Age | Commit message (Expand) | Author | Lines |
2018-10-26 | Merge SoftI2C timer={0,1} code paths, adjust timing according to I2C spec | Daniel Friesel | -2/+8 |
2018-10-25 | msp430 i2c: refactor code a bit | Daniel Friesel | -19/+14 |
2018-10-25 | msp430: Fix delay_us/delay_ms for F_CPU≠16MHz | Daniel Friesel | -2/+2 |
2018-10-24 | I2C: Add support for manual / always-on gpio pullups | Daniel Friesel | -0/+4 |
2018-10-23 | POSIX: Improve GPIO emulation | Daniel Friesel | -28/+4 |
2018-10-19 | MSP430 I2C: Enable interrupts for RX mode | Daniel Friesel | -1/+7 |
2018-10-19 | msp430: Notify software if I2C driver is active | Daniel Friesel | -0/+1 |
2018-10-19 | arduino nano: support additional CPU frequencies | Daniel Friesel | -6/+74 |
2018-10-18 | msp430 arch.cc cleanup | Daniel Friesel | -111/+1 |
2018-10-18 | MSP430: Show calculated real timer frequency on 'info" | Daniel Friesel | -1/+49 |
2018-10-16 | MSP430: Support CPU speed variation in microsecond timer | Daniel Friesel | -5/+17 |
2018-10-15 | Enable busy waiting in I2C driver to reach selected I2C clock | Daniel Friesel | -8/+8 |
2018-10-15 | set default for F_I2C | Daniel Friesel | -0/+4 |
2018-10-15 | MSP430 stdout: Support more CPU frequencies | Daniel Friesel | -1/+29 |
2018-10-15 | MSP430: Avoid possible race conditions when going to sleep | Daniel Friesel | -6/+4 |
2018-10-15 | MSP430: Support several CPU speeds | Daniel Friesel | -3/+24 |
2018-10-12 | Makefiles: quiet mode, optional info output | Daniel Friesel | -36/+64 |
2018-10-12 | MSP430 I2C: Configurable I2C frequency | Daniel Friesel | -1/+1 |
2018-10-12 | arduino nano: ignore non-timer interrupts for loop | Daniel Friesel | -5/+15 |
2018-10-12 | half-baked timer implementation for MSP430 and Arduino | Daniel Friesel | -12/+7 |
2018-09-24 | POSIX: Add loop and timer support | Daniel Friesel | -0/+17 |
2018-09-17 | Add #define for POSIX arch | Daniel Friesel | -0/+2 |
2018-09-17 | esp8266: Fix typo | Daniel Friesel | -1/+1 |
2018-08-27 | msp430: Add preprocessor macro for CPU speed | Daniel Friesel | -1/+7 |
2018-08-17 | add timer-supported software i2c + arduino-nano timer | Daniel Friesel | -0/+88 |
2018-08-16 | configurable i2c bitrate on arduino nano | Daniel Friesel | -1/+9 |
2018-08-16 | Blinkenrocket: Configurable I2C speed | Daniel Friesel | -2/+10 |
2018-08-10 | Add i2cbench app | Daniel Friesel | -2/+0 |
2018-08-09 | Optionally disable stdout | Daniel Friesel | -0/+4 |
2018-08-09 | blinkenrocket i2c: Add optional no-interrupt I2C | Daniel Friesel | -2/+9 |
2018-08-08 | Add Blinkenrocket arch | Daniel Friesel | -0/+344 |
2018-08-08 | MSP430: Add delay_ms | Daniel Friesel | -0/+6 |
2018-08-07 | arch: Add delay_ms function | Daniel Friesel | -1/+6 |
2018-08-07 | AVR GPIO: Add pullup support | Daniel Friesel | -0/+13 |
2018-08-07 | Support optional SoftI2C pullups on MSP430 | Daniel Friesel | -1/+8 |
2018-07-27 | arduino-nano: Enable LTO | Daniel Friesel | -1/+1 |
2018-07-17 | Move include/$arch to include/arch/$arch to be consistent with src/ hierarchy | Daniel Friesel | -4/+2 |
2018-07-17 | MSP430: Some idle waiting | Daniel Friesel | -6/+25 |
2018-07-14 | arduino-nano: i2c: Use idle waiting | Daniel Friesel | -18/+21 |
2018-07-12 | Add arch.idle() command | Daniel Friesel | -0/+27 |
2018-07-12 | MSP430: Call loop() from main function to avoid nested interrupts | Daniel Friesel | -3/+15 |
2018-07-12 | Fix i2c feature syntax in arch Makefiles | Daniel Friesel | -2/+2 |
2018-07-12 | Add I2C Detect app | Daniel Friesel | -0/+146 |
2018-07-12 | Only include hw i2c drivers if sw i2c is not active | Daniel Friesel | -4/+12 |
2018-07-12 | Add delay_us on AVR arch | Daniel Friesel | -0/+6 |
2018-07-12 | Extend ESP8266 GPIO | Daniel Friesel | -3/+125 |
2018-01-16 | esp8266 stdout: add printf_uint8 and printf_float | Daniel Friesel | -0/+35 |
2018-01-15 | msp430 i2c: clear TXIFG after sending the last byte | Daniel Friesel | -0/+1 |
2018-01-12 | add arduino nano stdin driver | Daniel Friesel | -1/+44 |
2018-01-12 | add stdin for esp8266 and msp430 as well as preliminary shell app | Daniel Friesel | -2/+127 |