t *reg_data, uint8_t len)
+int8_t BME280::setRegs(uint8_t *reg_addr, const uint8_t *reg_data, uint8_t len)
{
int8_t rslt;
uint8_t temp_buff[20]; /* Typically not to write more than 10 registers */
@@ -237,7 +237,7 @@ int8_t BME280::set_regs(uint8_t *reg_addr, const uint8_t *reg_data, uint8_t len)
* @brief This API sets the oversampling, filter and standby duration
* (normal mode) settings in the sensor.
*/
-int8_t BME280::set_sensor_settings(uint8_t desired_settings)
+int8_t BME280::setSensorSettings(uint8_t desired_settings)
{
int8_t rslt;
uint8_t sensor_mode;
@@ -248,7 +248,7 @@ int8_t BME280::set_sensor_settings(uint8_t desired_settings)
/* Proceed if null check is fine */
if (rslt == BME280_OK)
{
- rslt = get_sensor_mode(&sensor_mode);
+ rslt = getSensorMode(&sensor_mode);
if ((rslt == BME280_OK) && (sensor_mode != BME280_SLEEP_MODE))
{
rslt = put_device_to_sleep();
@@ -280,7 +280,7 @@ int8_t BME280::set_sensor_settings(uint8_t desired_settings)
* @brief This API gets the oversampling, filter and standby duration
* (normal mode) settings from the sensor.
*/
-int8_t BME280::get_sensor_settings()
+int8_t BME280::getSensorSettings()
{
int8_t rslt;
uint8_t reg_data[4];
@@ -291,7 +291,7 @@ int8_t BME280::get_sensor_settings()
/* Proceed if null check is fine */
if (rslt == BME280_OK)
{
- rslt = get_regs(BME280_CTRL_HUM_ADDR, reg_data, 4);
+ rslt = getRegs(BME280_CTRL_HUM_ADDR, reg_data, 4);
if (rslt == BME280_OK)
{
parse_device_settings(reg_data, &settings);
@@ -304,7 +304,7 @@ int8_t BME280::get_sensor_settings()
/*!
* @brief This API sets the power mode of the sensor.
*/
-int8_t BME280::set_sensor_mode(uint8_t sensor_mode)
+int8_t BME280::setSensorMode(uint8_t sensor_mode)
{
int8_t rslt;
uint8_t last_set_mode;
@@ -313,7 +313,7 @@ int8_t BME280::set_sensor_mode(uint8_t sensor_mode)
rslt = null_ptr_check();
if (rslt == BME280_OK)
{
- rslt = get_sensor_mode(&last_set_mode);
+ rslt = getSensorMode(&last_set_mode);
/* If the sensor is not in sleep mode put the device to sleep
* mode
@@ -336,7 +336,7 @@ int8_t BME280::set_sensor_mode(uint8_t sensor_mode)
/*!
* @brief This API gets the power mode of the sensor.
*/
-int8_t BME280::get_sensor_mode(uint8_t *sensor_mode)
+int8_t BME280::getSensorMode(uint8_t *sensor_mode)
{
int8_t rslt;
@@ -345,7 +345,7 @@ int8_t BME280::get_sensor_mode(uint8_t *sensor_mode)
if (rslt == BME280_OK)
{
/* Read the power mode register */
- rslt = get_regs(BME280_PWR_CTRL_ADDR, sensor_mode, 1);
+ rslt = getRegs(BME280_PWR_CTRL_ADDR, sensor_mode, 1);
/* Assign the power mode in the device structure */
*sensor_mode = BME280_GET_BITS_POS_0(*sensor_mode, BME280_SENSOR_MODE);
@@ -357,7 +357,7 @@ int8_t BME280::get_sensor_mode(uint8_t *sensor_mode)
/*!
* @brief This API performs the soft reset of the sensor.
