blob: a0b48bb692cf619f685a049b96d58c7d12365c63 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
|
# Name: Makefile
# Project: PowerSwitch
# Author: Christian Starkjohann
# Creation Date: 2004-12-29
# Tabsize: 4
# Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
# License: GNU GPL v2 (see License.txt) or proprietary (CommercialLicense.txt)
#
# Edited by Daniel Friesel
MCU ?= attiny2313
AVRDUDE_PROGRAMMER ?= usbasp
AVRCC ?= avr-gcc
AVRFLASH ?= avrdude
AVRNM ?= avr-nm
AVROBJCOPY ?= avr-objcopy
AVROBJDUMP ?= avr-objdump
CFLAGS += -mmcu=attiny2313 -DF_CPU=16000000
CFLAGS += -Wall -Os -Iusbdrv -I.
OBJECTS = usbdrv/usbdrv.o usbdrv/usbdrvasm.o usbdrv/oddebug.o main.o
all: main.hex
.c.o:
${AVRCC} ${CFLAGS} -c $< -o $@
.S.o:
${AVRCC} ${CFLAGS} -x assembler-with-cpp -c $< -o $@
# "-x assembler-with-cpp" should not be necessary since this is the default
# file type for the .S (with capital S) extension. However, upper case
# characters are not always preserved on Windows. To ensure WinAVR
# compatibility define the file type manually.
.c.s:
${AVRCC} ${CFLAGS} -S $< -o $@
program: all fuse_tiny2313
${AVRFLASH} -p ${MCU} -c ${AVRDUDE_PROGRAMMER} -U flash:w:main.hex:i
# Fuse low byte:
# 0xef = 1 1 1 0 1 1 1 1
# ^ ^ \+/ \--+--/
# | | | +------- CKSEL 3..0 (clock selection -> crystal @ 12 MHz)
# | | +--------------- SUT 1..0 (BOD enabled, fast rising power)
# | +------------------ CKOUT (clock output on CKOUT pin -> disabled)
# +-------------------- CKDIV8 (divide clock by 8 -> don't divide)
#
# Fuse high byte:
# 0xdb = 1 1 0 1 1 0 1 1
# ^ ^ ^ ^ \-+-/ ^
# | | | | | +---- RSTDISBL (disable external reset -> enabled)
# | | | | +-------- BODLEVEL 2..0 (brownout trigger level -> 2.7V)
# | | | +-------------- WDTON (watchdog timer always on -> disable)
# | | +---------------- SPIEN (enable serial programming -> enabled)
# | +------------------ EESAVE (preserve EEPROM on Chip Erase -> not preserved)
# +-------------------- DWEN (debug wire enable)
fuse_tiny2313: # only needed for attiny2313
${AVRFLASH} -p ${MCU} -c ${AVRDUDE_PROGRAMMER} -U hfuse:w:0xdb:m -U lfuse:w:0xef:m
clean:
rm -f main.hex main.lst main.obj main.cof main.list main.map main.eep.hex main.bin *.o usbdrv/*.o main.s usbdrv/oddebug.s usbdrv/usbdrv.s
# file targets:
main.bin: ${OBJECTS}
${AVRCC} ${CFLAGS} -o main.bin $(OBJECTS)
main.hex: main.bin
rm -f main.hex main.eep.hex
${AVROBJCOPY} -j .text -j .data -O ihex main.bin main.hex
./checksize main.bin
# do the checksize script as our last action to allow successful compilation
# on Windows with WinAVR where the Unix commands will fail.
disasm: main.bin
${AVROBJDUMP} -d main.bin
cpp:
${AVRCC} ${CFLAGS} -E main.c
.PHONY: all program fuse_tiny2313 clean disasm cpp
|