MSP430FR5994: support DMX on eUSCI_A1 and eUSCI_A2 as well

3 files changed, 130 insertions, 10 deletions

diff --git a/src/arch/msp430fr5994lp/driver/dmx1.cc b/src/arch/msp430fr5994lp/driver/dmx1.cc
new file mode 100644
index 0000000..cad965b
--- /dev/null
+++ b/src/arch/msp430fr5994lp/driver/dmx1.cc
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2022 Birte Kristina Friesel
+ *
+ * SPDX-License-Identifier: BSD-2-Clause
+ */
+#include <msp430.h>
+#include "arch.h"
+#include "driver/dmx1.h"
+#include "driver/gpio.h"
+
+/*
+ * Baud rate calculation according to datasheet:
+ * N := f_{BRCLK} / Baudrate = F_CPU / 115200 in our case
+ * if N <= 16: OS16 = 0, UCBR0 = int(N)
+ * if N > 16: OS16 = 1, UCBR0 = int(N/16), UCBRF0 = int(((n/16) - int(n/16)) * 16) = int(N)%16
+ * Set UCBRS0 according to table 21-4
+ */
+
+void DMX1::setup()
+{
+	UCA1CTLW0 |= UCSWRST;
+#if F_CPU == 16000000UL
+	// 16M / 250000 == 64 -> UCOS16 = 1, UCBR0 = 4, UCBRF0 = 0, UCBRS0 = 0x00
+	UCA1CTLW0 = UCSWRST | UCSPB | UCSSEL__SMCLK; // MSB first, 8 data bits, 2 stop bits
+	UCA1MCTLW = UCOS16;
+	UCA1BR0 = 4;
+#else
+#error Unsupported F_CPU
+#endif
+
+	UCA1IRCTL = 0;
+	UCA1ABCTL = 0;
+
+	P2SEL0 &= ~BIT5;
+	P2SEL1 |= BIT5;
+	P2DIR |= BIT5;
+
+	UCA1CTLW0 &= ~UCSWRST;
+}
+
+void DMX1::write()
+{
+	// Disable UART for reset and mark signals
+	UCA1CTLW0 |= UCSWRST;
+	P2SEL1 &= ~BIT5;
+	gpio.output(GPIO::p2_5, 0);
+	arch.delay_us(88); // break / reset
+	gpio.output(GPIO::p2_5, 1);
+	arch.delay_us(8); // mark
+	P2SEL1 |= BIT5;
+	UCA1CTLW0 &= ~UCSWRST; // causes line to go high
+	for (unsigned short i = 0; i < num_frames; i++) {
+		while (!(UCA1IFG & UCTXIFG));
+		UCA1TXBUF = frames[i];
+	}
+	for (unsigned short i = 0; i < 258 - num_frames; i++) {
+		while (!(UCA1IFG & UCTXIFG));
+		UCA1TXBUF = 0;
+	}
+}
+
+DMX1 dmx1;
diff --git a/src/arch/msp430fr5994lp/driver/dmx2.cc b/src/arch/msp430fr5994lp/driver/dmx2.cc
new file mode 100644
index 0000000..e7d7766
--- /dev/null
+++ b/src/arch/msp430fr5994lp/driver/dmx2.cc
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2022 Birte Kristina Friesel
+ *
+ * SPDX-License-Identifier: BSD-2-Clause
+ */
+#include <msp430.h>
+#include "arch.h"
+#include "driver/dmx2.h"
+#include "driver/gpio.h"
+
+/*
+ * Baud rate calculation according to datasheet:
+ * N := f_{BRCLK} / Baudrate = F_CPU / 115200 in our case
+ * if N <= 16: OS16 = 0, UCBR0 = int(N)
+ * if N > 16: OS16 = 1, UCBR0 = int(N/16), UCBRF0 = int(((n/16) - int(n/16)) * 16) = int(N)%16
+ * Set UCBRS0 according to table 21-4
+ */
+
+void DMX2::setup()
+{
+	UCA2CTLW0 |= UCSWRST;
+#if F_CPU == 16000000UL
+	// 16M / 250000 == 64 -> UCOS16 = 1, UCBR0 = 4, UCBRF0 = 0, UCBRS0 = 0x00
+	UCA2CTLW0 = UCSWRST | UCSPB | UCSSEL__SMCLK; // MSB first, 8 data bits, 2 stop bits
+	UCA2MCTLW = UCOS16;
+	UCA2BR0 = 4;
+#else
+#error Unsupported F_CPU
+#endif
+
+	UCA2IRCTL = 0;
+	UCA2ABCTL = 0;
+
+	P5SEL0 |= BIT4;
+	P5SEL1 &= ~BIT4;
+	P5DIR |= BIT4;
+
+	UCA2CTLW0 &= ~UCSWRST;
+}
+
+void DMX2::write()
+{
+	// Disable UART for reset and mark signals
+	UCA2CTLW0 |= UCSWRST;
+	P5SEL0 &= ~BIT4;
+	gpio.output(GPIO::p5_4, 0);
+	arch.delay_us(88); // break / reset
+	gpio.output(GPIO::p5_4, 1);
+	arch.delay_us(8); // mark
+	P5SEL0 |= BIT4;
+	UCA2CTLW0 &= ~UCSWRST; // causes line to go high
+	for (unsigned short i = 0; i < num_frames; i++) {
+		while (!(UCA2IFG & UCTXIFG));
+		UCA2TXBUF = frames[i];
+	}
+	for (unsigned short i = 0; i < 258 - num_frames; i++) {
+		while (!(UCA2IFG & UCTXIFG));
+		UCA2TXBUF = 0;
+	}
+}
+
+DMX2 dmx2;
diff --git a/src/arch/msp430fr5994lp/driver/dmx.cc b/src/arch/msp430fr5994lp/driver/dmx3.cc
index 3fc52bf..a401fff 100644
--- a/src/arch/msp430fr5994lp/driver/dmx.cc
+++ b/src/arch/msp430fr5994lp/driver/dmx3.cc
@@ -5,7 +5,7 @@
  */
 #include <msp430.h>
 #include "arch.h"
-#include "driver/dmx.h"
+#include "driver/dmx3.h"
 #include "driver/gpio.h"
 
