Add I2C Detect app

3 files changed, 216 insertions, 2 deletions

diff --git a/src/app/i2cdetect/main.cc b/src/app/i2cdetect/main.cc
new file mode 100644
index 0000000..32f3a18
--- /dev/null
+++ b/src/app/i2cdetect/main.cc
@@ -0,0 +1,59 @@
+#include "arch.h"
+#include "driver/gpio.h"
+#include "driver/stdout.h"
+#if defined(MULTIPASS_ARCH_HAS_I2C) && !defined(DRIVER_SOFTI2C)
+#include "driver/i2c.h"
+#else
+#include "driver/soft_i2c.h"
+#endif
+#include "driver/lm75.h"
+//#include "driver/mmsimple.h"
+
+void loop(void)
+{
+	kout.printf_float(lm75.getTemp());
+	kout << endl;
+	//moody.toggleBlue();
+}
+
+int main(void)
+{
+	unsigned int i2c_status[128 / (8 * sizeof(unsigned int)) + 1];
+
+	arch.setup();
+	gpio.setup();
+	kout.setup();
+
+	if (i2c.setup() != 0) {
+		return 1;
+	}
+
+	kout << "I2C setup OK" << endl;
+
+	for (unsigned char i = 0; i < sizeof(i2c_status)/sizeof(unsigned int); i++) {
+		i2c_status[i] = 0;
+	}
+
+	i2c.scan(i2c_status);
+
+	kout << "     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f";
+	for (unsigned char address = 0; address < 128; address++) {
+		if ((address & 0x0f) == 0) {
+			kout << endl;
+			kout.printf_uint8(address);
+			kout << ":";
+		}
+
+		if (i2c_status[address / (8 * sizeof(unsigned int))] & (1 << (address % (8 * sizeof(unsigned int))))) {
+			kout << " ";
+			kout.printf_uint8(address);
+		} else {
+			kout << " --";
+		}
+	}
+	kout << endl;
+
+	arch.idle_loop();
+
+	return 0;
+}
diff --git a/src/arch/arduino-nano/driver/i2c.cc b/src/arch/arduino-nano/driver/i2c.cc
new file mode 100644
index 0000000..a644ca9
--- /dev/null
+++ b/src/arch/arduino-nano/driver/i2c.cc
@@ -0,0 +1,146 @@
+#include "driver/i2c.h"
+#include <avr/io.h>
+
+/*
+ * Send an I2C (re)start condition and the EEPROM address in read mode. Returns
+ * after it has been transmitted successfully.
+ */
+static signed char i2c_start_read(unsigned char addr)
+{
+	TWCR = _BV(TWINT) | _BV(TWSTA) | _BV(TWEN);
+	while (!(TWCR & _BV(TWINT)));
+	if (!(TWSR & 0x18)) // 0x08 == START ok, 0x10 == RESTART ok
+		return -1;
+
+	// Note: The R byte ("... | 1") causes the TWI momodule to switch to
+	// Master Receive mode
+	TWDR = (addr << 1) | 1;
+	TWCR = _BV(TWINT) | _BV(TWEN);
+	while (!(TWCR & _BV(TWINT)));
+	if (TWSR != 0x40) // 0x40 == SLA+R transmitted, ACK receveid
+		return -2;
+
+	return 0;
+}
+
+/*
+ * Send an I2C (re)start condition and the EEPROM address in write mode.
+ * Returns after it has been transmitted successfully.
+ */
+static signed char i2c_start_write(unsigned char addr)
+{
+	TWCR = _BV(TWINT) | _BV(TWSTA) | _BV(TWEN);
+	while (!(TWCR & _BV(TWINT)));
+	if (!(TWSR & 0x18)) // 0x08 == START ok, 0x10 == RESTART ok
+		return -1;
+
+	TWDR = (addr<< 1) | 0;
+	TWCR = _BV(TWINT) | _BV(TWEN);
+	while (!(TWCR & _BV(TWINT)));
+	if (TWSR != 0x18) // 0x18 == SLA+W transmitted, ACK received
+		return -2;
+
+	return 0;
+}
+
+/*
+ * Send an I2C stop condition.
+ */
+static signed char i2c_stop()
+{
+	TWCR = _BV(TWINT) | _BV(TWSTO) | _BV(TWEN);
+}
+
+/*
+ * Sends len bytes to the EEPROM. Note that this method does NOT
+ * send I2C start or stop conditions.
+ */
+static signed char i2c_send(uint8_t len, uint8_t *data)
+{
+	uint8_t pos = 0;
+
+	for (pos = 0; pos < len; pos++) {
+		TWDR = data[pos];
+		TWCR = _BV(TWINT) | _BV(TWEN);
+		while (!(TWCR & _BV(TWINT)));
+		if (TWSR != 0x28) // 0x28 == byte transmitted, ACK received
+			return pos;
+	}
+
+	return pos;
+}
+
+/*
+ * Receives len bytes from the EEPROM into data. Note that this method does
+ * NOT send I2C start or stop conditions.
+ */
+static signed char i2c_receive(uint8_t len, uint8_t *data)
+{
+	uint8_t pos = 0;
+
+	for (pos = 0; pos < len; pos++) {
+		if (pos == len-1) {
+			// Don't ACK the last byte
+			TWCR = _BV(TWINT) | _BV(TWEN);
+		} else {
+			// Automatically send ACK
+			TWCR = _BV(TWINT) | _BV(TWEN) | _BV(TWEA);
+		}
+		while (!(TWCR & _BV(TWINT)));
+		data[pos] = TWDR;
+		/*
+		 * No error handling here -- We send the acks, the EEPROM only
+		 * supplies raw data, so there's no way of knowing whether it's still
+		 * talking to us or we're just reading garbage.
+		 */
+	}
+
+	return pos;
+}
+
+signed char I2C::setup()
+{
+	TWSR = 0;
+	TWBR = ((F_CPU / 100000UL) - 16) / 2;
+
+	return 0;
+}
+
+void I2C::scan(unsigned int *results)
+{
+	for (unsigned char address = 0; address < 128; address++) {
+		if (i2c_start_read(address) == 0) {
+			results[address / (8 * sizeof(unsigned int))] |= 1 << (address % (8 * sizeof(unsigned int)));
+		}
+	}
+	i2c_stop();
+}
+
+signed char I2C::xmit(unsigned char address,
+		unsigned char tx_len, unsigned char *tx_buf,
+		unsigned char rx_len, unsigned char *rx_buf)
+{
+	unsigned char i;
+
+	if (tx_len) {
+		if (i2c_start_write(address) < 0) {
+			return -1;
+		}
+		if (i2c_send(tx_len, tx_buf) < 0) {
+			return -1;
+		}
+	}
+	if (rx_len) {
+		if (i2c_start_read(address) < 0) {
+			return -1;
+		}
+		if (i2c_receive(rx_len, rx_buf) < 0) {
+			return -1;
+		}
+	}
+
+	i2c_stop();
+	return 0;
+}
+
+I2C i2c;
diff --git a/src/driver/soft_i2c.cc b/src/driver/soft_i2c.cc
index f8ee052..94ab261 100644
--- a/src/driver/soft_i2c.cc
+++ b/src/driver/soft_i2c.cc
@@ -20,6 +20,8 @@ void SoftI2C::start()
 
