diff options
Diffstat (limited to 'include/arch/rm46l8lp/halcogen/reg_mibspi.h')
| -rw-r--r-- | include/arch/rm46l8lp/halcogen/reg_mibspi.h | 257 |
1 files changed, 257 insertions, 0 deletions
diff --git a/include/arch/rm46l8lp/halcogen/reg_mibspi.h b/include/arch/rm46l8lp/halcogen/reg_mibspi.h new file mode 100644 index 0000000..a696f40 --- /dev/null +++ b/include/arch/rm46l8lp/halcogen/reg_mibspi.h @@ -0,0 +1,257 @@ +/** @file reg_mibspi.h +* @brief MIBSPI Register Layer Header File +* @date 11-Dec-2018 +* @version 04.07.01 +* +* This file contains: +* - Definitions +* - Types +* - Interface Prototypes +* . +* which are relevant for the MIBSPI driver. +*/ + +/* +* Copyright (C) 2009-2018 Texas Instruments Incorporated - www.ti.com +* +* +* Redistribution and use in source and binary forms, with or without +* modification, are permitted provided that the following conditions +* are met: +* +* Redistributions of source code must retain the above copyright +* notice, this list of conditions and the following disclaimer. +* +* Redistributions in binary form must reproduce the above copyright +* notice, this list of conditions and the following disclaimer in the +* documentation and/or other materials provided with the +* distribution. +* +* Neither the name of Texas Instruments Incorporated nor the names of +* its contributors may be used to endorse or promote products derived +* from this software without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +*/ + + +#ifndef __REG_MIBSPI_H__ +#define __REG_MIBSPI_H__ + +#include "sys_common.h" +#include "reg_gio.h" + + + +/* USER CODE BEGIN (0) */ +/* USER CODE END */ + +/* Mibspi Register Frame Definition */ +/** @struct mibspiBase +* @brief MIBSPI Register Definition +* +* This structure is used to access the MIBSPI module registers. +*/ +/** @typedef mibspiBASE_t +* @brief MIBSPI Register Frame Type Definition +* +* This type is used to access the MIBSPI Registers. +*/ +typedef volatile struct mibspiBase +{ + uint32 GCR0; /**< 0x0000: Global Control 0 */ + uint32 GCR1; /**< 0x0004: Global Control 1 */ + uint32 INT0; /**< 0x0008: Interrupt Register */ + uint32 LVL; /**< 0x000C: Interrupt Level */ + uint32 FLG; /**< 0x0010: Interrupt flags */ + uint32 PC0; /**< 0x0014: Function Pin Enable */ + uint32 PC1; /**< 0x0018: Pin Direction */ + uint32 PC2; /**< 0x001C: Pin Input Latch */ + uint32 PC3; /**< 0x0020: Pin Output Latch */ + uint32 PC4; /**< 0x0024: Output Pin Set */ + uint32 PC5; /**< 0x0028: Output Pin Clr */ + uint32 PC6; /**< 0x002C: Open Drain Output Enable */ + uint32 PC7; /**< 0x0030: Pullup/Pulldown Disable */ + uint32 PC8; /**< 0x0034: Pullup/Pulldown Selection */ + uint32 DAT0; /**< 0x0038: Transmit Data */ + uint32 DAT1; /**< 0x003C: Transmit Data with Format and Chip Select */ + uint32 BUF; /**< 0x0040: Receive Buffer */ + uint32 EMU; /**< 0x0044: Emulation Receive Buffer */ + uint32 DELAY; /**< 0x0048: Delays */ + uint32 DEF; /**< 0x004C: Default Chip Select */ + uint32 FMT0; /**< 0x0050: Data Format 0 */ + uint32 FMT1; /**< 0x0054: Data Format 1 */ + uint32 FMT2; /**< 0x0058: Data Format 2 */ + uint32 FMT3; /**< 0x005C: Data Format 3 */ + uint32 INTVECT0; /**< 0x0060: Interrupt Vector 0 */ + uint32 INTVECT1; /**< 0x0064: Interrupt Vector 1 */ + uint32 SRSEL; /**< 0x0068: Slew Rate Select */ + uint32 PMCTRL; /**< 0x006C: Parallel Mode Control */ + uint32 MIBSPIE; /**< 0x0070: Multi-buffer Mode Enable */ + uint32 TGITENST; /**< 0x0074: TG Interrupt Enable Set */ + uint32 TGITENCR; /**< 0x0078: TG Interrupt Enable Clear */ + uint32 TGITLVST; /**< 0x007C: Transfer Group Interrupt Level Set */ + uint32 TGITLVCR; /**< 0x0080: Transfer Group Interrupt Level Clear */ + uint32 TGINTFLG; /**< 0x0084: Transfer Group Interrupt Flag */ + uint32 rsvd1[2U]; /**< 0x0088: Reserved */ + uint32 TICKCNT; /**< 0x0090: Tick Counter */ + uint32 LTGPEND; /**< 0x0090: Last TG End Pointer */ + uint32 TGCTRL[16U]; /**< 0x0098 - 0x00D4: Transfer Group Control */ + uint32 DMACTRL[8U]; /**< 0x00D8 - 