 /*
@@ -16,7 +16,7 @@
  * Set UCBRS0 according to table 21-4
  */
 
-void DMX::setup()
+void DMX3::setup()
 {
 	UCA3CTLW0 |= UCSWRST;
 #if F_CPU == 16000000UL
@@ -38,7 +38,7 @@ void DMX::setup()
 	UCA3CTLW0 &= ~UCSWRST;
 }
 
-void DMX::write()
+void DMX3::write()
 {
 	// Disable UART for reset and mark signals
 	UCA3CTLW0 |= UCSWRST;
@@ -49,18 +49,14 @@ void DMX::write()
 	arch.delay_us(8); // mark
 	P6SEL0 |= BIT0;
 	UCA3CTLW0 &= ~UCSWRST; // causes line to go high
-	for (unsigned char i = 0; i < 16; i++) {
+	for (unsigned short i = 0; i < num_frames; i++) {
 		while (!(UCA3IFG & UCTXIFG));
 		UCA3TXBUF = frames[i];
 	}
-	for (unsigned char i = 0; i < 241; i++) {
-		while (!(UCA3IFG & UCTXIFG));
-		UCA3TXBUF = 0;
-	}
-	for (unsigned char i = 0; i < 255; i++) {
+	for (unsigned short i = 0; i < 258 - num_frames; i++) {
 		while (!(UCA3IFG & UCTXIFG));
 		UCA3TXBUF = 0;
 	}
 }
 
-DMX dmx;
+DMX3 dmx3;