summaryrefslogtreecommitdiff
path: root/firmware/usbdrv/usbdrvasm16.inc
blob: 25b84e673848b34292fb6f940c6bc33d8be9e1fc (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
/* Name: usbdrvasm16.inc
 * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
 * Author: Christian Starkjohann
 * Creation Date: 2007-06-15
 * Tabsize: 4
 * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH
 * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
 */

/* Do not link this file! Link usbdrvasm.S instead, which includes the
 * appropriate implementation!
 */

/*
General Description:
This file is the 16 MHz version of the asssembler part of the USB driver. It
requires a 16 MHz crystal (not a ceramic resonator and not a calibrated RC
oscillator).

See usbdrv.h for a description of the entire driver.

Since almost all of this code is timing critical, don't change unless you
really know what you are doing! Many parts require not only a maximum number
of CPU cycles, but even an exact number of cycles!
*/

;max stack usage: [ret(2), YL, SREG, YH, bitcnt, shift, x1, x2, x3, x4, cnt] = 12 bytes
;nominal frequency: 16 MHz -> 10.6666666 cycles per bit, 85.333333333 cycles per byte
; Numbers in brackets are clocks counted from center of last sync bit
; when instruction starts

USB_INTR_VECTOR:
;order of registers pushed: YL, SREG YH, [sofError], bitcnt, shift, x1, x2, x3, x4, cnt
    push    YL                  ;[-25] push only what is necessary to sync with edge ASAP
    in      YL, SREG            ;[-23]
    push    YL                  ;[-22]
    push    YH                  ;[-20]
;----------------------------------------------------------------------------
; Synchronize with sync pattern:
;----------------------------------------------------------------------------
;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K]
;sync up with J to K edge during sync pattern -- use fastest possible loops
;The first part waits at most 1 bit long since we must be in sync pattern.
;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to
;waitForJ, ensure that this prerequisite is met.
waitForJ:
    inc     YL
    sbis    USBIN, USBMINUS
    brne    waitForJ        ; just make sure we have ANY timeout
waitForK:
;The following code results in a sampling window of < 1/4 bit which meets the spec.
    sbis    USBIN, USBMINUS     ;[-15]
    rjmp    foundK              ;[-14]
    sbis    USBIN, USBMINUS
    rjmp    foundK
    sbis    USBIN, USBMINUS
    rjmp    foundK
    sbis    USBIN, USBMINUS
    rjmp    foundK
    sbis    USBIN, USBMINUS
    rjmp    foundK
    sbis    USBIN, USBMINUS
    rjmp    foundK
#if USB_COUNT_SOF
    lds     YL, usbSofCount
    inc     YL
    sts     usbSofCount, YL
#endif  /* USB_COUNT_SOF */
#ifdef USB_SOF_HOOK
    USB_SOF_HOOK
#endif
    rjmp    sofError
foundK:                         ;[-12]
;{3, 5} after falling D- edge, average delay: 4 cycles [we want 5 for center sampling]
;we have 1 bit time for setup purposes, then sample again. Numbers in brackets
;are cycles from center of first sync (double K) bit after the instruction
    push    bitcnt              ;[-12]
;   [---]                       ;[-11]
    lds     YL, usbInputBufOffset;[-10]
;   [---]                       ;[-9]
    clr     YH                  ;[-8]
    subi    YL, lo8(-(usbRxBuf));[-7] [rx loop init]
    sbci    YH, hi8(-(usbRxBuf));[-6] [rx loop init]
    push    shift               ;[-5]
;   [---]                       ;[-4]
    ldi     bitcnt, 0x55        ;[-3] [rx loop init]
    sbis    USBIN, USBMINUS     ;[-2] we want two bits K (sample 2 cycles too early)
    rjmp    haveTwoBitsK        ;[-1]
    pop     shift               ;[0] undo the push from before
    pop     bitcnt              ;[2] undo the push from before
    rjmp    waitForK            ;[4] this was not the end of sync, retry
; The entire loop from waitForK until rjmp waitForK above must not exceed two
; bit times (= 21 cycles).

;----------------------------------------------------------------------------
; push more registers and initialize values while we sample the first bits:
;----------------------------------------------------------------------------
haveTwoBitsK:
    push    x1              ;[1]
    push    x2              ;[3]
    push    x3              ;[5]
    ldi     shift, 0        ;[7]
    ldi     x3, 1<<4        ;[8] [rx loop init] first sample is inverse bit, compensate that
    push    x4              ;[9] == leap

    in      x1, USBIN       ;[11] <-- sample bit 0
    andi    x1, USBMASK     ;[12]
    bst     x1, USBMINUS    ;[13]
    bld     shift, 7        ;[14]
    push    cnt             ;[15]
    ldi     leap, 0         ;[17] [rx loop init]
    ldi     cnt, USB_BUFSIZE;[18] [rx loop init]
    rjmp    rxbit1          ;[19] arrives at [21]

;----------------------------------------------------------------------------
; Receiver loop (numbers in brackets are cycles within byte after instr)
;----------------------------------------------------------------------------

