summaryrefslogtreecommitdiff
path: root/src/arch/stm32f446re-nucleo/Makefile.inc
blob: 33872e0e38de37469943fd7a60da5c1c04d2f7cc (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
# vim:ft=make
#
# Copyright 2020 Daniel Friesel
#
# SPDX-License-Identifier: BSD-2-Clause

SERIAL_PORT ?= ttyACM0

cpu_freq ?= 168000000

INCLUDES += -Iext/libopencm3/include

COMMON_FLAGS += --static -nostartfiles -g3 -Os -fno-common
COMMON_FLAGS += -ffunction-sections -fdata-sections
COMMON_FLAGS += -mcpu=cortex-m4 -mthumb -mfloat-abi=hard -mfpu=fpv4-sp-d16 -DSTM32F4

CC = arm-none-eabi-gcc
CXX = arm-none-eabi-g++
OBJCOPY = arm-none-eabi-objcopy
OBJDUMP = arm-none-eabi-objdump
SIZE = arm-none-eabi-size

ARCH_SHORTNAME = stm32f4

CXX_TARGETS += src/arch/stm32f446re-nucleo/arch.cc

ifdef CONFIG_aspectc
	CXX = ag++ -r build/repo.acp -v 0 --c_compiler arm-none-eabi-g++ -p . --Xcompiler
endif

ifneq ($(findstring adc,${arch_drivers}), )
	CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/adc.cc
endif

CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/gpio.cc
CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/stdout.cc

# Commandline

ifneq ($(findstring counter,${arch_drivers}), )
	CONFIG_arch_stm32f446re_nucleo_driver_counter = y
endif

#ifneq ($(findstring timer,${arch_drivers}), )
#	CONFIG_arch_stm32f446re_nucleo_driver_timer = y
#endif

ifeq (${timer_s}, 1)
	CONFIG_arch_stm32f446re_nucleo_driver_uptime = y
endif

# Kconfig

ifdef CONFIG_arch_stm32f446re_nucleo_driver_counter
	CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/counter.cc
endif

#ifdef CONFIG_arch_stm32f446re_nucleo_driver_timer
#	CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/timer.cc
#endif

ifdef CONFIG_arch_stm32f446re_nucleo_driver_uptime
	COMMON_FLAGS += -DTIMER_S
	CXX_TARGETS += src/arch/stm32f446re-nucleo/driver/uptime.cc
endif


ifneq (${cpu_freq}, )
	COMMON_FLAGS += -DF_CPU=${cpu_freq}UL
else
	COMMON_FLAGS += -DF_CPU=168000000UL
endif


OBJECTS = ${CXX_TARGETS:.cc=.o} ${C_TARGETS:.c=.o} ${ASM_TARGETS:.S=.o}

%.o : %.cc | include/config.h
	${QUIET}${CXX} ${INCLUDES} ${COMMON_FLAGS} ${CXXFLAGS} -c -o $@ ${@:.o=.cc}

%.o : %.c | include/config.h
	${QUIET}${CC} ${INCLUDES} ${COMMON_FLAGS} ${CFLAGS} -c -o $@ ${@:.o=.c}

%.o : %.S | include/config.h
	${QUIET}${CC} ${INCLUDES} ${COMMON_FLAGS} -c -o $@ ${@:.o=.S}

%.o : %.s | include/config.h
	${QUIET}${CC} ${INCLUDES} ${COMMON_FLAGS} -c -o $@ ${@:.o=.S}

build/system.elf: ${OBJECTS} ext/libopencm3/lib/libopencm3_stm32f4.a
	${QUIET}mkdir -p build
	${QUIET}${CXX} ${INCLUDES} ${COMMON_FLAGS} ${CXXFLAGS} \
		-Lext/libopencm3/lib -Wl,--gc-sections \
		-Wl,--start-group -lc -lgcc -lnosys -Wl,--end-group \
		-T src/arch/stm32f446re-nucleo/stm32f446.ld \
		${OBJECTS} -lopencm3_stm32f4 \
		-o $@
	${QUIET}${SIZE} build/system.elf | tail -n1 | awk '{ print "  ROM: " ($$1+$$2) " (" int(($$1+$$2)*100/524288) "%)     RAM: " ($$2 + $$3) " (" int(($$2+$$3)*100/131072) "%)" }'

ext/libopencm3/Makefile:
	git submodule update --init

ext/libopencm3/lib/libopencm3_stm32f4.a: ext/libopencm3/Makefile
	${MAKE} -C ext/libopencm3

program: build/system.elf
	openocd -c 'source [find interface/stlink-v2-1.cfg]' \
		-c 'transport select hla_swd' -c 'source [find target/stm32f4x.cfg]' \
		-c 'reset_config srst_only' -c '$$_TARGETNAME configure -rtos auto' \
		-c 'reset_config connect_assert_srst' -c init -c targets \
		-c 'reset halt' -c 'flash write_image erase "build/system.elf" 0' \
		-c 'verify_image "build/system.elf" 0' -c 'reset run' -c 'shutdown'

arch_clean:
	${QUIET}rm -f ${OBJECTS}

cat:
	${QUIET}script/cat.py /dev/${SERIAL_PORT} 115200 ${cpu_freq} 65536

monitor:
	${QUIET}screen /dev/${SERIAL_PORT} 115200

arch_help:
	@echo "stm32f446re-nucleo specific flags:"
	@echo "    cpu_freq = ${cpu_freq} (desired CPU frequency in Hz)"
	@echo "        supported frequencies: 84 / 168 / 180 MHz"

arch_info:
	@echo "CPU   Freq: ${cpu_freq} Hz"
	@echo "Timer Freq: ${timer_freq} Hz -> $(shell src/arch/stm32f446re-nucleo/model.py f_timer "${cpu_freq}" "${timer_freq}")"
	@echo "I2C   Freq: ${i2c_freq} Hz"
	@echo "Counter Overflow: 4294967296/255"
	@echo "Monitor: /dev/${SERIAL_PORT} 115200"

attributes: build/system.elf
	${QUIET}script/size.py ${SIZE} text,data data,bss

nfpvalues: build/system.elf
	${QUIET}script/nfpvalues.py ${SIZE} text,data data,bss

.PHONY: arch_clean arch_help arch_info attributes cat monitor program