*/
-int8_t BME280::soft_reset()
+int8_t BME280::softReset()
{
int8_t rslt;
uint8_t reg_addr = BME280_RESET_ADDR;
@@ -374,7 +374,7 @@ int8_t BME280::soft_reset()
if (rslt == BME280_OK)
{
/* Write the soft reset command in the sensor */
- rslt = set_regs(&reg_addr, &soft_rst_cmd, 1);
+ rslt = setRegs(&reg_addr, &soft_rst_cmd, 1);
if (rslt == BME280_OK)
{
@@ -383,7 +383,7 @@ int8_t BME280::soft_reset()
{
/* As per data sheet - Table 1, startup time is 2 ms. */
delay_ms(2);
- rslt = get_regs(BME280_STATUS_REG_ADDR, &status_reg, 1);
+ rslt = getRegs(BME280_STATUS_REG_ADDR, &status_reg, 1);
} while ((rslt == BME280_OK) && (try_run--) && (status_reg & BME280_STATUS_IM_UPDATE));
if (status_reg & BME280_STATUS_IM_UPDATE)
@@ -402,7 +402,7 @@ int8_t BME280::soft_reset()
* sensor, compensates the data and store it in the bme280_data structure
* instance passed by the user.
*/
-int8_t BME280::get_sensor_data(uint8_t sensor_comp, struct bme280_data *comp_data)
+int8_t BME280::getSensorData(uint8_t sensor_comp, struct bme280_data *comp_data)
{
int8_t rslt;
@@ -417,16 +417,16 @@ int8_t BME280::get_sensor_data(uint8_t sensor_comp, struct bme280_data *comp_dat
if ((rslt == BME280_OK) && (comp_data != NULL))
{
/* Read the pressure and temperature data from the sensor */
- rslt = get_regs(BME280_DATA_ADDR, reg_data, BME280_P_T_H_DATA_LEN);
+ rslt = getRegs(BME280_DATA_ADDR, reg_data, BME280_P_T_H_DATA_LEN);
if (rslt == BME280_OK)
{
/* Parse the read data from the sensor */
- parse_sensor_data(reg_data, &uncomp_data);
+ parseSensorData(reg_data, &uncomp_data);
/* Compensate the pressure and/or temperature and/or
* humidity data from the sensor
*/
- rslt = compensate_data(sensor_comp, &uncomp_data, comp_data, &calib_data);
+ rslt = compensateSensorData(sensor_comp, &uncomp_data, comp_data, &calib_data);
}
}
else
@@ -441,7 +441,7 @@ int8_t BME280::get_sensor_data(uint8_t sensor_comp, struct bme280_data *comp_dat
* @brief This API is used to parse the pressure, temperature and
* humidity data and store it in the bme280_uncomp_data structure instance.
*/
-void BME280::parse_sensor_data(const uint8_t *reg_data, struct bme280_uncomp_data *uncomp_data)
+void BME280::parseSensorData(const uint8_t *reg_data, struct bme280_uncomp_data *uncomp_data)
{
/* Variables to store the sensor data */
uint32_t data_xlsb;
@@ -471,7 +471,7 @@ void BME280::parse_sensor_data(const uint8_t *reg_data, struct bme280_uncomp_dat
* temperature and/or humidity data according to the component selected
* by the user.
*/
-int8_t BME280::compensate_data(uint8_t sensor_comp,
+int8_t BME280::compensateSensorData(uint8_t sensor_comp,
const struct bme280_uncomp_data *uncomp_data,
struct bme280_data *comp_data,
struct bme280_calib_data *calib_data)
@@ -544,7 +544,7 @@ int8_t BME280::set_osr_humidity_settings(const struct bme280_settings *settings)
ctrl_hum = settings->osr_h & BME280_CTRL_HUM_MSK;
/* Write the humidity control value in the register */
- rslt = set_regs(&reg_addr, &ctrl_hum, 1);
+ rslt = setRegs(&reg_addr, &ctrl_hum, 1);
/* Humidity related changes will be only effective after a
* write operation to ctrl_meas register
@@ -552,10 +552,10 @@ int8_t BME280::set_osr_humidity_settings(const struct bme280_settings *settings)
if (rslt == BME280_OK)