; duration of unstuffing code should be 10.66666667 cycles. We adjust "leap"
; accordingly to approximate this value in the long run.

unstuff6:
    andi    x2, USBMASK ;[03]
    ori     x3, 1<<6    ;[04] will not be shifted any more
    andi    shift, ~0x80;[05]
    mov     x1, x2      ;[06] sampled bit 7 is actually re-sampled bit 6
    subi    leap, -1    ;[07] total duration = 11 bits -> subtract 1/3
    rjmp    didUnstuff6 ;[08]

unstuff7:
    ori     x3, 1<<7    ;[09] will not be shifted any more
    in      x2, USBIN   ;[00] [10]  re-sample bit 7
    andi    x2, USBMASK ;[01]
    andi    shift, ~0x80;[02]
    subi    leap, 2     ;[03] total duration = 10 bits -> add 1/3
    rjmp    didUnstuff7 ;[04]

unstuffEven:
    ori     x3, 1<<6    ;[09] will be shifted right 6 times for bit 0
    in      x1, USBIN   ;[00] [10]
    andi    shift, ~0x80;[01]
    andi    x1, USBMASK ;[02]
    breq    se0         ;[03]
    subi    leap, -1    ;[04] total duration = 11 bits -> subtract 1/3
    nop2                ;[05]
    rjmp    didUnstuffE ;[06]

unstuffOdd:
    ori     x3, 1<<5    ;[09] will be shifted right 4 times for bit 1
    in      x2, USBIN   ;[00] [10]
    andi    shift, ~0x80;[01]
    andi    x2, USBMASK ;[02]
    breq    se0         ;[03]
    subi    leap, -1    ;[04] total duration = 11 bits -> subtract 1/3
    nop2                ;[05]
    rjmp    didUnstuffO ;[06]

rxByteLoop:
    andi    x1, USBMASK ;[03]
    eor     x2, x1      ;[04]
    subi    leap, 1     ;[05]
    brpl    skipLeap    ;[06]
    subi    leap, -3    ;1 one leap cycle every 3rd byte -> 85 + 1/3 cycles per byte
    nop                 ;1
skipLeap:
    subi    x2, 1       ;[08]
    ror     shift       ;[09]
didUnstuff6:
    cpi     shift, 0xfc ;[10]
    in      x2, USBIN   ;[00] [11] <-- sample bit 7
    brcc    unstuff6    ;[01]
    andi    x2, USBMASK ;[02]
    eor     x1, x2      ;[03]
    subi    x1, 1       ;[04]
    ror     shift       ;[05]
didUnstuff7:
    cpi     shift, 0xfc ;[06]
    brcc    unstuff7    ;[07]
    eor     x3, shift   ;[08] reconstruct: x3 is 1 at bit locations we changed, 0 at others
    st      y+, x3      ;[09] store data
rxBitLoop:
    in      x1, USBIN   ;[00] [11] <-- sample bit 0/2/4
    andi    x1, USBMASK ;[01]
    eor     x2, x1      ;[02]
    andi    x3, 0x3f    ;[03] topmost two bits reserved for 6 and 7
    subi    x2, 1       ;[04]
    ror     shift       ;[05]
    cpi     shift, 0xfc ;[06]
    brcc    unstuffEven ;[07]
didUnstuffE:
    lsr     x3          ;[08]
    lsr     x3          ;[09]
rxbit1:
    in      x2, USBIN   ;[00] [10] <-- sample bit 1/3/5
    andi    x2, USBMASK ;[01]
    breq    se0         ;[02]
    eor     x1, x2      ;[03]
    subi    x1, 1       ;[04]
    ror     shift       ;[05]
    cpi     shift, 0xfc ;[06]
    brcc    unstuffOdd  ;[07]
didUnstuffO:
    subi    bitcnt, 0xab;[08] == addi 0x55, 0x55 = 0x100/3
    brcs    rxBitLoop   ;[09]

    subi    cnt, 1      ;[10]
    in      x1, USBIN   ;[00] [11] <-- sample bit 6
    brcc    rxByteLoop  ;[01]
    rjmp    overflow

macro POP_STANDARD ; 14 cycles
    pop     cnt
    pop     x4
    pop     x3
    pop     x2
    pop     x1
    pop     shift
    pop     bitcnt
    endm
macro POP_RETI     ; 7 cycles
    pop     YH
    pop     YL
    out     SREG, YL
    pop     YL
    endm

#include "asmcommon.inc"

