lora32u4ii: Add ADC driver

3 files changed, 148 insertions, 0 deletions

diff --git a/src/arch/lora32u4ii/Kconfig b/src/arch/lora32u4ii/Kconfig
new file mode 100644
index 0000000..eb85780
--- /dev/null
+++ b/src/arch/lora32u4ii/Kconfig
@@ -0,0 +1,19 @@
+# Copyright 2021 Daniel Friesel
+#
+# SPDX-License-Identifier: CC0-1.0
+
+config arch_lora32u4ii_cpufreq
+int "CPU Frequency"
+#!accept [62500, 125000, 250000, 500000, 1000000, 2000000, 4000000, 8000000]
+range 62500 8000000
+default 8000000
+help
+  Assumes an externel 8MHz crystal to be present
+
+config arch_lora32u4ii_driver_adc
+bool "ADC (Analog-Digital-Converter)"
+select meta_driver_adc
+
+config arch_lora32u4ii_driver_uptime
+bool "Uptime Counter"
+select meta_driver_uptime
diff --git a/src/arch/lora32u4ii/Makefile.inc b/src/arch/lora32u4ii/Makefile.inc
index 06ac1f9..3aeefa8 100644
--- a/src/arch/lora32u4ii/Makefile.inc
+++ b/src/arch/lora32u4ii/Makefile.inc
@@ -44,8 +44,16 @@ ifeq (${timer_s}, 1)
 	CONFIG_arch_lora32u4ii_driver_uptime = y
 endif
 
+ifneq ($(findstring adc,${arch_drivers}), )
+	CONFIG_arch_lora32u4ii_driver_adc = y
+endif
+
 # Kconfig driver selection
 
+ifdef CONFIG_arch_lora32u4ii_driver_adc
+	CXX_TARGETS += src/arch/lora32u4ii/driver/adc.cc
+endif
+
 ifdef CONFIG_arch_lora32u4ii_driver_uptime
 	COMMON_FLAGS += -DTIMER_S
 	CXX_TARGETS += src/arch/lora32u4ii/driver/uptime.cc
diff --git a/src/arch/lora32u4ii/driver/adc.cc b/src/arch/lora32u4ii/driver/adc.cc
new file mode 100644
index 0000000..5dd5d4d
--- /dev/null
+++ b/src/arch/lora32u4ii/driver/adc.cc
@@ -0,0 +1,121 @@
+#include <avr/io.h>
+
+#include "arch.h"
+#include "driver/adc.h"
+#include "driver/gpio.h"
+
+int16_t AVRADC::getTemp_mdegC(int16_t offset)
+{
+	// Measure temperature probe with internal 2.56V bandgap reference
+	ADMUX = _BV(REFS1) |  _BV(REFS0) | 0x07;
+	ADCSRB = _BV(MUX5);
+
+	// Enable ADC with /64 prescaler
+	ADCSRA = _BV(ADEN) | _BV(ADPS2) | _BV(ADPS1);
+
+	// Wait for bandgap and temperature references to stabilise
+	arch.delay_ms(1);
+
+	// Start conversion
+	ADCSRA |= _BV(ADSC);
+
+	// Wait for conversion to complete
+	while (ADCSRA & _BV(ADSC)) ;
+
+	// TODO this is for atmega328p, not atmega32u4
+	// typical values: 242 mV @ -45 degC
+	// typical values: 314 mV @ +25 degC
+	// typical values: 380 mV @ +85 degC
+	// slope: 0.9090.. degC / mV at  25 .. 85 degC
+	// -> approx. 286.5 mV @ 0 degC / approx -260.45 degC @ 0 mV
+	// -> T[degC] = ADC[mV] * 0.91 - 261
+	// -> T[mdegC] = ADC[mV] * 91 - 26100
+	// slope: 0.9722.. mV / degC at -45 .. 25 degC
+	// slope: 0.942    mV / degC at -45 .. 85 degC
+	uint8_t adcr_l = ADCL;
+	uint8_t adcr_h = ADCH;
+	uint16_t adcr = adcr_l + (adcr_h << 8);
+	uint16_t vadc = 1100L * adcr / 1023L;
+
+	// adjust for chip-specific variations
+	vadc += offset;
+
+	int16_t temp_mdegc = vadc * 91 - 26100L;
+
+	// Disable ADC
+	ADCSRA &= ~_BV(ADEN);
+
+	return temp_mdegc;
+}
+
+uint16_t AVRADC::getVCC_mV()
+{
+	// Measure internal 1.1V bandgap using VCC as reference
+	ADMUX = _BV(REFS0) | 0x1e;
+	ADCSRB = 0;
+
+	// Enable ADC with /64 prescaler
+	ADCSRA = _BV(ADEN) | _BV(ADPS2) | _BV(ADPS1);
+
+	// Wait for bandgap to stabilise
+	arch.delay_ms(1);
+
+	// Start conversion
+	ADCSRA |= _BV(ADSC);
+
+	// Wait for conversion to complete
+	while (ADCSRA & _BV(ADSC)) ;
+
+	uint8_t adcr_l = ADCL;
+	uint8_t adcr_h = ADCH;
+	uint16_t adcr = adcr_l + (adcr_h << 8);
+	uint16_t vcc = 1100L * 1023 / adcr;
+
+	// Disable ADC
+	ADCSRA &= ~_BV(ADEN);
+
+	return vcc;
+}
+
+uint16_t AVRADC::getVBat_mV(bool controlCharger)
+{
+	// Measure VBat/2 (via voltage divider on PB5 / ADC12) using VCC as reference.
+	// Caution: PB5 is also connected to the white user LED.
+	ADMUX = _BV(REFS0) | 0x04;
+	ADCSRB = _BV(MUX5);
+
+	// Enable ADC with /64 prescaler
+	ADCSRA = _BV(ADEN) | _BV(ADPS2) | _BV(ADPS1);
+
+	if (controlCharger) {
+		// Turn on Vbat/2 voltage divider (and charger!)
+		gpio.output(GPIO::pb0, 1);
+	}
+
+	// Wait for things to stabilise
+	arch.delay_ms(1);
+
+	// Start conversion
+	ADCSRA |= _BV(ADSC);
+
+	// Wait for conversion to complete
+	while (ADCSRA & _BV(ADSC)) ;
+
+	uint8_t adcr_l = ADCL;
+	uint8_t adcr_h = ADCH;
+	uint16_t adcr = adcr_l + (adcr_h << 8);
+	uint16_t vbat = 4200L * adcr / 1023;
+
+	// Disable ADC
+	ADCSRA &= ~_BV(ADEN);
+
+	if (controlCharger) {
+		// Turn off voltage divider (and charger!)
+		gpio.output(GPIO::pb0, 0);
+	}
+
+	return vbat;
+}
+
+
+AVRADC adc;