{
reg_addr = BME280_CTRL_MEAS_ADDR;
- rslt = get_regs(reg_addr, &ctrl_meas, 1);
+ rslt = getRegs(reg_addr, &ctrl_meas, 1);
if (rslt == BME280_OK)
{
- rslt = set_regs(&reg_addr, &ctrl_meas, 1);
+ rslt = setRegs(&reg_addr, &ctrl_meas, 1);
}
}
@@ -573,7 +573,7 @@ int8_t BME280::set_osr_press_temp_settings(uint8_t desired_settings,
uint8_t reg_addr = BME280_CTRL_MEAS_ADDR;
uint8_t reg_data;
- rslt = BME280::get_regs(reg_addr, &reg_data, 1);
+ rslt = BME280::getRegs(reg_addr, &reg_data, 1);
if (rslt == BME280_OK)
{
if (desired_settings & BME280_OSR_PRESS_SEL)
@@ -586,7 +586,7 @@ int8_t BME280::set_osr_press_temp_settings(uint8_t desired_settings,
}
/* Write the oversampling settings in the register */
- rslt = BME280::set_regs(&reg_addr, &reg_data, 1);
+ rslt = BME280::setRegs(&reg_addr, &reg_data, 1);
}
return rslt;
@@ -603,7 +603,7 @@ int8_t BME280::set_filter_standby_settings(uint8_t desired_settings,
uint8_t reg_addr = BME280_CONFIG_ADDR;
uint8_t reg_data;
- rslt = get_regs(reg_addr, &reg_data, 1);
+ rslt = getRegs(reg_addr, &reg_data, 1);
if (rslt == BME280_OK)
{
if (desired_settings & BME280_FILTER_SEL)
@@ -616,7 +616,7 @@ int8_t BME280::set_filter_standby_settings(uint8_t desired_settings,
}
/* Write the oversampling settings in the register */
- rslt = set_regs(&reg_addr, &reg_data, 1);
+ rslt = setRegs(&reg_addr, &reg_data, 1);
}
return rslt;
@@ -684,7 +684,7 @@ int8_t BME280::write_power_mode(uint8_t sensor_mode)
uint8_t sensor_mode_reg_val;
/* Read the power mode register */
- rslt = get_regs(reg_addr, &sensor_mode_reg_val, 1);
+ rslt = getRegs(reg_addr, &sensor_mode_reg_val, 1);
/* Set the power mode */
if (rslt == BME280_OK)
@@ -692,7 +692,7 @@ int8_t BME280::write_power_mode(uint8_t sensor_mode)
sensor_mode_reg_val = BME280_SET_BITS_POS_0(sensor_mode_reg_val, BME280_SENSOR_MODE, sensor_mode);
/* Write the power mode in the register */
- rslt = set_regs(&reg_addr, &sensor_mode_reg_val, 1);
+ rslt = setRegs(&reg_addr, &sensor_mode_reg_val, 1);
}
return rslt;
@@ -707,11 +707,11 @@ int8_t BME280::put_device_to_sleep()
uint8_t reg_data[4];
struct bme280_settings settings;
- rslt = get_regs(BME280_CTRL_HUM_ADDR, reg_data, 4);
+ rslt = getRegs(BME280_CTRL_HUM_ADDR, reg_data, 4);
if (rslt == BME280_OK)
{
parse_device_settings(reg_data, &settings);
- rslt = soft_reset();
+ rslt = softReset();
if (rslt == BME280_OK)
{
rslt = reload_device_settings(&settings);
@@ -1050,7 +1050,7 @@ int8_t BME280::get_calib_data()
uint8_t calib_data[BME280_TEMP_PRESS_CALIB_DATA_LEN] = { 0 };
/* Read the calibration data from the sensor */
- rslt = get_regs(reg_addr, calib_data, BME280_TEMP_PRESS_CALIB_DATA_LEN);
+ rslt = getRegs(reg_addr, calib_data, BME280_TEMP_PRESS_CALIB_DATA_LEN);
if (rslt == BME280_OK)
{
/* Parse temperature and pressure calibration data and store
@@ -1060,7 +1060,7 @@ int8_t BME280::get_calib_data()
reg_addr = BME280_HUMIDITY_CALIB_DATA_ADDR;
/* Read the humidity calibration data from the sensor */
- rslt = get_regs(reg_addr, calib_data, BME280_HUMIDITY_CALIB_DATA_LEN);
+ rslt = getRegs(reg_addr, calib_data, BME280_HUMIDITY_CALIB_DATA_LEN);
if (rslt == BME280_OK)
{
/* Parse humidity calibration data and store it in
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 12:46:46 +0000