; USB spec says:
; idle = J
; J = (D+ = 0), (D- = 1)
; K = (D+ = 1), (D- = 0)
; Spec allows 7.5 bit times from EOP to SOP for replies

bitstuffN:
    eor     x1, x4          ;[5]
    ldi     x2, 0           ;[6]
    nop2                    ;[7]
    nop                     ;[9]
    out     USBOUT, x1      ;[10] <-- out
    rjmp    didStuffN       ;[0]
    
bitstuff6:
    eor     x1, x4          ;[5]
    ldi     x2, 0           ;[6] Carry is zero due to brcc
    rol     shift           ;[7] compensate for ror shift at branch destination
    rjmp    didStuff6       ;[8]

bitstuff7:
    ldi     x2, 0           ;[2] Carry is zero due to brcc
    rjmp    didStuff7       ;[3]


sendNakAndReti:
    ldi     x3, USBPID_NAK  ;[-18]
    rjmp    sendX3AndReti   ;[-17]
sendAckAndReti:
    ldi     cnt, USBPID_ACK ;[-17]
sendCntAndReti:
    mov     x3, cnt         ;[-16]
sendX3AndReti:
    ldi     YL, 20          ;[-15] x3==r20 address is 20
    ldi     YH, 0           ;[-14]
    ldi     cnt, 2          ;[-13]
;   rjmp    usbSendAndReti      fallthrough

;usbSend:
;pointer to data in 'Y'
;number of bytes in 'cnt' -- including sync byte [range 2 ... 12]
;uses: x1...x4, btcnt, shift, cnt, Y
;Numbers in brackets are time since first bit of sync pattern is sent
;We don't match the transfer rate exactly (don't insert leap cycles every third
;byte) because the spec demands only 1.5% precision anyway.
usbSendAndReti:             ; 12 cycles until SOP
    in      x2, USBDDR      ;[-12]
    ori     x2, USBMASK     ;[-11]
    sbi     USBOUT, USBMINUS;[-10] prepare idle state; D+ and D- must have been 0 (no pullups)
    in      x1, USBOUT      ;[-8] port mirror for tx loop
    out     USBDDR, x2      ;[-7] <- acquire bus
; need not init x2 (bitstuff history) because sync starts with 0
    ldi     x4, USBMASK     ;[-6] exor mask
    ldi     shift, 0x80     ;[-5] sync byte is first byte sent
txByteLoop:
    ldi     bitcnt, 0x35    ;[-4] [6] binary 0011 0101
txBitLoop:
    sbrs    shift, 0        ;[-3] [7]
    eor     x1, x4          ;[-2] [8]
    out     USBOUT, x1      ;[-1] [9] <-- out N
    ror     shift           ;[0] [10]
    ror     x2              ;[1]
didStuffN:
    cpi     x2, 0xfc        ;[2]
    brcc    bitstuffN       ;[3]
    lsr     bitcnt          ;[4]
    brcc    txBitLoop       ;[5]
    brne    txBitLoop       ;[6]

    sbrs    shift, 0        ;[7]
    eor     x1, x4          ;[8]
didStuff6:
    out     USBOUT, x1      ;[-1] [9] <-- out 6
    ror     shift           ;[0] [10]
    ror     x2              ;[1]
    cpi     x2, 0xfc        ;[2]
    brcc    bitstuff6       ;[3]
    ror     shift           ;[4]
didStuff7:
    ror     x2              ;[5]
    sbrs    x2, 7           ;[6]
    eor     x1, x4          ;[7]
    nop                     ;[8]
    cpi     x2, 0xfc        ;[9]
    out     USBOUT, x1      ;[-1][10] <-- out 7
    brcc    bitstuff7       ;[0] [11]
    ld      shift, y+       ;[1]
    dec     cnt             ;[3]
    brne    txByteLoop      ;[4]
;make SE0:
    cbr     x1, USBMASK     ;[5] prepare SE0 [spec says EOP may be 21 to 25 cycles]
    lds     x2, usbNewDeviceAddr;[6]
    lsl     x2              ;[8] we compare with left shifted address
    subi    YL, 20 + 2      ;[9] Only assign address on data packets, not ACK/NAK in x3
    sbci    YH, 0           ;[10]
    out     USBOUT, x1      ;[11] <-- out SE0 -- from now 2 bits = 22 cycles until bus idle
;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm:
;set address only after data packet was sent, not after handshake
    breq    skipAddrAssign  ;[0]
    sts     usbDeviceAddr, x2; if not skipped: SE0 is one cycle longer
skipAddrAssign:
;end of usbDeviceAddress transfer
    ldi     x2, 1<<USB_INTR_PENDING_BIT;[2] int0 occurred during TX -- clear pending flag
    USB_STORE_PENDING(x2)   ;[3]
    ori     x1, USBIDLE     ;[4]
    in      x2, USBDDR      ;[5]
    cbr     x2, USBMASK     ;[6] set both pins to input
    mov     x3, x1          ;[7]
    cbr     x3, USBMASK     ;[8] configure no pullup on both pins
    ldi     x4, 4           ;[9]
se0Delay:
    dec     x4              ;[10] [13] [16] [19]
    brne    se0Delay        ;[11] [14] [17] [20]
    out     USBOUT, x1      ;[21] <-- out J (idle) -- end of SE0 (EOP signal)
    out     USBDDR, x2      ;[22] <-- release bus now
    out     USBOUT, x3      ;[23] <-- ensure no pull-up resistors are active
    rjmp    doReturn