0x00F4: DMA Control */ + uint32 DMACOUNT[8U]; /**< 0x00F8 - 0x0114: DMA Count */ + uint32 DMACNTLEN; /**< 0x0118 - 0x0114: DMA Control length */ + uint32 rsvd2; /**< 0x011C: Reserved */ + uint32 UERRCTRL; /**< 0x0120: Multi-buffer RAM Uncorrectable Parity Error Control */ + uint32 UERRSTAT; /**< 0x0124: Multi-buffer RAM Uncorrectable Parity Error Status */ + uint32 UERRADDRRX; /**< 0x0128: RXRAM Uncorrectable Parity Error Address */ + uint32 UERRADDRTX; /**< 0x012C: TXRAM Uncorrectable Parity Error Address */ + uint32 RXOVRN_BUF_ADDR; /**< 0x0130: RXRAM Overrun Buffer Address */ + uint32 IOLPKTSTCR; /**< 0x0134: IO loopback */ + uint32 EXT_PRESCALE1; /**< 0x0138: */ + uint32 EXT_PRESCALE2; /**< 0x013C: */ +} mibspiBASE_t; + + +/** @def mibspiREG1 +* @brief MIBSPI1 Register Frame Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi module registers. +*/ +#define mibspiREG1 ((mibspiBASE_t *)0xFFF7F400U) + + +/** @def mibspiPORT1 +* @brief MIBSPI1 GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of MIBSPI1 +* (use the GIO drivers to access the port pins). +*/ +#define mibspiPORT1 ((gioPORT_t *)0xFFF7F418U) + +/** @def mibspiREG3 +* @brief MIBSPI3 Register Frame Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi module registers. +*/ +#define mibspiREG3 ((mibspiBASE_t *)0xFFF7F800U) + + +/** @def mibspiPORT3 +* @brief MIBSPI3 GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of MIBSPI3 +* (use the GIO drivers to access the port pins). +*/ +#define mibspiPORT3 ((gioPORT_t *)0xFFF7F818U) + +/** @def mibspiREG5 +* @brief MIBSPI5 Register Frame Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi module registers. +*/ +#define mibspiREG5 ((mibspiBASE_t *)0xFFF7FC00U) + + +/** @def mibspiPORT5 +* @brief MIBSPI5 GIO Port Register Pointer +* +* Pointer used by the GIO driver to access I/O PORT of MIBSPI5 +* (use the GIO drivers to access the port pins). +*/ +#define mibspiPORT5 ((gioPORT_t *)0xFFF7FC18U) + + +/** @struct mibspiRamBase +* @brief MIBSPI Buffer RAM Definition +* +* This structure is used to access the MIBSPI buffer memory. +*/ +/** @typedef mibspiRAM_t +* @brief MIBSPI RAM Type Definition +* +* This type is used to access the MIBSPI RAM. +*/ +typedef volatile struct mibspiRamBase +{ + struct + { +#if ((__little_endian__ == 1) || (__LITTLE_ENDIAN__ == 1)) + uint16 data; /**< tx buffer data */ + uint16 control; /**< tx buffer control */ +#else + uint16 control; /**< tx buffer control */ + uint16 data; /**< tx buffer data */ +#endif + } tx[128]; + struct + { +#if ((__little_endian__ == 1) || (__LITTLE_ENDIAN__ == 1)) + uint16 data; /**< rx buffer data */ + uint16 flags; /**< rx buffer flags */ +#else + uint16 flags; /**< rx buffer flags */ + uint16 data; /**< rx buffer data */ +#endif + } rx[128]; +} mibspiRAM_t; + + +/** @def mibspiRAM1 +* @brief MIBSPI1 Buffer RAM Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi buffer memory. +*/ +#define mibspiRAM1 ((mibspiRAM_t *)0xFF0E0000U) + +/** @def mibspiRAM3 +* @brief MIBSPI3 Buffer RAM Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi buffer memory. +*/ +#define mibspiRAM3 ((mibspiRAM_t *)0xFF0C0000U) + +/** @def mibspiRAM5 +* @brief MIBSPI5 Buffer RAM Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi buffer memory. +*/ +#define mibspiRAM5 ((mibspiRAM_t *)0xFF0A0000U) + +/** @def mibspiPARRAM1 +* @brief MIBSPI1 Buffer RAM PARITY Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi buffer memory. +*/ +#define mibspiPARRAM1 (*(volatile uint32 *)(0xFF0E0000U + 0x00000400U)) + +/** @def mibspiPARRAM3 +* @brief MIBSPI3 Buffer RAM PARITY Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi buffer memory. +*/ +#define mibspiPARRAM3 (*(volatile uint32 *)(0xFF0C0000U + 0x00000400U)) + + +/** @def mibspiPARRAM5 +* @brief MIBSPI5 Buffer RAM PARITY Pointer +* +* This pointer is used by the MIBSPI driver to access the mibspi buffer memory. +*/ +#define mibspiPARRAM5 (*(volatile uint32 *)(0xFF0A0000U + 0x00000400U)) + +/* USER CODE BEGIN (1) */ +/* USER CODE END */ + + +#endif |