 void SoftI2C::stop()
 {
+	gpio.output(scl);
+	//
 	gpio.output(sda);
 	//
 	gpio.input(scl);
@@ -79,12 +81,13 @@ void SoftI2C::scan(unsigned int *results)
 	unsigned char i2caddr;
 	for (unsigned char address = 0; address < 128; address++) {
 
-		i2caddr = (address << 1) | 1;
+		i2caddr = (address << 1) | 0;
 
 		start();
 
 		if (tx(i2caddr)) {
 			results[address / (8 * sizeof(unsigned int))] |= 1 << (address % (8 * sizeof(unsigned int)));
+			stop();
 		}
 	}
 	stop();
@@ -109,7 +112,7 @@ signed char SoftI2C::xmit(unsigned char address,
 		tx((address << 1) | 1);
 
 		for (i = 1; i <= rx_len; i++) {
-			rx_buf[i] = rx((i < rx_len) * 1);
+			rx_buf[i-1] = rx((i < rx_len) * 1);
 		}
 	}
 
@@ -118,4 +121,10 @@ signed char SoftI2C::xmit(unsigned char address,
 	return 0;
 }
 
+#ifdef MULTIPASS_ARCH_esp8266
+SoftI2C i2c(GPIO::d7, GPIO::d8);
+#elif MULTIPASS_ARCH_arduino_nano
+SoftI2C i2c(GPIO::pc5, GPIO::pc4);
+#elif MULTIPASS_ARCH_msp430fr5969lp
 SoftI2C i2c(GPIO::p1_6, GPIO::p1_7);
+#endif