1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
|
# vim:ft=make
#
# Copyright 2020 Daniel Friesel
#
# SPDX-License-Identifier: BSD-2-Clause
SERIAL_PORT ?= ttyACM0
cpu_freq ?= 168000000
INCLUDES += -Iext/libopencm3/include
COMMON_FLAGS += --static -nostartfiles -g3 -Os -fno-common
COMMON_FLAGS += -ffunction-sections -fdata-sections
COMMON_FLAGS += -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -DSTM32F4
CC = arm-none-eabi-gcc
CXX = arm-none-eabi-g++
OBJCOPY = arm-none-eabi-objcopy
OBJDUMP = arm-none-eabi-objdump
SIZE = arm-none-eabi-size
CXX_TARGETS += src/arch/stm32f446re-nucleo/arch.cc
ifdef CONFIG_aspectc
CXX = ag++ -r build/repo.acp -v 0 --c_compiler arm-none-eabi-g++ -p . --Xcompiler
endif
ifneq ($(findstring adc,${arch_drivers}), )
CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/adc.cc
endif
CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/gpio.cc
CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/stdout.cc
# Commandline
ifneq ($(findstring counter,${arch_drivers}), )
CONFIG_arch_stm32f446re_nucleo_driver_counter = y
endif
#ifneq ($(findstring timer,${arch_drivers}), )
# CONFIG_arch_stm32f446re_nucleo_driver_timer = y
#endif
ifeq (${timer_s}, 1)
CONFIG_arch_stm32f446re_nucleo_driver_uptime = y
endif
# Kconfig
ifdef CONFIG_arch_stm32f446re_nucleo_driver_counter
CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/counter.cc
endif
#ifdef CONFIG_arch_stm32f446re_nucleo_driver_timer
# CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/timer.cc
#endif
ifdef CONFIG_arch_stm32f446re_nucleo_driver_uptime
COMMON_FLAGS += -DTIMER_S
CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/uptime.cc
endif
ifneq (${cpu_freq}, )
COMMON_FLAGS += -DF_CPU=${cpu_freq}UL
else
COMMON_FLAGS += -DF_CPU=168000000UL
endif
OBJECTS = ${CXX_TARGETS:.cc=.o} ${C_TARGETS:.c=.o} ${ASM_TARGETS:.S=.o}
.cc.o:
${QUIET}${CXX} ${INCLUDES} ${COMMON_FLAGS} ${CXXFLAGS} -c -o $@ ${@:.o=.cc}
.c.o:
${QUIET}${CC} ${INCLUDES} ${COMMON_FLAGS} ${CFLAGS} -c -o $@ ${@:.o=.c}
.S.o:
${QUIET}${CC} ${INCLUDES} ${COMMON_FLAGS} -c -o $@ ${@:.o=.S}
.s.o:
${QUIET}${CC} ${INCLUDES} ${COMMON_FLAGS} -c -o $@ ${@:.o=.S}
ext/libopencm3/Makefile:
git submodule update --init
ext/libopencm3/lib/libopencm3_stm32f4.a: ext/libopencm3/Makefile
${MAKE} -C ext/libopencm3
build/system.elf: ${OBJECTS} ext/libopencm3/lib/libopencm3_stm32f4.a
${QUIET}mkdir -p build
${QUIET}${CXX} ${INCLUDES} ${COMMON_FLAGS} ${CXXFLAGS} \
-Lext/libopencm3/lib -Wl,--gc-sections \
-Wl,--start-group -lc -lgcc -lnosys -Wl,--end-group \
-T src/arch/stm32f446re-nucleo/stm32f446.ld \
${OBJECTS} -lopencm3_stm32f4 \
-o $@
program: build/system.elf
openocd -c 'source [find interface/stlink-v2-1.cfg]' \
-c 'transport select hla_swd' -c 'source [find target/stm32f4x.cfg]' \
-c 'reset_config srst_only' -c '$$_TARGETNAME configure -rtos auto' \
-c 'reset_config connect_assert_srst' -c init -c targets \
-c 'reset halt' -c 'flash write_image erase "build/system.elf" 0' \
-c 'verify_image "build/system.elf" 0' -c 'reset run' -c 'shutdown'
arch_clean:
${QUIET}rm -f ${OBJECTS}
monitor:
${QUIET}screen /dev/${SERIAL_PORT} 115200
arch_help:
@echo "stm32f446re-nucleo specific flags:"
@echo " cpu_freq = ${cpu_freq} (desired CPU frequency in Hz)"
@echo " supported frequencies: 84 / 168 / 180 MHz"
arch_info:
@echo "CPU Freq: ${cpu_freq} Hz"
@echo "Timer Freq: ${timer_freq} Hz -> $(shell src/arch/stm32f446re-nucleo/model.py f_timer "${cpu_freq}" "${timer_freq}")"
@echo "I2C Freq: ${i2c_freq} Hz"
@echo "Counter Overflow: 65536/255"
@echo "Monitor: /dev/${SERIAL_PORT} 115200"
attributes: build/system.elf
${QUIET}script/size.py ${SIZE} text,data data,bss
.PHONY: arch_clean arch_help arch_info attributes monitor program
|
